AD9944KCP 12-Bit 25 MHz CCD Signal Processor | Analog Devices
料号: AD9944KCP ✓ 量产中AD9944KCP 概述
A CCD signal processor is an integrated analog front-end and timing controller used to extract image information from charge-coupled-device sensors. The AD9944KCP belongs to the sensor and detector interface category, where it conditions the CCD output, applies gain and offset correction, and provides the digital interface required by downstream image-processing electronics. This integration reduces the number of discrete components required in a CCD imaging chain while supporting portable and space-constrained equipment.
Key features include complete 10-bit and 12-bit operation, a 25 MHz processing capability, single 3 V operation, and typical power dissipation of 79 mW. The device is specifically intended for digital still cameras, digital video camcorders, PC cameras, portable CCD imaging devices, and CCTV cameras. Its integrated processing architecture allows the sensor output to be conditioned close to the image sensor, where shorter analog paths can reduce implementation complexity and improve system consistency.
The AD9944KCP is offered in a 32-lead LFCSP package, identified in the product information as QCC32 and LFCSP-32 with a 5 x 5 mm body and exposed-pad construction. The 3 V supply requirement supports portable imaging systems where low-voltage operation and low power consumption are important. The manufacturer describes the AD9943 and AD9944 as a common signal-processing family with typical dissipation of 79 mW, making the family suitable for compact camera modules and portable CCD imaging devices.
Typical applications include digital still cameras, digital video camcorders, PC cameras, portable CCD imaging devices, and CCTV cameras. In these systems, the device can process CCD timing and analog output information before data is transferred to a camera controller or image processor. The correct choice of timing, input, output, and power connections depends on the CCD sensor interface and the system clocking requirements, so the manufacturer data sheet should be used to implement the reference circuit and pin assignments.
A key design consideration is the exposed thermal pad and the high-speed nature of the signal path. Follow the manufacturer’s recommended decoupling, grounding, and layout guidance, and confirm that the PCB land pattern and exposed-pad connection match the 32-lead LFCSP package. Verify the sensor timing, reset levels, and required external components against the AD9944 data sheet before production release.
This page organizes the AD9944KCP’s identification, pricing, package information, application fit, and engineering guidance into a concise purchasing and design reference for engineers evaluating CCD signal-processing front ends.
直接替换替代料: AD9944KCP ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: AD9944KCP (相同外形与封装尺寸) ——差异在于 ADC Resolution, Device Type, Package.
AD9944KCPZ
✅ 直接替换📋 参考替代料(不在目录中)
AD9944KCPZRL
✅ 直接替换📋 参考替代料(不在目录中)
AD9945KCPZ
✅ 直接替换📋 参考替代料(不在目录中)
AD9945KCPZRL7
✅ 直接替换📋 参考替代料(不在目录中)
AD9944KCP 最大额定值与电气特性
| Device Type | CCD signal processor |
| 分辨率 | 10-bit and 12-bit |
| Processing Frequency | 25 MHz |
| 电源电压 | 3 V |
| Typical Power Dissipation | 79 mW |
| 封装 | 32-lead LFCSP, 5 x 5 mm |
| Package Designation | QCC32, MO-220-VHHD-2 |
| Input Type | Single-ended |
| Product Type | Specialized interface IC |
| Application Category | Sensor and detector interfaces |
| ADC Resolution | 12-bit |
| RoHS 状态 | Unknown |
| REACH Status | Unknown |
| AEC-Q100 Qualification | Not applicable |
AD9944KCP qcc32, mo-220-vhhd-2 引脚配置指南
AD9944KCP(qcc32, mo-220-vhhd-2 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: AD9944KCP.
请参阅 数据手册 以查看完整引脚配置。
典型应用
AD9944KCP 适用于 6 应用s: Digital Still Camera, Digital Video Camcorder, PC Camera, Portable CCD Imaging Device, CCTV Camera, CCD Imaging Module.
Digital Still Camera
The AD9944KCP fits a digital still camera because it combines complete 10-bit and 12-bit CCD signal processing with a 25 MHz operating capability in one 3 V device. By placing the processing function near the CCD output, the camera designer can reduce the number of separate signal-conditioning components and maintain a compact sensor-to-controller signal path. The family typically dissipates 79 mW, which is useful when the camera must operate from a small internal power budget. The implementation must follow the manufacturer’s timing and reference-circuit guidance, including the requirements of the selected CCD and the clocking arrangement.
推荐
Digital Video Camcorder
The AD9944KCP is suited to digital video camcorders that require a dedicated CCD signal-processing stage. Its 25 MHz capability supports high-speed CCD transfer and signal processing, while the complete 10-bit and 12-bit functionality provides a compact implementation for camera electronics. Operation from a single 3 V rail supports portable and handheld designs where power budget and board area are limited. The selected CCD’s timing requirements, output levels, and reset characteristics should be checked against the AD9944 data sheet before the circuit is released for production.
推荐
PC Camera
The AD9944KCP can provide the CCD front-end processing function in a compact PC camera. Integrating the CCD signal processor into a 3 V device helps reduce external circuitry and supports space-constrained USB or embedded imaging modules. The 12-bit processing path and 25 MHz operating capability are useful when the camera design requires a dedicated, deterministic signal chain between the CCD and the downstream controller. Because the device is designed around specific CCD timing and output interfaces, the camera designer must verify the sensor’s requirements, clocking, and recommended external components in the manufacturer documentation.
推荐
Portable CCD Imaging Device
The AD9944KCP is a practical choice for portable CCD imaging devices because the AD9943/AD9944 family operates from one 3 V supply and typically dissipates 79 mW. Its integrated 10-bit and 12-bit CCD signal-processing functionality allows a compact module to place conditioning close to the image sensor instead of distributing the analog chain across several boards. That architecture can simplify enclosure design and reduce the number of interconnections in a small imaging product. Thermal, grounding, and high-speed layout still require careful implementation using the manufacturer’s exposed-pad and reference-circuit guidance.
推荐
CCTV Camera
The AD9944KCP supports CCD-based CCTV camera designs by integrating the sensor signal-processing function into a dedicated 3 V device. The 25 MHz capability and complete 10-bit and 12-bit processing provide the core front end for a camera module that sends conditioned image data to a downstream controller. Integrating the function can simplify the analog section and make it easier to standardize the signal path across camera variants. For a deployed surveillance product, validate the CCD timing, clock jitter requirements, power sequencing, and thermal performance against the actual sensor and environmental operating conditions.
推荐
CCD Imaging Module
The AD9944KCP is appropriate for a modular CCD imaging front end that must provide deterministic signal conditioning close to the sensor. Its 32-lead LFCSP package, 3 V operation, and integrated 10-bit and 12-bit processing are useful when the module is intended to interface with a compact downstream image processor. The device can reduce discrete-component count while preserving a defined CCD timing and correction path. The module designer should follow the manufacturer’s PCB land pattern, exposed-pad thermal connection, decoupling, and grounding recommendations to preserve performance at 25 MHz.
推荐
推荐产品汇总
工程参考数据: AD9944KCP ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | AD9944KCPZ | AD9944KCPZRL | AD9945KCPZ | AD9945KCPZRL7 | AD9943KCP |
|---|---|---|---|---|---|---|
| Package | LFCSP-32, 5 x 5 mm | LFCSP-32, 5 x 5 mm | LFCSP-32, 5 x 5 mm | LFCSP-32, 5 x 5 mm | LFCSP-32, 5 x 5 mm | LFCSP-32, 5 x 5 mm |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Product Type | CCD signal processor | CCD signal processor | CCD signal processor | CCD signal processor | CCD signal processor | CCD signal processor |
关键差异点
- Complete CCD processing in one device (对比 AD9945KCPZ)
- Low-power 3 V operation (对比 AD9945KCPZRL7)
- Space-saving 32-lead LFCSP (对比 AD9944KCPZ)
设计说明
Use the 32-lead LFCSP package drawing in the manufacturer documentation to create the PCB land pattern, including the exposed thermal pad. Place the device close to the CCD signal source and route the high-speed clock and CCD outputs with short, controlled-impedance traces. The available product information identifies the package as QCC32, MO-220-VHHD-2, so the board footprint must be checked against that package rather than a generic 32-pin QFN library.
Design the supply network for the single 3 V operating rail and follow the manufacturer’s recommended decoupling arrangement. Keep the input capacitor path short and provide a low-impedance return to the device ground and exposed-pad connection. The AD9943/AD9944 family typically dissipates 79 mW, but the power budget should also include switching and interface circuitry that operates from the same rail.
Treat the CCD clock, data, and reset paths as high-speed signals. Use the manufacturer reference circuit for component values, termination, and timing, and avoid adding long traces or test-point stubs adjacent to sensitive nets. The 25 MHz processing capability makes clock distribution and return-path continuity important, particularly when the CCD and controller are located on separate boards.
Connect the exposed pad to a properly designed thermal copper area and follow the package-specific soldering and land-pattern guidance. Although the family typically dissipates 79 mW, thermal performance depends on the PCB copper area, adjacent heat sources, airflow, and the device’s operating condition. Validate the assembled board at the highest expected ambient temperature rather than relying only on the typical power figure.
合规信息
The available product information identifies the device as an Analog Devices IC and does not provide extractable RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements. Compliance fields therefore remain unknown.