ATSAMD20J15A-CNT - 32KB Flash Cortex-M0+ MCU 64-UFBGA | Microchip
料号： ATSAMD20J15A-CNT ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $3.95 | $3.95 |
| 10 | $3.55 | $35.50 |
| 100 | $3.18 | $318.00 |
| 500 | $2.85 | $1,425.00 |
| 1,000 | $2.54 | $2,540.00 |
ATSAMD20J15A-CNT 概述
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. The ATSAMD20J15 belongs to the Cortex-M0+ architecture family, the smallest and most energy-efficient ARM core for embedded use, sitting under Cortex-M0/M3/M4 in performance hierarchy. The SAM D20 series specifically targets low-power, mixed-signal applications with on-chip 12-bit analog and serial communication engines, fitting between 8-bit PIC MCUs and higher-performance Cortex-M4 parts in Microchip's portfolio.
Key features include six SERCOM serial engines configurable as UART, SPI, or I2C, a 12-bit 350 ksps ADC with up to 16 channels, a 10-bit 350 ksps DAC, six 16-bit Timer/Counters, and a full-speed USB 2.0 device interface. The device supports up to 48 MHz operation from 1.62 V to 3.63 V at -40C to +85C and includes an Event System for inter-peripheral signaling without CPU intervention.
The SAM D20 uses a single-cycle hardware multiplier, single-cycle 32-bit load/store, and Microchip's Sleepwalking technology that lets peripherals wake the CPU only when needed. The integrated 32 KB Flash supports live update via the built-in bootloader, and 4 KB SRAM provides deterministic data handling for real-time control loops.
Typical applications include home automation sensor nodes, consumer wearables, smart metering endpoints, industrial HMI front-ends, and low-power wireless sensor hubs. The Cortex-M0+ instruction set is binary-compatible with the broader ARM ecosystem, enabling portable firmware development with GCC, IAR, and Keil toolchains.
When designing with the ATSAMD20J15A-CNT, ensure the UFBGA-64 footprint supports 0.4 mm pitch routing, add a 1 uF and 0.1 uF decoupling pair near each power pin, and follow Microchip's SAM D20 hardware design checklist for USB impedance control when the USB interface is enabled.
This page consolidates distributor pricing, drop-in compatible alternatives, and practical design notes not found in a single manufacturer datasheet.
直接替换替代料： ATSAMD20J15A-CNT ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： ATSAMD20J15A-CNT （相同外形与封装尺寸） ——差异在于 Package, ADC, SRAM, Program Memory (Flash), RoHS Status.
快速对比工具——选择替代料号进行并排对比：
ATSAMD20J15A-AUT
✅ 直接替换✓ 有现货
$1.85 / 个
查看数据手册 →ATSAMD20J14A-CNT
✅ 直接替换✓ 有现货
$1.95 / 个
查看数据手册 →ATSAMD20G18A-MU
✅ 直接替换✓ 有现货
$3.51 / 个
查看数据手册 →ATSAMD20E18A-MU
✅ 直接替换✓ 有现货
$2.75 / 个
查看数据手册 →ATSAMC20J18A-MUT
✅ 直接替换✓ 有现货
$2.3 / 个
查看数据手册 →ATSAMD20J15A-CNT 最大额定值与电气特性
| Core Architecture | ARM Cortex-M0+ |
| Core Bit Width | 32-bit |
| 最大时钟频率 | 48 MHz |
| Program Memory (Flash) | 32 KB (32K x 8) |
| SRAM | 4 KB |
| Operating Voltage Range | 1.62 V to 3.63 V |
| 工作温度范围 | -40C to +105C |
| 封装 | 64-UFBGA (5x5 mm) |
| I/O Pin Count | 52 |
| SERCOM Modules | 6 (configurable UART/SPI/I2C) |
| ADC | 12-bit, up to 350 ksps, up to 16 channels |
| DAC | 10-bit, 350 ksps |
| USB Interface | USB 2.0 Full-Speed Device |
| Timer/Counters | Six 16-bit TC |
| RoHS 状态 | Compliant |
ATSAMD20J15A-CNT 64-ufbga (5x5 mm) 引脚配置指南
ATSAMD20J15A-CNT（64-ufbga (5x5 mm) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： ATSAMD20J15A-CNT.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ATSAMD20J15A-CNT 适用于 6 应用s: Home Automation Sensor Nodes, Consumer Wearable Devices, Smart Metering Endpoints, Industrial HMI Front-Ends, Low-Power Wireless Sensor Hubs, USB-Connected Embedded Peripherals.
Home Automation Sensor Nodes
The ATSAMD20J15A-CNT fits home automation sensor nodes because its 32-bit Cortex-M0+ core at 48 MHz executes Zigbee or Thread stack fragments while the six SERCOM channels drive multiple sensor buses. The 1.62-3.63 V supply range accepts single-cell Li-Ion or 3 V coin cells, and SleepWalking peripherals wake the CPU only on qualified events. Compared with discrete 8-bit MCU designs, the J15 integrates USB, ADC, and DAC on-die, reducing BOM for smart thermostats and occupancy sensors.
推荐
Consumer Wearable Devices
For fitness bands and wearable health monitors the ATSAMD20J15A-CNT delivers Cortex-M0+ performance under 100 uA/MHz active and below 1 uA in deep-sleep with RTC. The 12-bit ADC captures biometric signals, the 10-bit DAC drives haptics, and 4 KB SRAM buffers sensor fusion data. The 32 KB Flash supports BLE profiles plus sensor algorithms. The 64-UFBGA 5x5 mm footprint enables sub-10 mm wearable PCBs while keeping toolchain compatibility with the broader SAM D20 family.
推荐
Smart Metering Endpoints
Utility smart meters leverage the ATSAMD20J15A-CNT to run metering algorithms at 48 MHz while the 12-bit ADC samples current/voltage sensors. The 1.62-3.63 V range supports direct battery or rectified mains supply, and six 16-bit Timer/Counters drive precise energy pulse generation. The 32 KB Flash fits DLMS/COSEM or wireless M-Bus protocol fragments, and the Event System routes ADC-complete to DMA without CPU load, improving metering accuracy.
推荐
Industrial HMI Front-Ends
The ATSAMD20J15A-CNT drives industrial HMI panels with its 48 MHz Cortex-M0+ performance running LVGL or emWin graphics libraries. The six SERCOMs interface SPI displays, I2C touch controllers, and UART sensors simultaneously, while the USB Full-Speed device port enables firmware update and HID input. The 1.62-3.63 V supply tolerates industrial 24 V buck-derived rails, and -40C to +105C operation covers factory floor extremes.
推荐
Low-Power Wireless Sensor Hubs
Wireless sensor hubs built around the ATSAMD20J15A-CNT consolidate data from sub-GHz or BLE peripherals. The Cortex-M0+ at 48 MHz handles local processing, while SERCOM channels drive SPI/ UART wireless transceivers. The 4 KB SRAM caches packet bursts, and 32 KB Flash holds protocol stacks plus application code. Sleep current below 1 uA extends battery life to multi-year levels for duty-cycled environmental and asset-tracking nodes.
推荐
USB-Connected Embedded Peripherals
The ATSAMD20J15A-CNT targets USB peripherals such as HID input devices, CDC serial bridges, and custom vendor-class gadgets. The integrated USB 2.0 Full-Speed device port with on-chip transceiver eliminates external PHY, and 32 KB Flash stores USB stacks plus application logic. Six SERCOMs add UART/SPI expansion, while the 12-bit ADC and 10-bit DAC support mixed-signal USB audio or sensor interfaces with deterministic Cortex-M0+ execution.
推荐
推荐产品汇总
工程参考数据： ATSAMD20J15A-CNT ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ATSAMD20J15A-AUT | ATSAMD20J14A-CNT | ATSAMD20G18A-MU | ATSAMD20E18A-MU | ATSAMC20J18A-MUT |
|---|---|---|---|---|---|---|
| Package | 64-UFBGA (5x5 mm) | 64-TQFP | 64-UFBGA (5x5 mm) - same | 64-QFN | 64-QFN | 64-QFN |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Architecture | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ |
| Maximum Clock Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 32 KB | 32 KB | 16 KB | 256 KB | 256 KB | 256 KB |
| SRAM | 4 KB | 4 KB | 2 KB | 32 KB | 32 KB | 32 KB |
| Operating Voltage | 1.62 V to 3.63 V | 1.62 V to 3.63 V | 1.62 V to 3.63 V | 1.62 V to 3.63 V | 1.62 V to 3.63 V | 1.62 V to 3.63 V |
| USB Interface | USB 2.0 Full-Speed Device | USB 2.0 Full-Speed Device | USB 2.0 Full-Speed Device | USB 2.0 Full-Speed Device | USB 2.0 Full-Speed Device | USB 2.0 Full-Speed Device |
关键差异点
- Smallest Flash in the SAM D20J 64-UFBGA family （对比 ATSAMD20J18A-CNT)
- Higher Flash headroom in same family （对比 ATSAMD20J14A-CNT)
- Lower-power variant with same peripherals （对比 ATSAMC20J18A-MUT)
设计说明
The 64-UFBGA (5x5 mm) footprint uses 0.4 mm ball pitch, requiring 4-layer PCB with laser-drilled microvias and 0.2 mm trace width. Follow Microchip SAM D20 Hardware Design Checklist for via-in-pad design rules and solder mask openings. Keep USB D+/D- traces impedance-matched to 90 ohms differential per USB 2.0 Full-Speed specification if the USB interface is enabled.
Place a 1 uF X5R ceramic decoupling capacitor plus a 0.1 uF X7R bypass capacitor within 2 mm of each VDD pin pair. The SAM D20 is sensitive to supply ripple below 100 mV during SleepWalking events; use a ferrite bead on the analog AVDD supply if high ADC accuracy is required. Estimated: at 48 MHz core current ~10 mA, total decoupling bulk capacitance of at least 22 uF is recommended.
Do not skip the NRESET pull-up or leave the SWD pins (SWDIO, SWCLK) floating in production. The SAM D20 bootloader requires a valid SWD connection to recover from a corrupted Flash, and missing reset pull-up prevents reliable boot. Ensure the Boot Memory Protect fuses are configured via Atmel Studio before locking the device for production.
合规信息
RoHS compliant per Microchip product page. Operating temperature -40C to +105C industrial grade. AEC-Q100 not qualified; consider SAM D20 AEC-Q100 variants if automotive qualification is required.
