ADF5610BCCZ - 14.6 GHz Wideband VCO PLL | Analog Devices
料号： ADF5610BCCZ ✓ 量产中ADF5610BCCZ 概述
直接替换替代料： ADF5610BCCZ ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
ADF5611
✅ 直接替换📋 参考替代料（不在目录中）
ADF5612
✅ 直接替换📋 参考替代料（不在目录中）
ADF5613
✅ 直接替换📋 参考替代料（不在目录中）
ADF5610BCCZ-RL7
✅ 直接替换📋 参考替代料（不在目录中）
ADF5610BCCZ 规格参数
| Device Type | Integer-N/Fractional-N PLL frequency synthesizer with integrated VCO |
| Maximum RF Output Frequency | 14.6 GHz |
| Integrated VCO Fundamental Frequency Range | 3650 MHz to 7300 MHz |
| Differential Output Divide Ratios | 1, 2, 4, 8, 16, 32, 64, 128 |
| Minimum RF Output Frequency | 57 MHz |
| Serial Interface | 3-wire SPI |
| 封装 | 48-VFLGA with exposed pad |
| Package Code | HLGA |
| Terminal Count | 48 |
| Package Shape | Square |
| 安装类型 | Surface mount |
| Temperature Grade | Industrial |
| Reference Requirement | External reference source |
| Loop Filter Requirement | External loop filter |
| 输出配置 | Single-ended RFOUT and differential divided output |
| Supported Synthesis Modes | Integer-N and fractional-N |
| Programming Support | SDP-S software programming through USB interface |
ADF5610BCCZ square 引脚配置指南
ADF5610BCCZ（square 封装）的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据： ADF5610BCCZ.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ADF5610BCCZ 适用于 6 应用s: Wideband Microwave Signal Generators, Communications Test Equipment, Radar and Microwave Down-Converter Systems, RF Module Development and Evaluation, Instrumentation and Measurement Front Ends, Frequency-Synthesis Research and Calibration.
Wideband Microwave Signal Generators
The ADF5610BCCZ fits wideband microwave signal-generator designs because it combines a 3650 MHz to 7300 MHz integrated-VCO fundamental range with a listed maximum RF frequency of 14.6 GHz. The doubled VCO output is available at RFOUT, while selectable divide ratios from 1 to 128 support outputs down to 57 MHz through the differential path. Designers can use the 3-wire SPI interface to configure the synthesizer, with an external reference and loop filter providing the reference and feedback functions. The main design consideration is preserving the high-frequency layout specified by Analog Devices while providing the exposed-pad thermal connection.
推荐
Communications Test Equipment
The ADF5610BCCZ is appropriate for communications test equipment requiring programmable RF output across microwave and lower RF frequencies. Its maximum listed output of 14.6 GHz and divided-output range beginning at 57 MHz allow a single synthesizer architecture to cover many instrument bands. Integer-N and fractional-N modes provide flexibility for selecting a reference and loop-filter strategy suited to the required channel spacing. The 48-VFLGA exposed-pad package requires careful grounding, decoupling, and thermal layout, while the SPI programming interface simplifies integration with a test-equipment controller.
推荐
Radar and Microwave Down-Converter Systems
The ADF5610BCCZ can support local-oscillator or signal-generation functions in microwave radar and down-converter systems where wide tuning coverage and programmable frequency control are important. The integrated VCO reduces external oscillator assembly, and the divided differential output provides lower-frequency options for subsystem testing. Designers should select the loop filter and reference based on the required phase-noise performance and lock behavior, because those values are not fully available in the supplied web data. PCB implementation must minimize RF trace discontinuities and maintain the package ground and exposed-pad connection specified by the manufacturer.
推荐
RF Module Development and Evaluation
The ADF5610BCCZ is useful in RF module development because the integrated VCO, configurable divide ratios, and serial programming interface simplify controlled prototype evaluation. Its output can be directed through the RFOUT path or the divided differential path, allowing engineers to assess multiple frequency plans during bring-up. The SDP-S reference in the Analog Devices product page indicates that software programming through a USB interface is supported with the appropriate evaluation equipment. The main trade-off is package complexity: the 48-VFLGA exposed-pad footprint requires high-quality RF layout and careful component placement around the device.
推荐
Instrumentation and Measurement Front Ends
The ADF5610BCCZ supports instrumentation front ends that require an integrated wideband microwave synthesizer and flexible output division. With a 14.6 GHz maximum listed frequency, it can address many RF test points, while the 57 MHz minimum divided output broadens its use in lower-frequency instrumentation. The external loop filter remains an important design element because it influences loop dynamics and phase noise, so it should be calculated for the selected reference and target output. A controlled reference, low-noise supply arrangement, and short RF paths help preserve measurement performance.
推荐
Frequency-Synthesis Research and Calibration
The ADF5610BCCZ is well suited to laboratory frequency-synthesis research because it supports integer-N and fractional-N operation and exposes programmable divide ratios from 1 through 128. These features allow engineers to study reference choices, loop-filter behavior, channel spacing, and output-path selection without building a separate VCO. The 48-VFLGA exposed-pad package also makes thermal and high-frequency layout considerations part of the evaluation. Before using it in a calibrated instrument, verify phase noise, tuning accuracy, reference sensitivity, and temperature stability against the complete manufacturer datasheet, since those details were not included in the supplied snippets.
推荐
推荐产品汇总
工程参考数据： ADF5610BCCZ ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ADF5611 | ADF5612 | ADF5613 | ADF5610BCCZ-RL7 |
|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
关键差异点
- Wide maximum RF tuning coverage （对比 ADF5611)
- Broad divided-output flexibility （对比 ADF5612)
- Integrated wideband VCO and programming interface （对比 ADF5613)
设计说明
Follow the Analog Devices recommended land pattern and high-frequency layout for the 48-VFLGA exposed-pad package. Provide a solid, low-impedance ground connection beneath the device, place supply decoupling close to the relevant pins, and keep the reference and RF output routing short and controlled. Because the verified data does not include the complete pin map or package drawing, the official datasheet must be used for exact pad assignments, exposed-pad geometry, and assembly requirements.
Treat the reference input, loop-filter connection, RFOUT path, and divided differential output as sensitive RF nodes. Use a short, continuous reference path and place the external loop-filter components according to the datasheet layout guidance. Keep switching or digital return currents away from the VCO and feedback routing, and use controlled impedance for RF traces. Validate the final board for unwanted spurs, output-power variation, and lock behavior rather than relying only on schematic connectivity.
The 48-VFLGA package includes an exposed pad that should be connected to the PCB ground and thermal copper area as directed by Analog Devices. Estimated thermal performance cannot be calculated from the supplied data because junction-to-ambient resistance, supply voltage, and dissipation conditions were not provided. For higher output-power or elevated-temperature operation, confirm the manufacturer thermal information and provide adequate copper without compromising RF return paths.
合规信息
The supplied verified data identifies the device as an industrial-grade surface-mount component but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is marked not_applicable because the component is a clock and timing IC rather than an automotive-qualified device in the provided evidence.
