Analog Devices

AD9944KCP 12-Bit 25 MHz CCD Signal Processor | Analog Devices

MPN: AD9944KCP ✓ Aktif
3 V Vdss 32-lead LFCSP, 5 x 5 mm Package 25 MHz Speed
MOQ: 1 |

AD9944KCP Ringkasan

The Analog Devices AD9944KCP is a complete 10-bit and 12-bit, 25 MHz CCD signal processor designed for high-speed imaging systems. It operates from a single 3 V power supply, typically dissipates 79 mW, and is packaged in a 32-lead LFCSP with a 5 x 5 mm footprint. The device combines analog CCD front-end processing, digital correction, programmable timing, and 12-bit signal-chain functionality for compact camera and video systems.

A CCD signal processor is an integrated analog front-end and timing controller used to extract image information from charge-coupled-device sensors. The AD9944KCP belongs to the sensor and detector interface category, where it conditions the CCD output, applies gain and offset correction, and provides the digital interface required by downstream image-processing electronics. This integration reduces the number of discrete components required in a CCD imaging chain while supporting portable and space-constrained equipment.

Key features include complete 10-bit and 12-bit operation, a 25 MHz processing capability, single 3 V operation, and typical power dissipation of 79 mW. The device is specifically intended for digital still cameras, digital video camcorders, PC cameras, portable CCD imaging devices, and CCTV cameras. Its integrated processing architecture allows the sensor output to be conditioned close to the image sensor, where shorter analog paths can reduce implementation complexity and improve system consistency.

The AD9944KCP is offered in a 32-lead LFCSP package, identified in the product information as QCC32 and LFCSP-32 with a 5 x 5 mm body and exposed-pad construction. The 3 V supply requirement supports portable imaging systems where low-voltage operation and low power consumption are important. The manufacturer describes the AD9943 and AD9944 as a common signal-processing family with typical dissipation of 79 mW, making the family suitable for compact camera modules and portable CCD imaging devices.

Typical applications include digital still cameras, digital video camcorders, PC cameras, portable CCD imaging devices, and CCTV cameras. In these systems, the device can process CCD timing and analog output information before data is transferred to a camera controller or image processor. The correct choice of timing, input, output, and power connections depends on the CCD sensor interface and the system clocking requirements, so the manufacturer data sheet should be used to implement the reference circuit and pin assignments.

A key design consideration is the exposed thermal pad and the high-speed nature of the signal path. Follow the manufacturer’s recommended decoupling, grounding, and layout guidance, and confirm that the PCB land pattern and exposed-pad connection match the 32-lead LFCSP package. Verify the sensor timing, reset levels, and required external components against the AD9944 data sheet before production release.

This page organizes the AD9944KCP’s identification, pricing, package information, application fit, and engineering guidance into a concise purchasing and design reference for engineers evaluating CCD signal-processing front ends.

Pilihan pengganti yang segera untuk AD9944KCP — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera AD9944KCP (sama faktor bentuk dan kaki) — berbeza dalam ADC Resolution, Device Type, Package.

Analog Devices
ADC Resolution: 10 bit
Device Type: Complete CCD signal processor
Package: 32-LFCSP-WQ (5 x 5 mm)
Bandingkan Dengan AD9944KCP →

AD9944KCPZ

✅ Masuk Drop-In
📦 LFCSP-32, 5 x 5 mm
Same AD9944 family and 12-bit LFCSP-32 package; ordering suffix and production-form differences must be confirmed

📋 Alternatif rujukan (tidak dalam katalog)

AD9944KCPZRL

✅ Masuk Drop-In
📦 LFCSP-32, 5 x 5 mm
Same AD9944 family and 32-VFQFN/LFCSP class package; reel and ordering details may differ

📋 Alternatif rujukan (tidak dalam katalog)

AD9945KCPZ

✅ Masuk Drop-In
📦 LFCSP-32, 5 x 5 mm
Related AD9945 family device with the same 32-LFCSP package class; functional and electrical differences require data-sheet verification

📋 Alternatif rujukan (tidak dalam katalog)

AD9945KCPZRL7

✅ Masuk Drop-In
📦 LFCSP-32, 5 x 5 mm
Related AD9945 family device in the 32-LFCSP package class; ordering, reel, and functional differences require confirmation

📋 Alternatif rujukan (tidak dalam katalog)

AD9943KCP

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
Analog Devices
📦 LFCSP-32, 5 x 5 mm
Complete CCD signal processor · 10 bit · 25 MHz · 1 channel · Interlaced and progressive-scan area CCD arrays · 3 V · Logic input · Logic output

Hubungi untuk harga

Lihat Datasheet →

AD9944KCP Penilaian maksimum & Ciri-ciri Elektrik

Device Type CCD signal processor
Pemecahkatan 10-bit and 12-bit
Processing Frequency 25 MHz
Tegangan Pemberi Arus 3 V
Typical Power Dissipation 79 mW
Kemasan 32-lead LFCSP, 5 x 5 mm
Package Designation QCC32, MO-220-VHHD-2
Input Type Single-ended
Product Type Specialized interface IC
Application Category Sensor and detector interfaces
ADC Resolution 12-bit
Status RoHS Unknown
REACH Status Unknown
AEC-Q100 Qualification Not applicable

Panduan Konfigurasi Pin AD9944KCP qcc32, mo-220-vhhd-2

Konfigurasi pin untuk AD9944KCP (qcc32, mo-220-vhhd-2 pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai qcc32, mo-220-vhhd-2 untuk AD9944KCP

Tiada data garisan pin yang diperoleh untuk AD9944KCP.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

AD9944KCP patut untuk 6 aplikasis: Digital Still Camera, Digital Video Camcorder, PC Camera, Portable CCD Imaging Device, CCTV Camera, CCD Imaging Module.

📱

Digital Still Camera

The AD9944KCP fits a digital still camera because it combines complete 10-bit and 12-bit CCD signal processing with a 25 MHz operating capability in one 3 V device. By placing the processing function near the CCD output, the camera designer can reduce the number of separate signal-conditioning components and maintain a compact sensor-to-controller signal path. The family typically dissipates 79 mW, which is useful when the camera must operate from a small internal power budget. The implementation must follow the manufacturer’s timing and reference-circuit guidance, including the requirements of the selected CCD and the clocking arrangement.

🎥

Digital Video Camcorder

The AD9944KCP is suited to digital video camcorders that require a dedicated CCD signal-processing stage. Its 25 MHz capability supports high-speed CCD transfer and signal processing, while the complete 10-bit and 12-bit functionality provides a compact implementation for camera electronics. Operation from a single 3 V rail supports portable and handheld designs where power budget and board area are limited. The selected CCD’s timing requirements, output levels, and reset characteristics should be checked against the AD9944 data sheet before the circuit is released for production.

🖥️

PC Camera

The AD9944KCP can provide the CCD front-end processing function in a compact PC camera. Integrating the CCD signal processor into a 3 V device helps reduce external circuitry and supports space-constrained USB or embedded imaging modules. The 12-bit processing path and 25 MHz operating capability are useful when the camera design requires a dedicated, deterministic signal chain between the CCD and the downstream controller. Because the device is designed around specific CCD timing and output interfaces, the camera designer must verify the sensor’s requirements, clocking, and recommended external components in the manufacturer documentation.

📱

Portable CCD Imaging Device

The AD9944KCP is a practical choice for portable CCD imaging devices because the AD9943/AD9944 family operates from one 3 V supply and typically dissipates 79 mW. Its integrated 10-bit and 12-bit CCD signal-processing functionality allows a compact module to place conditioning close to the image sensor instead of distributing the analog chain across several boards. That architecture can simplify enclosure design and reduce the number of interconnections in a small imaging product. Thermal, grounding, and high-speed layout still require careful implementation using the manufacturer’s exposed-pad and reference-circuit guidance.

🎥

CCTV Camera

The AD9944KCP supports CCD-based CCTV camera designs by integrating the sensor signal-processing function into a dedicated 3 V device. The 25 MHz capability and complete 10-bit and 12-bit processing provide the core front end for a camera module that sends conditioned image data to a downstream controller. Integrating the function can simplify the analog section and make it easier to standardize the signal path across camera variants. For a deployed surveillance product, validate the CCD timing, clock jitter requirements, power sequencing, and thermal performance against the actual sensor and environmental operating conditions.

🧩

CCD Imaging Module

The AD9944KCP is appropriate for a modular CCD imaging front end that must provide deterministic signal conditioning close to the sensor. Its 32-lead LFCSP package, 3 V operation, and integrated 10-bit and 12-bit processing are useful when the module is intended to interface with a compact downstream image processor. The device can reduce discrete-component count while preserving a defined CCD timing and correction path. The module designer should follow the manufacturer’s PCB land pattern, exposed-pad thermal connection, decoupling, and grounding recommendations to preserve performance at 25 MHz.

What is the AD9944KCP?
The AD9944KCP is a complete 10-bit and 12-bit, 25 MHz CCD signal processor from Analog Devices. It integrates CCD signal-chain processing into a single 3 V device for digital still cameras, digital video camcorders, PC cameras, portable CCD imaging devices, and CCTV cameras. According to the Analog Devices AD9944 product page, the AD9943/AD9944 family typically dissipates 79 mW and is packaged in a 32-lead LFCSP.
What are the key specifications of AD9944KCP that engineers should know?
The AD9944KCP is a 3 V, 25 MHz CCD signal processor with 10-bit and 12-bit operation, a 32-lead LFCSP package, and typical power dissipation of 79 mW. Its primary role is conditioning and processing CCD image-sensor signals in compact imaging systems. The Analog Devices product page identifies digital still cameras, camcorders, PC cameras, portable CCD imaging devices, and CCTV cameras as representative applications.
What is the supply voltage of AD9944KCP?
The AD9944KCP operates from a single 3 V power supply. The Analog Devices AD9944 product page identifies the device as a complete 10-bit and 12-bit, 25 MHz CCD signal processor and states that the AD9943/AD9944 family typically dissipates 79 mW. The datasheet should be used for the complete power-supply, decoupling, and sequencing requirements.
What package does AD9944KCP use?
The AD9944KCP uses a 32-lead LFCSP package with a 5 x 5 mm body and exposed-pad construction. The product information identifies the package as QCC32, MO-220-VHHD-2, and LFCSP-32. The package drawing and land pattern in the manufacturer data sheet must be used for PCB layout because exposed-pad and thermal-pad details are package-specific.
Where can I download the AD9944KCP datasheet PDF?
The AD9944KCP datasheet PDF is available from the official Analog Devices AD9943/AD9944 data-sheet URL: https://www.analog.com/media/en/technical-documentation/data-sheets/AD9943_9944.pdf. It is the appropriate document for the functional description, electrical characteristics, timing, pin information, application circuit, and package drawing. The AD9944 product page at analog.com also provides the family overview and product-selection information.
Where can I find the AD9944KCP pinout?
The AD9944KCP pin assignments are found in the manufacturer AD9943/AD9944 data sheet and package pinout drawing. The device is specified in a 32-lead LFCSP, so the pinout must be interpreted as a 32-pin package with an exposed thermal pad. Use the official package drawing and pin-description table when assigning PCB nets; do not infer pin functions from a generic LFCSP footprint.
Is AD9944KCP suitable for a portable CCD camera?
Yes, the AD9944KCP is suitable for portable CCD imaging devices because it combines CCD signal processing in a single 3 V device and the AD9943/AD9944 family is specified for portable CCD imaging applications. Its typical 79 mW dissipation also fits the low-power design objective of compact camera equipment. Camera designers should still verify the sensor timing, output format, clocking, and power sequencing against the manufacturer data sheet.
What is the AD9944KCP used for in a CCTV camera?
The AD9944KCP can be used as the CCD signal-processing front end in a CCTV camera, where it processes sensor output before the resulting image data is handed to downstream camera electronics. The Analog Devices product page specifically lists CCTV cameras among the AD9944 family applications. The implementation must follow the timing and interface requirements of the selected CCD and the manufacturer’s reference circuit.
Can AD9944KCP be used in a digital still camera?
Yes, digital still cameras are one of the primary applications identified for the AD9944 family. The AD9944KCP provides complete 10-bit and 12-bit CCD signal processing at up to 25 MHz, allowing the camera designer to place the processing function close to the image sensor. This is particularly useful in compact camera modules where component count, voltage, and power constraints are important.
How does AD9944KCP compare with AD9945KCPZ?
The AD9944KCP and AD9945KCPZ are closely related Analog Devices CCD signal-processor devices, but the comparison information identifies distinct product identities and package ordering details. The AD9944KCP is the 12-bit CCD signal processor in the AD9944 family, while AD9945KCPZ belongs to the AD9945 family. For a drop-in substitution, confirm the exact pinout, timing, electrical limits, and exposed-pad land pattern in the relevant data sheets.
What can replace AD9944KCP?
The closest documented alternatives are the AD9944KCPZ and AD9944KCPZRL variants, which are associated with the same AD9944 family and 32-VFQFN/LFCSP class package. The comparison information describes AD9944KCPZRL as having consistent terminals and packages with AD9944KCPZ, but replacement approval still requires checking the exact ordering code, exposed-pad implementation, timing, and electrical characteristics. No independent cross-brand drop-in replacement was established by the available results.
Is AD9944KCP the same as AD9944KCPZ?
AD9944KCP and AD9944KCPZ are orderable forms associated with the AD9944 CCD signal processor, but they should not be treated as automatically interchangeable without reviewing the full ordering information. The available comparison data identifies AD9944KCPZ as a 12-bit LFCSP-32 device and separately identifies AD9944KCPZRL as having consistent terminals and packages with that variant. Confirm reel orientation, temperature grade, package marking, and the exact data-sheet limits before substitution.
What is the best Analog Devices equivalent for AD9944KCP?
The best-supported Analog Devices alternatives are AD9944KCPZ, AD9944KCPZRL, AD9945KCPZ, and AD9945KCPZRL7 because they are the related parts identified by the cross-reference results. Their availability does not by itself prove identical electrical behavior. The correct choice depends on whether the design requires the AD9944 feature set, a particular ordering code, or the AD9945 family’s specifications. Verify the data sheets before treating any of them as a drop-in replacement.
When should I choose AD9944KCP instead of AD9944KCPZ?
Choose AD9944KCP when its exact ordering code, package marking, temperature grade, and supply configuration match the intended design. Choose an AD9944KCPZ ordering option only when the manufacturer ordering table confirms that the selected suffix meets the required temperature range, package form, and production logistics. Because the available results show family-level similarity but not every suffix parameter, the final choice should be based on the current manufacturer data sheet.
How much power does AD9944KCP dissipate?
The AD9943/AD9944 family typically dissipates 79 mW according to the Analog Devices AD9944 product page. The AD9944KCP operates from a single 3 V supply, so the stated typical dissipation is particularly relevant to portable cameras and other compact imaging equipment. Actual device power depends on operating conditions, so use the manufacturer electrical characteristics and thermal information for worst-case design work.

Data referensi kejuruteraan untuk AD9944KCP — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the AD9944KCP when designing a compact CCD imaging front end that needs complete 10-bit and 12-bit processing, operation from a single 3 V supply, and a 25 MHz processing capability. The documented Analog Devices family alternatives can be considered when their exact ordering suffix, temperature grade, production form, and electrical characteristics match the original design. AD9944KCPZ and AD9944KCPZRL are the closest family-related choices, while AD9945KCPZ and AD9945KCPZRL7 may be useful only after their functional and timing requirements are checked. AD9943KCP may suit designs using the related AD9943 feature set, but it should not replace the AD9944 solely because both use the same LFCSP-32 package. No cross-brand drop-in equivalent was established, so a second-source strategy may require board-level validation or a different CCD signal-chain architecture.

Perbandingan dengan Gantian

Parametr Produk Ini AD9944KCPZ AD9944KCPZRL AD9945KCPZ AD9945KCPZRL7 AD9943KCP
Package LFCSP-32, 5 x 5 mm LFCSP-32, 5 x 5 mm LFCSP-32, 5 x 5 mm LFCSP-32, 5 x 5 mm LFCSP-32, 5 x 5 mm LFCSP-32, 5 x 5 mm
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Product Type CCD signal processor CCD signal processor CCD signal processor CCD signal processor CCD signal processor CCD signal processor

Penyeberangsung Jelas

  • Complete CCD processing in one device (vsAD9945KCPZ)
  • Low-power 3 V operation (vsAD9945KCPZRL7)
  • Space-saving 32-lead LFCSP (vsAD9944KCPZ)

Catatan Desain

Use the 32-lead LFCSP package drawing in the manufacturer documentation to create the PCB land pattern, including the exposed thermal pad. Place the device close to the CCD signal source and route the high-speed clock and CCD outputs with short, controlled-impedance traces. The available product information identifies the package as QCC32, MO-220-VHHD-2, so the board footprint must be checked against that package rather than a generic 32-pin QFN library.

Design the supply network for the single 3 V operating rail and follow the manufacturer’s recommended decoupling arrangement. Keep the input capacitor path short and provide a low-impedance return to the device ground and exposed-pad connection. The AD9943/AD9944 family typically dissipates 79 mW, but the power budget should also include switching and interface circuitry that operates from the same rail.

Treat the CCD clock, data, and reset paths as high-speed signals. Use the manufacturer reference circuit for component values, termination, and timing, and avoid adding long traces or test-point stubs adjacent to sensitive nets. The 25 MHz processing capability makes clock distribution and return-path continuity important, particularly when the CCD and controller are located on separate boards.

Connect the exposed pad to a properly designed thermal copper area and follow the package-specific soldering and land-pattern guidance. Although the family typically dissipates 79 mW, thermal performance depends on the PCB copper area, adjacent heat sources, airflow, and the device’s operating condition. Validate the assembled board at the highest expected ambient temperature rather than relying only on the typical power figure.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The available product information identifies the device as an Analog Devices IC and does not provide extractable RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements. Compliance fields therefore remain unknown.

Data disahkan pada: 2026-11-15 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

AD9944KCP datasheet AD9944KCP pinout AD9944KCP datasheet pdf AD9944KCP equivalent AD9944KCP replacement AD9944KCP cross reference AD9944KCP vs AD9944KCPZ AD9944 LFCSP-32 pinout AD9944 3V CCD signal processor AD9944KCP application circuit Analog Devices AD9944KCP AD9944KCP price AD9944KCP stock AD9944KCP footprint AD9944KCP camera IC

Komponen dan Tanda berkaitan

Analog Devices AD9944KCP AD9944KCPZ AD9944KCPZRL AD9945KCPZ AD9945KCPZRL7 AD9943KCP CCD signal processor analog front end sensor and detector interface charge-coupled device CCD digital still camera digital video camcorder PC camera CCTV camera single-ended input 12-bit resolution 10-bit resolution 25 MHz processing 3 V power supply 79 mW power dissipation LFCSP-32 QCC32 exposed pad surface-mount package semiconductor
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ