AD5381BSTZ-5KL2 - 40-Channel 12-Bit DAC | Analog Devices
料号： AD5381BSTZ-5KL2 ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $25.43 | $25.43 |
| 10 | $23.12 | $231.20 |
| 100 | $20.87 | $2,087.00 |
| 500 | $18.56 | $9,280.00 |
| 1,000 | $16.34 | $16,340.00 |
AD5381BSTZ-5KL2 概述
A digital-to-analog converter (DAC) is an electronic component that converts digital binary data into an analog voltage or current. The AD5381 is a denseDAC, integrating 40 DAC channels in a single package, which reduces board space and system cost compared to using multiple lower-channel-count DACs. It belongs to the family of data converters, which are essential in bridging the digital and analog domains in mixed-signal systems. The AD5381's high channel density and integrated reference make it a key component in multichannel control and calibration systems.
Key features of the AD5381BSTZ-5KL2 include 12-bit resolution, 40 independent output channels, rail-to-rail output amplifiers, and a programmable reference. The device offers a settling time of 8 µs typical, ensuring fast response in dynamic applications. It also includes a power-on reset to zero-scale, ensuring safe startup conditions. The channel monitor function allows external monitoring of any channel without disturbing the output, which is valuable for system diagnostics.
Technically, the AD5381 uses a segmented architecture with an internal precision reference, achieving excellent linearity and low noise. The device operates over a temperature range of -40°C to +105°C, making it suitable for industrial environments. The LQFP-100 package provides a compact footprint while allowing adequate thermal dissipation. The digital interface supports both parallel and serial modes, with the SER/PAR pin selecting the mode, and the SPI/I2C pin (Pin 97) enabling the serial interface when tied low.
Typical applications include industrial process control (e.g., valve and actuator control), automatic test equipment (ATE) for precise voltage generation, and medical instrumentation such as patient monitoring systems. The AD5381's 40 channels allow it to drive multiple analog outputs simultaneously, reducing component count and improving system reliability.
When designing with the AD5381, ensure proper decoupling of the AVDD and DVDD supplies with 10 µF and 0.1 µF capacitors placed close to the pins. The reference output should be buffered if external loads are connected. The MON_OUT pin can be used to monitor channel outputs, but care must be taken to avoid loading the monitored channel.
直接替换替代料： AD5381BSTZ-5KL2 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： AD5381BSTZ-5KL2 （相同外形与封装尺寸） ——差异在于 Internal Reference, Supply Voltage, Resolution, Operating Temperature Range, Power-On Reset.
快速对比工具——选择替代料号进行并排对比：
AD5381BSTZ-5
✅ 直接替换✓ 有现货
$15.9 / 个
查看数据手册 →AD5381BSTZ-3
✅ 直接替换✓ 有现货
$46.83 / 个
查看数据手册 →AD5380BSTZ-5
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
AD5382BSTZ-5
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
AD5383BSTZ-5
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
AD5384BSTZ-5
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
AD5381BSTZ-5KL2 最大额定值与电气特性
| 分辨率 | 12 bits |
| Number of Channels | 40 |
| 电源电压 | 5 V single supply |
| 输出类型 | Voltage - buffered |
| Output Amplifier | Rail-to-rail |
| Internal Reference | 1.25 V / 2.5 V programmable, 10 ppm/°C |
| Settling Time | 8 µs typical |
| 接口 | Parallel, SPI, DSP, MICROWIRE |
| 封装 | 100-lead LQFP (14x14 mm) |
| 工作温度范围 | -40°C to +105°C |
| Power-On Reset | Zero-scale |
| Channel Monitor | Yes (MON_OUT pin) |
| 安装类型 | Surface Mount |
| RoHS 状态 | Compliant |
AD5381BSTZ-5KL2 引脚配置
| 引脚 1 | VOUT0 — Analog output channel 0 |
| 引脚 2 | VOUT1 — Analog output channel 1 |
| 引脚 3 | VOUT2 — Analog output channel 2 |
| 引脚 4 | VOUT3 — Analog output channel 3 |
| 引脚 5 | VOUT4 — Analog output channel 4 |
| 引脚 6 | VOUT5 — Analog output channel 5 |
| 引脚 7 | VOUT6 — Analog output channel 6 |
| 引脚 8 | VOUT7 — Analog output channel 7 |
| 引脚 9 | VOUT8 — Analog output channel 8 |
| 引脚 10 | VOUT9 — Analog output channel 9 |
| 引脚 11 | VOUT10 — Analog output channel 10 |
| 引脚 12 | VOUT11 — Analog output channel 11 |
| 引脚 13 | VOUT12 — Analog output channel 12 |
| 引脚 14 | VOUT13 — Analog output channel 13 |
| 引脚 15 | VOUT14 — Analog output channel 14 |
| 引脚 16 | VOUT15 — Analog output channel 15 |
| 引脚 17 | VOUT16 — Analog output channel 16 |
| 引脚 18 | VOUT17 — Analog output channel 17 |
| 引脚 19 | VOUT18 — Analog output channel 18 |
| 引脚 20 | VOUT19 — Analog output channel 19 |
| 引脚 21 | VOUT20 — Analog output channel 20 |
| 引脚 22 | VOUT21 — Analog output channel 21 |
| 引脚 23 | VOUT22 — Analog output channel 22 |
| 引脚 24 | VOUT23 — Analog output channel 23 |
| 引脚 25 | VOUT24 — Analog output channel 24 |
| 引脚 26 | VOUT25 — Analog output channel 25 |
| 引脚 27 | VOUT26 — Analog output channel 26 |
| 引脚 28 | VOUT27 — Analog output channel 27 |
| 引脚 29 | VOUT28 — Analog output channel 28 |
| 引脚 30 | VOUT29 — Analog output channel 29 |
| 引脚 31 | VOUT30 — Analog output channel 30 |
| 引脚 32 | VOUT31 — Analog output channel 31 |
| 引脚 33 | VOUT32 — Analog output channel 32 |
| 引脚 34 | VOUT33 — Analog output channel 33 |
| 引脚 35 | VOUT34 — Analog output channel 34 |
| 引脚 36 | VOUT35 — Analog output channel 35 |
| 引脚 37 | VOUT36 — Analog output channel 36 |
| 引脚 38 | VOUT37 — Analog output channel 37 |
| 引脚 39 | VOUT38 — Analog output channel 38 |
| 引脚 40 | VOUT39 — Analog output channel 39 |
| 引脚 41 | AVDD — Analog supply voltage |
| 引脚 42 | AVSS — Analog ground |
| 引脚 43 | DVDD — Digital supply voltage |
| 引脚 44 | DGND — Digital ground |
| 引脚 45 | REFIN/REFOUT — Reference input/output |
| 引脚 46 | MON_OUT — Channel monitor output |
| 引脚 47 | SER/PAR — Serial/parallel interface select |
| 引脚 48 | SPI/I2C — SPI or I2C select (Pin 97) |
| 引脚 49 | CS — Chip select |
| 引脚 50 | SCLK — Serial clock |
| 引脚 51 | SDIN — Serial data input |
| 引脚 52 | SDO — Serial data output |
| 引脚 53 | LDAC — Load DAC |
| 引脚 54 | CLR — Clear |
| 引脚 55 | RESET — Reset |
| 引脚 56 | A0-A9 — Address pins |
| 引脚 57 | D0-D11 — Parallel data pins |
| 引脚 58 | WR — Write strobe |
| 引脚 59 | RD — Read strobe |
| 引脚 60 | BUSY — Busy indicator |
典型应用
AD5381BSTZ-5KL2 适用于 6 应用s: Industrial Process Control, Automatic Test Equipment (ATE), Medical Instrumentation, Telecommunications Infrastructure, Audio and Video Equipment, Automotive Electronics.
Industrial Process Control
The AD5381BSTZ-5KL2 provides 40 independent 12-bit analog outputs for precise control of valves, actuators, and transducers in industrial automation. Its rail-to-rail output amplifiers and 5 V single-supply operation simplify interface to standard 0-5 V control loops. The integrated reference ensures stable operation over temperature, while the channel monitor allows real-time diagnostics without disturbing outputs. With a settling time of 8 µs, it supports fast update rates required in closed-loop control systems. The LQFP-100 package fits compact PLC modules, and the serial interface reduces wiring complexity in distributed control networks.
推荐
Automatic Test Equipment (ATE)
In ATE systems, the AD5381BSTZ-5KL2 generates precise voltage levels for device-under-test (DUT) stimulus and calibration. Its 40 channels allow simultaneous driving of multiple test pins, reducing test time. The programmable reference (1.25 V/2.5 V) provides flexibility for different test voltage ranges. The channel monitor function enables verification of output levels without additional multiplexing hardware. The device's 12-bit resolution and 8 µs settling time meet the accuracy and speed requirements of production test. The parallel interface supports high-speed data transfer from the test controller, while the serial mode simplifies connection to SPI-based systems.
推荐
Medical Instrumentation
The AD5381BSTZ-5KL2 is used in medical devices such as patient monitors and diagnostic equipment to generate analog control signals and calibration voltages. Its 40 channels can drive multiple transducers and display elements simultaneously. The low drift internal reference (10 ppm/°C) ensures stable output over the operating temperature range, critical for accurate patient measurements. The rail-to-rail outputs allow full-scale voltage swings from a 5 V supply, compatible with many medical sensor interfaces. The device's small LQFP-100 package is suitable for compact portable devices. The serial interface reduces pin count, simplifying PCB layout in space-constrained designs.
推荐
Telecommunications Infrastructure
In telecom base stations and networking equipment, the AD5381BSTZ-5KL2 provides bias voltages and control signals for RF components, attenuators, and filters. Its 40 channels allow independent adjustment of multiple parameters, such as gain and phase, in beamforming and calibration circuits. The device's low noise and high linearity ensure minimal signal degradation. The programmable reference enables precise voltage scaling for different RF components. The serial interface (SPI/DSP) is ideal for connection to DSPs and FPGAs commonly used in telecom systems. The wide temperature range (-40°C to +105°C) supports outdoor installations.
推荐
Audio and Video Equipment
The AD5381BSTZ-5KL2 can be used in professional audio mixers and video processing equipment to control analog gain stages, filters, and level adjustments. Its 40 channels provide ample control signals for multi-channel audio systems. The rail-to-rail outputs and low noise ensure high-fidelity signal paths. The device's fast settling time (8 µs) supports real-time adjustments in dynamic audio environments. The integrated reference reduces external component count, simplifying design. The parallel interface allows direct connection to DSPs for rapid updates. The LQFP-100 package is suitable for rack-mounted equipment.
推荐
Automotive Electronics
In automotive systems, the AD5381BSTZ-5KL2 is used for calibration and control of sensors, actuators, and infotainment systems. Its 40 channels can drive multiple analog outputs for dashboard displays, climate control, and battery management. The device operates over -40°C to +105°C, suitable for under-hood and cabin environments. The rail-to-rail outputs interface directly with many automotive loads. The integrated reference ensures stable performance over temperature and supply variations. The serial interface reduces wiring harness complexity. The LQFP-100 package is robust for automotive PCB assembly.
推荐
推荐产品汇总
工程参考数据： AD5381BSTZ-5KL2 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | AD5381BSTZ-5 | AD5381BSTZ-3 | AD5380BSTZ-5 | AD5382BSTZ-5 | AD5383BSTZ-5 | AD5384BSTZ-5 |
|---|---|---|---|---|---|---|---|
| Package | 100-lead LQFP | 100-lead LQFP | 100-lead LQFP | 100-lead LQFP | 100-lead LQFP | 100-lead LQFP | 100-lead LQFP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Resolution | 12 bits | 12 bits | 12 bits | 14 bits | 14 bits | 12 bits | 14 bits |
| Number of Channels | 40 | 40 | 40 | 40 | 32 | 32 | 40 |
| Supply Voltage | 5 V | 5 V | 3 V | 5 V | 5 V | 5 V | 5 V |
| Settling Time | 8 µs | 8 µs | 8 µs | 10 µs | 10 µs | 8 µs | 10 µs |
| Internal Reference | 1.25 V/2.5 V, 10 ppm/°C | 1.25 V/2.5 V, 10 ppm/°C | 1.25 V/2.5 V, 10 ppm/°C | 1.25 V/2.5 V, 10 ppm/°C | 1.25 V/2.5 V, 10 ppm/°C | 1.25 V/2.5 V, 10 ppm/°C | 1.25 V/2.5 V, 10 ppm/°C |
| Interface | Parallel, SPI, DSP, MICROWIRE | Parallel, SPI, DSP, MICROWIRE | Parallel, SPI, DSP, MICROWIRE | Parallel, SPI, DSP, MICROWIRE | Parallel, SPI, DSP, MICROWIRE | Parallel, SPI, DSP, MICROWIRE | Parallel, SPI, DSP, MICROWIRE |
关键差异点
- 40-channel density in a single LQFP-100 package （对比 AD5382BSTZ-5 (32 channels))
- 12-bit resolution with 8 µs settling time （对比 AD5380BSTZ-5 (14-bit, 10 µs))
- 5 V single-supply operation with rail-to-rail outputs （对比 AD5381BSTZ-3 (3 V supply))
设计说明
Decouple the AVDD and DVDD pins with 10 µF and 0.1 µF capacitors placed as close to the pins as possible. Use separate analog and digital ground planes to minimize noise coupling. The AD5381 operates from a single 5 V supply; ensure the supply is clean and stable to maintain DAC accuracy.
For the LQFP-100 package, use a solid ground plane under the device to aid thermal dissipation and reduce parasitic inductance. Route analog output traces away from digital lines to prevent crosstalk. Keep the reference input/output traces short and shielded if possible.
Ensure the SER/PAR pin is set correctly for the desired interface mode. In serial mode, tie the SPI/I2C pin (Pin 97) low to enable SPI. Do not leave the LDAC pin floating; tie it low for immediate updates or use it for synchronized updates. Verify the power-on reset state is zero-scale to avoid unexpected outputs.
合规信息
RoHS compliance indicated by 'Z' suffix in part number. Other compliance data not specified in provided sources.
