AK5385BVF - 24-Bit 216kHz Stereo Audio ADC | AKM
料号: AK5385BVF ✓ 量产中AK5385BVF 概述
An audio ADC is a specialized analog-to-digital converter that accepts differential or single-ended audio signals, converts them into high-resolution digital words, and supplies those words to a digital signal processor, audio codec, transmitter, or storage system. Within the semiconductor hierarchy, the AK5385BVF belongs to the ADC/DAC class of data-conversion integrated circuits and is specifically positioned for high-end audio acquisition rather than general-purpose instrumentation.
The AK5385B architecture is the central technical feature of the device. According to the manufacturer datasheet, its modulator uses Enhanced Dual Bit architecture, combining a 24-bit conversion format with a sampling rate reaching 216kHz. The family description identifies the converter as a two-channel ADC intended for high-end audio systems, while the available ordering information identifies the AK5385BVF as the 28-pin VSOP configuration.
The AK5385BVF is suitable for professional audio equipment, broadcast and recording systems, digital mixing consoles, and high-resolution audio interface designs. Two conversion channels allow simultaneous left- and right-channel capture when the circuit is configured accordingly. The 8kHz minimum sampling rate supports applications that do not require the highest-rate operation, while the 216kHz maximum rate accommodates high-resolution and professional audio workloads.
The serial interface and dual-channel architecture make the converter appropriate for systems that transmit audio data to a digital processing stage rather than using a parallel data bus. Its 28-pin VSOP package also supports compact PCB layouts, although pin assignment, exposed-pad treatment, and the full electrical limits must be checked against the manufacturer datasheet before schematic capture and layout release.
The main design task is preserving the quality of the analog input path. Designers should follow the manufacturer’s recommended application circuit, maintain short and symmetrically routed analog inputs, provide appropriate input biasing, and place input and decoupling components close to the associated device pins. Power, ground, and clock arrangements also require careful partitioning so switching and digital activity do not degrade the converted audio signal.
This product page consolidates the exact AK5385BVF ordering information, confirmed 24-bit and 216kHz capabilities, package identification, technical replacement analysis, and application-focused design guidance. It is intended to help engineers identify the correct converter, plan a compliant PCB footprint, and select a replacement only when channel count, resolution, sampling rate, interface, and pin compatibility have all been confirmed.
直接替换替代料: AK5385BVF ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
AK5385AVF
✅ 直接替换联系询价
查看数据手册 →AK5385A
✅ 直接替换📋 参考替代料(不在目录中)
AK5385BVF 最大额定值与电气特性
| Product Type | 24-bit, two-channel audio ADC |
| Conversion Resolution | 24 bit |
| Number of Channels | 2 channels |
| Sampling Rate Range | 8kHz to 216kHz |
| Maximum Sampling Rate | 216kHz |
| Minimum Sampling Rate | 8kHz |
| Nominal Family Sampling Rate | 192kHz |
| Converter Architecture | Enhanced Dual Bit delta-sigma modulator |
| Output Data Format | Serial |
| 封装 | 28-pin VSOP |
| 安装类型 | Surface mount |
| Package Pin Pitch | 1.27 mm |
| Analog Signal-to-Noise Ratio | 114 dB |
AK5385BVF 1.27 mm 引脚配置指南
AK5385BVF(1.27 mm 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: AK5385BVF.
请参阅 数据手册 以查看完整引脚配置。
典型应用
AK5385BVF 适用于 6 应用s: Professional Audio Recording, Digital Mixing Console, Broadcast Audio Acquisition, High-Resolution Audio Interface, Digital Audio Instrument, Digital Speaker Processor.
Professional Audio Recording
The AK5385BVF fits two-channel professional recording front ends that require 24-bit digital audio capture and a sampling range extending to 216kHz. Its two-channel architecture supports simultaneous conversion of left- and right-channel signals, while the serial output can feed a digital audio processor or codec. According to the manufacturer datasheet, the Enhanced Dual Bit modulator architecture and 114dB signal-to-noise ratio are suited to high-end audio systems. The implementation must preserve the recommended analog input network and keep clock and digital traces isolated from sensitive audio paths to avoid degrading the converter’s noise performance.
推荐
Digital Mixing Console
The AK5385BVF is appropriate for a digital mixing console or multichannel stage where each converter pair handles two audio channels at high resolution. Its 24-bit conversion format, two-channel organization, and serial interface support economical digital routing into a mixing DSP. The 8kHz-to-216kHz range allows a console to support multiple working rates rather than restricting the design to conventional CD-rate audio. Because mixer boards combine many fast digital signals, placement and partitioning around the converter are critical to preserve a clean analog-to-digital transition.
推荐
Broadcast Audio Acquisition
The AK5385BVF can serve as the stereo capture converter in broadcast and production equipment requiring high-resolution serial audio output. Its two-channel architecture maps naturally to stereo program audio, while the 24-bit format and 216kHz maximum sampling capability support high-quality studio and mastering workflows. The device should be paired with a stable clock source and a compliant analog input network to maintain signal integrity. Short analog routing, careful grounding, and separation from processor clocks are particularly important in dense broadcast equipment where converter cards sit near high-speed digital systems.
推荐
High-Resolution Audio Interface
The AK5385BVF fits a high-resolution stereo interface where a 24-bit ADC is required for signal capture before digital gain, monitoring, or storage. Its serial data interface simplifies connection to an audio DSP, and the available sampling-rate span supports designs operating from 8kHz through 216kHz. The 28-pin VSOP package also enables a compact converter section on an audio interface PCB. Interface layout should minimize loop area around analog inputs, follow the recommended bypass network, and keep the master-clock and data traces away from the input pins to maintain signal integrity.
推荐
Digital Audio Instrument
The AK5385BVF can be used in digital measurement and musical instruments that capture stereo analog waveforms for display, processing, or recording. The 24-bit resolution supports fine amplitude representation, while the 8kHz-to-216kHz range accommodates both analysis-oriented and high-resolution audio workflows. A serial output allows captured data to be routed into an embedded processor without a parallel bus consuming numerous pins. The design must still use the manufacturer’s recommended input conditioning and clocking arrangement, since those details directly influence conversion accuracy and usable audio bandwidth.
推荐
Digital Speaker Processor
The AK5385BVF is suitable for digital speaker processors and active loudspeaker electronics that require a high-resolution stereo monitor input. The converter’s two channels can capture the relevant audio signals for filtering, limiting, or crossover processing before the digital output stage. Its Enhanced Dual Bit architecture and 24-bit format align with high-end audio conversion, while the serial interface supports efficient communication with a digital signal processor. In a loudspeaker controller, analog input routing should remain isolated from switching regulators and high-current output stages to prevent system noise from entering the conversion chain.
推荐
推荐产品汇总
工程参考数据: AK5385BVF ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | AK5385AVF | AK5385A |
|---|---|---|---|
| Package | 28-pin VSOP | 28-pin VSOP | 28-pin VSOP |
| Brand | Asahi Kasei Microdevices | Asahi Kasei Microdevices | Asahi Kasei Microdevices |
| Conversion Resolution | 24 bit | 24 bit | 24 bit |
| Channel Count | 2 channels | 2 channels | 2 channels |
| Data Output | Serial | Serial | Serial |
| Modulator Architecture | Enhanced Dual Bit | Enhanced Dual Bit | Enhanced Dual Bit |
关键差异点
- Higher confirmed maximum sampling rate than the identified AK5385A cross-reference (对比 AK5385A)
- Exact 28-pin VSOP ordering configuration (对比 AK5385AVF)
- Two-channel 24-bit conversion with Enhanced Dual Bit architecture (对比 AK5385A)
设计说明
Keep the AK5385BVF analog input traces short and route left- and right-channel inputs symmetrically to minimize channel-to-channel timing and amplitude differences. Place input biasing and filtering components close to their associated pins, and avoid routing them beneath digital clock or serial-data paths. The 28-pin VSOP footprint must be checked against the manufacturer’s mechanical drawing, including 1.27mm pitch and the exact lead geometry used by the selected ordering code.
Use the manufacturer’s recommended analog and digital supply bypass arrangement, with short connections from each capacitor to the intended power and ground pins. Keep analog and digital return currents separated until they reach a suitable common point, and avoid sharing narrow ground paths between the converter, clock source, and downstream processor. Supply limits and capacitor voltage ratings should be selected from the manufacturer’s electrical-characteristics and application sections.
Treat the master clock and serial output as potential sources of coupling into the analog input section. Route clock traces away from input nodes, provide a continuous ground reference beneath digital routes where appropriate, and avoid creating long shared return paths between the ADC and switching circuitry. The exact clock mode, permitted frequencies, and serial timing must be implemented from the AK5385B datasheet rather than inferred from the 8kHz-to-216kHz sampling-rate range.
Do not approve a replacement based only on the AK5385 family name. Confirm the exact suffix, package dimensions, pin names, analog input polarity, full-scale input range, clock requirements, supply voltages, serial data format, and control-signal timing. AK5385AVF and AK5385A are the identified alternatives, but each replacement decision requires a complete datasheet comparison and, for an existing PCB, a mechanical fit and pin-by-pin continuity review.
合规信息
Compliance status was not stated in the manufacturer or distributor information available for the AK5385BVF. Check the current manufacturer product declaration and applicable material-compliance documentation before production release.