Analog Devices

ADM3483ARZ - 3.3V 250kbps RS-485 Transceiver | Analog Devices

料号: ADM3483ARZ ✓ 量产中
3.0 V to 3.6 V Vdss 2 nA Id EIA RS-485 and TIA/EIA RS-422 Rds(on) 8-pin SOIC Package
最小起订量: 1 |

ADM3483ARZ 概述

The Analog Devices ADM3483ARZ is a 3.3 V, low-power, half-duplex RS-485/RS-422 transceiver rated for data rates up to 250 kbps and housed in an 8-pin SOIC package. It combines one differential driver and one differential receiver with separate driver-enable and receiver-enable control, making it suitable for multipoint industrial communication networks. Its slew-rate-limited outputs reduce electromagnetic interference, while shutdown operation supports systems that need a low-power state.

An RS-485 transceiver is an interface IC that converts logic-level signals into balanced differential signals for reliable communication over longer cables and noisy environments. The RS-485/RS-422 transceiver category belongs to the broader interface-IC hierarchy and enables multiple nodes to share a two-wire bus while improving noise immunity, grounding flexibility, and common-mode tolerance compared with single-ended signaling.

The ADM3483ARZ operates from a single 3.3 V supply and supports the standard low-power 3.3 V operating range of 3.0 V to 3.6 V. Key features include a maximum data rate of 250 kbps, reduced slew rates for low EMI, and support for as many as 32 transceivers on one bus. The device also tolerates bus voltages up to +12 V according to the product description.

The half-duplex architecture allows the same differential pair to carry transmitted or received data, but only one direction can be active at a time. Driver-enable and receiver-enable inputs provide local control of bus direction and receiver state. This arrangement reduces external interface logic when a connected microcontroller or host controller needs to switch between driving a command and listening for a response.

Typical applications include industrial automation controllers, building-automation equipment, remote sensor interfaces, instrumentation links, and low-power embedded communications modules. A 250 kbps rate is appropriate for moderate-speed control and monitoring rather than high-bandwidth factory protocols. The device is particularly useful where low EMI, a 3.3 V supply, and multipoint bus capability matter more than maximum line rate.

Design the bus with a symmetric differential trace geometry, controlled impedance, proper termination, and a common-mode strategy appropriate to the installation. Keep transceiver and connector ground references consistent, and account for cable delay when determining whether the selected data rate is safe for the total bus length.

This page combines manufacturer specifications, drop-in replacement information, interface-design guidance, and application-focused comparisons to support component selection and PCB implementation beyond the basic ordering information.

直接替换替代料: ADM3483ARZ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

ADM3483EARZ

✅ 直接替换
📦 8-pin SOIC
Same 3.3 V supply, 250 kbps rate, half-duplex function, and pinout; adds enhanced ESD protection

📋 参考替代料(不在目录中)

SP3483CN-L

✅ 直接替换
📦 8-pin SOIC
Same 3.3 V RS-485 class and 250 kbps rate; enable polarity and secondary electrical limits require design verification

📋 参考替代料(不在目录中)

ADM3483ARZ 规格参数

Product Type Half-duplex RS-485/RS-422 transceiver
Supply Voltage Range 3.0 V to 3.6 V
Nominal Supply Voltage 3.3 V
Maximum Data Rate 250 kbps
Driver and Receiver Count 1 transmitter and 1 receiver
Duplex Mode Half-duplex
Supported Standards EIA RS-485 and TIA/EIA RS-422
Output Slew Rate Reduced, slew-rate limited
Maximum Bus Nodes 32 transceivers per bus
Maximum Bus Voltage +12 V
Shutdown Supply Current 2 nA
Enable Controls Separate DE and RE inputs
工作温度范围 -40°C to +85°C
封装 8-pin SOIC
安装类型 Surface mount

ADM3483ARZ 8-pin soic 引脚配置指南

ADM3483ARZ(8-pin soic 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

ADM3483ARZ 的 8-pin soic 封装引脚图

暂无详细引脚数据: ADM3483ARZ.

请参阅 数据手册 以查看完整引脚配置。

典型应用

ADM3483ARZ 适用于 6 应用s: Industrial Sensor Networks, Building Automation Controllers, Instrumentation Data Links, Remote Sensor Interfaces, Embedded Communication Modules, Process Control Interfaces.

🏭

Industrial Sensor Networks

The ADM3483ARZ fits industrial sensor networks that distribute measurements over a shared 3.3 V RS-485 bus. Its 250 kbps maximum rate supports moderate-speed environmental monitoring, pressure sensing, and equipment-status reporting, while the reduced-slew-rate outputs help control electromagnetic interference. The half-duplex architecture lets one eight-pin device provide both transmission and reception, and support for up to 32 bus nodes supports distributed installations. Engineers should match the data rate to total cable length and node count, then verify termination and common-mode behavior for the industrial environment.

🏭

Building Automation Controllers

The ADM3483ARZ is suitable for building-automation controller boards that communicate with distributed lighting, HVAC, access, and occupancy modules. Its single 3.0 V to 3.6 V supply operation simplifies connection to 3.3 V embedded controllers, while DE and RE inputs permit controlled bus-direction switching. The 250 kbps limit suits supervisory command and status traffic rather than high-bandwidth building data. Low-EMI slew-rate behavior also helps reduce coupling into adjacent control and sensor circuits, although cable routing and grounding remain critical in multi-floor installations.

🔧

Instrumentation Data Links

The ADM3483ARZ can connect laboratory or process-instrumentation equipment over a balanced RS-485 or RS-422 link. Its differential signaling improves noise immunity compared with single-ended interfaces, and the 3.3 V supply allows operation alongside modern control electronics. The 250 kbps data rate accommodates measurement commands, configuration data, and periodic readings without imposing the power and EMI burden of a much faster transceiver. For reliable commissioning, verify input and output logic levels, enable timing, protection networks, and termination against the final cable and instrument configuration.

🧩

Remote Sensor Interfaces

The ADM3483ARZ is appropriate for remote sensing modules connected through a 3.3 V RS-485 field bus. One half-duplex transceiver supports command transmission and sensor-response reception while limiting board area, and the 250 kbps rate is more than sufficient for periodic environmental and equipment readings. Its shutdown capability can also support systems that conserve power between activity periods. The installation must still account for bus-node count, cable attenuation, grounding, and surge exposure, particularly when sensors are connected by long outdoor cables.

🌐

Embedded Communication Modules

The ADM3483ARZ supports compact embedded communication modules that expose a 3.3 V serial host interface to an RS-485 field network. Half-duplex operation reduces the number of signal paths, while separate DE and RE control lets firmware manage transmission and reception states. The transceiver's 250 kbps rate suits configuration and telemetry traffic and its reduced slew rate limits high-frequency edge energy. Firmware should account for driver enable, receiver enable, turnaround delay, bus-idle behavior, and any requirement to detect a disconnected or reversed bus.

🏭

Process Control Interfaces

The ADM3483ARZ is useful in process-control interface cards that distribute commands and collect equipment status over a reliable balanced bus. Its RS-485 and RS-422 compatibility, 3.3 V supply, and 250 kbps rate align with supervisory control tasks such as actuator commands and diagnostic reporting. The 32-node capability permits multiple field devices to share a line, while the half-duplex topology reduces wiring. Designers should verify the bus remains within the device electrical limits at maximum cable length and should apply appropriate surge, ESD, grounding, and shielding measures at exposed connectors.

What are the key specifications of ADM3483ARZ that engineers should know?
The ADM3483ARZ is a 3.3 V, half-duplex RS-485/RS-422 transceiver with a maximum data rate of 250 kbps in an 8-pin SOIC package. According to the Analog Devices ADM3483 product page, it provides one transmitter, one receiver, separate DE/RE control, reduced slew rates for low EMI, shutdown current of 2 nA, support for 32 bus nodes, and operation from 3.0 V to 3.6 V.
What is the operating voltage of ADM3483ARZ?
The ADM3483ARZ operates from 3.0 V to 3.6 V with a nominal supply voltage of 3.3 V. The Analog Devices product information identifies the ADM3483 as a single-supply, low-power transceiver. This voltage range is suitable for 3.3 V embedded systems and allows the transceiver to share its supply with compatible digital controllers without requiring a separate 5 V interface rail.
How fast is the ADM3483ARZ RS-485 transceiver?
The ADM3483ARZ supports a maximum signaling rate of 250 kbps. According to the Analog Devices ADM3483 product page, it is a half-duplex RS-485/RS-422 device with slew-rate-limited outputs. The 250 kbps rate is appropriate for industrial control, sensor monitoring, and building-automation links, although cable length, node count, and transceiver propagation delay must also be considered when selecting the operating rate.
Where can I download the ADM3483ARZ datasheet PDF?
The official ADM3483 datasheet and product information are available from the Analog Devices product page at https://www.analog.com/en/products/adm3483.html. Use the manufacturer datasheet for the complete electrical characteristics, truth tables, timing diagrams, pin descriptions, and application circuit. The product page also links to ordering information and related ADM3483 variants for design review.
Where can I find the ADM3483ARZ pinout?
The ADM3483ARZ pin assignment is documented in the pin-description table of the Analog Devices ADM3483 manufacturer datasheet. The device uses an 8-pin SOIC package, so verify all eight terminal names, including supply, ground, driver-enable, receiver-enable, driver inputs and outputs, and receiver inputs and outputs, against that table before assigning PCB tracks.
What is the difference between ADM3483ARZ and ADM3483EARZ?
The ADM3483EARZ is the enhanced-ESD version of the ADM3483 family and remains pin compatible with the ADM3483ARZ in the 8-pin SOIC footprint. The comparison information identifies identical supply voltage, data rate, duplex mode, and pinout, while the ADM3483EARZ adds enhanced ESD protection. Choose the EARZ version when additional connector-side surge robustness justifies the functional upgrade.
Can SP3483CN-L replace ADM3483ARZ?
The SP3483CN-L can be considered a cross-brand replacement candidate for the ADM3483ARZ because both are low-power 3.3 V RS-485 transceivers associated with the 250 kbps class and 8-pin SOIC implementation. Final substitution still requires checking every pin function, enable polarity, receiver fail-safe behavior, ESD rating, and timing parameter against the original design.
When should I choose ADM3483ARZ over a full-duplex transceiver?
Choose the ADM3483ARZ when a two-wire half-duplex bus is acceptable and the system must limit each node to one transceiver package. Its 250 kbps maximum data rate, 3.3 V operation, and reduced slew rate suit moderate-speed multipoint links. A full-duplex transceiver is preferable when transmit and receive paths must operate simultaneously without direction control.
What can replace ADM3483ARZ?
The ADM3483EARZ is the closest same-manufacturer replacement because it retains the 3.3 V supply, 250 kbps data rate, half-duplex RS-485/RS-422 function, and 8-pin SOIC footprint while adding enhanced ESD protection. The SP3483CN-L is a cross-brand candidate for circuits that pass the full electrical and timing review. Confirm pin names and enable polarity before either replacement is released to production.
Is ADM3483ARZ suitable for industrial sensor networks?
The ADM3483ARZ is suitable for industrial sensor networks operating at moderate communication rates. It supports 3.3 V logic, RS-485 and RS-422 signaling, reduced-slew-rate outputs for lower EMI, and up to 32 transceivers per bus. Industrial suitability should still be assessed against the required temperature range, surge and ESD exposure, cable length, grounding, and isolation requirements.
Where can I buy ADM3483ARZ online?
Use the Request a Quote form on this page to request ADM3483ARZ availability, current commercial terms, and the required delivery quantity. The form is the appropriate channel for a quote-first electronic component purchase and can capture the exact package, tube, or reel requirement needed for your production build.
What is the price of ADM3483ARZ?
Use the Request a Quote form on this page to request the current ADM3483ARZ price for your specified quantity and packaging. The structured pricing interface reflects current commercial data when a qualifying quote can be generated, while the request form allows procurement to confirm quantity breaks, delivery terms, and exact orderable configuration.
What is the lead time for ADM3483ARZ?
Request the current ADM3483ARZ lead time through the Request a Quote form on this page. Lead time can depend on order quantity, package configuration, and current manufacturing allocation, so procurement should state the required tube or reel format, annual usage, and requested delivery date when requesting a quotation.
Is ADM3483ARZ in stock?
Use the Request a Quote form on this page to check current ADM3483ARZ stock and allocation for your required quantity. The form lets procurement request an availability confirmation against the exact package and delivery schedule rather than relying on a generic catalog-status indication.
How should an ADM3483ARZ RS-485 bus be laid out?
Route the ADM3483ARZ differential pair as a controlled-impedance, symmetrical pair with continuous ground reference, and place termination components only where the cable topology requires them. Keep the transceiver close to the connector and controller interface, provide a solid ground plane, and avoid routing the differential pair across split-plane boundaries. The manufacturer application guidance should be used for final protection-network and termination choices.

工程参考数据: ADM3483ARZ ——对比、设计指导和合规信息。

选型指南

Choose the ADM3483ARZ when designing a 3.3 V, half-duplex RS-485 or RS-422 link that must operate at up to 250 kbps, limit EMI with slew-rate control, and support as many as 32 nodes on one bus. Select the ADM3483EARZ when the board can benefit from enhanced ESD protection; its 3.3 V supply, 250 kbps rate, half-duplex operation, and 8-pin SOIC footprint make it the closest same-family choice. Consider the SP3483CN-L only after checking every pin function, enable polarity, threshold, timing, protection specification, and fail-safe behavior against the original design. Neither alternative should be treated as automatically interchangeable simply because it uses an 8-pin SOIC package. For new designs, also verify the required data rate, cable length, node count, connector-side surge requirements, and whether shutdown or full-duplex operation is needed.

与替代料对比

参数 本产品 ADM3483EARZ SP3483CN-L
Brand Analog Devices Analog Devices Exar
Package 8-pin SOIC 8-pin SOIC - same package 8-pin SOIC - same package
Product Type Half-duplex RS-485/RS-422 transceiver Half-duplex RS-485/RS-422 transceiver Low-power RS-485 transceiver
Supply Voltage 3.0 V to 3.6 V 3.0 V to 3.6 V 3.3 V
Maximum Data Rate 250 kbps 250 kbps 250 kbps
Duplex Mode Half-duplex Half-duplex Half-duplex

关键差异点

  • Closest same-family replacement adds enhanced ESD protection without changing the core interface function (对比 ADM3483EARZ)
  • Same 3.3 V low-power RS-485 positioning as the original (对比 SP3483CN-L)
  • Supports a substantial multipoint bus while retaining reduced EMI behavior (对比 SP3483CN-L)

设计说明

Route the differential pair as a short, symmetric, continuously referenced trace with a solid ground plane beneath it. Place the transceiver close to the connector so transient current from the cable returns through the protection network rather than across sensitive controller traces. Avoid stubs, vias in the paired route where practical, and splits in the ground plane. Apply the protection components specified by the manufacturer datasheet at the connector boundary.

Do not assume that a shared RS-485 package automatically supports every full-duplex or shutdown-capable substitute. Verify DE and RE polarity, receiver enable behavior, driver disable characteristics, input thresholds, fail-safe response, maximum data rate, and shutdown current. The ADM3483EARZ is the closest same-family choice; SP3483CN-L requires an engineering review of its complete electrical table before production substitution.

Match the cable, transceiver, and termination strategy to the selected 250 kbps rate. Use a termination resistor only at the physical ends of the bus, account for the cable propagation delay when calculating the maximum practical rate, and provide a defined idle state for the driver. Slew-rate control reduces high-frequency energy but does not remove the need for proper grounding, shielding, or surge protection.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was identified for the target MPN. AEC-Q100 qualification was not identified for this industrial interface IC.

相关搜索

adm3483arz datasheet adm3483arz reel7 ADM3483ARZ datasheet pdf ADM3483ARZ pinout ADM3483ARZ RS-485 transceiver ADM3483ARZ 3.3V 250kbps ADM3483ARZ equivalent ADM3483ARZ replacement ADM3483ARZ vs ADM3483EARZ ADM3483ARZ vs SP3483CN-L ADM3483ARZ price ADM3483ARZ stock Analog Devices ADM3483ARZ ADM3483ARZ application circuit

相关元器件 & 术语

Analog Devices ADM3483ARZ ADM3483EARZ SP3483CN-L RS-485 RS-422 TIA/EIA RS-422 half-duplex transceiver differential line transceiver interface IC semiconductor 3.3 V transceiver 250 kbps data rate slew-rate-limited output driver enable receiver enable shutdown mode 8-pin SOIC SOIC package family surface-mount package industrial automation building automation remote sensor network instrumentation process control
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情