ADUCM410BBCZ - 160MHz Cortex-M33 Precision Analog MCU | ADI
料号： ADUCM410BBCZ ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $18.5 | $18.50 |
| 10 | $16.85 | $168.50 |
| 100 | $14.92 | $1,492.00 |
| 500 | $13.45 | $6,725.00 |
| 1,000 | $12.1 | $12,100.00 |
ADUCM410BBCZ 概述
A microcontroller (MCU) is an integrated system-on-chip that combines a processor core, program and data memory, and a configurable set of digital and analog peripherals. Precision analog microcontrollers extend this concept by co-integrating high-resolution data converters and analog signal conditioning, allowing the MCU to directly interface with sensors, transducers, and analog front-end signals without external ADC ICs. The ADuCM410 sits at the top of Analog Devices' ADuCM micro-controller family and belongs to the broader category of mixed-signal embedded processors and controllers.
Key features include a 16-bit sigma-delta style ADC architecture with 2 MSPS throughput, 16 analog input channels, an integrated MDIO interface for optical network communications, multiple serial interfaces (SPI, I2C, UART), timers, GPIO, and hardware cryptographic acceleration. The die temperature sensor and on-chip supply monitors support robust system health diagnostics, while the ARM Cortex-M33 core offers DSP extensions and TrustZone security for industrial-grade applications.
Typical applications include optical transceiver modules (QSFP28, SFP28, SFP+) where the MDIO interface and integrated ADC enable laser bias control and received-signal-strength monitoring, industrial process control loop sensors with 4-20 mA current loops, battery management systems in industrial energy storage, precision multi-channel data acquisition systems, and smart sensor hubs that aggregate thermocouple, RTD, and 4-20 mA signals at industrial network nodes.
When designing with the ADuCM410BBCZ, ensure the CSPBGA land pattern uses microvia-in-pad PCB construction and that supply rails meet the 2.5V/3.3V tolerance specified by Analog Devices for the analog and digital domains. Decouple AVDD and DVDD separately, and follow the datasheet reference layout for the exposed-pad thermal pad to keep junction temperature within the -40C to +125C operating range. Use the TrustZone-aware linker to isolate secure boot and key storage regions if cryptographic functions are enabled.
This page synthesizes distributor pricing, drop-in alternatives within the ADuCM410 family, and practical design notes not found in the manufacturer datasheet, giving embedded engineers an actionable reference for optical module and precision sensor designs.
直接替换替代料： ADUCM410BBCZ ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
快速对比工具——选择替代料号进行并排对比：
ADUCM410BBCZ-RL
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
ADUCM411BBCZ
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
ADUCM410WBSWZ
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
ADUCM410BBCZ-ENG
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
ADUCM410BBCZ 最大额定值与电气特性
| Core Architecture | Arm Cortex-M33 with FPU and DSP extensions |
| Core Frequency | 160 MHz |
| 数据总线宽度 | 32-bit |
| Program Memory | 1 MB Flash |
| SRAM | 256 kB |
| ADC Resolution | 16-bit |
| ADC Sampling Rate | 2 MSPS |
| Analog Input Channels | Up to 16 (single-ended or differential) |
| On-Chip Analog | PGA, TIA, die temperature sensor |
| Communication Interfaces | MDIO, SPI, I2C, UART |
| Security | TrustZone, secure boot |
| 封装 | 81-CSPBGA (5x5 mm) |
| 安装类型 | Surface Mount |
| 工作温度 | -40C to +125C |
| RoHS 状态 | Compliant |
ADUCM410BBCZ 81-cspbga (5x5 mm) 引脚配置指南
ADUCM410BBCZ（81-cspbga (5x5 mm) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： ADUCM410BBCZ.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ADUCM410BBCZ 适用于 6 应用s: Optical Transceiver Module Controller, Industrial Process Control Sensor Hub, Precision Multi-Channel Data Acquisition, Smart Battery Management System, Medical Patient Monitoring Sensor Interface, Building Automation Multi-Sensor Node.
Optical Transceiver Module Controller
The ADUCM410BBCZ is purpose-built for QSFP28, SFP28, and SFP+ optical modules where the integrated MDIO peripheral, 16-bit 2 MSPS ADC, and PGA/TIA enable closed-loop laser bias control. Its 160 MHz Cortex-M33 core runs CDR algorithms and DOMEDSIES monitoring in parallel, while 256 kB of SRAM absorbs burst-mode packet buffers. The 81-CSPBGA 5x5 mm footprint fits inside standard QSFP module host boards without compromising RF trace integrity, and the on-chip temperature sensor monitors laser diode junction temperature for MSA-compliant warning flags.
推荐
Industrial Process Control Sensor Hub
The ADUCM410BBCZ serves as a multi-channel 4-20 mA and 0-10V sensor hub in process plants, aggregating thermocouple, RTD, and analog sensor signals with 16-bit resolution at 2 MSPS. The Cortex-M33 core runs PID loops in real time and TrustZone isolates secure boot from application firmware, while 1 MB Flash stores calibration coefficients and protocol stacks (HART, IO-Link). Compared to discrete ADC plus microcontroller solutions, the ADuCM410 reduces BOM cost by approximately 30 percent while improving noise performance through matched on-chip signal conditioning.
推荐
Precision Multi-Channel Data Acquisition
The ADUCM410BBCZ enables 16-channel precision DAQ systems with simultaneous-sampling sigma-delta performance and 16-bit accuracy. The integrated PGA provides gain ranges from 1 to 32 without external instrumentation stages, and the TIA directly digitizes photodiode currents for spectroscopy and chromatography instruments. The 1 MB Flash stores 8-point per-channel calibration curves, while the Cortex-M33 DSP extensions implement on-the-fly FFT and decimation filters in firmware, eliminating an external DSP chip.
推荐
Smart Battery Management System
Battery management systems for industrial energy storage and e-mobility benefit from the ADUCM410BBCZ 16-bit ADC with 2 MSPS sampling, which captures cell voltage transients during load switching with sub-millivolt resolution. The Cortex-M33 core runs state-of-charge and state-of-model predictive algorithms, and 1 MB Flash accommodates cell-count-specific firmware variants. The 81-CSPBGA footprint enables compact BMS boards that fit inside prismatic cell modules, and TrustZone isolates cell-pack security keys from application firmware.
推荐
Medical Patient Monitoring Sensor Interface
Patient monitoring devices such as multi-parameter bedside monitors and ambulatory ECG patches use the ADUCM410BBCZ to digitize ECG, SpO2, and temperature channels with 16-bit resolution. The on-chip TIA directly interfaces with pulse oximetry photodiodes, eliminating external transimpedance stages, and the PGA conditions low-amplitude ECG signals before ADC acquisition. TrustZone isolates patient-identifiable health data from connectivity stacks for HIPAA compliance, and the 1 MB Flash stores waveform buffers and compression algorithms.
推荐
Building Automation Multi-Sensor Node
Building automation controllers aggregate CO2, VOC, humidity, and temperature data using the ADUCM410BBCZ as a multi-channel AI hub with 16 input pins supporting differential scanout of Wheatstone-bridge pressure transducers. The Cortex-M33 core runs HVAC control loops and BACnet/Modbus stacks, while 1 MB Flash stores building-floor configuration data. The 81-CSPBGA fits inside ceiling-mounted sensor enclosures, and the -40C to +125C operating range supports unconditioned mechanical-room installations per the ADuCM410 datasheet.
推荐
推荐产品汇总
工程参考数据： ADUCM410BBCZ ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ADUCM410BBCZ-RL | ADUCM411BBCZ | ADUCM410WBSWZ | ADUCM410BBCZ-ENG |
|---|---|---|---|---|---|
| Package | 81-CSPBGA (5x5 mm) | 81-CSPBGA (5x5 mm) - same | 81-CSPBGA (5x5 mm) - same | 81-CSPBGA (5x5 mm) - same | 81-CSPBGA (5x5 mm) - same |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Core | Arm Cortex-M33, 160 MHz | Arm Cortex-M33, 160 MHz | Arm Cortex-M33, 160 MHz | Arm Cortex-M33, 160 MHz | Arm Cortex-M33, 160 MHz |
| Flash | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB |
| ADC Resolution | 16-bit, 2 MSPS | 16-bit, 2 MSPS | 16-bit, 2 MSPS | 16-bit, 2 MSPS | 16-bit, 2 MSPS |
| Hardware Crypto Accelerator | No | No | Yes | No | No |
| Temperature Grade | Industrial -40C to +85C | Industrial -40C to +85C | Industrial -40C to +85C | Extended -40C to +125C | Engineering sample grade |
| Pricing Tier (qty 1) | $18.50 | ~$18.50 | ~$21.00 | ~$22.50 | Engineering quote |
关键差异点
- Highest-density 81-CSPBGA in the ADuCM family （对比 ADUCM320)
- Optional hardware cryptographic accelerator （对比 ADUCM411BBCZ)
- Extended industrial temperature screening （对比 ADUCM410WBSWZ)
设计说明
Estimated: The ADUCM410BBCZ 81-CSPBGA 5x5 mm package requires microvia-in-pad PCB construction with 0.4 mm pitch and stacked-via fan-out. Use a 4-layer stackup with continuous ground plane beneath the BGA and stitching vias every 2 mm to suppress cavity resonances. Per Analog Devices design guidelines for CSPBGA packages, route analog and digital signals on separate planes to minimize ADC coupling, and use length-matched impedance for MDIO clock and data traces per IEEE 802.3.
Estimated: Decouple AVDD (analog supply) and DVDD (digital supply) separately with 100 nF ceramic capacitors placed within 2 mm of each BGA ball, plus a 10 uF bulk capacitor per supply rail. The ADC reference pin requires a 10 uF X7R bypass with a 100 nF parallel cap to achieve the 16-bit noise floor. Per the ADuCM410 datasheet, AVDD and DVDD should be derived from a common regulator with ferrite-bead isolation to prevent digital transients from coupling into the analog front-end.
Estimated: At maximum industrial temperature and 160 MHz operation, the ADuCM410BBCZ dissipates approximately 0.5 W with all peripherals active. The 81-CSPBGA thermal pad must be soldered to a 4-layer board copper plane of at least 25x25 mm for theta_JA under 30 C/W. For applications in the -40C to +125C extended grade, use the ADUCM410WBSWZ variant which is screened for high-temperature reliability per Analog Devices' qualification flow.
Do not assume the ADUCM410 is pin-compatible with older ADuM parts such as the ADuCM320 or ADuCM310 - those use LQFP packages, not the 81-CSPBGA. Do not enable TrustZone without first programming the secure boot region, or the device will not boot. Always route the MDIO clock trace with 50 ohm controlled impedance and avoid routing it across plane splits, per the ADuCM410 datasheet hardware design guide.
合规信息
RoHS compliance confirmed via Analog Devices product page. AEC-Q100 qualification not applicable for this IC grade; consult ADI for AEC-Q100 automotive variants if needed.
