Analog Devices

AD842SH - 80MHz Wide-Bandwidth Operational Amplifier | Analog Devices

料号: AD842SH ✓ 量产中
1.5 mV maximum Vdss 8 µA Id TO-8 style, 12 leads Package
最小起订量: 1 |

AD842SH 概述

Analog Devices AD842SH is a wide-bandwidth, single-channel operational amplifier with an 80 MHz gain-bandwidth product, 375 V/µs slew rate, and low input offset voltage. The device is specified for an 18 V maximum total supply voltage and is housed in a hermetic TO-8-style, 12-lead package for precision instrumentation and signal-conditioning applications.

An operational amplifier is an analog signal-processing IC that amplifies the voltage difference between its inverting and non-inverting inputs while offering high open-loop gain and low output impedance. The AD842 belongs to the operational-amplifier hierarchy within amplifier ICs and power-management systems used for instrumentation, industrial control, communications, and high-speed analog signal acquisition.

The AD842SH combines wide bandwidth with precision DC characteristics. Key ratings include 115 dB open-loop gain, 9 nV/√Hz input noise at 1 kHz, 1.5 mV maximum input offset voltage, and 14 µV/°C input offset drift. Its 375 V/µs slew rate supports accurate reproduction of high-frequency, large-amplitude signals, while the 8 µA input bias current is suitable for many high-impedance source designs.

The amplifier is fabricated using Analog Devices' junction-isolated complementary bipolar process. This process combines DC precision with wideband AC performance. The 80 MHz gain-bandwidth product supports closed-loop bandwidth near 10 MHz when configured for a gain of 8, making the device useful where conventional precision op amps cannot preserve signal amplitude at higher frequencies.

Typical uses include low-level instrumentation-amplifier front ends, precision signal conditioners, active filters, broadband measurement systems, and industrial analog interfaces. In a typical non-inverting or inverting amplifier, external resistors establish the closed-loop gain while the compensation capacitor selected for that gain controls frequency response and stability.

Design the AD842SH around its supply limits, input common-mode range, output swing, noise bandwidth, and required gain. Keep sensitive input and feedback nodes short, use stable reference and gain resistors, and place compensation components close to the relevant pins. Verify thermal rise and output drive at the lowest expected supply voltage because both can limit large-signal performance.

This page combines manufacturer specifications, package information, sourcing guidance, replacement considerations, and practical circuit-design notes. It helps engineers evaluate whether the AD842SH's 80 MHz bandwidth, 375 V/µs slew rate, 115 dB gain, and hermetic 12-lead TO-8 package satisfy a precision analog design before committing the component to a PCB or production BOM.

直接替换替代料: AD842SH ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

AD842JH

✅ 直接替换
📦 TO-8 style, 12 leads
Same AD842 family and TO-8-style 12-lead format, but the ordering grade may differ in qualification requirements

📋 参考替代料(不在目录中)

AD842SHZ

✅ 直接替换
📦 TO-8 style, 12 leads
Same-series AD842 ordering variant with matching package family; grade and screening differences require confirmation

📋 参考替代料(不在目录中)

AD842SH/883

✅ 直接替换
📦 TO-8 style, 12 leads
Same-series ordering variant with matching package family; MIL-STD screening differences may affect the original grade

📋 参考替代料(不在目录中)

AD842SQ

✅ 直接替换
Analog Devices
📦 TO-8 style, 12 leads
1 circuit · Wideband instrumentation operational amplifier · 80 MHz · 100 mA · 2 V/V

联系询价

查看数据手册 →

AD842SH 最大额定值与电气特性

Product Type Single-channel operational amplifier
Gain-Bandwidth Product 80 MHz
Slew Rate 375 V/µs
Open-Loop Gain 115 dB
Input Offset Voltage 1.5 mV maximum
Input Offset Drift 14 µV/°C maximum
Input Noise Density 9 nV/√Hz at 1 kHz
Input Bias Current 8 µA
Maximum Supply Voltage 18 V
工作温度范围 0°C to +70°C
封装 TO-8 style, 12 leads
安装类型 Through-hole
Process Technology Junction-isolated complementary bipolar process
Number of Channels 1 channel
RoHS 状态 Compliant

AD842SH to-8 style, 12 leads 引脚配置指南

AD842SH(to-8 style, 12 leads 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

AD842SH 的 to-8 style, 12 leads 封装引脚图

暂无详细引脚数据: AD842SH.

请参阅 数据手册 以查看完整引脚配置。

典型应用

AD842SH 适用于 6 应用s: Precision Instrumentation Front End, Active Analog Filters, Industrial Signal Conditioning, Broadband Measurement Systems, Communications Signal Interface, Precision Data Acquisition.

🏭

Precision Instrumentation Front End

The AD842SH fits low-level instrumentation front ends where sensor signals require accurate DC behavior without sacrificing bandwidth. Its 115 dB open-loop gain, 1.5 mV maximum input offset voltage, and 14 µV/°C offset drift help preserve small measurement signals through the amplifier stage. The 80 MHz gain-bandwidth product also supports transient content that would be attenuated by a slower precision amplifier. Configure the gain with low-noise resistors, select the compensation capacitor for the intended closed-loop gain, and verify the input common-mode range against the sensor output. The device's 375 V/µs slew rate provides additional margin when the amplified waveform contains sharp, low-amplitude transitions.

⚡

Active Analog Filters

The AD842SH is appropriate for active filtering stages that must retain small signals while processing higher-frequency components. Its 80 MHz gain-bandwidth product provides substantial loop bandwidth for moderate closed-loop gains, and the 375 V/µs slew rate helps limit large-signal distortion. Component tolerances in the feedback network determine the actual filter response, while the op amp's 9 nV/√Hz input noise at 1 kHz contributes to the output noise spectrum. Choose the gain and compensation network together, keep the summing node physically compact, and test stability with the intended source impedance. The hermetic TO-8-style, 12-lead package supports laboratory, industrial, and legacy instrument installations where through-hole construction is preferred.

🏭

Industrial Signal Conditioning

The AD842SH can condition low-level industrial process signals while providing the bandwidth needed for sensor and control-loop dynamics. Its 1.5 mV maximum input offset and 14 µV/°C drift limit static error, while its 80 MHz gain-bandwidth product avoids unnecessarily limiting dynamic response. Place the amplifier close to the sensor or connector when source impedance and cable noise are significant, and keep the return path continuous to reduce common-mode pickup. The 18 V maximum supply rating permits conventional bipolar rails, but the output must remain inside the load-dependent swing range. For factory equipment, qualify the exact operating-temperature grade and verify thermal performance across the expected ambient range before production release.

📺

Broadband Measurement Systems

The AD842SH is suitable for broadband measurement systems that combine high open-loop gain with rapid signal settling. The 80 MHz gain-bandwidth product allows useful closed-loop bandwidth at moderate gain, while the 375 V/µs slew rate helps preserve amplitude and phase behavior for fast waveforms. Its 9 nV/√Hz input noise at 1 kHz is important when the measured quantity is close to the noise floor. Use short feedback components, maintain symmetric routing where practical, and ensure the source and load impedances do not interfere with the selected compensation network. For oscilloscope-style analog channels, verify output swing, slew-limited bandwidth, and thermal rise at the maximum expected input amplitude.

🌐

Communications Signal Interface

The AD842SH can serve as an analog interface in communication equipment where received signals require linear amplification across a broad frequency range. Its 115 dB open-loop gain provides strong loop gain, while the 80 MHz gain-bandwidth product and 375 V/µs slew rate support higher-rate analog waveforms. The input noise density of 9 nV/√Hz at 1 kHz can matter in low-amplitude receiver channels. Maintain controlled impedance on the input path, use short ground returns, and decouple the supply pins close to the device. Designers should check the exact common-mode range, output swing, and stability requirements for the selected gain. The hermetic 12-lead package is particularly suitable for legacy communication and test equipment built with through-hole components.

🖥️

Precision Data Acquisition

The AD842SH is useful in precision data-acquisition chains that amplify sensor outputs ahead of an ADC or measurement converter. Low input offset and drift reduce static gain error, while the 80 MHz gain-bandwidth product allows the amplifier to preserve fast events without adding a bandwidth bottleneck. At 9 nV/√Hz input noise density at 1 kHz, source resistance and resistor selection can materially influence total noise, so use low-value thermal-noise resistors where appropriate. Keep the input connection short and place the input and feedback resistors close to the device. Confirm that the signal remains within the input common-mode range and that the output swing accommodates the converter reference and full-scale requirements.

推荐产品汇总

AD842JH Same-family TO-8-style operational amplifier candidate 用于: Precision Instrumentation Front End, Active Analog Filters, Industrial Signal Conditioning, Broadband Measurement Systems, Communications Signal Interface, Precision Data Acquisition AD842SHZ Same-series ordering variant for qualification review 用于: Precision Instrumentation Front End, Broadband Measurement Systems AD842SQ Same-series ordering variant for engineering review 用于: Active Analog Filters, Communications Signal Interface AD842SH/883 Screened same-series ordering variant for qualification review 用于: Industrial Signal Conditioning, Precision Data Acquisition
What is the AD842SH?
The AD842SH is a single-channel, wide-bandwidth operational amplifier from Analog Devices with an 80 MHz gain-bandwidth product and a 375 V/µs slew rate. It is manufactured in a hermetic TO-8-style, 12-lead package for precision and high-speed analog signal-processing systems. According to the manufacturer product page and datasheet, the device uses junction-isolated complementary bipolar technology to combine DC precision with wideband AC performance.
What is the operating voltage of AD842SH?
The AD842SH operates from a total supply voltage of up to 18 V, with the specified supply polarity applying to its positive and negative rails. Its 0°C to +70°C operating-temperature range identifies it as a commercial-temperature device. The manufacturer datasheet should be consulted for the exact input and output common-mode limits at each supply voltage, since those limits determine how much signal headroom remains near the rails.
What are the key specifications of AD842SH that engineers should know?
The AD842SH combines an 80 MHz gain-bandwidth product, 375 V/µs slew rate, 115 dB open-loop gain, 1.5 mV maximum input offset voltage, and 9 nV/√Hz input noise at 1 kHz. These ratings identify it as a precision, wide-bandwidth bipolar operational amplifier rather than a general-purpose low-noise part. According to Analog Devices documentation, it is particularly useful when both small-signal accuracy and high-frequency large-signal response are required.
Where can I download the AD842SH datasheet PDF?
The official AD842SH datasheet PDF is available directly from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD842.pdf. It contains the complete electrical characteristics, ordering guide, package drawings, and connection information. Use the pin-description table and package outline when assigning PCB connections, particularly because the AD842SH uses a 12-lead TO-8-style package rather than a modern surface-mount footprint.
Where can I find the AD842SH pinout?
The AD842SH pinout appears in the package-drawing and connection sections of the official Analog Devices AD842 datasheet. The component uses a hermetic TO-8-style package with 12 leads, so do not substitute a standard 8-pin TO-8 or SOIC pinout during PCB design. Use the numbered package drawing to assign inputs, power, offset null, and compensation connections, and cross-check every net against the exact grade being assembled.
Is the AD842SH suitable for precision instrumentation?
Yes, the AD842SH is suitable for precision instrumentation that also requires substantial bandwidth. Its 1.5 mV maximum input offset voltage, 14 µV/°C offset drift, 9 nV/√Hz input noise, and 115 dB open-loop gain support accurate low-level signal conditioning. The 80 MHz gain-bandwidth product and 375 V/µs slew rate are the differentiating features when the measured signal contains fast transients rather than only quasi-static sensor outputs.
What can replace the AD842SH?
The AD842JH is the closest same-series candidate identified for the AD842SH because it is also offered in the same TO-8-style 12-lead format, but a replacement must still be checked for grade, temperature range, screening, and exact pin compatibility. The AD842SHZ, AD842SH/883, and AD842SQ are related ordering variants rather than unconditional replacements. Confirm the manufacturer ordering guide and datasheet before treating any of them as a drop-in substitution.
Is AD842SH the same as AD842JH?
The AD842SH and AD842JH are closely related AD842 devices, but their ordering codes can denote different qualification, temperature, or screening requirements. Both are associated with the TO-8-style 12-lead family, making AD842JH the leading mechanical candidate for a drop-in review. It should be selected only after confirming that its electrical grade, environmental requirements, and lead configuration meet the original design assumptions.
When should I choose AD842SH over AD842JH?
Choose the AD842SH when the original bill of materials specifies that exact qualified ordering code and its screening or environmental requirements are essential. Choose AD842JH when its documented grade provides an acceptable substitute and the 12-lead package is mechanically unchanged. The decision should be based on the AD842 ordering guide rather than only the shared amplifier function, because package similarity alone does not establish equivalent qualification.
AD842SH vs AD842JH: which is better for a legacy instrument?
The AD842SH is preferable when maintaining the original legacy instrument requires the exact qualification level and ordering identity. The AD842JH may be suitable when its documented electrical and environmental ratings satisfy the instrument specification and its TO-8-style, 12-lead footprint is unchanged. Review offset voltage, temperature range, screening, and supply specifications before approving either part as a replacement.
What is the best Analog Devices equivalent for AD842SH?
The best identified Analog Devices candidate is the AD842JH because it belongs to the same AD842 family and uses the same TO-8-style, 12-lead package family. It is not automatically identical in qualification grade, so verify the ordering table and datasheet before substitution. No cross-brand equivalent is established as a guaranteed pin-to-pin replacement by the available manufacturer and cross-reference information.
How much power does the AD842SH dissipate?
The AD842SH dissipation depends on the actual supply voltage, quiescent current, output current, and output voltage, and those operating values should be taken from the manufacturer datasheet. Estimated: power dissipation equals total supply voltage multiplied by the average supply current for a directly comparable operating condition. Calculate worst-case loss at the highest supply voltage and hottest ambient temperature, then verify the hermetic TO-8 package can reject the resulting heat.
How should the AD842SH be decoupled and laid out?
Place each power-supply bypass capacitor directly beside its corresponding supply and ground pins, and keep input, feedback, and compensation traces short to reduce parasitic pickup and feedback delay. Use a solid ground return and avoid routing sensitive input traces beneath power and digital nets. Because the AD842SH has an 80 MHz gain-bandwidth product, a conventional layout that ignores trace capacitance can alter stability or channel response.
Where can I buy AD842SH and what is the lead time?
Use the Request a Quote form on this page to request current AD842SH availability, lead time, and MOQ for the exact ordering code and quantity. The form allows the request to be matched to the required hermetic TO-8-style, 12-lead package without relying on changing stock levels. Provide the target quantity, date code requirement, and any screening or documentation requirements with the request.
Is AD842SH in stock and what does it cost?
Current stock should be confirmed through the Request a Quote form on this page because quantity, date code, and screening requirements can change the available supply. Submit the exact AD842SH ordering code, required quantity, and acceptable date-code window for a current quotation. The form is the appropriate channel for a firm price, lead time, and stock confirmation for this exact packaged device.

工程参考数据: AD842SH ——对比、设计指导和合规信息。

选型指南

Choose the AD842SH when a legacy or precision analog design specifically calls for its ordering grade and requires the combination of an 80 MHz gain-bandwidth product, 375 V/µs slew rate, 115 dB open-loop gain, and hermetic TO-8-style 12-lead construction. It is especially useful for instrumentation, active filtering, signal conditioning, and broadband measurement stages where DC accuracy and large-signal bandwidth matter together. Consider AD842JH when its documented qualification and temperature grade meet the application and the 12-lead package remains unchanged. Review AD842SHZ, AD842SH/883, and AD842SQ by ordering code because their screening or grade treatments may differ. Do not select an 8-pin TO-8 or SOIC device solely from a similarity search; confirm every electrical limit, pin assignment, and qualification requirement against the Analog Devices datasheet before substitution.

与替代料对比

参数 本产品 AD842JH AD842SHZ AD842SH/883 AD842SQ
Package TO-8 style, 12 leads TO-8 style, 12 leads TO-8 style, 12 leads TO-8 style, 12 leads TO-8 style, 12 leads
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Product Family AD842 AD842 AD842 AD842 AD842
Special Ordering Feature SH ordering code JH ordering code Z ordering suffix 883 screening designation SQ ordering code

关键差异点

  • Wide-bandwidth precision in a hermetic package (对比 AD842JH)
  • Low-noise operation supports small-signal measurement (对比 AD842SQ)
  • Fast large-signal response (对比 AD842SH/883)

设计说明

Route the input, feedback, compensation, and ground paths as short as practical. The AD842SH's 80 MHz gain-bandwidth product makes parasitic capacitance and long feedback loops significant, especially at higher closed-loop gains. Place input and feedback resistors close to their associated pins, keep the compensation capacitor adjacent to the compensation pin, and provide a low-impedance ground return. Review the completed layout against the manufacturer's typical application circuit and evaluate stability across the intended source impedance.

Use separate, physically close bypass paths for the positive and negative supply pins to limit inductive impedance at high frequency. The device supports an 18 V maximum total supply voltage, but the usable input and output range also depends on the chosen rails. Confirm common-mode range, output swing, and stable operation at the minimum supply voltage before release. Decoupling capacitance and voltage ratings should be selected for the actual rail arrangement and transient environment.

Do not treat every AD842 ordering suffix as electrically and administratively interchangeable. The AD842JH, AD842SHZ, AD842SH/883, and AD842SQ may differ in qualification, screening, or ordering treatment even though they use the same TO-8-style 12-lead package family. Before substitution, compare the ordering guide, temperature range, offset-voltage limits, screening requirements, and pin assignments. Never adapt an 8-pin TO-8 or SOIC footprint to this 12-lead device.

合规信息

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The component listing identifies the AD842SH as RoHS compliant. The hermetic TO-8-style package and 0°C to +70°C specification are not automotive qualifications; no AEC-Q100 status applies.

数据核验日期: 2026-11-14 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

AD842SH datasheet AD842SH pinout AD842SH datasheet pdf AD842SH specifications AD842SH TO-8 12 pin AD842SH 80 MHz AD842SH 375 V/us AD842SH equivalent AD842SH replacement AD842SH vs AD842JH AD842SH price AD842SH stock

相关元器件 & 术语

Analog Devices AD842SH AD842JH AD842SHZ AD842SH/883 AD842SQ operational amplifier op amp wide-bandwidth amplifier precision amplifier amplifier IC analog signal conditioner junction-isolated complementary bipolar process 80 MHz gain-bandwidth product 375 V/µs slew rate 115 dB open-loop gain 9 nV/√Hz input noise density 1.5 mV input offset voltage 14 µV/°C input offset drift TO-8 style 12-lead package hermetic package through-hole mounting precision instrumentation active filter industrial signal conditioning
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情