AD600JRZ - Dual 35 MHz VGA Amplifier | Analog Devices
MPN: AD600JRZ ✓ 啟用中AD600JRZ 概覽
A variable gain amplifier, or VGA, is an amplifier whose gain can be adjusted by an external control voltage. In the signal-chain hierarchy, a VGA belongs to the broader amplifier category and provides controllable amplification between a sensor or receiver and a downstream ADC, display, or diagnostic processing system. The AD600 family combines low noise, wide bandwidth, and precise gain adjustment for applications requiring signal amplitude normalization before further processing.
The AD600JRZ provides two independent amplifier channels, a 35 MHz bandwidth rating, and analog voltage-controlled gain. It is specified for a 0°C to 70°C operating range. Its dual-supply operating span of ±4.75 V to ±5.25 V supports centered bipolar signal paths, while the 16-lead SOIC provides a compact surface-mount footprint. Separate channel control allows a two-channel system to adjust left-right, differential, quadrature, or other paired signal paths independently.
Each channel uses an external control voltage to establish its gain, making the device suitable for closed-loop time-gain-control or automatic-gain-control architectures. Ultrasound systems commonly require rapid adjustment as echo depth changes because reflected-signal attenuation increases with distance. The 35 MHz bandwidth also makes the amplifier relevant to instrumentation and communication systems that must retain wideband signal fidelity while varying signal amplitude.
Typical uses include ultrasound receiver channels, medical diagnostic imaging, dual-channel receiver front ends, signal-strength conditioning, and wideband measurement systems. Independent gain control is especially useful when two channels carry different signal amplitudes or require coordinated but nonidentical attenuation. The device can also precede an ADC when analog gain adjustment must occur before conversion.
PCB design should preserve short, impedance-controlled signal paths and provide local supply bypassing at both amplifier channels. Because the AD600JRZ operates from dual supplies, ground and supply routing must accommodate bipolar signals without introducing ground offsets or unintended coupling between channels. Use the manufacturer pin-description table and recommended application circuit when assigning tracks and decoupling capacitors.
This product page combines manufacturer product information, exact-MPN pricing evidence, drop-in replacement analysis, application guidance, and design notes for engineers evaluating the AD600JRZ in precision wideband signal chains.
直接替換替代品,適用於 AD600JRZ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: AD600JRZ (相同外形與佔位) — 差異在於 Package.
AD600ARZ
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
AD600AR
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
AD600JRZ 最大額定值與電氣特性
| Amplifier Type | Dual voltage-controlled variable gain amplifier |
| Number of Channels | 2 channels |
| Number of Amplifiers | 2 amplifiers |
| Gain Control | Analog voltage control |
| Bandwidth | 35 MHz |
| Supply Voltage Range | ±4.75 V to ±5.25 V |
| Total Supply Voltage | 9.5 V to 10.5 V |
| 工作溫度範圍 | 0°C to 70°C |
| 封裝 | 16-lead SOIC |
| 安裝類型 | Surface mount |
| Process Technology | CMOS |
| Maximum Seated Height | 2.65 mm |
AD600JRZ 16-lead soic 腳位配置指南
AD600JRZ(16-lead soic 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: AD600JRZ.
請參閱 資料表 以查看完整腳位配置。
典型應用
AD600JRZ 適用於 6 應用s: Ultrasound Receiver Front Ends, Medical Diagnostic Imaging, Automatic Gain Control Receivers, Wideband Instrumentation Signal Chains, Two-Channel Communications Receivers, ADC Front-End Amplification.
Ultrasound Receiver Front Ends
The AD600JRZ fits dual ultrasound receiver channels that require signal-dependent attenuation before digitization. Its two independent channels can control paired receive paths, while the 35 MHz bandwidth accommodates high-bandwidth echo signals. Operating from ±4.75 V to ±5.25 V supports a centered bipolar signal chain, which is useful when downstream circuitry handles both positive and negative waveform excursions. The adjustable analog gain is particularly valuable in time-gain-control systems, where attenuation changes with propagation depth. The 16-lead SOIC simplifies assembly into multilayer boards, although decoupling and controlled return paths remain essential for preserving low-noise wideband behavior.
推薦
Medical Diagnostic Imaging
The AD600JRZ can condition two wideband channels in medical diagnostic imaging equipment where signal amplitude varies substantially with tissue depth or sensor position. Two independent gain controls allow a system to normalize separate receive paths before ADC conversion. Its 35 MHz bandwidth preserves fast transient and echo information, while dual supplies support a bipolar signal path centered around ground. The commercial 0°C to 70°C rating fits many indoor diagnostic systems, although enclosure temperature rises and medical qualification requirements must be assessed independently. Grounding, isolation, noise, and patient-safety boundaries require system-level validation beyond the amplifier specifications.
推薦
Automatic Gain Control Receivers
The AD600JRZ is appropriate for automatic-gain-control receiver paths in which an external control loop adjusts analog signal level according to detected amplitude. Its voltage-controlled gain supports continuous adjustment without changing the downstream ADC range, and its dual-channel architecture can handle two monitored signal paths. A 35 MHz bandwidth rating provides margin for wideband modulation or pulsed waveforms, while dual ±4.75 V to ±5.25 V operation accommodates bipolar signals. The control-loop stability, permissible adjustment rate, gain-control voltage range, and settling behavior must be confirmed from the family data sheet before implementation.
推薦
Wideband Instrumentation Signal Chains
The AD600JRZ can be used when a measurement instrument must accommodate inputs with widely varying amplitudes while retaining a 35 MHz signal path. Two channels allow related or differential signals to be conditioned with independently controlled gain, which can simplify calibration when one input is a reference or monitor signal. The CMOS implementation and dual bipolar supplies support compact, high-bandwidth instrumentation designs. The 16-lead SOIC allows conventional surface-mount routing, but sensitive analog inputs require short traces, adequate return-plane continuity, and careful separation from digital control or switching circuitry. Calibration and settling behavior should be evaluated across the complete gain-control range.
推薦
Two-Channel Communications Receivers
The AD600JRZ can serve independent I and Q channels in a wideband communications receiver when analog gain control is advantageous ahead of conversion. Matching two amplifiers in one package can simplify channel-layout symmetry, and the 35 MHz bandwidth rating supports several wideband signal formats. Dual ±4.75 V to ±5.25 V supplies provide headroom for centered bipolar waveforms, while voltage control permits receiver-level gain adjustment. Engineers should verify phase and magnitude matching, gain-control monotonicity, allowable control bandwidth, and output swing for the selected modulation. RF front-end noise and distortion contributions must also be included when setting system-level gain.
推薦
ADC Front-End Amplification
The AD600JRZ can be placed before an ADC when the converter input range must accommodate a wide range of analog signal amplitudes. Adjusting gain in the analog domain reduces the risk of ADC clipping and can improve use of the converter's dynamic range. Two channels support simultaneous or differential signal conditioning, and the 35 MHz bandwidth allows substantial signal bandwidth. Dual supplies support a centered signal path, while the 16-lead SOIC package is compatible with standard PCB assembly. The system designer must confirm ADC input bandwidth, settling requirements, output swing, noise, and the timing of the gain-control loop so that gain changes do not create sampling artifacts.
推薦
推薦產品摘要
工程參考資料,適用於 AD600JRZ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | AD600ARZ | AD600AR |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Package | 16-lead SOIC | 16-lead SOIC | 16-lead SOIC |
| Amplifier Type | Variable gain amplifier | Variable gain amplifier | Variable gain amplifier |
| Channel Count | 2 channels | 2 channels | 2 channels |
| Operating Temperature Range | 0°C to 70°C | -40°C to +85°C | -40°C to +85°C |
| Gain Range | 40 dB | 40 dB | 40 dB |
主要差異化特點
- Commercial-temperature ordering option (對比AD600ARZ)
- Dual independent amplifier channels (對比AD600AR)
- Wideband gain adjustment in a compact surface-mount package (對比AD600AR)
設計說明
Route the two amplifier channels symmetrically when their signals are intended to remain matched. Keep input, gain-control, and output traces short, use a continuous ground reference beneath the analog paths, and place local bypass capacitors at the device supply pins. The 35 MHz bandwidth makes trace geometry, return-path continuity, and supply-impedance control significant. Follow the decoupling values and layout shown in the AD600 manufacturer application circuit rather than relying on generic high-frequency layout conventions.
The AD600JRZ requires dual ±4.75 V to ±5.25 V supplies, giving a total allowable span of 9.5 V to 10.5 V. Provide separate, low-impedance connections to the positive and negative supply pins, with local high-frequency and bulk decoupling placed close to the package. Confirm output swing, input range, and power-up sequence against the manufacturer electrical-characteristics table before applying signals; incorrect rail sequencing or inadequate bypassing can impair gain control and wideband performance.
Treat the gain-control and analog signal paths as high-bandwidth analog nets. Avoid routing them beside switching nodes, high-current return paths, or digital clock lines, and provide a quiet ground region around the device. If the gain-control signal is generated by a DAC or digital system, isolate it from sensitive inputs and verify that control-bandwidth requirements match the 35 MHz signal bandwidth. Terminate unused inputs according to the manufacturer recommendations and avoid floating control nodes.
合規資訊
No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for the exact AD600JRZ ordering code. AEC-Q100 is not applicable because this is a commercial-temperature analog amplifier rather than an automotive-qualified device.