Microchip Technology

AT90CAN128-15MZ - 15MHz 128KB AVR CAN MCU | Microchip

料号: AT90CAN128-15MZ ✓ 量产中
64-QFN (9x9 mm) Package 15 MHz Speed ISP flash Memory
最小起订量: 1 |

AT90CAN128-15MZ 概述

The Microchip Technology AT90CAN128-15MZ is an 8-bit AVR RISC microcontroller rated at 15 MHz, with 128 KB of ISP flash memory and an integrated CAN controller, housed in a 64-QFN (9x9) package with an exposed pad. It provides 4 KB of SRAM, 4 KB of EEPROM, 53 general-purpose I/O lines, and 32 general-purpose working registers. The device also includes real-time counter, timer/counter, USART, and SPI resources for embedded communications and control designs.

An 8-bit microcontroller is a compact programmable controller that executes embedded firmware while integrating memory, digital I/O, communications peripherals, and timing functions on one semiconductor die. The AVR RISC architecture belongs to the broader hierarchy of microcontroller, embedded processor, and semiconductor devices. AT90CAN128 devices combine that general-purpose processing role with a dedicated CAN interface, allowing one controller to supervise distributed automotive, industrial, and instrumentation networks without a separate CAN controller.

The AT90CAN128 family combines 128 KB of in-system programmable flash with 4 KB of EEPROM for nonvolatile parameters and 4 KB of SRAM for working data. Its CAN controller supports CAN V2.0A and CAN V2.0B operation, while 53 I/O lines provide substantial connectivity for sensors, actuators, communications transceivers, and status indicators. The 15 MHz grade represented by AT90CAN128-15MZ is intended for applications requiring a 15 MHz clock rather than the 16 MHz AT90CAN128-16 variants.

The 64-QFN package uses a 9 mm by 9 mm body and an exposed thermal pad. That pad is important because it provides a direct path for heat transfer into the PCB rather than relying only on copper traces. Although the device includes substantial on-chip resources, package-pin multiplexing and external components determine how many I/O functions can be used simultaneously. Firmware, peripheral assignments, and board-level CAN transceiver selection remain central to a successful implementation.

Typical applications include CAN-based automotive body electronics, industrial machine controllers, vehicle diagnostics, building automation nodes, sensor gateways, and CAN-connected test equipment. The combination of 128 KB flash, integrated CAN, multiple serial interfaces, and a 64-pin package makes AT90CAN128 particularly useful where local control and reliable network communication must share one microcontroller.

PCB implementation should preserve the manufacturer's recommended power, decoupling, clock, programming, and exposed-pad arrangements. A CAN bus also requires a suitable 3.3 V or 5 V CAN transceiver, termination only at the two physical ends of the bus, and a carefully controlled common-mode environment. Firmware should verify reset behavior and bus error handling before enabling safety-relevant functions.

This page combines the manufacturer family specifications with practical application guidance, drop-in alternatives, package considerations, and design notes. It also distinguishes the 15 MHz AT90CAN128-15MZ from closely related 16 MHz and temperature-grade variants, helping engineers determine whether a board can reuse the same 64-QFN footprint and software configuration.

直接替换替代料: AT90CAN128-15MZ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: AT90CAN128-15MZ (相同外形与封装尺寸) ——差异在于 Package, Mounting Type, Architecture, CAN Controller, Maximum Clock Frequency.

Microchip Technology
Package: 64-pin TQFP, 14 mm x 14 mm
Mounting Type: Surface mount
Architecture: AVR enhanced RISC
对比 AT90CAN128-15MZ →
Microchip Technology
Package: 64-pin QFN (9 mm x 9 mm)
Mounting Type: Surface Mount
CAN Controller: CAN 2.0A / 2.0B compliant
对比 AT90CAN128-15MZ →

AT90CAN128-16MU

✅ 直接替换
Microchip Technology
📦 64-QFN (9x9 mm)
AVR 8-bit RISC · 128 KB (128K x 8) · 4 KB · 4 KB · 16 MHz · 4.5 V to 5.5 V · 53 · 32

联系询价

查看数据手册 →

AT90CAN128-16AU

✅ 直接替换
Microchip Technology
📦 64-QFN (9x9 mm)
8-bit AVR RISC microcontroller with CAN controller · 16 MHz · 128 KB (128K x 8) · 4 KB · 4 KB · 53 lines · 32 registers · CAN 2.0A and CAN 2.0B compliant

联系询价

查看数据手册 →

AT90CAN128-16AZ

✅ 直接替换
📦 64-QFN (9x9 mm)
Maximum clock increases from 15 MHz to 16 MHz, a 6.7% difference, with the suffix-specific temperature and qualification markings requiring verification.

📋 参考替代料(不在目录中)

AT90CAN128-15MU

✅ 直接替换 ⚠️ 规格未核验
📦 64-QFN (9x9 mm)
Clock remains 15 MHz; the difference is the ordering suffix and associated grade or qualification option.

📋 参考替代料(不在目录中)

AT90CAN128-15AU

✅ 直接替换 ⚠️ 规格未核验
📦 64-QFN (9x9 mm)
Clock remains 15 MHz; the difference is the ordering suffix and associated grade or qualification option.

📋 参考替代料(不在目录中)

AT90CAN128-15MZ 最大额定值与电气特性

Microcontroller Type 8-bit RISC microcontroller
Architecture AVR RISC
最大时钟频率 15 MHz
Program Memory Type ISP flash
Program Memory Size 128 KB
EEPROM Size 4 KB
SRAM Size 4 KB
General-Purpose I/O Lines 53 lines
General-Purpose Working Registers 32 registers
CAN Controller Version CAN V2.0A and CAN V2.0B
封装 64-QFN (9x9 mm)
Package Type 64-VFQFN with exposed pad
Terminal Count 64 terminals
安装类型 No-lead surface mount
Temperature Grade Automotive grade
USART Count 2 serial interfaces
Timer and Counter Resources Real-time counter and 4 flexible timer/counters

AT90CAN128-15MZ 64-vfqfn with exposed pad 引脚配置指南

AT90CAN128-15MZ(64-vfqfn with exposed pad 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

AT90CAN128-15MZ 的 64-vfqfn with exposed pad 封装引脚图

暂无详细引脚数据: AT90CAN128-15MZ.

请参阅 数据手册 以查看完整引脚配置。

典型应用

AT90CAN128-15MZ 适用于 6 应用s: Automotive Body Control Module, Vehicle Diagnostic Interface, Industrial CAN Sensor Gateway, Building Automation Controller, CAN-Connected Test Equipment, Robotics and Motion Control Node.

🚗

Automotive Body Control Module

AT90CAN128-15MZ fits an automotive body-control node that must process local sensor inputs while communicating on a CAN network. Its 8-bit AVR core runs at 15 MHz, while 53 general-purpose I/O lines support switches, lamps, actuators, and diagnostic signaling. The integrated CAN V2.0A/V2.0B controller reduces system complexity by avoiding a separate communication controller. With 128 KB of ISP flash, 4 KB of EEPROM, and 4 KB of SRAM, the device can retain calibration data and execute body-control software, although actual memory use and automotive qualification must be verified for the vehicle program.

🚗

Vehicle Diagnostic Interface

The AT90CAN128-15MZ is appropriate for a gateway or diagnostic interface that exchanges requests and status data over CAN while coordinating local I/O. The CAN V2.0A/V2.0B controller supports the bus protocol, and the two USARTs provide additional channels for service equipment or another embedded controller. Its 15 MHz AVR core and 128 KB program flash leave room for protocol handling, diagnostics, and application logic. Designers should confirm baud-rate tolerance, error recovery, bus termination, and transceiver selection against the vehicle network specification.

🏭

Industrial CAN Sensor Gateway

AT90CAN128-15MZ can consolidate sensors and actuators on a CAN segment in an industrial machine or production cell. Its 53 I/O lines accommodate digital inputs, outputs, and status signals, while the integrated CAN controller manages network communication without a separate protocol IC. The 15 MHz processing rate supports real-time control, and the four timer/counters, real-time timer, two USARTs, and SPI interface broaden the gateway's connectivity options. For harsh installations, verify the exact operating-temperature, EMC, isolation, surge, and grounding requirements rather than relying only on the automotive-grade suffix.

🏭

Building Automation Controller

The AT90CAN128-15MZ suits a building-network node that coordinates lighting, HVAC actuators, sensors, and service interfaces over CAN. Its 128 KB flash can hold communication and control firmware, while 4 KB of EEPROM is useful for configuration and operating counters. The 53 I/O lines offer broad discrete connectivity, and the real-time counter and timer/counters support periodic scheduling. A practical implementation should isolate field wiring, select a CAN transceiver matched to the bus voltage and topology, and validate brownout behavior so communication continues predictably during power transitions.

🔧

CAN-Connected Test Equipment

AT90CAN128-15MZ can serve as the embedded controller in a compact automated test system that receives commands and returns measurements over CAN. Its 15 MHz AVR core, four flexible timer/counters, and real-time counter support deterministic sequencing, while 53 I/O lines can operate relays, indicators, and measurement fixtures. The two USARTs and SPI interface allow connection to external converters or sensors. Designers should budget the 4 KB SRAM carefully, use the 128 KB flash for firmware rather than large captured data sets, and follow the manufacturer interface and decoupling guidance.

🤖

Robotics and Motion Control Node

The AT90CAN128-15MZ is well suited to a distributed robot controller that accepts commands over CAN and manages local sensors and actuators. Its timer/counters support timing-sensitive control functions, while 53 I/O lines can interface limit switches, encoders, indicators, and driver command signals. The CAN controller permits synchronized coordination with other robot modules, and 128 KB of flash accommodates layered control software. The design should account for motor-generated electrical noise, isolated communication needs, and the difference between control-loop timing and CAN message latency when selecting oscillators and external protection.

推荐产品汇总

AT90CAN128-16MU Microchip Technology 用于: Automotive Body Control Module, Vehicle Diagnostic Interface, Industrial CAN Sensor Gateway, CAN-Connected Test Equipment, Robotics and Motion Control Node AT90CAN128-16AU Microchip Technology 用于: Automotive Body Control Module, Building Automation Controller AT90CAN128-15AU Same-clock 64-QFN family option 用于: Vehicle Diagnostic Interface, CAN-Connected Test Equipment AT90CAN128-16AZ Suffix-specific 64-QFN family alternative 用于: Industrial CAN Sensor Gateway, Robotics and Motion Control Node AT90CAN128-15MU Same-clock 64-QFN family alternative 用于: Building Automation Controller
What is the AT90CAN128-15MZ?
The AT90CAN128-15MZ is a Microchip Technology 8-bit AVR RISC microcontroller with a 15 MHz maximum clock, 128 KB of ISP flash, 4 KB of EEPROM, 4 KB of SRAM, and an integrated CAN controller. According to the Microchip AT90CAN128 product page, the family provides 53 general-purpose I/O lines, 32 working registers, two USARTs, four flexible timer/counters, and a real-time counter. The device is packaged in a 64-QFN (9x9 mm) format with an exposed pad.
What are the key specifications of AT90CAN128-15MZ that engineers should know?
The AT90CAN128-15MZ combines a 15 MHz AVR RISC core with 128 KB of ISP flash, 4 KB of EEPROM, 4 KB of SRAM, and 53 general-purpose I/O lines. Its integrated CAN controller complies with CAN V2.0A and V2.0B. The Microchip AT90CAN128 product page also identifies 32 general-purpose working registers, two USARTs, a real-time counter, and four flexible timer/counters. The 64-QFN package has 64 terminals and an exposed thermal pad.
Where can I download the AT90CAN128-15MZ datasheet PDF?
The official AT90CAN128-15MZ documentation starts at the Microchip AT90CAN128 product page, which links to the manufacturer datasheet and supporting documents. The device datasheet is also indexed through Octopart's AT90CAN128-15MZ document page. Use the Microchip link for the authoritative pin descriptions, electrical characteristics, package drawings, and programming information because distributor and aggregator copies can lag the current manufacturer document.
Where can I find the AT90CAN128 pinout for the 64-QFN package?
The AT90CAN128 pinout for the 64-QFN (9x9 mm) package is defined in the pin-description section of the manufacturer datasheet and the package drawing. The AT90CAN128-15MZ has 64 terminals and an exposed pad, so PCB symbol and footprint work should account for both the numbered perimeter pins and the exposed thermal pad. Use the manufacturer's pin-description table when assigning multiplexing, power, ground, programming, reset, and CAN functions.
Is the AT90CAN128-15MZ the same as AT90CAN128-16MU?
No. Both devices are AT90CAN128-family 8-bit AVR microcontrollers with 128 KB of flash, 4 KB of EEPROM, 4 KB of SRAM, CAN V2.0A/V2.0B support, and a 64-QFN footprint, but their maximum clock ratings differ. AT90CAN128-15MZ operates at 15 MHz, while AT90CAN128-16MU is rated at 16 MHz, a 6.7% increase. Existing firmware may still require clock-related timing review before substitution.
What is the best drop-in replacement for AT90CAN128-15MZ?
AT90CAN128-16MU is the closest identified 64-QFN drop-in candidate because it retains the 128 KB flash, 4 KB EEPROM, 4 KB SRAM, CAN controller, and 53 I/O lines while increasing the maximum clock from 15 MHz to 16 MHz. The 6.7% clock increase must be checked against timing margins. AT90CAN128-16AU and AT90CAN128-16AZ are additional 64-QFN family options, subject to their specific temperature-grade markings.
What can replace AT90CAN128-15MZ without changing the PCB footprint?
The identified same-footprint replacements are AT90CAN128-16MU, AT90CAN128-16AU, AT90CAN128-16AZ, AT90CAN128-15MU, and AT90CAN128-15AU in the 64-QFN family. The 16 MHz options raise the maximum clock by 6.7% relative to the 15 MHz target, while the 15 MHz options retain the target clock. Pin assignment, exposed-pad layout, memory organization, CAN implementation, and the exact temperature-grade suffix must still be checked against the manufacturer documentation before production substitution.
When should I choose AT90CAN128-15MZ over AT90CAN128-16MU?
Choose AT90CAN128-15MZ when a design specifically calls for the 15 MHz grade or when firmware and timing validation are tied to that clock. AT90CAN128-16MU offers the same 128 KB flash, 4 KB EEPROM, 4 KB SRAM, CAN capability, and 64-QFN footprint with a 16 MHz maximum clock. The 16 MHz part may simplify migration to a faster supported configuration, but the 6.7% clock increase does not eliminate the need to review baud-rate generation, timer periods, delays, and timing-critical loops.
Is AT90CAN128-15MZ suitable for CAN-based automotive electronics?
The AT90CAN128-15MZ is suitable for CAN-connected automotive electronics when its specified electrical limits, temperature grade, and qualification status meet the vehicle program. The part is identified as automotive grade and provides a CAN V2.0A/V2.0B controller, 53 I/O lines, 128 KB flash, and a 64-QFN package. The controller still requires an external CAN transceiver, and the AEC-Q100 qualification status must be confirmed from the exact part's official documentation.
What peripherals are integrated into AT90CAN128-15MZ?
The AT90CAN128-15MZ integrates an 8-bit AVR RISC core, 128 KB of ISP flash, 4 KB of EEPROM, 4 KB of SRAM, a CAN V2.0A/V2.0B controller, two USARTs, and four flexible timer/counters with compare modes and PWM. It also includes a real-time counter, 53 general-purpose I/O lines, and 32 general-purpose working registers. These resources support network management, sensor acquisition, actuator timing, serial communication, and embedded control without requiring separate peripheral ICs.
How much memory does AT90CAN128-15MZ have?
The AT90CAN128-15MZ has 128 KB of ISP program flash, 4 KB of EEPROM, and 4 KB of SRAM. According to the Microchip AT90CAN128 product page, the memory organization supports firmware storage, nonvolatile configuration or calibration data, and working memory. The 128 KB flash is suitable for communication stacks and application firmware, but the 4 KB SRAM and 4 KB EEPROM should be checked carefully against buffering, logging, and parameter-retention requirements.
Does AT90CAN128-15MZ need an external CAN transceiver?
Yes. AT90CAN128-15MZ contains a CAN controller, not the analog CAN transceiver required to connect directly to a physical CAN bus. The microcontroller's CAN TX and RX signals must connect through a suitable 3.3 V or 5 V CAN transceiver, with bus protection, common-mode considerations, and termination handled by the board design. The transceiver also determines the logic levels and electrical interface used between the microcontroller and the CAN bus.
Where can I buy AT90CAN128-15MZ and check its availability?
Use the Request a Quote form on this page to request the current AT90CAN128-15MZ price, stock status, quantity, and lead time. One listing reports 4,432 pieces available and shows an estimated delivery window of July 10 through July 15, but availability and timing can change without notice. The form allows buyers to request an exact package suffix and current commercial commitment without relying on a stale catalog figure.
How is the AT90CAN128-15MZ programmed?
AT90CAN128-15MZ supports in-system programming for its 128 KB ISP flash. The manufacturer AT90CAN128 documentation contains the programming interfaces, fuse and lock-bit information, and device-specific programming guidance. A production design should reserve the required programming connector or test pads, provide stable power during programming, and protect the programming interface from unwanted external access. Use the current Microchip programming tool and device support files for AT90CAN128-15MZ.
What is the difference between AT90CAN128-15MZ and AT90CAN64-15MZ?
The principal documented difference is program flash capacity: AT90CAN128-15MZ provides 128 KB, while AT90CAN64-15MZ provides 64 KB, a 50% reduction for the AT90CAN64 part. Both belong to the 8-bit AVR RISC CAN-controller family and appear in 64-pin QFN-related comparisons. A replacement also requires checking SRAM, EEPROM, I/O availability, package drawing, pin multiplexing, and firmware memory assumptions because the device names alone do not establish full interchangeability.

工程参考数据: AT90CAN128-15MZ ——对比、设计指导和合规信息。

选型指南

Choose AT90CAN128-15MZ when the design requires the exact 15 MHz AT90CAN128 grade, 128 KB of ISP flash, 4 KB of EEPROM, 4 KB of SRAM, 53 I/O lines, and an integrated CAN V2.0A/V2.0B controller in a 64-QFN footprint. AT90CAN128-16MU, -16AU, and -16AZ are practical alternatives when a 16 MHz maximum clock is acceptable, but their 6.7% higher clock requires timing review and their suffix-specific grades must be checked. AT90CAN128-15MU and -15AU preserve the 15 MHz clock and may suit different qualification or commercial requirements. AT90CAN64-15MZ is not a full functional substitute because its 64 KB flash is 50% smaller. For every alternative, verify the package drawing, exposed-pad land pattern, pin multiplexing, operating limits, automotive qualification, and programming requirements against the exact manufacturer suffix before production release.

与替代料对比

参数 本产品 AT90CAN128-16MU AT90CAN128-16AU AT90CAN128-16AZ AT90CAN128-15MU AT90CAN128-15AU
Manufacturer Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 64-QFN (9x9 mm) 64-QFN (9x9 mm) - same 64-QFN (9x9 mm) - same 64-QFN (9x9 mm) - same 64-QFN (9x9 mm) - same 64-QFN (9x9 mm) - same
Maximum Clock Frequency 15 MHz 16 MHz 16 MHz 16 MHz 15 MHz 15 MHz
Program Flash 128 KB 128 KB 128 KB 128 KB 128 KB 128 KB
EEPROM 4 KB 4 KB 4 KB 4 KB 4 KB 4 KB
SRAM 4 KB 4 KB 4 KB 4 KB 4 KB 4 KB
CAN Controller CAN V2.0A/V2.0B CAN V2.0A/V2.0B CAN V2.0A/V2.0B CAN V2.0A/V2.0B CAN V2.0A/V2.0B CAN V2.0A/V2.0B
General-Purpose I/O 53 lines 53 lines 53 lines 53 lines 53 lines 53 lines
Terminal Count 64 terminals 64 terminals 64 terminals 64 terminals 64 terminals 64 terminals
Suffix-Specific Grade -15MZ automotive-grade ordering option -16MU grade designation -16AU grade designation -16AZ grade designation -15MU grade designation -15AU grade designation

关键差异点

  • Exact 15 MHz AT90CAN128 configuration (对比 AT90CAN128-16MU)
  • Full AT90CAN128 memory and I/O resources (对比 AT90CAN64-15MZ)
  • Integrated CAN V2.0A/V2.0B controller (对比 ATMEGA128A-MUR)

设计说明

Route the 64-QFN exposed pad onto a thermal and electrical land using the manufacturer's package drawing rather than treating it as an unspecified center pad. Keep power and ground connections short, place local decoupling capacitors at the relevant supply pins, and preserve the recommended via pattern for thermal performance. Confirm the PCB symbol against the official pin-description table before release because the exposed pad and numbered perimeter pins must be distinguished.

A CAN controller requires a physical-layer transceiver, so connect the AT90CAN128-15MZ CAN TX and RX pins to a suitably rated transceiver rather than directly to a bus. Use the transceiver's recommended logic levels and provide common-mode and surge protection appropriate to the installation. Terminate the bus at the two physical endpoints only, and keep the CAN route away from switching nodes and noisy motor return paths to reduce susceptibility to differential interference.

Do not assume that any same-package AT90CAN128 suffix is automatically interchangeable. Compare clock rating, temperature range, qualification markings, exposed-pad implementation, pin multiplexing, and reset or programming behavior. Moving from the 15 MHz target to a 16 MHz option changes the clock by 6.7%, so review baud-rate generation, timer constants, delay loops, and communication timing before approving the substitution.

Design the supply network for the exact operating-voltage range and current limits listed in the manufacturer datasheet, and include bulk and high-frequency decoupling near the device. Because this is a microcontroller rather than a power semiconductor, no safe-operating-area chart applies. Validate brownout, reset, and power-sequencing behavior with the CAN transceiver and external loads because unstable rails can appear as communication faults rather than obvious processor failures.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The component is identified as automotive grade, but exact RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 qualifications require confirmation from the exact Microchip ordering code.

相关搜索

at90can128 datasheet at90can128 pinout at90can128 16au datasheet at90can128 programming at90can128 development board at90can128 pdf AT90CAN128-15MZ datasheet AT90CAN128-15MZ pinout AT90CAN128-15MZ 64-QFN footprint AT90CAN128-15MZ CAN controller AT90CAN128-15MZ replacement AT90CAN128-15MZ vs AT90CAN128-16MU AT90CAN128-15MZ application circuit AT90CAN128-15MZ price AT90CAN128-15MZ stock

相关元器件 & 术语

Microchip Technology AT90CAN128-15MZ AT90CAN128 AT90CAN128-16MU AT90CAN128-16AU AT90CAN128-16AZ AT90CAN128-15MU AT90CAN128-15AU AT90CAN64-15MZ ATMEGA128A-MUR AVR RISC architecture 8-bit microcontroller embedded microcontroller semiconductor CAN controller CAN V2.0A CAN V2.0B In-System Programming ISP flash memory EEPROM SRAM 64-QFN VQFN family surface-mount device exposed pad general-purpose I/O real-time counter timer/counter USART SPI automotive electronics industrial automation CAN transceiver RoHS REACH AEC-Q100
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情