ADUM5413ARWZ-RL7 - Quad-Channel Digital Isolator with isoPower | Analog Devices
料号： ADUM5413ARWZ-RL7 ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $6.5 | $6.50 |
| 10 | $5.85 | $58.50 |
| 100 | $5.2 | $520.00 |
| 500 | $4.68 | $2,340.00 |
| 1,000 | $4.16 | $4,160.00 |
ADUM5413ARWZ-RL7 概述
Digital isolators are components that transmit digital signals across an isolation barrier, providing galvanic isolation to protect sensitive circuitry from high voltages, noise, and ground loops. They are essential in industrial, medical, and communication systems where safety and signal integrity are critical. The ADUM5413 integrates the isolation barrier with a DC-to-DC converter, making it a complete isolated power and data solution.
Key features include four isolated channels (two forward, two reverse), a data rate of up to 150 Mbps, and a propagation delay of 24 ns. The integrated DC-to-DC converter provides up to 500 mW of output power with an efficiency of up to 33%. The device operates from a 3.0V to 5.5V supply and offers a wide operating temperature range of -40°C to +125°C.
The ADUM5413 uses Analog Devices' iCoupler technology, which employs chip-scale transformers instead of optocouplers, offering higher reliability, faster data rates, and lower power consumption. The integrated isoPower converter uses a push-pull architecture to generate isolated power, reducing external component count and board space.
Typical applications include industrial fieldbus isolation, isolated SPI/UART interfaces, power supply control, and medical equipment isolation. The device is ideal for systems requiring both data and power isolation in a compact form factor.
When designing with the ADUM5413, ensure proper PCB layout with adequate creepage and clearance distances for the required isolation rating. The integrated converter requires careful selection of external components, such as the transformer and rectifier diodes, to achieve optimal performance.
直接替换替代料： ADUM5413ARWZ-RL7 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： ADUM5413ARWZ-RL7 （相同外形与封装尺寸） ——差异在于 CMTI, Isolation Rating, Operating Temperature, Package, Data Rate.
快速对比工具——选择替代料号进行并排对比：
ADUM5403ARWZ-RL
✅ 直接替换📋 参考替代料（不在目录中）
ADUM5401ARWZ-RL
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
ADUM5402ARWZ-RL
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
ADUM5404ARWZ-RL
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
ISO7742FDBQR
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$2.35 / 个
查看数据手册 →ISO7741FDBQR
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$0.98 / 个
查看数据手册 →ADUM5413ARWZ-RL7 规格参数
| Number of Channels | 4 (2 forward, 2 reverse) |
| Isolation Rating | 2.5 kVrms |
| 数据速率 | 150 Mbps |
| Propagation Delay | 24 ns |
| Integrated DC-DC Converter | Yes, up to 500 mW |
| Output Power | 500 mW |
| 电源电压 | 3.0 V to 5.5 V |
| 工作温度 | -40°C to +125°C |
| 封装 | 16-lead SOIC-W |
| 安装类型 | Surface Mount |
| Technology | iCoupler |
| CMTI | 25 kV/µs |
| RoHS 状态 | Compliant |
| MSL 等级 | 3 |
| Isolation Voltage | 2500 Vrms |
ADUM5413ARWZ-RL7 引脚配置
| 引脚 1 | VDD1 — Primary side supply voltage |
| 引脚 2 | GND1 — Primary side ground |
| 引脚 3 | VIA — Input channel A |
| 引脚 4 | VIB — Input channel B |
| 引脚 5 | VOC — Output channel C |
| 引脚 6 | VOD — Output channel D |
| 引脚 7 | GND1 — Primary side ground |
| 引脚 8 | NC — No connect |
| 引脚 9 | VISO — Isolated output voltage |
| 引脚 10 | GNDISO — Isolated ground |
| 引脚 11 | VOA — Output channel A |
| 引脚 12 | VOB — Output channel B |
| 引脚 13 | VIC — Input channel C |
| 引脚 14 | VID — Input channel D |
| 引脚 15 | GNDISO — Isolated ground |
| 引脚 16 | VDD2 — Secondary side supply voltage |
典型应用
ADUM5413ARWZ-RL7 适用于 6 应用s: Industrial Fieldbus Isolation, Isolated SPI/UART Interface, Power Supply Control, Medical Equipment Isolation, Isolated Sensor Interface, Isolated Gate Driver Power.
Industrial Fieldbus Isolation
The ADUM5413ARWZ-RL7 provides galvanic isolation for industrial fieldbus interfaces such as RS-485, CAN, and Profibus. Its integrated isoPower converter supplies isolated power to the bus transceiver, eliminating the need for a separate isolated DC-DC converter. With a data rate of 150 Mbps and CMTI of 25 kV/µs, it ensures reliable communication in noisy industrial environments. The 2.5 kVrms isolation rating protects control electronics from ground loops and voltage transients. This solution reduces board space and component count, simplifying design and improving reliability.
推荐
Isolated SPI/UART Interface
The ADUM5413ARWZ-RL7 is ideal for isolating SPI or UART interfaces between microcontrollers and peripheral devices. Its four channels can be configured for bidirectional communication, and the integrated DC-DC converter powers the isolated side. The high data rate of 150 Mbps supports fast SPI clocks, while the low propagation delay of 24 ns minimizes latency. The device operates from 3.0V to 5.5V, making it compatible with both 3.3V and 5V logic. This simplifies the design of isolated sensor interfaces and data acquisition systems.
推荐
Power Supply Control
In power supply designs, the ADUM5413ARWZ-RL7 provides isolated feedback and control signals between the primary and secondary sides. The integrated isoPower converter can power the secondary-side control circuitry, eliminating the need for an auxiliary winding. The device's high CMTI ensures stable operation in the presence of switching noise. With up to 500 mW of isolated power, it can drive optocouplers, gate drivers, or small microcontrollers. This reduces component count and improves reliability compared to discrete isolation solutions.
推荐
Medical Equipment Isolation
The ADUM5413ARWZ-RL7 is suitable for medical devices requiring patient isolation, such as ECG monitors, defibrillators, and infusion pumps. Its 2.5 kVrms isolation rating meets safety standards for medical equipment. The integrated DC-DC converter provides isolated power to sensors and analog front-ends, reducing leakage currents. The high data rate and low propagation delay ensure accurate signal transmission for real-time monitoring. The device's small footprint and high reliability make it ideal for portable medical devices.
推荐
Isolated Sensor Interface
The ADUM5413ARWZ-RL7 can isolate sensor interfaces in industrial and automotive applications. It provides galvanic isolation between sensors and the main controller, preventing ground loops and noise interference. The integrated DC-DC converter powers the sensor side, simplifying wiring. With a data rate of 150 Mbps, it can handle high-speed sensor data such as from encoders or resolvers. The wide operating temperature range of -40°C to +125°C makes it suitable for harsh environments.
推荐
Isolated Gate Driver Power
The ADUM5413ARWZ-RL7 can provide isolated power and signal isolation for gate drivers in power electronics. The integrated DC-DC converter supplies the gate driver's floating supply, while the digital channels transmit PWM signals across the isolation barrier. This eliminates the need for separate isolated power supplies, reducing complexity. The high CMTI ensures reliable operation in the presence of fast switching transients. The device is suitable for motor drives, inverters, and switch-mode power supplies.
推荐
推荐产品汇总
工程参考数据： ADUM5413ARWZ-RL7 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ADUM5403ARWZ-RL | ADUM5401ARWZ-RL | ISO7742FDBQR |
|---|---|---|---|---|
| Package | 16-lead SOIC-W | 16-lead SOIC-W | 16-lead SOIC-W | 16-lead SOIC-W |
| Brand | Analog Devices | Analog Devices | Analog Devices | Texas Instruments |
| Number of Channels | 4 (2 forward, 2 reverse) | 4 (2 forward, 2 reverse) | 4 (2 forward, 2 reverse) | 4 (2 forward, 2 reverse) |
| Isolation Rating | 2.5 kVrms | 2.5 kVrms | 2.5 kVrms | 5 kVrms |
| Data Rate | 150 Mbps | 1 Mbps | 1 Mbps | 100 Mbps |
| Integrated DC-DC Converter | Yes (500 mW) | Yes (500 mW) | Yes (500 mW) | No |
| Supply Voltage | 3.0V to 5.5V | 3.0V to 5.5V | 3.0V to 5.5V | 2.25V to 5.5V |
| CMTI | 25 kV/µs | 25 kV/µs | 25 kV/µs | 100 kV/µs |
关键差异点
- Integrated isoPower DC-DC converter （对比 ISO7742FDBQR)
- Higher data rate （对比 ADUM5403ARWZ-RL)
- Lower propagation delay （对比 ADUM5403ARWZ-RL)
设计说明
For the ADUM5413ARWZ-RL7, ensure proper PCB layout with adequate creepage and clearance distances for the 2.5 kVrms isolation rating. Maintain a minimum of 8 mm creepage and clearance between primary and secondary sides. Use a solid ground plane under the device to reduce EMI. Place decoupling capacitors close to VDD1 and VDD2 pins.
The integrated isoPower converter requires careful selection of external components. Use a ferrite bead and capacitors on the input supply to filter noise. The output power is limited to 500 mW; ensure the load does not exceed this. For higher power, consider using an external isolated DC-DC converter.
The ADUM5413ARWZ-RL7 dissipates power internally due to the DC-DC converter. At maximum load, the power dissipation can be significant. Ensure adequate thermal relief on the PCB, such as thermal vias under the device, to keep the junction temperature within limits. The operating temperature range is -40°C to +125°C.
合规信息
RoHS compliant per Analog Devices product page. Not AEC-Q100 qualified. Lead-free.
