Microchip Technology

ATSAMG55J19B-AU - 120MHz Cortex-M4 MCU | Microchip

料号: ATSAMG55J19B-AU ✓ 量产中
1.62 V to 3.6 V Vdss 64-LQFP, 10 mm x 10 mm Package 120 MHz Speed 512 KB (512K x 8) Memory
最小起订量: 1 |

ATSAMG55J19B-AU 概述

The Microchip Technology ATSAMG55J19B-AU is a 32-bit ARM Cortex-M4 microcontroller with an integrated floating-point unit, operating at up to 120 MHz, and containing 512 KB of flash memory. The device is supplied in a 64-lead LQFP package measuring 10 mm by 10 mm. Its combination of deterministic control capability, DSP-oriented arithmetic, and low-power processing makes it suitable for industrial, communications, audio, and embedded control systems.

A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, data memory, and peripherals into one package. The ATSAMG55J19B belongs to the SAM G55 family of embedded microcontrollers. Within the semiconductor hierarchy, it combines an ARM Cortex-M4 processor, real-time embedded control, and low-power system management functions in a single integrated circuit.

The Cortex-M4 processor includes a single-precision floating-point unit, allowing the ATSAMG55J19B to perform floating-point calculations without software emulation. Its 120 MHz maximum clock rate supports responsive control loops, while 512 KB of flash provides program storage for firmware, configuration data, and application logic. The 64-LQFP package provides a conventional leaded surface-mount format that is visually inspectable and suitable for prototype assembly and conventional reflow production.

According to the Microchip product page, the floating-point unit is intended to improve throughput while helping applications reduce active processing time and reach low-power sleep states sooner. This is particularly useful in audio, communications, and industrial equipment where the controller alternates between computation-intensive operations and longer idle intervals. The fixed-function peripherals and memory interfaces are integrated within the SAM G55 architecture rather than requiring separate external logic.

Typical applications include real-time audio and signal processing, industrial control modules, communications equipment, connected embedded products, and low-power sensor nodes. In these systems, the microcontroller can execute control and filtering algorithms, service communication peripherals, and enter sleep modes when workload conditions permit. The 10 mm by 10 mm LQFP-64 footprint also simplifies routing compared with very fine-pitch ball-grid-array packages.

When laying out a board, preserve the manufacturer-defined pin, power, decoupling, and exposed support requirements in the ATSAMG55J19B data sheet. Keep high-current return paths compact, place decoupling capacitance close to the relevant supply pins, and validate signal-integrity and thermal performance on the final PCB. Firmware development should also account for the required clock, reset, boot, and low-power configuration.

This product page consolidates the official device identity, package information, distributor observations, cross-reference candidates, and practical selection guidance into an engineering-focused reference. It also highlights where firmware revision, temperature grade, packaging, and qualification requirements must be checked before treating a related device as a drop-in replacement.

直接替换替代料: ATSAMG55J19B-AU ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: ATSAMG55J19B-AU (相同外形与封装尺寸) ——差异在于 Package, Core Architecture, Audio Interface, Operating Temperature, USB.

Microchip Technology
Package: 64-LQFP (10x10 mm)
Core Architecture: ARM Cortex-M4 with FPU
Audio Interface: I2S with PDM/TDM and sample-rate converter
对比 ATSAMG55J19B-AU →
Microchip Technology
Package: 64-pin QFN (7.5 x 7.5 mm)
Core Architecture: 32-bit RISC with DSP extensions
Operating Temperature: -40C to +85C (Industrial)
对比 ATSAMG55J19B-AU →
Microchip Technology
Package: 64-pin LQFP (10x10 mm)
Core Architecture: ARM Cortex-M4 with single-precision FPU
Audio Interface: I2S (digital audio)
对比 ATSAMG55J19B-AU →
Microchip Technology
Package: 64-QFN MRLB, 7.5 x 7.5 mm with exposed pad
Core Architecture: ARM Cortex-M4 with FPU (single-precision) and DSP extensions
Audio Interface: I2S / SSC (Synchronous Serial Controller)
对比 ATSAMG55J19B-AU →

ATSAMG55J19B-AUT

✅ 直接替换
Microchip Technology
📦 64-LQFP (10 mm x 10 mm)
ARM Cortex-M4 with single-precision FPU · 120 MHz · 512 KB (512K x 8) · 176 KB · 1.62 V to 3.6 V · 64-pin LQFP (10x10 mm) · Surface Mount · -40C to +85C (Industrial)

联系询价

查看数据手册 →

ATSAMG55J19A-AU

✅ 直接替换
Microchip Technology
📦 64-LQFP (10 mm x 10 mm)
ARM Cortex-M4 with FPU · 120 MHz · 32-bit RISC + DSP extensions + FPU (single-precision) · 512 KB (512K x 8) · 160 KB · 16 KB (retained in deep sleep) · 1.62 V to 3.6 V · -40 C to +85 C (industrial)

联系询价

查看数据手册 →

ATSAMG55J19A-AUT

✅ 直接替换
📦 64-LQFP (10 mm x 10 mm)
CPU frequency is identical at 120 MHz and flash is identical at 512 KB; the differences are the A-versus-B designation and the AUT versus AU order suffix, with no published difference in the 64-LQFP footprint.

📋 参考替代料(不在目录中)

ATSAMG55J19B-MUT

✅ 直接替换
Microchip Technology
📦 64-LQFP (10 mm x 10 mm)
ARM Cortex-M4 with FPU (single-precision) and DSP extensions · 120 MHz · 512 KB (512K x 8) · 176 KB · 8 KB · 1.62 V to 3.6 V (single supply) · -40 C to +85 C (Industrial, MUT suffix) · 64-QFN MRLB, 7.5 x 7.5 mm with exposed pad

联系询价

查看数据手册 →

ATSAMG55J19B-MUT

✅ 直接替换
Microchip Technology
📦 64-LQFP (10 mm x 10 mm)
ARM Cortex-M4 with FPU (single-precision) and DSP extensions · 120 MHz · 512 KB (512K x 8) · 176 KB · 8 KB · 1.62 V to 3.6 V (single supply) · -40 C to +85 C (Industrial, MUT suffix) · 64-QFN MRLB, 7.5 x 7.5 mm with exposed pad

联系询价

查看数据手册 →

ATSAMG55J19B-AU 最大额定值与电气特性

Product Type 32-bit ARM Cortex-M4 microcontroller with FPU
Processor Core ARM Cortex-M4
Architecture ARM 32-bit
Maximum CPU Frequency 120 MHz
Floating-Point Unit Single-precision FPU
Flash Memory 512 KB (512K x 8)
Program Memory Type Flash
Supply Voltage Range 1.62 V to 3.6 V
封装 64-LQFP, 10 mm x 10 mm
Package Height 1.4 mm maximum
安装类型 Surface mount
Industrial Temperature Grade Industrial temperature grade
Material Compliance RoHS
Order Code TQFP, MRL B, industrial temperature
Shipping Configuration Tray

ATSAMG55J19B-AU 1.4 mm maximum 引脚配置指南

ATSAMG55J19B-AU(1.4 mm maximum 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

ATSAMG55J19B-AU 的 1.4 mm maximum 封装引脚图

暂无详细引脚数据: ATSAMG55J19B-AU.

请参阅 数据手册 以查看完整引脚配置。

典型应用

ATSAMG55J19B-AU 适用于 6 应用s: Industrial Control Modules, Embedded Audio Processing, Communications Equipment, Low-Power Sensor Nodes, Connected IoT Products, Test and Measurement Instruments.

🏭

Industrial Control Modules

The ATSAMG55J19B-AU fits industrial control modules that combine deterministic peripheral handling with higher-level signal processing. Its 120 MHz ARM Cortex-M4 core and integrated single-precision FPU provide computational capacity for control loops, filtering, and state estimation without requiring a separate processor. The 512 KB of flash supports substantial embedded application code, while the 64-LQFP package provides visible joints and a 10 mm by 10 mm footprint for conventional industrial board assembly. Designers should verify the exact peripheral set, operating-temperature requirements, and low-power behavior in the manufacturer datasheet before production release.

🎧

Embedded Audio Processing

The ATSAMG55J19B-AU is appropriate for embedded audio products that perform real-time filtering, mixing, or control in an MCU rather than a separate DSP. The Cortex-M4 core operates up to 120 MHz, and its single-precision floating-point unit accelerates common audio calculations and reduces the need for software emulation. The 512 KB flash provides room for codecs, control firmware, and audio processing routines. Engineers should confirm interface timing, required sample rates, and peripheral routing in the manufacturer datasheet, then validate latency and audible performance in the complete audio signal chain.

🌐

Communications Equipment

The ATSAMG55J19B-AU can serve as the control processor in communications equipment where protocol handling, local user-interface logic, and real-time data processing are required. Its 120 MHz Cortex-M4 core supports responsive packet and control processing, while the floating-point unit assists with modulation, filtering, and signal-level calculations. The 512 KB flash capacity accommodates networking stacks and application firmware when configured appropriately. Final qualification should confirm the required serial, Ethernet, USB, or other communication peripherals and verify signal integrity across the complete board rather than relying on headline CPU specifications alone.

🧩

Low-Power Sensor Nodes

The ATSAMG55J19B-AU suits low-power sensor nodes that alternate between periodic measurements and longer sleep intervals. Microchip specifically describes the Cortex-M4 FPU as helping applications complete active work efficiently and reach sleep faster, which can improve the duty cycle of battery-operated equipment. The device's 1.62 V to 3.6 V operating range accommodates low-voltage system rails, while 512 KB flash supports sensing, communication, and local processing firmware. Designers should select the exact sleep mode, configure unused peripherals correctly, and verify current consumption under realistic sensor and radio activity.

🧩

Connected IoT Products

The ATSAMG55J19B-AU provides a compact processing platform for connected products that must combine local control, data conditioning, and communications firmware. Its 120 MHz Cortex-M4 performance and 512 KB flash make it useful for gateway-lite, controller, and smart-node designs, while the 64-LQFP package avoids the fine-pitch complexity of larger grid-array devices. The industrial-temperature order designation supports extended-temperature product planning. Before schematic release, confirm connectivity peripherals, antenna and radio integration, boot requirements, regulatory constraints, and the system-level sleep strategy in the target product architecture.

🔧

Test and Measurement Instruments

The ATSAMG55J19B-AU is appropriate for embedded test and measurement front ends where calibration, sampling control, numerical processing, and user-interface handling are combined in one controller. The single-precision FPU supports calculations involving sensor scaling and digital filtering, while the 120 MHz core can manage multiple real-time tasks. Its 512 KB flash is suitable for instrument firmware, and the 10 mm by 10 mm LQFP package supports conventional inspection after reflow. Accuracy depends on the analog front end, reference source, calibration method, and PCB layout, so validate the complete signal path against the required measurement uncertainty.

推荐产品汇总

What is the ATSAMG55J19B-AU?
The ATSAMG55J19B-AU is a Microchip Technology 32-bit ARM Cortex-M4 microcontroller with a single-precision floating-point unit, a maximum clock frequency of 120 MHz, and 512 KB of flash memory. According to the Microchip ATSAMG55J19B product page, the integrated FPU improves floating-point throughput and supports faster execution of control and signal-processing workloads. The device is offered in a 64-LQFP package measuring 10 mm by 10 mm.
What are the key specifications of ATSAMG55J19B-AU?
The ATSAMG55J19B-AU combines a 32-bit ARM Cortex-M4 core, single-precision floating-point unit, 120 MHz maximum operating frequency, and 512 KB of flash memory. According to the Microchip product page and the manufacturer datasheet, it operates from 1.62 V to 3.6 V and is supplied in a 64-LQFP package measuring 10 mm by 10 mm. It is also identified as an industrial-temperature, order-code-B device with a tray shipping configuration.
Where can I download the ATSAMG55J19B-AU datasheet?
The ATSAMG55J19B-AU datasheet is available through the official Microchip ATSAMG55J19B product page at https://www.microchip.com/en-us/product/ATSAMG55J19B. Use the manufacturer datasheet for the authoritative pin-description table, electrical characteristics, clock requirements, power sequencing, memory map, and recommended application circuit. The related ATSAMG55J19B-AU part differs from the base ATSAMG55J19B ordering code, so confirm the suffix and package details against the selected manufacturer document.
Where can I find the ATSAMG55J19B-AU pinout?
The ATSAMG55J19B-AU pinout is a 64-lead LQFP arrangement in a 10 mm by 10 mm package. Use the pin-description table in the Microchip manufacturer datasheet when assigning PCB nets because the exact signal multiplexed onto each I/O pin can depend on peripheral configuration. The public product listing confirms the 64-LQFP package, but a complete numbered pin table is not reproduced on this page. The standard LQFP-64 package drawing is also shown for physical orientation.
How much power does the ATSAMG55J19B-AU supply?
The ATSAMG55J19B-AU supports a 1.62 V to 3.6 V operating supply range, according to the TME product listing and Microchip documentation. Actual current consumption depends on CPU activity, clock configuration, enabled peripherals, I/O loading, and sleep mode. Use the manufacturer datasheet's operating-current and low-power tables for design calculations rather than treating the supply-voltage range as a power-consumption rating. Decoupling and rail sequencing should follow the recommended application circuit.
What is the ATSAMG55J19B-AU equivalent?
The closest identified same-brand alternatives are ATSAMG55J19A-AU, ATSAMG55J19A-AUT, and ATSAMG55J19B-AUT, which use the same 64-LQFP form and are listed as functional equivalents or related devices. Their shared 120 MHz Cortex-M4 architecture and 512 KB flash capacity make them relevant for replacement evaluation. Exact interchangeability still depends on revision B, temperature range, packing code, qualification, and any revised errata or device-specific differences.
Can ATSAMG55J19A-AU replace ATSAMG55J19B-AU?
ATSAMG55J19A-AU is a same-package functional-equivalent candidate for ATSAMG55J19B-AU, with both devices identified as 64-LQFP SAM G55 microcontrollers with a 120 MHz Cortex-M4 core and 512 KB flash. The notable difference is the A versus B revision or order-code designation, whose exact silicon or documentation implications should be checked in the Microchip datasheet. Use it as a drop-in candidate only after confirming peripheral compatibility, errata, qualification, and the required B revision.
Is ATSAMG55J19B-AU pin compatible with ATSAMG55J19B-AUT?
ATSAMG55J19B-AUT is a closely related candidate that retains the ATSAMG55J19B base device and 64-LQFP package. The identifying difference is the ordering suffix, which controls the shipping configuration; the TME listing for the AU version identifies a tray configuration. Before treating the AUT device as a drop-in replacement, confirm whether the receiving process requires tape-and-reel handling rather than tray handling and review the ordering-information table for all temperature and qualification conditions.
What can replace ATSAMG55J19B-AU?
ATSAMG55J19B-AUT, ATSAMG55J19A-AU, and ATSAMG55J19A-AUT are the leading identified replacement candidates for ATSAMG55J19B-AU because they share the SAM G55 family, 64-LQFP package, 120 MHz Cortex-M4 architecture, and 512 KB flash configuration. The most conservative choice is ATSAMG55J19B-AUT because it retains the B base designation. Validate the exact suffix, operating-temperature grade, packing method, silicon revision, and qualification before production use.
What is the best Microchip equivalent for ATSAMG55J19B-AU?
The best direct Microchip candidate is ATSAMG55J19B-AUT because it retains the same ATSAMG55J19B base identity while changing the order suffix. The ATSAMG55J19A-AU and ATSAMG55J19A-AUT devices are also identified as functional equivalents in the same 64-LQFP family, but their A-versus-B designation introduces a revision check. No cross-brand MCU was identified as a pin-compatible replacement, so migrating to another manufacturer generally requires firmware, peripheral, and board-level verification beyond footprint matching.
When should I choose ATSAMG55J19B-AU instead of ATSAMG55J19A-AU?
Choose ATSAMG55J19B-AU when the design specifically requires the B order or silicon designation or when qualification records approve that revision. Choose ATSAMG55J19A-AU only after the manufacturer documentation confirms that the A revision contains every peripheral, electrical characteristic, and erratum required by the application. Both devices are listed with a 120 MHz Cortex-M4 core, 512 KB flash, and 64-LQFP package, but matching headline specifications alone does not establish complete drop-in equivalence.
Is ATSAMG55J19B-AU suitable for industrial control and audio applications?
The ATSAMG55J19B-AU is suitable for industrial control and embedded audio designs when its documented peripherals, supply range, and temperature rating satisfy the system requirements. Its 120 MHz Cortex-M4 core with an FPU supports responsive algorithms and floating-point processing, while 512 KB flash supports embedded firmware. The industrial-temperature designation makes it more appropriate for extended-temperature equipment than a consumer-temperature alternative, provided the complete electrical and qualification requirements are met.
Where to buy ATSAMG55J19B-AU online?
Use the Request a Quote form on this page to request ATSAMG55J19B-AU availability, current lead time, and a formal quotation. The device is identified by the exact MPN ATSAMG55J19B-AU and is offered in a 64-LQFP tray configuration. When requesting a quotation, confirm the manufacturer name, 512 KB flash, 120 MHz rating, industrial-temperature order code, and 64-LQFP package so that an order-code variant is not substituted unintentionally.
What is the price of ATSAMG55J19B-AU?
The current commercial price for ATSAMG55J19B-AU is generated through the Request a Quote form on this page. Submit the exact MPN and desired quantity to obtain current pricing, stock status, and lead time for the 64-LQFP tray configuration. Do not treat a related ATSAMG55J19B-AUT listing as an exact-price substitute because the order suffix can change packing and commercial handling even when the electrical device identity is closely related.
Is ATSAMG55J19B-AU in stock, and what is its lead time?
Current stock and lead time for ATSAMG55J19B-AU should be confirmed through the Request a Quote form on this page. The exact device is listed by multiple distribution channels, but that observation alone does not establish present inventory at a particular quantity. When requesting a quotation, state the required quantity, tray packaging requirement, target delivery date, and whether a no-partial-shipment policy is required. The manufacturer identification and full suffix should remain ATSAMG55J19B-AU.

工程参考数据: ATSAMG55J19B-AU ——对比、设计指导和合规信息。

选型指南

Select ATSAMG55J19B-AU when the design specifically calls for the B-AU industrial-temperature, tray-packed 64-LQFP device and requires a 120 MHz Cortex-M4 with 512 KB flash. ATSAMG55J19B-AUT is the closest choice when the base B identity is correct but the alternate documented shipping suffix fits production handling better. ATSAMG55J19A-AU and ATSAMG55J19A-AUT are same-package functional-equivalent candidates, but the A-versus-B designation requires review of revision notes, errata, qualification, and exact ordering conditions before substitution. ATSAMG55J19B-MU and ATSAMG55J19B-MUT retain the B base identity but require confirmation of the M-order suffix meaning and production requirements. For any related part, verify pin multiplexing, peripheral availability, memory organization, clock setup, low-power behavior, temperature limits, and firmware compatibility. A different-manufacturer Cortex-M4 device may share a similar package or CPU rating but is not a drop-in replacement without complete electrical, peripheral, and software validation.

与替代料对比

参数 本产品 ATSAMG55J19B-AUT ATSAMG55J19A-AU ATSAMG55J19A-AUT ATSAMG55J19B-MU ATSAMG55J19B-MUT
Package 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Processor Core ARM Cortex-M4 ARM Cortex-M4 ARM Cortex-M4 ARM Cortex-M4 ARM Cortex-M4 ARM Cortex-M4
Maximum CPU Frequency 120 MHz 120 MHz 120 MHz 120 MHz 120 MHz 120 MHz
Flash Memory 512 KB 512 KB 512 KB 512 KB 512 KB 512 KB
Order or Revision Code B-AU B-AUT A-AU A-AUT B-MU B-MUT

关键差异点

  • Exact B-series identity with the AU order configuration (对比 ATSAMG55J19B-AUT)
  • Same-package upgrade candidate without changing the CPU or flash allocation (对比 ATSAMG55J19A-AU)
  • 64-LQFP compatibility across the identified SAM G55 candidates (对比 ATSAMG55J19A-AUT)
  • Low-risk same-base selection for alternate production handling (对比 ATSAMG55J19B-MUT)

设计说明

Route the ATSAMG55J19B-AU power and ground connections according to the manufacturer recommended layout, placing input and bulk decoupling capacitors close to their associated supply pins. The 64-LQFP package permits visual inspection, but its 0.5 mm lead pitch still requires adequate board density and manufacturing capability. Confirm the courtyard, solder-mask clearance, thermal land recommendations, and exposed support connections in the official package drawing before releasing the PCB footprint.

Design the 1.62 V to 3.6 V supply rail with sequencing, monitoring, and decoupling appropriate to the selected SAM G55 operating mode. The Cortex-M4 can operate at up to 120 MHz, but current demand depends on frequency, active peripherals, and the duty cycle of computation versus sleep. Use the manufacturer operating-current tables for worst-case rail sizing and verify startup and brownout behavior across the complete power-supply tolerance range.

Do not interchange the A and B order or silicon designations solely because ATSAMG55J19A-AU and ATSAMG55J19B-AU share a 64-LQFP footprint and the same 120 MHz, 512 KB headline ratings. Review the manufacturer ordering information, revision notes, errata, and qualification records for the exact assembled device. Likewise, verify whether the intended production flow requires tray handling or the alternate order suffix before approving a purchasing substitution.

Separate sensitive analog or communication paths from switching-converter and high-current return paths even when the microcontroller itself is operating from a low-noise rail. Keep clock, debug, and programming interfaces accessible for production testing, and observe the manufacturer's guidance for unused pins and configuration pins. Validate the final arrangement with signal-integrity and EMC testing because the LQFP package geometry does not eliminate board-level coupling or edge-rate problems.

合规信息

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The LCSC listing identifies the exact ATSAMG55J19B-AU device as RoHS compliant. Other environmental, automotive-qualification, lead-free, halogen-free, and conflict-minerals statuses are not established by the cited device information.

相关搜索

atsamg55j19b aut atsamg55j19b mut ATSAMG55J19B-AU datasheet ATSAMG55J19B-AU pinout ATSAMG55J19B-AU datasheet pdf ATSAMG55J19B-AU equivalent ATSAMG55J19B-AU replacement ATSAMG55J19B-AU footprint ATSAMG55J19B-AU price ATSAMG55J19B-AU stock Microchip ATSAMG55J19B-AU ATSAMG55J19B-AU vs ATSAMG55J19A-AU

相关元器件 & 术语

Microchip Technology ATSAMG55J19B-AU ATSAMG55J19B ATSAMG55J19B-AUT ATSAMG55J19A-AU ATSAMG55J19A-AUT ATSAMG55J19B-MU ATSAMG55J19B-MUT ARM Cortex-M4 SAM G55 32-bit microcontroller embedded microcontroller single-precision floating-point unit FPU 512 KB flash memory 120 MHz 64-LQFP LQFP family surface mount SMD industrial temperature grade RoHS embedded control industrial automation embedded audio
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情