AL1322 - IO-Link Master with EtherNet/IP, 8-Port IP67 | ifm
料号： AL1322 ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $980 | $980.00 |
| 10 | $940 | $9,400.00 |
| 100 | $900 | $90,000.00 |
| 500 | $870 | $435,000.00 |
| 1,000 | $850 | $850,000.00 |
AL1322 概述
An IO-Link master is a gateway device that bridges IO-Link point-to-point communication (per IEC 61131-9) with higher-level industrial fieldbuses such as EtherNet/IP, PROFINET, or EtherCAT. Positioned in the industrial communication hierarchy, IO-Link masters sit below PLCs and SCADA systems and above the sensor/actuator layer. The AL1322 specifically targets EtherNet/IP-based control systems, providing deterministic industrial Ethernet connectivity while exposing IO-Link's bidirectional diagnostics and digital process data.
Key features include support for eight IO-Link ports (B-port class on some channels for actuator auxiliary power), EtherNet/IP and MQTT JSON interfaces, and an IP67-rated housing for direct cabinet-free mounting in washdown zones. The dual-port Ethernet switch (DLR capability) supports ring redundancy, while the separate MQTT JSON interface enables cloud/edge analytics without disrupting the real-time control network. The unit operates on M12 power and uses M12 A-coded and D-coded connectors for Ethernet, simplifying field wiring.
Typical applications include factory automation cells requiring mixed sensor connectivity, machine building with retrofit of IO-Link devices onto legacy EtherNet/IP lines, automotive body-in-white welding cells, and food and beverage machinery where IP67 washdown capability is mandatory. The MQTT JSON interface enables predictive maintenance dashboards that consume process data independently of the PLC scan cycle.
When designing with the AL1322, ensure the EtherNet/IP scanner/PLC supports the EDS file revision shipped with the unit. For ring topologies, configure Device Level Ring (DLR) on the PLC side and verify beacon frame support. Power budgeting must account for actuator current on B-ports (up to 2 A per port typical).
直接替换替代料： AL1322 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： AL1322 （相同外形与封装尺寸） ——差异在于 Connector Type, Fieldbus Protocol, Manufacturer, Product Type.
快速对比工具——选择替代料号进行并排对比：
AL1326
✅ 直接替换📋 参考替代料（不在目录中）
AL1352
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
AL1342
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
BNI EIP-508-105-Z015
✅ 直接替换📋 参考替代料（不在目录中）
Siemens 6ES7194-1BN40-0AA0
✅ 直接替换📋 参考替代料（不在目录中）
SICK SIG200
✅ 直接替换📋 参考替代料（不在目录中）
AL1322 规格参数
| Product Type | IO-Link Master with EtherNet/IP Interface |
| Manufacturer | ifm efector |
| Number of IO-Link Ports | 8 (Class A and Class B ports) |
| Fieldbus Protocol | EtherNet/IP |
| Secondary Interface | MQTT JSON (separate from automation network) |
| Ethernet Ports | 2 x M12 D-coded (switch with DLR support) |
| Connector Type | M12x1 A-coded and D-coded |
| 电源电压 | 24 V DC (via M12 power connector) |
| Housing Protection Class | IP67 |
| Housing Material | Plastic, robust industrial grade |
| Mounting | Field-mountable (M4 mounting holes / through-holes) |
| Configuration Interface | Web server (Ethernet) / EtherNet/IP EDS |
| IO-Link Specification | IEC 61131-9 (IO-Link v1.1) |
| Status Indication | LED per port (link/activity/diagnostics) |
| Compliance | RoHS compliant (per manufacturer) |
AL1322 standard 引脚配置指南
AL1322（standard 封装）的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据： AL1322.
请参阅 数据手册 以查看完整引脚配置。
典型应用
AL1322 适用于 7 应用s: Automotive Body-in-White Welding Cell, Food and Beverage Packaging Line, Material Handling Conveyor Sortation, Robotic End-of-Arm Tooling (EOAT) Hub, Predictive Maintenance Edge Gateway, Semiconductor Fab Tool I/O Distribution, Water/Wastewater Treatment Plant.
Automotive Body-in-White Welding Cell
The AL1322 fits automotive welding cells where each robot needs dense IO-Link connectivity to position sensors, clamp-closure switches, and gripper actuators. Its IP67 housing mounts directly on the welding cell perimeter without cabinets, surviving coolant spray and weld spatter. Eight IO-Link ports per unit covers the typical I/O density of one welding gun (4-6 sensors plus 2 actuator valves), while EtherNet/IP scanning keeps cycle times under 10 ms. Unlike cabinet-mounted IO masters, the AL1322's field-mount form factor eliminates long M12 homerun cables back to the cabinet, reducing harness mass and EMC noise coupling on robot dresspacks. Designers should budget the auxiliary power on B-ports separately from the 24 V master supply, especially when driving valve banks that pull 1.5-2 A per channel.
推荐
Food and Beverage Packaging Line
In washdown food packaging lines, the AL1322's IP67 housing supports direct mounting above conveyor lines and inside hygienic zones without stainless enclosures, saving significant integration cost. Per the ifm datasheet, its Class A and Class B IO-Link ports accommodate a mix of temperature sensors (ifm TM), color/contrast markers (ifm O5), and pneumatic valve manifolds (ifm VE) on a single EtherNet/IP node, replacing what would otherwise require 3-4 separate junction blocks. The dedicated MQTT JSON interface publishes line OEE metrics to the cloud without burdening the PLC scan, enabling predictive changeover for SKU variability on snack-food lines. Use M12 stainless cordsets and ensure the housing is mounted in a way that avoids direct high-pressure wash jets, as IP67 is rated for immersion not high-pressure spray over time.
推荐
Material Handling Conveyor Sortation
Distribution-center conveyor sortation systems benefit from the AL1322's 8-port density to consolidate what would be multiple standalone block modules per zone. The dual Ethernet ports enable DLR ring topology across long aisles, so a single cable break does not stop the conveyor - critical for 24/7 parcel sort operations. The AL1322 connects both photoelectric fork sensors and motor starters via IO-Link actuators, allowing the PLC scan to read barcode reader triggers and motor status in one deterministic frame. MQTT-side analytics compute jammed-belt detection by correlating sensor stream with VFD status, alerting the maintenance crew before a stop. Cable management must preserve minimum bend radius for the M12 D-coded Ethernet cordsets to maintain 100 Mbit/s link integrity.
推荐
Robotic End-of-Arm Tooling (EOAT) Hub
Mounting an AL1322 at the robotic EOAT base provides 8 IO-Link channels for gripper fingers, vacuum switches, and workpiece-presence detectors. The EtherNet/IP DLR ring integrates this as a sub-node on the cell network, allowing the robot controller to drop and add the gripper quickly in multi-product cells. The MQTT interface exposes gripper-cycle analytics for OEE tracking at the production-management layer. Compared to discrete point-to-point wiring, the AL1322 reduces EOAT harness complexity significantly and supports hot-swap of failed sensors during a production break. Ensure the M12 cordsets use robot-rated drag-chain cable with strain relief at the gripper interface to survive continuous flexing.
推荐
Predictive Maintenance Edge Gateway
The AL1322's MQTT JSON interface is a key asset for predictive-maintenance deployments where vibration, temperature, and current sensors must stream to a time-series database. The separate IT network path isolates the analytics traffic from the control network, complying with Purdue Model Level 0-3 segmentation. Connect ifm O1D vibration sensors, ifm TA temperature probes, and SmartPlug power meters via IO-Link channels. Engineers should size the broker for the expected message rate (typically 1 Hz per sensor) and configure TLS to protect process data in transit. This architecture enables condition-based monitoring on legacy assets without retrofitting PLC programs.
推荐
Semiconductor Fab Tool I/O Distribution
In semiconductor tool integration, the AL1322 provides distributed IO-Link connectivity across vacuum chambers, gas panels, and slit-valve actuators. The IP67 housing survives cleanroom wipe-down protocols, and EtherNet/IP integrates with the tool's host PLC, while the MQTT feed delivers chamber-condition data to the factory's data historian. Eight ports per module matches typical tool I/O density (pneumatic switches, pressure sensors, leak detectors, door sensors). For vacuum-pressure applications, use ifm PN7 series pressure sensors on the Class B ports to provide both sensor and actuator power on one M12 run, simplifying cable routing through tool walls.
推荐
Water/Wastewater Treatment Plant
For municipal water treatment skids, the AL1322's IP67 housing tolerates outdoor moisture and the M12 connectors provide reliable connections resistant to UV and chemical exposure. IO-Link port density supports level sensors (ifm LMT), flow meters (ifm SI), and chemical-dosing pump drives on a single EtherNet/IP node per treatment basin. The MQTT interface publishes flow and chemistry data to SCADA historian and regulatory compliance dashboards, supporting automated reporting per local utility requirements. Mount the AL1322 in the sun-shielded side of equipment pads and use PUR-jacketed cordsets for chemical resistance around dosing lines. Verify operating temperature envelope against site conditions (verify against manufacturer's published range before deployment).
推荐
推荐产品汇总
工程参考数据： AL1322 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | AL1326 | BNI EIP-508-105-Z015 | SICK SIG200 | Siemens 6ES7194-1BN40-0AA0 |
|---|---|---|---|---|---|
| Brand | ifm efector | ifm | Balluff | SICK AG | Siemens |
| Package / Form Factor | IP67 field-mount, M12 connectors | IP67 field-mount, M12 connectors | IP67 field-mount, M12 connectors | IP67 field-mount, M12 connectors | IP67 ET 200AL module |
| Primary Protocol | EtherNet/IP | EtherNet/IP | EtherNet/IP | EtherNet/IP (multi-protocol) | PROFINET |
| Secondary Interface (IT/Cloud) | MQTT JSON | MQTT JSON | Web server / OPC UA | REST API / MQTT | Web server |
| Protection Class | IP67 | IP67 | IP67 | IP67 | IP65/IP67 |
| Power Supply | 24 V DC via M12 | 24 V DC via M12 | 24 V DC via M12 | 24 V DC via M12 | 24 V DC via M12 |
关键差异点
- Separate MQTT JSON interface for IT/cloud alongside EtherNet/IP for control （对比 SICK SIG200)
- Single-vendor sensor ecosystem (ifm IO-Link sensors plus master) （对比 Balluff BNI EIP-508-105-Z015)
- Compact 8-port density in single IP67 housing without sub-modules （对比 Siemens 6ES7194-1BN40-0AA0)
设计说明
Estimated: With 8 ports fully populated and B-ports driving valve banks at 1.5 A each, total master current draw can reach 13-15 A at 24 V. Per the ifm datasheet, use an adequately sized 24 V PELV/SELV supply and verify conductor gauge for the M12 power lead. For ring-topology installations, do not daisy-chain power from one AL1322 to the next; each should receive a parallel feed from the power distribution box to localize fault current.
Mount the AL1322 on a flat metal surface or bracket to leverage thermal conduction away from the housing. The IP67 rating assumes vertical mounting with connectors pointing downward or sideways; avoid mounting with M12 ports facing up, as water can pool and degrade seal performance over years. Maintain at least 50 mm clearance between adjacent units to allow heat dissipation and connector mating room, and document the M12 connector torque (per IEC 61076-2-101) at panel-build time.
Do not assume the alternative article AL1326 is functionally identical to AL1322 - ifm explicitly states technical data may differ. Verify port count, B-port availability, and EDS revision against your PLC program. For EtherNet/IP DLR, ensure the PLC is the active ring supervisor and that beacon frames are enabled on both ports of the AL1322; disabled beacon frames will force the ring into linear mode and break redundancy. For MQTT, configure TLS certificates and broker credentials before commissioning to avoid exposing process data in cleartext.
M12 D-coded Ethernet cables must be rated Cat 5e or higher and conform to IEC 61076-2-101 to maintain 100 Mbit/s link integrity. Per the manufacturer datasheet, cordset bend radius must be >= 5x cable diameter; robot dresspack installations should use drag-chain-rated PUR-jacketed cable. Validate any surge/lightning protection at cabinet ingress points when the AL1322 is installed outdoors - DLR ring nodes are vulnerable to induced surges from nearby VFD motors or welding equipment.
合规信息
RoHS/REACH compliance status per ifm product page. IP67 rating is a protection class (IEC 60529), not an automotive grade - the part is intended for industrial automation, not road-vehicle electronics. AEC-Q100 not applicable.