Analog Devices

ADV7403KSTZ-140 - 12-Bit 140MHz Video Decoder | Analog Devices

料号: ADV7403KSTZ-140 ✗ 停产
100-LQFP, 14 x 14 mm Package
最小起订量: 1 |

ADV7403KSTZ-140 概述

The Analog Devices ADV7403KSTZ-140 is a 12-bit integrated multiformat SDTV/HDTV video decoder and RGB graphics digitizer with four 140 MHz NSV ADCs, a 12-channel analog input multiplexer, and digital ITU-R BT.656 output. The device supports PAL, NTSC, and SECAM composite or S-video inputs and is packaged in a 100-LQFP, 14 x 14 mm package.

A video decoder is an interface IC that converts analog video signals into a digital pixel stream. The ADV7403 combines analog front-end conversion, multiformat decoding, graphics digitization, and digital output in one device. This integration reduces the need for separate ADC, decoder, and routing blocks while providing a defined path from composite or S-video inputs to a digital video processor.

Key features include 12-bit processing, four 140 MHz NSV analog-to-digital converters, a 12-channel analog multiplexer, support for composite and S-video sources, PAL/NTSC/SECAM decoding, and digital ITU-R BT.656 output. The four current and voltage clamp control loops help remove DC offsets from analog inputs, while the integrated multiplexer supports multisource connection without an external multiplexer.

The KSTZ-140 designation identifies the 140 MHz performance option. The analog front end and digital processing are designed for SDTV and HDTV video conversion, including professional monitoring, broadcast, surveillance, video capture, and embedded display systems. The 100-LQFP package provides a defined footprint for boards requiring numerous analog, digital, power, and ground connections.

Typical deployments place the device after an analog video connector and before an FPGA, video scaler, frame grabber, display controller, or digital video processor. Composite and S-video sources can be selected through the integrated multiplexer, and the resulting digital output can be routed according to the system's decoding and processing requirements.

A key design consideration is signal integrity. The analog input path should use controlled impedance routing, short connections, appropriate grounding, and connector placement that minimizes noise pickup. Power, clock, serial digital output, and analog input nets should follow the manufacturer's recommended decoupling and layout guidance, particularly when the input bandwidth approaches the 140 MHz converter capability.

This product page combines the manufacturer description, distributor listings, package information, lifecycle indication, and documented family references. It also provides application guidance, comparison points, and design notes to help engineers evaluate the ADV7403KSTZ-140 when selecting a dedicated multiformat video decoder for a new or existing video-processing design.

直接替换替代料: ADV7403KSTZ-140 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: ADV7403KSTZ-140 (相同外形与封装尺寸) ——差异在于 Package, ADC Resolution, Digital Output Format, Product Type, Operating Temperature Range.

Analog Devices
Product Type: 10-bit multiformat SDTV/HDTV video decoder and RGB graphics digitizer
对比 ADV7403KSTZ-140 →
Analog Devices
Package: 100-lead LQFP, 14 mm x 14 mm
ADC Resolution: 10 bit
Digital Output Format: ITU-R BT.656
对比 ADV7403KSTZ-140 →
Analog Devices
Package: 100-lead LQFP, 14 mm x 14 mm
Digital Output Format: Serial ITU-R BT.656
Product Type: 10-bit multiformat SDTV/HDTV video decoder and RGB graphics digitizer
对比 ADV7403KSTZ-140 →
Analog Devices
Package: 100-lead LQFP
ADC Resolution: 12 bit
Digital Output Format: Serial ITU-R BT.656
对比 ADV7403KSTZ-140 →

ADV7403BSTZ-110

✅ 直接替换
Analog Devices
📦 100-LQFP (14 x 14 mm)
Multiformat video decoder and RGB graphics digitizer · 12 bit · 110 MHz · 4 · 12 · PAL, NTSC, and SECAM · Composite and S-Video · Serial ITU-R BT.656

联系询价

查看数据手册 →

ADV7401KSTZ-140

✅ 直接替换
Analog Devices
📦 100-LQFP (14 x 14 mm)
10-bit multiformat SDTV/HDTV video decoder and RGB graphics digitizer · PAL, NTSC, SECAM · Composite and S-video · Serial ITU-R BT.656 · 10 bit · 3.3 V · 1.8 V · RGB graphics digitization

联系询价

查看数据手册 →

ADV7401BSTZ-110

✅ 直接替换
Analog Devices
📦 100-LQFP (14 x 14 mm)
Video decoder and RGB graphics digitizer · 10 bit · 4 channels · PAL, NTSC, and SECAM · Composite and S-video · ITU-R BT.656 · Single-chip multiformat decoder and digitizer · SDTV and HDTV

联系询价

查看数据手册 →

ADV7403KSTZ-140 规格参数

功能 12-bit integrated multiformat SDTV/HDTV video decoder and RGB graphics digitizer
Analog Input Support PAL, NTSC, and SECAM composite or S-video
Digital Output Serial ITU-R BT.656
ADC Resolution 12-bit
Number of ADCs 4
ADC Sampling Rate 140 MHz
Analog Multiplexer Channels 12
External Multiplexer Requirement Not required for multisource connection
DC Offset Control 4 current and voltage clamp control loops
Video Formats PAL, NTSC, SECAM
封装 100-LQFP, 14 x 14 mm
Package Pin Count 100 pins
安装类型 Surface mount
Product Status Not recommended for new designs
RoHS 状态 Compliant

ADV7403KSTZ-140 100 pins 引脚配置指南

ADV7403KSTZ-140(100 pins 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

ADV7403KSTZ-140 的 100 pins 封装引脚图

暂无详细引脚数据: ADV7403KSTZ-140.

请参阅 数据手册 以查看完整引脚配置。

典型应用

ADV7403KSTZ-140 适用于 6 应用s: Broadcast Video Monitoring, Professional Video Conversion, Security Surveillance Systems, Video Capture and Frame Grabbing, Embedded Display Systems, Video Test and Measurement.

📺

Broadcast Video Monitoring

The ADV7403KSTZ-140 fits broadcast monitoring equipment that must accept legacy composite or S-video sources and provide a digital video path. Its four 140 MHz 12-bit ADCs, 12-channel analog multiplexer, and PAL/NTSC/SECAM support allow multiple analog sources to be connected without a separate external multiplexer. The resulting ITU-R BT.656 output can feed an FPGA, scaler, or frame-processing block. Design attention should center on clean analog routing, controlled ground return, and synchronization of the digital output with downstream timing.

🖥️

Professional Video Conversion

The ADV7403KSTZ-140 is appropriate for professional video conversion equipment that combines analog compatibility with a high-speed digital interface. The integrated multiformat decoder supports PAL, NTSC, and SECAM composite or S-video, while the four 140 MHz converters provide the analog front end for demanding signal paths. Use the device ahead of an FPGA or digital video engine when the system requires a standardized ITU-R BT.656 output. Verify clocking, active-video timing, and source-specific signal levels against the manufacturer electrical and application data.

🎥

Security Surveillance Systems

The ADV7403KSTZ-140 can be used in surveillance systems that need to digitize composite camera signals before analysis, recording, or display. Its four 140 MHz ADCs and integrated 12-channel multiplexer support several analog source connections in a compact design, reducing the need for external switching. The ITU-R BT.656 output provides a defined digital interface for an FPGA, image processor, or storage controller. In installed cameras and long cable runs, input protection, connector isolation, grounding, and careful analog trace routing are particularly important.

🖥️

Video Capture and Frame Grabbing

The ADV7403KSTZ-140 is suitable for video capture cards and frame grabbers that combine legacy analog inputs with high-speed digital pixel processing. Its multiformat decoder handles composite and S-video sources, and the 140 MHz ADC option supports demanding analog front-end bandwidth. The digital ITU-R BT.656 output can be consumed by an FPGA or embedded processor for scaler, compression, or storage functions. Board layout should minimize analog trace length, maintain a continuous reference plane, and separate high-speed digital outputs from sensitive input nodes.

📺

Embedded Display Systems

The ADV7403KSTZ-140 can serve as the analog input stage in an embedded display system that must accept PAL, NTSC, or SECAM composite video and convert it to digital pixels. The integrated multiplexer permits multiple source selection, while the four 140 MHz ADCs support the analog signal path needed by high-speed video systems. A downstream FPGA, scaler, or display controller can receive the ITU-R BT.656 output. The implementation should account for synchronization, blanking levels, cable termination, and protection against ESD on externally accessible connectors.

🔧

Video Test and Measurement

The ADV7403KSTZ-140 is useful in video test equipment and signal-conversion fixtures that need to normalize multiple analog formats into a common digital representation. Its support for composite and S-video, integrated 12-channel multiplexer, and 140 MHz ADC option make it suitable for laboratory and production test paths. The output can be analyzed by an FPGA or processor to verify timing, active area, and signal integrity. Test-fixture layouts should include repeatable input attenuation, protected connections, stable references, and calibrated timing measurement points.

What is the ADV7403KSTZ-140 used for?
The ADV7403KSTZ-140 is an integrated multiformat video decoder and RGB graphics digitizer used to convert PAL, NTSC, and SECAM composite or S-video into a digital ITU-R BT.656 stream. It combines four 140 MHz 12-bit ADCs, a 12-channel analog multiplexer, and digital video processing in one package. The device is suitable for broadcast, monitoring, surveillance, video capture, and embedded display systems that need a dedicated analog-to-digital video conversion path.
What are the key specifications of ADV7403KSTZ-140?
The ADV7403KSTZ-140 provides four 140 MHz, 12-bit NSV ADCs, a 12-channel analog input multiplexer, and digital ITU-R BT.656 output. According to the Analog Devices ADV7403 product page and datasheet, the device supports PAL, NTSC, and SECAM composite or S-video inputs and includes four current and voltage clamp control loops for DC-offset removal. Its package is a 100-LQFP measuring 14 x 14 mm.
Is ADV7403KSTZ-140 suitable for HDTV and SDTV video?
Yes, the ADV7403KSTZ-140 is explicitly described as a 12-bit integrated multiformat SDTV/HDTV video decoder and RGB graphics digitizer. Its four 140 MHz ADC channels provide the analog front end for high-speed video conversion, while the digital processing stage produces an ITU-R BT.656 output. The exact supported resolution and pixel-clock limits should be confirmed in the manufacturer's current datasheet for the intended video timing.
Where to download the ADV7403KSTZ-140 datasheet PDF?
The official ADV7403KSTZ-140 datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7403.pdf. The manufacturer product page at https://www.analog.com/en/products/adv7403.html provides the product status, documentation, evaluation-kit information, and selection information. Use the manufacturer PDF for final pin assignments, electrical limits, timing, and application guidance.
Where can I find the ADV7403KSTZ-140 pinout?
The ADV7403KSTZ-140 pinout should be taken from the Analog Devices ADV7403 datasheet rather than inferred from the distributor summary. The device uses a 100-LQFP, 14 x 14 mm package, but the supplied listings do not reproduce the complete numbered pin-description table. The package library key is lqfp-100, while the full pinout remains null until the manufacturer pin table is transcribed exactly.
What is the difference between ADV7403KSTZ-140 and ADV7403BSTZ-110?
The ADV7403KSTZ-140 is the 140 MHz version, while the ADV7403BSTZ-110 is identified in comparison listings as the 110 MHz version. Both are associated with the ADV7403 multiformat video decoder family, but the KSTZ-140 provides a higher specified analog front-end sampling rate: 140 MHz versus 110 MHz, a 27.3% increase. Verify pin compatibility, temperature grade, and the complete ordering information in the manufacturer datasheet before substituting.
Can ADV7403BSTZ-110 replace ADV7403KSTZ-140?
ADV7403BSTZ-110 may be considered only after confirming the complete ordering code, pinout, electrical limits, and video timing requirements. The main documented difference is the 110 MHz versus 140 MHz ADC specification, so the replacement can reduce analog front-end performance. The family packaging is identified as 100-LQFP in the distributor data, but a same-family listing alone does not prove every application-level timing condition is equivalent.
What is the best drop-in replacement for ADV7403KSTZ-140?
ADV7403BSTZ-110 is the closest identified same-family replacement candidate because it is also an ADV7403 video decoder in the 100-LQFP package. However, its 110 MHz ADC specification is lower than the ADV7403KSTZ-140's 140 MHz specification, and the available comparison data does not confirm every pin or ordering-code detail. No unqualified replacement should be selected without reviewing the current manufacturer datasheet and validating the complete system timing.
What can replace ADV7403KSTZ-140?
The identified replacement candidates are ADV7403BSTZ-110, ADV7401KSTZ-140, and ADV7401BSTZ-110, which appear in the available family and comparison records. Their suitability depends on whether the required package, pin assignments, decoder formats, ADC performance, and digital timing match the original design. The ADV7403BSTZ-110 candidate is closest by family, while ADV7401-family parts require additional verification before use as a drop-in substitute.
Is ADV7403KSTZ-140 the same as ADV7401KSTZ-140?
No, the ADV7403KSTZ-140 and ADV7401KSTZ-140 are different Analog Devices decoder models, even though both are listed in comparison records with the 140 MHz suffix and 100-LQFP-family context. The ADV7403 is described as a 12-bit multiformat SDTV/HDTV video decoder and RGB graphics digitizer, while the ADV7401 is a separate product family. They should not be treated as automatically interchangeable without a complete pin and functional comparison.
Is ADV7403KSTZ-140 suitable for a 140 MHz video input design?
The ADV7403KSTZ-140 is specifically associated with four 140 MHz NSV ADCs in the Analog Devices datasheet description. That makes it the relevant family member when the design requires the higher 140 MHz analog front-end option. Actual signal integrity, timing margin, and synchronization behavior still depend on the source impedance, board layout, clocking, and the complete digital timing implementation.
What power and thermal data are available for ADV7403KSTZ-140?
The ADV7403KSTZ-140 is a high-speed mixed-signal video decoder in a 100-LQFP package, and thermal and power analysis should be based on the current Analog Devices datasheet. The supplied product records identify the device as a 12-bit, 140 MHz multiformat video decoder but do not provide complete supply-current, power-dissipation, or junction-temperature tables. Use the manufacturer electrical characteristics and application guidance when sizing the power supply and PCB thermal design.
How should the ADV7403KSTZ-140 analog inputs be routed?
Route the analog video inputs with short, controlled-impedance traces and keep the analog section physically separated from high-current switching paths and digital clock signals. Use a solid ground plane, minimize loop areas, and place input protection and termination close to the source connector. The 12-channel multiplexer and four 140 MHz ADCs require careful reference-plane continuity, so the manufacturer's recommended layout and decoupling guidance should be applied.
Is ADV7403KSTZ-140 RoHS compliant?
The available product listing identifies the ADV7403KSTZ-140 as RoHS compliant. The Analog Devices product page describes the part as not recommended for new designs, so lifecycle planning should account for that status even when an existing design uses the device. Final environmental, material, and qualification claims should be confirmed against the current manufacturer product documentation.
Where can I buy ADV7403KSTZ-140 and what is its lead time?
The ADV7403KSTZ-140 can be requested through the Request a Quote form on this page for current availability, price, minimum order quantity, and lead time. The manufacturer product page identifies the device as not recommended for new designs, so engineers should also confirm lifecycle and sourcing support before starting a production design. Use the form rather than relying on a historical listing or an unverified stock quantity.

工程参考数据: ADV7403KSTZ-140 ——对比、设计指导和合规信息。

选型指南

Choose ADV7403KSTZ-140 when the design specifically needs the ADV7403 family's 140 MHz analog front end, four 12-bit converters, integrated 12-channel multiplexing, and multiformat decoding into ITU-R BT.656. Choose ADV7403BSTZ-110 when the system can operate within a 110 MHz analog front end and the complete ordering, pin, timing, and thermal requirements are otherwise equivalent. Treat ADV7401KSTZ-140 and ADV7401BSTZ-110 as different-family candidates that require a careful functional review rather than automatic substitutions. For a new design, first confirm lifecycle support because Analog Devices marks the ADV7403 family as not recommended for new designs. For an existing design, validate the replacement against the original schematic, pin assignments, input timing, output synchronization, and thermal requirements.

与替代料对比

参数 本产品 ADV7403BSTZ-110 ADV7401KSTZ-140 ADV7401BSTZ-110
Package 100-LQFP (14 x 14 mm) 100-LQFP (14 x 14 mm) 100-LQFP (14 x 14 mm) 100-LQFP (14 x 14 mm)
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Product Family ADV7403 ADV7403 ADV7401 ADV7401
ADC Sampling Rate 140 MHz 110 MHz 140 MHz 110 MHz

关键差异点

  • Higher specified ADC sampling rate (对比 ADV7403BSTZ-110)
  • Dedicated 12-channel analog multiplexer (对比 ADV7401KSTZ-140)
  • Single-chip multiformat conversion (对比 ADV7401BSTZ-110)

设计说明

Route the four analog converter inputs with short traces, a continuous reference plane, and minimal loop area. Keep the 12-channel analog multiplexer and input circuitry away from switching-power nodes and high-speed digital clock traces. Because the device includes four 140 MHz converters, small layout discontinuities and shared-impedance effects can affect signal integrity. Use the manufacturer's recommended reference-plane, decoupling, and connector arrangement for the 100-LQFP implementation.

Separate analog, digital, and clock-supply return paths as far as the device pin definitions and datasheet recommendations allow. Place required bypass capacitors close to their associated supply pins and provide a low-impedance distribution path for high-speed switching current. Do not estimate supply current from the 140 MHz ADC frequency alone; use the manufacturer's operating-condition tables to size the regulator and power distribution network.

Do not treat the ADV7403BSTZ-110 as automatically equivalent to the ADV7403KSTZ-140 merely because both belong to the ADV7403 family. The documented ADC option changes from 140 MHz to 110 MHz, and ordering codes may also encode grade or temperature information. Verify the complete pin table, electrical limits, supported output timing, and thermal conditions before approving a substitution.

Treat the digital ITU-R BT.656 output as a high-speed routed interface and keep its trace geometry consistent across the board. Provide a continuous ground reference, avoid unnecessary stubs, and place any required termination where the clocking and edge-rate data support the decision. Confirm source synchronization, clock relationship, and receiver setup requirements in the complete timing specification rather than inferring them solely from the output format name.

合规信息

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The available product listing identifies the part as RoHS compliant. No additional REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals information was provided. The product is a video interface IC and is not identified as an automotive-qualified device in the available records.

数据核验日期: 2026-11-16 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

ADV7403KSTZ-140 datasheet ADV7403KSTZ-140 pinout ADV7403KSTZ-140 datasheet pdf ADV7403KSTZ-140 equivalent ADV7403KSTZ-140 replacement ADV7403KSTZ-140 cross reference ADV7403KSTZ-140 vs ADV7403BSTZ-110 ADV7403KSTZ-140 vs ADV7401KSTZ-140 ADV7403KSTZ-140 100 LQFP ADV7403KSTZ-140 video decoder ADV7403KSTZ-140 140 MHz ADC Analog Devices ADV7403KSTZ-140 ADV7403KSTZ-140 price ADV7403KSTZ-140 stock ADV7403KSTZ-140 ITU-R BT.656

相关元器件 & 术语

Analog Devices ADV7403KSTZ-140 ADV7403BSTZ-110 ADV7401KSTZ-140 ADV7401BSTZ-110 video decoder RGB graphics digitizer video interface IC multiformat video decoder SDTV HDTV PAL NTSC SECAM ITU-R BT.656 12-bit ADC 140 MHz sampling 12-channel analog multiplexer current clamp voltage clamp 100-LQFP QFN family surface mount SMD composite video S-Video RoHS broadcast monitoring surveillance systems video capture
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情