Analog Devices

AD600JRZ - Dual 35 MHz VGA Amplifier | Analog Devices

料号: AD600JRZ ✓ 量产中
±4.75 V to ±5.25 V Vdss 16-lead SOIC Package
最小起订量: 1 |

AD600JRZ 概述

The Analog Devices AD600JRZ is a dual-channel voltage-controlled variable gain amplifier optimized for ultrasound imaging and other wideband signal-processing systems. Each of its two independent channels supports analog gain control, 35 MHz bandwidth, and operation from dual ±4.75 V to ±5.25 V supplies. The device is packaged in a 16-lead SOIC suitable for conventional surface-mount PCB assembly.

A variable gain amplifier, or VGA, is an amplifier whose gain can be adjusted by an external control voltage. In the signal-chain hierarchy, a VGA belongs to the broader amplifier category and provides controllable amplification between a sensor or receiver and a downstream ADC, display, or diagnostic processing system. The AD600 family combines low noise, wide bandwidth, and precise gain adjustment for applications requiring signal amplitude normalization before further processing.

The AD600JRZ provides two independent amplifier channels, a 35 MHz bandwidth rating, and analog voltage-controlled gain. It is specified for a 0°C to 70°C operating range. Its dual-supply operating span of ±4.75 V to ±5.25 V supports centered bipolar signal paths, while the 16-lead SOIC provides a compact surface-mount footprint. Separate channel control allows a two-channel system to adjust left-right, differential, quadrature, or other paired signal paths independently.

Each channel uses an external control voltage to establish its gain, making the device suitable for closed-loop time-gain-control or automatic-gain-control architectures. Ultrasound systems commonly require rapid adjustment as echo depth changes because reflected-signal attenuation increases with distance. The 35 MHz bandwidth also makes the amplifier relevant to instrumentation and communication systems that must retain wideband signal fidelity while varying signal amplitude.

Typical uses include ultrasound receiver channels, medical diagnostic imaging, dual-channel receiver front ends, signal-strength conditioning, and wideband measurement systems. Independent gain control is especially useful when two channels carry different signal amplitudes or require coordinated but nonidentical attenuation. The device can also precede an ADC when analog gain adjustment must occur before conversion.

PCB design should preserve short, impedance-controlled signal paths and provide local supply bypassing at both amplifier channels. Because the AD600JRZ operates from dual supplies, ground and supply routing must accommodate bipolar signals without introducing ground offsets or unintended coupling between channels. Use the manufacturer pin-description table and recommended application circuit when assigning tracks and decoupling capacitors.

This product page combines manufacturer product information, exact-MPN pricing evidence, drop-in replacement analysis, application guidance, and design notes for engineers evaluating the AD600JRZ in precision wideband signal chains.

直接替换替代料: AD600JRZ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: AD600JRZ (相同外形与封装尺寸) ——差异在于 Package.

Analog Devices
Package: 16-pin SOIC
对比 AD600JRZ →

AD600ARZ

✅ 直接替换 ⚠️ 规格未核验
📦 16-lead SOIC
Operating range expands from 0°C to 70°C on AD600JRZ to -40°C to +85°C on AD600A; gain-control and electrical details require pin-by-pin confirmation

📋 参考替代料(不在目录中)

AD600AR

✅ 直接替换 ⚠️ 规格未核验
📦 16-lead SOIC
AD600AR is specified from -40°C to +85°C versus 0°C to 70°C for AD600JRZ, a 40°C wider total operating-temperature span

📋 参考替代料(不在目录中)

AD600JRZ 最大额定值与电气特性

Amplifier Type Dual voltage-controlled variable gain amplifier
Number of Channels 2 channels
Number of Amplifiers 2 amplifiers
Gain Control Analog voltage control
Bandwidth 35 MHz
Supply Voltage Range ±4.75 V to ±5.25 V
Total Supply Voltage 9.5 V to 10.5 V
工作温度范围 0°C to 70°C
封装 16-lead SOIC
安装类型 Surface mount
Process Technology CMOS
Maximum Seated Height 2.65 mm

AD600JRZ 16-lead soic 引脚配置指南

AD600JRZ(16-lead soic 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

AD600JRZ 的 16-lead soic 封装引脚图

暂无详细引脚数据: AD600JRZ.

请参阅 数据手册 以查看完整引脚配置。

典型应用

AD600JRZ 适用于 6 应用s: Ultrasound Receiver Front Ends, Medical Diagnostic Imaging, Automatic Gain Control Receivers, Wideband Instrumentation Signal Chains, Two-Channel Communications Receivers, ADC Front-End Amplification.

🩺

Ultrasound Receiver Front Ends

The AD600JRZ fits dual ultrasound receiver channels that require signal-dependent attenuation before digitization. Its two independent channels can control paired receive paths, while the 35 MHz bandwidth accommodates high-bandwidth echo signals. Operating from ±4.75 V to ±5.25 V supports a centered bipolar signal chain, which is useful when downstream circuitry handles both positive and negative waveform excursions. The adjustable analog gain is particularly valuable in time-gain-control systems, where attenuation changes with propagation depth. The 16-lead SOIC simplifies assembly into multilayer boards, although decoupling and controlled return paths remain essential for preserving low-noise wideband behavior.

💊

Medical Diagnostic Imaging

The AD600JRZ can condition two wideband channels in medical diagnostic imaging equipment where signal amplitude varies substantially with tissue depth or sensor position. Two independent gain controls allow a system to normalize separate receive paths before ADC conversion. Its 35 MHz bandwidth preserves fast transient and echo information, while dual supplies support a bipolar signal path centered around ground. The commercial 0°C to 70°C rating fits many indoor diagnostic systems, although enclosure temperature rises and medical qualification requirements must be assessed independently. Grounding, isolation, noise, and patient-safety boundaries require system-level validation beyond the amplifier specifications.

📡

Automatic Gain Control Receivers

The AD600JRZ is appropriate for automatic-gain-control receiver paths in which an external control loop adjusts analog signal level according to detected amplitude. Its voltage-controlled gain supports continuous adjustment without changing the downstream ADC range, and its dual-channel architecture can handle two monitored signal paths. A 35 MHz bandwidth rating provides margin for wideband modulation or pulsed waveforms, while dual ±4.75 V to ±5.25 V operation accommodates bipolar signals. The control-loop stability, permissible adjustment rate, gain-control voltage range, and settling behavior must be confirmed from the family data sheet before implementation.

🔧

Wideband Instrumentation Signal Chains

The AD600JRZ can be used when a measurement instrument must accommodate inputs with widely varying amplitudes while retaining a 35 MHz signal path. Two channels allow related or differential signals to be conditioned with independently controlled gain, which can simplify calibration when one input is a reference or monitor signal. The CMOS implementation and dual bipolar supplies support compact, high-bandwidth instrumentation designs. The 16-lead SOIC allows conventional surface-mount routing, but sensitive analog inputs require short traces, adequate return-plane continuity, and careful separation from digital control or switching circuitry. Calibration and settling behavior should be evaluated across the complete gain-control range.

🌐

Two-Channel Communications Receivers

The AD600JRZ can serve independent I and Q channels in a wideband communications receiver when analog gain control is advantageous ahead of conversion. Matching two amplifiers in one package can simplify channel-layout symmetry, and the 35 MHz bandwidth rating supports several wideband signal formats. Dual ±4.75 V to ±5.25 V supplies provide headroom for centered bipolar waveforms, while voltage control permits receiver-level gain adjustment. Engineers should verify phase and magnitude matching, gain-control monotonicity, allowable control bandwidth, and output swing for the selected modulation. RF front-end noise and distortion contributions must also be included when setting system-level gain.

🖥️

ADC Front-End Amplification

The AD600JRZ can be placed before an ADC when the converter input range must accommodate a wide range of analog signal amplitudes. Adjusting gain in the analog domain reduces the risk of ADC clipping and can improve use of the converter's dynamic range. Two channels support simultaneous or differential signal conditioning, and the 35 MHz bandwidth allows substantial signal bandwidth. Dual supplies support a centered signal path, while the 16-lead SOIC package is compatible with standard PCB assembly. The system designer must confirm ADC input bandwidth, settling requirements, output swing, noise, and the timing of the gain-control loop so that gain changes do not create sampling artifacts.

推荐产品汇总

AD600ARZ Wider-temperature AD600-family dual VGA in the same 16-lead SOIC family 用于: Ultrasound Receiver Front Ends, Medical Diagnostic Imaging, Automatic Gain Control Receivers, Wideband Instrumentation Signal Chains, Two-Channel Communications Receivers, ADC Front-End Amplification AD600AR AD600-family alternative for broader-temperature receiver designs 用于: Ultrasound Receiver Front Ends, Wideband Instrumentation Signal Chains, ADC Front-End Amplification
What is the AD600JRZ?
The AD600JRZ is a dual-channel, voltage-controlled variable gain amplifier with a 35 MHz bandwidth rating. Analog Devices describes the AD600 family as a low-noise, wideband VGA for ultrasound imaging and other systems requiring precise gain control. The AD600JRZ is offered in a 16-lead SOIC and operates from dual ±4.75 V to ±5.25 V supplies.
What are the key specifications of AD600JRZ that engineers should know?
The AD600JRZ combines two independent voltage-controlled amplifier channels, 35 MHz bandwidth, and a 0°C to 70°C operating range in a 16-lead SOIC. Its specified supply range is ±4.75 V to ±5.25 V. According to the Analog Devices AD600 product information, the dual-channel architecture supports independent gain adjustment for paired ultrasound, instrumentation, and wideband receiver signal paths.
Where can I download the AD600JRZ datasheet PDF?
The official AD600 documentation is available through the Analog Devices product page at https://www.analog.com/en/products/ad600.html, where the manufacturer provides the AD600 data sheet and product resources. Use the AD600 family document for electrical characteristics, gain-control behavior, pin descriptions, and the recommended application circuit, while confirming that the specified commercial temperature range applies to AD600JRZ.
Where can I find the AD600JRZ pinout?
The AD600JRZ uses a 16-lead SOIC, and its authoritative pin assignments are shown in the Analog Devices AD600 data sheet. Because an exact numbered pin list is not published in the product-page excerpt, use the manufacturer pin-description table before assigning PCB nets. Pay particular attention to dual supplies, channel gain-control inputs, signal inputs, outputs, and the exposed analog signal-path connections.
What is the operating voltage range of AD600JRZ?
The AD600JRZ operates from ±4.75 V to ±5.25 V, equivalent to a total supply span of 9.5 V to 10.5 V. The Analog Devices product information identifies the part as a dual-supply CMOS variable gain amplifier. This range supports centered bipolar signals, so both positive and negative supply rails must be present and properly decoupled during operation.
What is the bandwidth and operating temperature of AD600JRZ?
The AD600JRZ has a 35 MHz bandwidth rating and a specified operating temperature range of 0°C to 70°C. Analog Devices lists the device as a dual, low-noise, wideband variable gain amplifier. The bandwidth is suitable for wideband receiver paths, while the temperature range makes the J-rated ordering code relevant for commercial-temperature equipment.
Where can I buy AD600JRZ online?
The AD600JRZ can be sourced through the XAIPART Request a Quote form on this page, where the exact ordering code and required quantity should be stated. The component is also listed by authorized distribution channels, but purchasing decisions should account for the 16-lead SOIC package, dual ±4.75 V to ±5.25 V supplies, and the required operating-temperature grade.
What is the price of AD600JRZ?
Use the XAIPART Request a Quote form on this page for the current AD600JRZ price, quantity breaks, stock status, and lead time. Pricing is maintained as structured commercial data rather than embedded in technical prose so that it remains current. Specify the exact AD600JRZ ordering code and package quantity to avoid confusion with AD600 family tape-and-reel order codes.
What is the lead time and stock status for AD600JRZ?
Current lead time, minimum order quantity, and stock status for AD600JRZ should be requested through the XAIPART Request a Quote form on this page. The exact orderable MPN is AD600JRZ, not AD600JRZ-RL or AD600JRZ-R7, because those suffixes identify different reel or packaging configurations. The manufacturer product page confirms the AD600 family is available for current sourcing.
AD600JRZ vs AD600ARZ - which is better for a 0 to 70°C system?
AD600JRZ is the more natural selection for a system specified for 0°C to 70°C. The AD600JRZ operating-temperature rating is 0°C to 70°C, while the AD600A family variant is specified from -40°C to +85°C and is available in a 16-lead SOIC. If the finished equipment must operate below 0°C or above 70°C, verify the complete AD600A variant specifications and qualification requirements.
When should I choose AD600JRZ over another AD600-family device?
Choose AD600JRZ when the design needs two independent voltage-controlled channels, a 35 MHz bandwidth rating, dual ±4.75 V to ±5.25 V supplies, and operation from 0°C to 70°C. The standard AD600 family is appropriate when these requirements match, but an AD600A variant may be needed for wider industrial temperature coverage. Confirm gain-range and control-voltage details against the manufacturer data sheet before final selection.
Is AD600JRZ suitable for ultrasound receiver channels?
Yes, AD600JRZ is suitable for dual-channel ultrasound receiver paths requiring controllable gain and wideband signal handling. Analog Devices specifically describes the AD600 family as optimized for ultrasound imaging systems. Its two channels permit independent gain adjustment, while the 35 MHz bandwidth supports high-bandwidth echo signals; system-level timing, gain-control range, and channel matching still require validation.
What can replace AD600JRZ?
The closest documented drop-in candidate is AD600ARZ because it remains in the 16-lead SOIC AD600 family and supports a broader -40°C to +85°C rating. However, the J and A ordering variants use different temperature grades, so replacement requires verification of gain characteristics, control polarity, and every pin connection. No cross-brand drop-in replacement could be confirmed from the available cross-reference information.
Can AD600JRZ replace AD600JR without PCB changes?
AD600JR may use the same 16-lead SOIC family architecture, but the exact AD600JR ordering code and its pinout should be checked against the AD600 data sheet before substitution. The AD600JRZ operating range is 0°C to 70°C, and the ordering suffix can also denote packaging or temperature distinctions. Confirm the complete orderable part number and mechanical drawing rather than relying on the base family name.
Is AD600JRZ the same as AD602JRZ?
No. Both devices belong to the dual wideband variable-gain-amplifier family and may use related packaging, but their programmed gain behavior is different. The AD600 is intended for a 40 dB gain range, whereas the AD602 provides a 60 dB gain range. Their gain-control slopes and usable dynamic range therefore differ, so AD602JRZ is not a like-for-like drop-in replacement for AD600JRZ.

工程参考数据: AD600JRZ ——对比、设计指导和合规信息。

选型指南

Choose AD600JRZ for a dual-channel wideband design whose required operating range is 0°C to 70°C and whose architecture benefits from independent analog gain adjustment. Its 35 MHz bandwidth, dual ±4.75 V to ±5.25 V supplies, and 16-lead SOIC package suit ultrasound, medical imaging, communications, instrumentation, and ADC front-end applications. Consider AD600ARZ or AD600AR instead when equipment must operate below 0°C or above 70°C; both use the broader -40°C to +85°C AD600A temperature specification. Before substitution, compare the gain-control equation, control-voltage range, gain accuracy, bandwidth, noise, distortion, and every pin assignment in the manufacturer data sheet. AD602-family devices are not drop-in equivalents because their 60 dB gain range differs from the AD600 family’s 40 dB range. If cross-brand replacement is required, perform a complete pin, voltage, bandwidth, gain-control, and thermal review rather than relying only on package similarity.

与替代料对比

参数 本产品 AD600ARZ AD600AR
Brand Analog Devices Analog Devices Analog Devices
Package 16-lead SOIC 16-lead SOIC 16-lead SOIC
Amplifier Type Variable gain amplifier Variable gain amplifier Variable gain amplifier
Channel Count 2 channels 2 channels 2 channels
Operating Temperature Range 0°C to 70°C -40°C to +85°C -40°C to +85°C
Gain Range 40 dB 40 dB 40 dB

关键差异点

  • Commercial-temperature ordering option (对比 AD600ARZ)
  • Dual independent amplifier channels (对比 AD600AR)
  • Wideband gain adjustment in a compact surface-mount package (对比 AD600AR)

设计说明

Route the two amplifier channels symmetrically when their signals are intended to remain matched. Keep input, gain-control, and output traces short, use a continuous ground reference beneath the analog paths, and place local bypass capacitors at the device supply pins. The 35 MHz bandwidth makes trace geometry, return-path continuity, and supply-impedance control significant. Follow the decoupling values and layout shown in the AD600 manufacturer application circuit rather than relying on generic high-frequency layout conventions.

The AD600JRZ requires dual ±4.75 V to ±5.25 V supplies, giving a total allowable span of 9.5 V to 10.5 V. Provide separate, low-impedance connections to the positive and negative supply pins, with local high-frequency and bulk decoupling placed close to the package. Confirm output swing, input range, and power-up sequence against the manufacturer electrical-characteristics table before applying signals; incorrect rail sequencing or inadequate bypassing can impair gain control and wideband performance.

Treat the gain-control and analog signal paths as high-bandwidth analog nets. Avoid routing them beside switching nodes, high-current return paths, or digital clock lines, and provide a quiet ground region around the device. If the gain-control signal is generated by a DAC or digital system, isolate it from sensitive inputs and verify that control-bandwidth requirements match the 35 MHz signal bandwidth. Terminate unused inputs according to the manufacturer recommendations and avoid floating control nodes.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for the exact AD600JRZ ordering code. AEC-Q100 is not applicable because this is a commercial-temperature analog amplifier rather than an automotive-qualified device.

数据核验日期: 2026-11-17 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

AD600JRZ datasheet AD600JRZ pinout AD600JRZ datasheet pdf AD600JRZ equivalent AD600JRZ replacement AD600JRZ cross reference AD600JRZ vs AD600ARZ AD600JRZ footprint AD600JRZ price AD600JRZ stock Analog Devices AD600JRZ AD600JRZ 35 MHz amplifier AD600JRZ 16-SOIC AD600JRZ ultrasound amplifier AD600JRZ application circuit

相关元器件 & 术语

Analog Devices AD600 AD600JRZ AD600ARZ AD600AR AD602 variable gain amplifier VGA amplifier IC semiconductor analog signal chain voltage-controlled gain dual-channel amplifier 35 MHz bandwidth ultrasound imaging medical diagnostic imaging automatic gain control ADC front end dual bipolar supply 16-lead SOIC SOIC family surface-mount package SMD
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情