ADV7343WBSTZ-RL - 6-Channel 11-Bit Video Encoder | Analog Devices
料号: ADV7343WBSTZ-RL ✗ 停产ADV7343WBSTZ-RL 概述
A video encoder is a data-converter IC that converts digital video signals into legacy analog formats for display and downstream processing. Within the signal-chain hierarchy, the ADV7343 belongs to the video encoder class, uses multiple digital-to-analog converters, and integrates high-speed parallel digital video inputs with analog composite and component outputs. This makes it a bridge between digital video processing systems and equipment that still relies on analog video connections.
Key features include six high-speed 11-bit DACs with an update rate of up to 297 MHz, 3.3 V operation, and support for composite, S-Video, YPrPb, and RGB outputs. The 64-lead LQFP package exposes the complete digital interface, analog output channels, reference connections, control signals, and power pins. The manufacturer describes the ADV7343 family as a multiformat video encoder intended for DVD and Blu-ray applications.
Each internal DAC provides 11-bit digital resolution, allowing the encoder to represent luminance and chrominance levels required by standard-definition analog video. Six outputs support simultaneous generation of composite and component signals or multiple S-Video channels. The 297 MHz DAC rate defines the maximum conversion throughput and is particularly relevant when the design must accommodate standard-definition and progressive video formats within the device's supported timing range.
Typical applications include DVD and Blu-ray player output stages, set-top-box and video-conversion equipment, professional analog video monitoring, broadcast production interfaces, and industrial video systems that must retain compatibility with CVBS, S-Video, or component displays. The encoder can also be used in test equipment that requires simultaneous analog representations of a digital video source.
The primary design consideration is output-termination and signal-integrity management. Each analog output should use the recommended termination and filtering network, while digital video inputs require controlled-impedance routing and short traces. Use the pin-description table and application information in the Analog Devices ADV7343 datasheet when assigning the 64 package pins and laying out the converter outputs.
This page combines the confirmed device characteristics with practical placement guidance, application-fit analysis, and package-level selection criteria. It also documents lifecycle and sourcing constraints so engineers can evaluate the ADV7343WBSTZ-RL against alternatives before committing a new design.
直接替换替代料: ADV7343WBSTZ-RL ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: ADV7343WBSTZ-RL (相同外形与封装尺寸) ——差异在于 Number of Video DACs, Package.
ADV7343WBSTZ
✅ 直接替换联系询价
查看数据手册 →ADV7343WBSTZ-RL 最大额定值与电气特性
| Product Type | Multiformat Video Encoder |
| Manufacturer | Analog Devices |
| Number of Video DACs | 6 |
| DAC Resolution | 11 bit |
| Maximum DAC Update Rate | 297 MHz |
| 电源电压 | 3.3 V |
| Supported Video Formats | Composite CVBS, S-Video, YPrPb, RGB |
| 封装 | 64-lead LQFP (10 mm x 10 mm) |
| 引脚数 | 64 |
| 安装类型 | Surface Mount |
| Target Applications | DVD and Blu-ray video output |
| Product Category | Encoders, Decoders, Converters |
| Lifecycle Recommendation | Not recommended for new designs |
| Evaluation Board | EVAL-ADV7343 |
ADV7343WBSTZ-RL 64-lead lqfp (10 mm x 10 mm) 引脚配置指南
ADV7343WBSTZ-RL(64-lead lqfp (10 mm x 10 mm) 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: ADV7343WBSTZ-RL.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ADV7343WBSTZ-RL 适用于 6 应用s: DVD and Blu-ray Player Video Outputs, Set-Top-Box Composite and S-Video Output, Professional Analog Video Monitoring, Broadcast Video Conversion Equipment, Industrial Video Interface and Retrofit, Video Test and Signal Generation.
DVD and Blu-ray Player Video Outputs
The ADV7343WBSTZ-RL fits DVD and Blu-ray player output stages that must provide legacy television connections in addition to digital video. Its six 11-bit DACs, each capable of operation up to 297 MHz, can generate composite CVBS, S-Video Y/C, or component YPrPb and RGB outputs from the same encoder. The 3.3 V supply and 64-lead LQFP package simplify integration into compact consumer and professional deck designs. The original platform must already support the ADV7343 register set and selected video timing.
推荐
Set-Top-Box Composite and S-Video Output
The ADV7343WBSTZ-RL is appropriate for set-top-box and video-conversion products that need several analog television outputs from one device. Six 11-bit converter channels provide the flexibility to implement composite CVBS, S-Video Y/C, or component outputs while limiting the number of external video DAC packages. The 297 MHz maximum DAC rate supports the device's documented high-speed operation, and the 10 mm by 10 mm LQFP places the converter, digital interface, and analog outputs in a single controlled footprint.
推荐
Professional Analog Video Monitoring
The ADV7343WBSTZ-RL can support professional monitoring equipment that must convert digital video into component, S-Video, or composite signals for downstream displays and processors. Its six 11-bit DACs allow multiple outputs to be generated while preserving one common digital video source. Analog Devices specifically identifies the ADV7343 family for high-speed video encoding applications. Design work should include the manufacturer's recommended output filtering, termination, ground-plane, and controlled-impedance digital routing details.
推荐
Broadcast Video Conversion Equipment
The ADV7343WBSTZ-RL suits broadcast and production equipment that must bridge modern digital video processing with legacy analog monitoring paths. Six high-speed, 11-bit DAC channels running at up to 297 MHz provide flexible routing across composite, S-Video, and component formats. A single 64-lead LQFP device consolidates multiple analog outputs around one digital input system. Because the part is not recommended for new designs, the strongest application fit is an established platform needing a production-continuation or repair replacement.
推荐
Industrial Video Interface and Retrofit
The ADV7343WBSTZ-RL is useful in industrial video retrofit and long-life equipment programs that retain composite or component interfaces. The six 11-bit DAC channels and 297 MHz maximum update rate support the established high-speed encoder architecture, while the 64-lead LQFP allows replacement of an existing ADV7343 footprint without changing the board outline. Verify legacy timing requirements, register compatibility, thermal performance, and supply continuity during maintenance rather than starting a new platform around the part.
推荐
Video Test and Signal Generation
The ADV7343WBSTZ-RL can be integrated into video test equipment that must produce conventional analog television signals from digital sources. Its six configurable 11-bit DAC channels permit composite, S-Video, and component generation from one encoder, and the 297 MHz DAC rate supports the device's high-speed conversion capability. For laboratory instrumentation, pay particular attention to clock jitter, video timing accuracy, analog output filtering, and reference-source layout according to the manufacturer's data sheet.
推荐
推荐产品汇总
工程参考数据: ADV7343WBSTZ-RL ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ADV7343WBSTZ |
|---|---|---|
| Manufacturer | Analog Devices | Analog Devices |
| Package | 64-LQFP (10 mm x 10 mm) | 64-LQFP (10 mm x 10 mm) |
| Device Type | Multiformat Video Encoder | Multiformat Video Encoder |
| Number of Video DACs | 6 | 6 |
| DAC Resolution | 11 bit | 11 bit |
| Maximum DAC Update Rate | 297 MHz | 297 MHz |
| Supply Voltage | 3.3 V | 3.3 V |
| Supported Analog Formats | Composite CVBS, S-Video, YPrPb, RGB | Composite CVBS, S-Video, YPrPb, RGB |
| Order-Code Packing | Reel packed, -RL suffix | Base order code without the -RL suffix |
| New-Design Recommendation | Not recommended for new designs | Not recommended for new designs |
关键差异点
- Six integrated analog video converter channels (对比 ADV7343WBSTZ)
- Reel-packed production order code (对比 ADV7343WBSTZ)
- Multiformat output coverage (对比 ADV7343WBSTZ)
设计说明
Route the digital video interface as a controlled-impedance network and keep clock and data traces short and tightly referenced to a continuous ground plane. The 64-lead LQFP places analog, digital, power, and reference functions in one package, so partition the board so high-energy output and supply-return paths do not cross the digital input region. Follow the package and board-layout guidance in the Analog Devices ADV7343 data sheet.
Implement the manufacturer's recommended termination and filtering on every used analog video output, and reserve unused output channels according to the data-sheet guidance. Video quality can be affected by incorrect source termination, excessive filter loading, or output-stage impedance mismatch. Check DAC output compliance, resistor values, and connector return paths against the published application circuit before releasing the PCB.
Decouple the 3.3 V supply locally and follow the exact recommended capacitor network and placement shown in the ADV7343 data sheet. Six high-speed DACs can require substantial transient current when output stages switch, so inadequate local supply impedance may appear as noise or timing instability on the encoded video. Keep the analog and digital return paths joined under the package while avoiding high-current loops through the exposed analog-output region.
合规信息
RoHS, REACH, halogen-free, and conflict-minerals declarations were not confirmed in the manufacturer product information. AEC-Q100 is not applicable to this general-purpose video encoder based on the identified application class.