ATMEGA128-16AU - 8-Bit AVR MCU, 128KB Flash, 16MHz | Microchip
料号： ATMEGA128-16AU ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $17.04 | $17.04 |
| 10 | $16.2 | $162.00 |
| 100 | $15.5 | $1,550.00 |
| 500 | $14.9 | $7,450.00 |
| 1,000 | $14.3 | $14,300.00 |
ATMEGA128-16AU 概述
An 8-bit AVR microcontroller is a single-chip processor built on the AVR enhanced RISC architecture, in which most instructions execute in a single clock cycle. Within the power-management and embedded-control hierarchy, it functions as the central computing element of a system, replacing discrete logic and analog control circuitry while offering flash-based field reprogrammability.
Key features include 128KB self-programmable Flash with a boot section for in-application programming, 4KB internal SRAM, 4KB EEPROM for non-volatile parameter storage, and throughput approaching 16 MIPS at 16 MHz, allowing designers to optimize power consumption versus processing speed.
Technically, the ATmega128 combines an 8-channel 10-bit A/D converter with an external-memory interface (up to 64KB external data space via PORTA/PORTC multiplexed addressing), two 8-bit and two 16-bit timers with PWM outputs, two USARTs, SPI, and a Two-Wire Interface, plus a JTAG boundary-scan and debug port. The AVR Harvard architecture with 32 general-purpose registers enables efficient C-compiled code execution.
Typical applications include industrial control and automation nodes, general embedded systems, data loggers, and legacy ATmega103 upgrades, since the ATmega128 is 100% pin compatible with ATmega103 and can replace it on existing PCBs.
A key design consideration is supply voltage: the 16 MHz -16AU speed grade requires 4.5V to 5.5V operation; the ATmega128L variant is needed for 2.7V-5.5V low-voltage designs. Provide decoupling capacitors on all VCC/AVCC pins and use the internal RC or external crystal clock option accordingly.
This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
直接替换替代料： ATMEGA128-16AU ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： ATMEGA128-16AU （相同外形与封装尺寸） ——差异在于 Flash Memory, Operating Temperature, Package, RoHS Status, Timers/Counters.
快速对比工具——选择替代料号进行并排对比：
ATMEGA128A-AU
✅ 直接替换✓ 有现货
$4.3 / 个
查看数据手册 →ATMEGA128-16AN
✅ 直接替换✓ 有现货
$7.44 / 个
查看数据手册 →ATMEGA128-16AI
✅ 直接替换✓ 有现货
$5.9 / 个
查看数据手册 →ATMEGA1281-16MUR
✅ 直接替换✓ 有现货
$8.78 / 个
查看数据手册 →AT90CAN128-16AUR
✅ 直接替换📋 参考替代料（不在目录中）
ATMEGA128-16AU 最大额定值与电气特性
| Core Architecture | 8-bit AVR RISC |
| Flash Memory | 128 KB (64K x 16) In-System Programmable |
| SRAM | 4 KB |
| EEPROM | 4 KB |
| 最大时钟频率 | 16 MHz |
| Throughput | 16 MIPS at 16 MHz (approx. 1 MIPS per MHz) |
| Supply Voltage Range | 4.5 V to 5.5 V (16 MHz speed grade) |
| ADC | 8-channel 10-bit |
| Debug Interface | JTAG for on-chip debugging |
| 封装 | 64-TQFP (14x14 mm) |
| 安装类型 | Surface Mount |
| Temperature Grade | Industrial (IND TEMP) |
| External Memory Interface | Supported (up to 64 KB external data memory) |
| Serial Interfaces | 2x USART, SPI, Two-Wire Interface (I2C-compatible) |
| RoHS 状态 | Compliant (RoHS Y) |
ATMEGA128-16AU 64-tqfp (14x14 mm) 引脚配置指南
ATMEGA128-16AU（64-tqfp (14x14 mm) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： ATMEGA128-16AU.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ATMEGA128-16AU 适用于 6 应用s: Industrial Control and Automation, Data Acquisition and Logging Systems, General Purpose Embedded Systems, Legacy ATmega103 Board Upgrade, Motor Control and Actuation, Instrumentation Front Panels and HMI.
Industrial Control and Automation
The ATMEGA128-16AU fits industrial control nodes where deterministic 8-bit control, moderate code size, and rugged I/O matter. Its 128KB Flash accommodates state machines, communication stacks, and bootloaders, while the industrial temperature grade and 4.5V-5.5V supply suit noisy 5V plant environments. Two USARTs handle Modbus RTU links and diagnostics simultaneously, and the external memory interface extends RAM for buffering. With throughput of 16 MIPS at 16 MHz, closed-loop control at kilohertz rates is practical, and JTAG enables in-circuit debugging during commissioning of automated machinery.
推荐
Data Acquisition and Logging Systems
In data loggers, the ATmega128's 8-channel 10-bit ADC multiplexes multiple analog sensors without external front ends, and 4KB EEPROM retains calibration and configuration across power cycles. The 128KB Flash supports substantial logging firmware and file-system code, while the external memory interface addresses external SRAM when 4KB internal SRAM is insufficient for long sample buffers. Two USARTs allow simultaneous sensor-network capture and telemetry output. The 16 MHz clock provides 16 MIPS for real-time filtering, and the ADC interrupt-driven sampling keeps CPU load low during continuous acquisition campaigns.
推荐
General Purpose Embedded Systems
For general embedded products such as controllers, meters, and interface converters, the ATMEGA128-16AU offers a balanced feature set: 32 general-purpose registers, rich timer/PWM resources, SPI and Two-Wire Interface for peripherals, and a JTAG port that simplifies production debugging. The AVR architecture executes most instructions in a single cycle, delivering approximately 1 MIPS per MHz, so a 16 MHz system behaves like far slower-cycle-count competitors. Long-term availability and extensive community code make it low-risk for products with multi-year service lives, and the boot-section Flash supports field firmware updates.
推荐
Legacy ATmega103 Board Upgrade
The ATmega128 is 100% pin compatible with the ATmega103 and can replace it on existing printed circuit boards, as stated in the Microchip datasheet. Designs built around the ATmega103's 4MHz-era performance gain a 16 MHz clock, 128KB self-programmable Flash with boot section, JTAG debugging, and revised peripherals without PCB respin. Microchip's application note 'Replacing ATmega103 by ATmega128' documents the register-level and fuse differences engineers must address in firmware. This makes the ATMEGA128-16AU the sanctioned drop-in path for sustaining legacy 5V industrial and telecom hardware.
推荐
Motor Control and Actuation
With two 8-bit and two 16-bit timers providing multiple PWM channels, the ATMEGA128-16AU drives DC and stepper motors with modest gate-driver overhead. The 16 MHz clock yields PWM resolutions in the kilohertz carrier range appropriate for motor control, while external interrupt pins INT0-INT7 accept quadrature or Hall-feedback signals. The 10-bit ADC reads current-sense amplifiers for closed-loop torque control. Because all PWM and feedback functions are on-chip, the surrounding BOM stays small, and the 5V industrial supply range simplifies interfacing with standard driver ICs in actuator assemblies.
推荐
Instrumentation Front Panels and HMI
Human-machine interface boards benefit from the ATmega128's combination of ADC inputs for keypads and potentiometers, TWI for driving character LCD controllers, and ample Flash for menu systems and multilingual strings. The JTAG interface enables boundary-scan testing of assembled display boards, improving production quality. External memory expansion supports graphics buffers for small displays beyond what 4KB SRAM allows, and the dual USART bridges an RS-485 supervisory link with a local RS-232 service port. The 14x14 mm TQFP fits compact panel controllers while remaining hand-solderable and reworkable.
推荐
推荐产品汇总
工程参考数据： ATMEGA128-16AU ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ATMEGA128A-AU | ATMEGA1281-16MUR | AT90CAN128-16AUR |
|---|---|---|---|---|
| Package | 64-TQFP (14x14 mm) | 64-TQFP (14x14 mm) - same | 64-TQFP - same footprint | 64-TQFP - same footprint |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 128 KB | 128 KB | 128 KB | 128 KB |
| Max Clock Frequency | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
| Special Peripherals | JTAG, 2x USART, SPI, TWI, ext. memory interface | Same set (refreshed die) | Added USARTs / revised peripheral set | Adds CAN 2.0A/B controller |
| RoHS | Compliant ('U' suffix, green) | Compliant | Compliant ('R' reel, green) | Compliant |
关键差异点
- External memory expansion interface （对比 ATMEGA64A-AU)
- Refreshed-die continuity option （对比 ATMEGA128A-AU)
- CAN-fieldbus-ready pin-compatible path （对比 AT90CAN128-16AUR)
设计说明
The -16AU speed grade requires a 4.5V to 5.5V supply; do not power it from a 3.3V rail expecting 16 MHz operation. Decouple every VCC pin and AVCC with 100 nF ceramics placed within a few millimeters of the pins, plus bulk 10 uF per board. Tie AVCC to VCC through an LC filter when ADC accuracy matters, and keep AGND/AREF routing quiet. Estimated: at 16 MHz with I/O loaded, active current is typically in the tens of milliamps per the datasheet current-consumption tables.
The 64-TQFP (14x14 mm) exposes JTAG on PF7-PF4 (TDI/TDO/TMS/TCK). Reserve the 10-pin JTAG header footprint even if unused, because JTAG is enabled by default fuse settings and doubles as boundary-scan for production test. Route the external memory bus (PORTA multiplexed address/data, PORTC high address, PG2 ALE, PG0/PG1 WR/RD) with matched-ish lengths and series termination on ALE if long. Keep the crystal within 10 mm of XTAL pins with appropriate load capacitors.
Migrating from ATmega103: the ATmega128 changes several register locations and default fuse behavior; follow Microchip's 'Replacing ATmega103 by ATmega103/128' guidance and re-check WDTCR, MCUCR, and interrupt vector mapping. Also note the boot-loader section requires correct BOOTRST fusing, and EEPROM operation has a timed write sequence that must not be interrupted by power loss - add brown-out detection. Verify the exact operating temperature limits against the full datasheet before qualification.
合规信息
RoHS Y and green packaging indicated by the 'U' suffix and distributor compliance data (PartGenie: RoHS Y). REACH, halogen-free, and conflict-minerals statuses were not specified in the provided data - consult Microchip's official product compliance documentation.