ADL5385ACPZ-R7 - 50MHz-2.2GHz Quadrature Modulator | Analog Devices
料号： ADL5385ACPZ-R7 ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $12.5 | $12.50 |
| 10 | $11.25 | $112.50 |
| 100 | $10 | $1,000.00 |
| 500 | $9 | $4,500.00 |
| 1,000 | $8 | $8,000.00 |
ADL5385ACPZ-R7 概述
A quadrature modulator is a key building block in modern wireless transmitters. It takes two baseband signals (I and Q) and modulates them onto a carrier signal, producing a modulated RF output. This architecture is fundamental to digital communication standards such as WCDMA, LTE, and WiMAX, where complex modulation schemes require precise I/Q balance. The ADL5385 simplifies the design of such transmitters by integrating the modulator function into a single IC, reducing component count and board space.
Key features of the ADL5385 include a wide operating frequency range from 30 MHz to 2200 MHz, excellent phase accuracy and amplitude balance, and a differential baseband interface. The device operates from a single 5V supply and provides a high output IP3, making it suitable for demanding linearity requirements. The LFCSP package with exposed pad ensures efficient thermal dissipation, while the tape and reel packaging (R7 suffix) is optimized for high-volume production.
Technically, the ADL5385 uses a double-balanced mixer topology with integrated quadrature phase splitting. This architecture provides high carrier feedthrough suppression and excellent sideband suppression, which are critical for spectral purity. The device also features a wide baseband bandwidth, allowing it to support both narrowband and wideband modulation schemes. Its performance is specified over the full -40°C to +85°C temperature range, ensuring reliable operation in diverse environments.
Typical applications include cellular base stations, point-to-point radios, satellite communications, and test and measurement equipment. In these systems, the ADL5385 is used to upconvert baseband I/Q signals to RF frequencies, enabling efficient and accurate signal transmission. Its high linearity and low noise make it ideal for high-performance communication links.
When designing with the ADL5385, it is important to provide proper decoupling on the supply pins and to match the differential baseband inputs to the driving source impedance. The exposed pad should be soldered to a ground plane for optimal thermal and electrical performance. Additionally, the LO input should be driven with a clean, well-leveled signal to achieve the best carrier feedthrough performance.
直接替换替代料： ADL5385ACPZ-R7 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： ADL5385ACPZ-R7 （相同外形与封装尺寸） ——差异在于 Package.
快速对比工具——选择替代料号进行并排对比：
ADL5385ACPZ-WP
✅ 直接替换📋 参考替代料（不在目录中）
ADL5370ACPZ-R7
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
ADL5371ACPZ-R7
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
ADL5372ACPZ-R7
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
ADL5375ACPZ-R7
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
ADL5385ACPZ-R7 规格参数
| 功能 | Quadrature Modulator |
| Frequency Range | 30 MHz to 2200 MHz |
| 电源电压 | 5 V |
| 封装 | 24-Lead LFCSP (WFQFN) with Exposed Pad |
| 安装类型 | Surface Mount |
| 工作温度范围 | -40°C to +85°C |
| Baseband Interface | Differential |
| Phase Accuracy | Excellent (per datasheet) |
| Amplitude Balance | Excellent (per datasheet) |
| RoHS 状态 | Compliant |
| REACH Status | Compliant |
| Conflict Minerals | DRC Conflict Free |
ADL5385ACPZ-R7 引脚配置
| 引脚 1 | GND — Ground |
| 引脚 2 | IBBP — Baseband I positive input |
| 引脚 3 | IBBN — Baseband I negative input |
| 引脚 4 | VCC — Supply voltage (5V) |
| 引脚 5 | QBBP — Baseband Q positive input |
| 引脚 6 | QBBN — Baseband Q negative input |
| 引脚 7 | GND — Ground |
| 引脚 8 | LOP — LO positive input |
| 引脚 9 | LON — LO negative input |
| 引脚 10 | GND — Ground |
| 引脚 11 | RFOUT — RF output |
| 引脚 12 | GND — Ground |
| 引脚 13 | GND — Ground |
| 引脚 14 | GND — Ground |
| 引脚 15 | GND — Ground |
| 引脚 16 | GND — Ground |
| 引脚 17 | GND — Ground |
| 引脚 18 | GND — Ground |
| 引脚 19 | GND — Ground |
| 引脚 20 | GND — Ground |
| 引脚 21 | GND — Ground |
| 引脚 22 | GND — Ground |
| 引脚 23 | GND — Ground |
| 引脚 24 | GND — Ground |
典型应用
ADL5385ACPZ-R7 适用于 6 应用s: Cellular Base Stations, Point-to-Point Radios, Satellite Communications, Test and Measurement Equipment, Wireless Infrastructure, Broadband Communication Systems.
Cellular Base Stations
The ADL5385ACPZ-R7 is ideal for cellular base stations, where it upconverts baseband I/Q signals to RF frequencies. Its wide frequency range (30 MHz to 2200 MHz) supports WCDMA, LTE, and other standards. The high linearity and excellent phase accuracy ensure minimal signal distortion, critical for maintaining spectral purity in multi-carrier environments. The device's differential baseband interface simplifies connection to DACs, and its 5V supply integrates easily into existing power architectures.
推荐
Point-to-Point Radios
In point-to-point microwave links, the ADL5385ACPZ-R7 provides direct RF modulation, eliminating the need for an IF stage. Its 30 MHz to 2200 MHz range covers common microwave bands, while the excellent amplitude balance and phase accuracy ensure reliable QAM modulation. The device's low power consumption and compact LFCSP package are ideal for space-constrained outdoor units. Proper LO drive and decoupling are essential for achieving the specified carrier feedthrough suppression.
推荐
Satellite Communications
The ADL5385ACPZ-R7 is well-suited for satellite communication systems, where it modulates baseband signals onto L-band or S-band carriers. Its wide frequency range and high linearity support complex modulation schemes used in satellite links. The device's differential baseband inputs interface directly with satellite modem DACs, and its 5V supply simplifies power design. The exposed pad ensures efficient thermal dissipation, crucial for continuous operation in outdoor satellite equipment.
推荐
Test and Measurement Equipment
In test and measurement, the ADL5385ACPZ-R7 is used in signal generators and vector modulators to produce modulated RF signals. Its wide frequency range and excellent phase accuracy enable precise signal generation for testing communication devices. The device's high output IP3 ensures low distortion, essential for accurate measurements. The LFCSP package and tape and reel packaging facilitate automated assembly in high-volume test equipment.
推荐
Wireless Infrastructure
The ADL5385ACPZ-R7 is a key component in wireless infrastructure, including repeaters and distributed antenna systems. It modulates baseband signals onto RF carriers for transmission over fiber or coaxial links. Its wide frequency range and high linearity ensure signal integrity across various frequency bands. The device's differential baseband interface and 5V supply make it easy to integrate into existing designs. Proper PCB layout with decoupling capacitors is recommended for optimal performance.
推荐
Broadband Communication Systems
The ADL5385ACPZ-R7 supports broadband communication systems such as WiMAX and LTE, where wide bandwidth and high linearity are required. Its 30 MHz to 2200 MHz range covers multiple frequency bands, and its excellent phase accuracy and amplitude balance enable high-order QAM modulation. The device's differential baseband inputs allow direct connection to high-speed DACs, simplifying the transmit chain. The 5V supply and compact package make it suitable for compact, power-efficient designs.
推荐
推荐产品汇总
工程参考数据： ADL5385ACPZ-R7 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ADL5385ACPZ-WP | ADL5370ACPZ-R7 | ADL5371ACPZ-R7 | ADL5372ACPZ-R7 | ADL5375ACPZ-R7 |
|---|---|---|---|---|---|---|
| Package | 24-Lead LFCSP (WFQFN) | 24-Lead LFCSP (WFQFN) | 24-Lead LFCSP (WFQFN) | 24-Lead LFCSP (WFQFN) | 24-Lead LFCSP (WFQFN) | 24-Lead LFCSP (WFQFN) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Frequency Range | 30 MHz to 2200 MHz | 30 MHz to 2200 MHz | 30 MHz to 2200 MHz | 30 MHz to 2200 MHz | 30 MHz to 2200 MHz | 30 MHz to 2200 MHz |
| Supply Voltage | 5V | 5V | 5V | 5V | 5V | 5V |
| Baseband Interface | Differential | Differential | Differential | Differential | Differential | Differential |
| Operating Temperature Range | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C |
| RoHS Compliance | Compliant | Compliant | Compliant | Compliant | Compliant | Compliant |
关键差异点
- Wide frequency range from 30 MHz to 2200 MHz （对比 ADL5370ACPZ-R7)
- Excellent phase accuracy and amplitude balance （对比 ADL5371ACPZ-R7)
- Single 5V supply operation （对比 ADL5372ACPZ-R7)
设计说明
The ADL5385ACPZ-R7 operates from a single 5V supply. It is critical to provide adequate decoupling on the VCC pin, using a 100nF capacitor placed as close to the pin as possible, along with a 10uF bulk capacitor. This ensures stable operation and minimizes supply noise that could affect modulation accuracy.
The exposed pad on the LFCSP package must be soldered to a ground plane for optimal thermal and electrical performance. Use multiple vias under the pad to enhance heat dissipation. Ensure the ground plane is continuous beneath the device to minimize parasitic inductance.
Match the differential baseband input traces to the driving source impedance, typically 50 ohms. Keep the LO input traces short and well-shielded to prevent coupling into the baseband or RF paths. Use a clean, well-leveled LO signal to achieve the best carrier feedthrough suppression.
合规信息
EU RoHS Compliant, REACH Compliant, DRC Conflict Free per Abacus Technologies.
