AT91FR40162-CI - 75MHz ARM7 MCU | Microchip Technology
料号: AT91FR40162-CI ✗ 停产AT91FR40162-CI 概述
An ARM7 microcontroller is a 32-bit reduced-instruction-set-computing core that can execute a compact 16-bit Thumb instruction set while retaining the programming model of a 32-bit processor. Within the AT91 product hierarchy, the AT91FR40162 combines an embedded processor core with Flash, SRAM, communication peripherals, timers, interrupt control, and external memory interfaces in one integrated circuit. This integration makes it part of the broader embedded-controller and embedded-processing semiconductor category.
The device provides 2 MB of Flash for firmware and 256 KB of SRAM for working memory. Its two USART channels support serial peripheral applications, while the three-channel timer/counter supports periodic timing, event counting, and industrial control functions. The ARM7TDMI core operates at 75 MHz and includes an ICE port on dedicated pins, providing a direct target-debug connection without requiring a separate external debug interface adapter.
The External Bus Interface allows additional memory or peripheral devices to be connected when the internal resources are insufficient. This architecture is particularly useful in space-constrained embedded systems that need substantial nonvolatile program storage and multiple serial or timing functions without the area required by several discrete components. The 121-ball BGA also supports compact board layouts, although its fine ball pitch requires careful escape routing, inspection, and assembly-process control.
Typical uses include industrial controllers, serial gateways, embedded data-acquisition systems, networking equipment, automotive electronics, and compact control modules. Two USARTs can connect sensors or communication transceivers, the three-channel timer/counter can coordinate system events, and the external bus can expand memory or peripheral capacity. The combination of 75 MHz processing, 2 MB Flash, and 256 KB SRAM supports moderately complex control firmware while preserving a deterministic embedded footprint.
Board design should prioritize BGA layout quality and bank-aware signal routing. Use the manufacturer pin-description and recommended-layout material when assigning ball positions, and provide stable decoupling close to each supply ball. Firmware development should account for the ARM7TDMI memory map, interrupt priorities, peripheral addressing, and the three-channel timer/counter configuration. Confirm that the selected board library, linker configuration, and development toolchain support the AT91FR40162 device and its 121-ball package.
This page consolidates the exact architecture, memory, clock, peripheral, and package characteristics with practical design guidance for industrial control, serial communications, embedded networking, automotive electronics, and data-acquisition designs. It also distinguishes verified same-family drop-in options from unsupported cross-package or functionally similar substitutes.
直接替换替代料: AT91FR40162-CI ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: AT91FR40162-CI (相同外形与封装尺寸) ——差异在于 External Bus Interface, Mounting Type, Package, Watchdog Timer.
AT91FR40162
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
AT91FR40162-CU
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
AT91FR40162-AU
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
AT91FR40162-CI 最大额定值与电气特性
| Processor Core | ARM7TDMI |
| Architecture | 16/32-bit |
| 最大时钟频率 | 75 MHz |
| Embedded Flash Memory | 2 MB |
| Flash Organization | 1M x 16 |
| On-Chip SRAM | 256 KB |
| Instruction Set | 16-bit Thumb instruction set |
| USART Count | 2 |
| Timer/Counter Channels | 3 |
| Watchdog Timer | 1 |
| External Bus Interface | 1 |
| Debug Interface | Embedded ICE port |
| 封装 | 121-ball BGA |
| Package Dimensions | 10 x 10 mm |
| 安装类型 | Surface-mount BGA |
AT91FR40162-CI 10 x 10 mm 引脚配置指南
AT91FR40162-CI(10 x 10 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: AT91FR40162-CI.
请参阅 数据手册 以查看完整引脚配置。
典型应用
AT91FR40162-CI 适用于 6 应用s: Industrial Control Modules, Serial Communication Gateways, Embedded Data Acquisition, Automotive Telematics Modules, Compact Networking Equipment, Battery-Powered Sensor Hubs.
Industrial Control Modules
The AT91FR40162-CI fits compact industrial controllers that require deterministic timing, serial connectivity, and substantial embedded program storage. Its 75 MHz ARM7TDMI core can execute control and communications tasks, while 2 MB of Flash accommodates application firmware, configuration data, and field-upgrade logic. The two USARTs can connect local sensors, operator terminals, or service interfaces, and the three-channel timer/counter supports periodic sampling and event timing. The watchdog timer adds a useful recovery mechanism for unattended equipment. Its 121-ball 10 x 10 mm BGA reduces board area compared with a discrete controller, although careful escape routing and assembly inspection are essential.
推荐
Serial Communication Gateways
The AT91FR40162-CI is suitable for embedded serial gateways because it combines two hardware USARTs with 75 MHz processing and 256 KB of SRAM. Firmware can frame and validate data arriving from two physical links, execute protocol conversion, and maintain short receive buffers without continuous external-memory access. The embedded ICE port supports development and field diagnostics, while the watchdog timer helps recover the gateway after a lockup. A 121-ball BGA also permits a compact controller board for DIN-rail or edge-mounted equipment. System designers should match the two USART electrical levels to their transceivers and validate baud-rate tolerance, flow control, and isolation requirements.
推荐
Embedded Data Acquisition
The AT91FR40162-CI can serve as the control core of an embedded data-acquisition system that combines sensor conditioning with local processing. Its three-channel timer/counter can establish sampling intervals or count external events, while the two USARTs can receive commands and transmit processed records. The 256 KB SRAM provides working space for buffering, and the 2 MB Flash can retain firmware, calibration tables, and configuration parameters. For a new 75 MHz control platform, the External Bus Interface may also support additional memory or peripherals. Designers should account for analog accuracy, sensor settling time, data-transfer latency, and watchdog timing independently of the microcontroller's digital processing capability.
推荐
Automotive Telematics Modules
The AT91FR40162-CI can be evaluated for compact automotive telematics and control modules that need local flash, serial links, and periodic event handling. The 75 MHz ARM7TDMI core supports protocol processing, while 256 KB of SRAM accommodates working buffers and 2 MB of Flash supports embedded application code. The two USARTs may serve diagnostic or external-device links, and the three timer channels can coordinate periodic messaging. Automotive deployment requires confirmation of the exact orderable suffix, temperature grade, automotive qualification, power characteristics, and hardware qualification requirements from the manufacturer. The same-family suffix variations must not be treated as automotive-qualified without documentation.
推荐
Compact Networking Equipment
The AT91FR40162-CI is applicable to compact networking equipment that requires a local control processor, protocol storage, and modest local connectivity. The 2 MB Flash can hold networking firmware and configuration data, while 256 KB of SRAM supports packet buffers and protocol state. The External Bus Interface offers a path to additional memory or interface logic when system requirements exceed the integrated resources, and the embedded ICE port provides a practical development and diagnostic route. The 121-ball BGA helps limit board area in compact access-point, interface, or protocol-conversion products. Designers should analyze worst-case Ethernet or serial traffic, interrupt latency, external-bus timing, and thermal performance rather than treating CPU frequency alone as a complete network-capacity metric.
推荐
Battery-Powered Sensor Hubs
The AT91FR40162-CI can support a compact sensor-hub controller when the design benefits from 75 MHz processing, 2 MB of firmware storage, and the manufacturer's advanced power-saving features. Two USARTs can connect local sensing or communication modules, while the three-channel timer/counter can handle periodic sampling and wake timing. The 256 KB SRAM reduces traffic to external memory during short active intervals, although the complete system power depends on sensor current, radio activity, leakage, and regulator efficiency. Firmware should disable unused peripherals, gate external loads, and use the watchdog carefully around sleep transitions. Production validation must include current measurements in every operating state and the full environmental range.
推荐
推荐产品汇总
工程参考数据: AT91FR40162-CI ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | AT91FR40162 | AT91FR40162-CU | AT91FR40162-AU |
|---|---|---|---|---|
| Package | 121-ball BGA | 121-ball BGA | 121-ball BGA | 121-ball BGA |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Processor Core | ARM7TDMI | ARM7TDMI | ARM7TDMI | ARM7TDMI |
| Maximum Clock Frequency | 75 MHz | 75 MHz | 75 MHz | 75 MHz |
| Embedded Flash Memory | 2 MB | 2 MB | 2 MB | 2 MB |
| On-Chip SRAM | 256 KB | 256 KB | 256 KB | 256 KB |
| Architecture | 16/32-bit | 16/32-bit | 16/32-bit | 16/32-bit |
| USART Count | 2 | 2 | 2 | 2 |
| Timer/Counter Channels | 3 | 3 | 3 | 3 |
| External Bus Interface | Present | Present | Present | Present |
| Order-Code Qualification | -CI | No suffix shown | -CU suffix | -AU suffix |
关键差异点
- Substantial embedded memory for the ARM7 control platform (对比 AT91FR40162)
- Integrated communication and timing resources (对比 AT91FR40162-CU)
- Compact 75 MHz embedded processing footprint (对比 AT91FR40162-AU)
设计说明
Implement the AT91FR40162-CI as a 121-ball BGA using the manufacturer-recommended land pattern and ball-numbering orientation. The 10 x 10 mm package requires layer-routing capacity beneath the device and careful escape routing for signals such as the two USART channels, three timer channels, and ICE port. Confirm the exact ball assignments in the manufacturer pin-description table before assigning signals. PCB assembly should use a process qualified for the device's ball pitch and include appropriate inspection for hidden solder joints.
Separate the core and I/O supply requirements into the power-tree design only after reading the manufacturer electrical-characteristics table. Provide short, low-impedance paths from the board's supply planes to the 121-ball package and place local high-frequency bypass capacitance close to the relevant power balls. Do not assume that a nominal 75 MHz operating point alone defines safe voltage limits. Validate startup, brownout, transient response, and current margin at the highest expected clock and peripheral load.
Avoid selecting a family member solely because its base number matches. The AT91FR40162, AT91FR40162-CU, and AT91FR40162-AU order codes require confirmation of suffix-specific temperature, qualification, and packing characteristics before substitution. Also verify that the linker script, startup code, debugger configuration, and operating-system port target the exact device. A memory-size mismatch can produce invisible firmware-placement errors even when the processor and package appear interchangeable.
Keep the embedded ICE debug signals and clock-related routing away from sensitive serial or external-bus interfaces where practical. Use controlled impedance for external-bus connections when the connected device or cable imposes a defined impedance, and avoid routing high-speed edges beneath split power-plane boundaries. Add test points for supply, reset, and principal serial signals to simplify production validation and field troubleshooting. Preserve clearance around exposed package geometry according to the manufacturer's assembly and cleaning guidance.
合规信息
Compliance declarations and automotive qualification were not stated in the verified device records. Confirm the exact suffix-specific declarations and material documentation with the manufacturer before release.