Microchip Technology

ATTINY26L-8PJ - 8MHz AVR MCU with ADC | Microchip Technology

料号: ATTINY26L-8PJ ✓ 量产中
2.7 V to 5.5 V Vdss 20-pin PDIP Package 8 MHz Speed 2 KB (1K x 16 bits) Memory
最小起订量: 1 |

ATTINY26L-8PJ 概述

Microchip Technology ATTINY26L-8PJ is an 8-bit AVR microcontroller operating at up to 8 MHz, with 2 KB of Flash memory, 128 bytes of EEPROM, and 128 bytes of SRAM in a 20-pin PDIP package. It provides up to 16 general-purpose I/O lines and integrates an 11-channel, 10-bit analog-to-digital converter with two differential voltage input gain stages.

An AVR microcontroller is a compact embedded-control device that combines a CPU core, programmable memory, digital I/O, timers, interrupts, and analog conversion on one integrated circuit. The ATtiny26L belongs to Microchip's low-power AVR family, where low-dropout operation supports portable and battery-powered equipment. Its instruction architecture executes many instructions within a small number of clock cycles, while internal and external oscillator options give designers flexibility in clock selection and system timing.

Core features include 32 general-purpose working registers, two 8-bit timer/counter blocks, one timer with PWM outputs, internal and external interrupts, and a programmable watchdog timer. The 10-bit ADC supports 11 input channels, allowing multiple analog sensors to share one peripheral. Its 2 KB Flash capacity stores 1K by 16 bits of program memory, while 128 bytes of EEPROM preserve small quantities of nonvolatile configuration data and 128 bytes of SRAM support working variables.

The ATTINY26L-8PJ is useful when a design needs more analog measurement capability than a basic digital controller but not the memory or peripheral complexity of a larger microcontroller. It combines an 8 MHz clock with a low-power AVR architecture and operates across a 2.7 V to 5.5 V supply range. The microcontroller can use its internal oscillator or an external clock source, making it suitable for products where minimizing external components is valuable.

Typical uses include compact industrial sensor nodes, low-power battery-operated instruments, analog monitoring modules, lighting controls, teaching platforms, and small embedded-control products. In these applications, the ADC and PWM resources can reduce the need for separate analog and timing components, while EEPROM preserves calibration values or user settings between power cycles.

PCB design should provide a stable supply rail and follow the decoupling and grounding guidance in the Microchip ATtiny26 Summary Datasheet. Keep the analog input traces compact, isolate sensitive analog nodes from switching and high-current paths, and verify reset, clock, programming, and unused-pin arrangements before releasing a production layout.

This product page combines the verified device specifications with practical application guidance, package information, sourcing instructions, and a cautious drop-in replacement assessment. It highlights where the ATTINY26L-8PJ fits compact embedded systems and where engineers must validate timing, analog performance, programming compatibility, and lifecycle requirements before substitution.

直接替换替代料: ATTINY26L-8PJ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

ATTINY26L-8PI

✅ 直接替换
📦 20-pin PDIP
Shares the 20-pin PDIP footprint and identical listed 8 MHz clock, 2 KB Flash, 128-byte EEPROM, and 128-byte SRAM; the ordering-code or grade difference is not characterized

📋 参考替代料(不在目录中)

ATTINY26L-8PJ 最大额定值与电气特性

CPU Architecture 8-bit AVR enhanced RISC
最大时钟频率 8 MHz
Flash Memory 2 KB (1K x 16 bits)
EEPROM Memory 128 bytes
SRAM 128 bytes
General-Purpose I/O Lines Up to 16 lines
General-Purpose Working Registers 32 registers
Timer/Counters 2 timer/counter blocks
PWM Channels 1 timer with PWM outputs
ADC Resolution 10 bits
ADC Input Channels 11 channels
Differential Analog Input Gain Stages 2 stages
Operating Voltage Range 2.7 V to 5.5 V
Oscillator Options Internal and external oscillators
Interrupt Sources Internal and external interrupts
Watchdog Timer Programmable watchdog timer
封装 20-pin PDIP
安装类型 Through-hole
RoHS 状态 Compliant

ATTINY26L-8PJ 20-pin pdip 引脚配置指南

ATTINY26L-8PJ(20-pin pdip 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

ATTINY26L-8PJ 的 20-pin pdip 封装引脚图

暂无详细引脚数据: ATTINY26L-8PJ.

请参阅 数据手册 以查看完整引脚配置。

典型应用

ATTINY26L-8PJ 适用于 6 应用s: Industrial Sensor Node, Battery-Powered Monitoring Device, LED Lighting Controller, Analog Control Interface, Educational Microcontroller Platform, Small Embedded Control Board.

🏭

Industrial Sensor Node

The ATTINY26L-8PJ fits compact industrial sensor nodes because its 11-channel, 10-bit ADC can monitor several analog inputs while the 8 MHz AVR core performs local filtering and control. The 128-byte EEPROM is useful for retaining calibration coefficients or operating thresholds between power cycles, and the 2 KB Flash supports a focused application rather than a general-purpose control platform. With a 2.7 V to 5.5 V supply range, the controller can operate directly from 3.3 V or 5 V industrial rails. Keep analog traces short and place filtering components near their associated inputs to limit pickup from switching nodes.

🔋

Battery-Powered Monitoring Device

The low-power ATtiny26L architecture makes the ATTINY26L-8PJ appropriate for battery-powered monitoring devices where a small 8-bit controller must measure and act on a limited number of inputs. Its 10-bit ADC supports threshold-based sensing, while internal oscillator options can reduce component count. The 2 KB Flash and 128-byte SRAM are sufficient for compact acquisition and control loops rather than heavy buffering. System endurance depends on sleep-mode design, ADC conversion frequency, and whether the external watchdog or internal timer supervises operation.

💡

LED Lighting Controller

The ATTINY26L-8PJ can control compact LED lighting systems where PWM timing, local button input, and current sensing are required without a larger control platform. One of its two 8-bit timer/counters supports PWM outputs, allowing software-defined dimming or indication patterns, while the remaining I/O can interface with switches and drivers. The 2 KB Flash is appropriate for compact lighting sequences and configuration logic. Confirm the LED driver's voltage and input thresholds before connecting a 2.7 V to 5.5 V controller directly to a higher-voltage power stage.

📟

Analog Control Interface

The ATTINY26L-8PJ is suited to analog control interfaces that combine sensor acquisition with supervisory logic. Its 11-channel, 10-bit ADC and two differential input gain stages provide multiple measurement paths, while 32 working registers help organize control calculations in an 8-bit architecture. PWM can generate a simple actuator command or excitation signal when a more precise fixed-period control output is not required. Use separate analog and digital grounding techniques, and confirm the complete electrical limits in the Microchip ATtiny26 Summary Datasheet before selecting input ranges.

🧑‍🏫

Educational Microcontroller Platform

The ATTINY26L-8PJ works well in educational microcontroller platforms because it combines an accessible 8-bit AVR core, 2 KB Flash, EEPROM, PWM, timers, interrupts, and an 11-channel 10-bit ADC in a 20-pin PDIP package. Through-hole construction makes it straightforward to prototype on a breadboard or perforated board. Students can exercise ADC acquisition, timer interrupts, PWM generation, nonvolatile parameter storage, and low-power design without requiring a larger development kit. A 2.7 V to 5.5 V operating range also supports common classroom supply arrangements.

🔧

Small Embedded Control Board

The ATTINY26L-8PJ is appropriate for a small embedded control board that needs local logic, one or more analog measurements, and programmable timing. The 8 MHz AVR core provides ample throughput for state machines and simple control algorithms, while two timer/counter blocks support timing and PWM tasks. With up to 16 I/O lines, the device can connect buttons, displays, and external logic, although memory limits make careful firmware and peripheral allocation important. A focused product with stable 3.3 V or 5 V power can use the device without a larger microcontroller family.

推荐产品汇总

ATTINY26L-8PI Closely related 20-pin PDIP ATtiny26L controller 用于: Industrial Sensor Node, Battery-Powered Monitoring Device, LED Lighting Controller, Analog Control Interface, Educational Microcontroller Platform, Small Embedded Control Board ATTINY26L-8PU Surface-mount family member for compact PCB redesigns 用于: Industrial Sensor Node, LED Lighting Controller, Educational Microcontroller Platform ATTINY26L-8SU Microchip Technology 用于: Battery-Powered Monitoring Device, Small Embedded Control Board ATTINY26L-8PC Surface-mount ATtiny26L family option 用于: Analog Control Interface
What is the ATTINY26L-8PJ?
The ATTINY26L-8PJ is an 8-bit AVR microcontroller with up to 2 KB of Flash, 128 bytes of EEPROM, 128 bytes of SRAM, and an 8 MHz maximum clock in a 20-pin PDIP package. According to the Microchip ATtiny26 Summary Datasheet, it includes up to 16 I/O lines, two 8-bit timers, one PWM-capable timer, a programmable watchdog, and an 11-channel 10-bit ADC.
What are the key specifications of ATTINY26L-8PJ that engineers should know?
The ATTINY26L-8PJ combines an 8-bit AVR core, an 8 MHz maximum clock, 2 KB Flash, 128 bytes EEPROM, 128 bytes SRAM, and up to 16 I/O pins. The Microchip ATtiny26 Summary Datasheet also identifies two 8-bit timer/counters, one with PWM outputs, internal and external oscillator options, internal and external interrupts, a programmable watchdog timer, and an 11-channel, 10-bit ADC.
What is the supply voltage of ATTINY26L-8PJ?
The ATTINY26L-8PJ operates from 2.7 V to 5.5 V. This range supports both 3.3 V and 5 V embedded systems. The Microchip ATtiny26 Summary Datasheet identifies internal and external oscillator options, so the clocking method should be selected alongside the available supply rail and the voltage tolerance required by the attached sensors and peripherals.
Where can I download the ATTINY26L-8PJ datasheet PDF?
The Microchip ATtiny26 Summary Datasheet PDF is available from the manufacturer's device document at https://ww1.microchip.com/downloads/en/DeviceDoc/1477S.pdf. It documents the ATtiny26L family's 2 KB Flash, 128-byte EEPROM, 128-byte SRAM, timers, interrupts, watchdog, analog converter, clock options, and electrical characteristics. Use the package-specific pin information to assign PCB connections.
Where can I find the ATTINY26L-8PJ pinout?
The ATTINY26L-8PJ pinout should be taken from the pin-description and package drawings in the Microchip ATtiny26 Summary Datasheet. The device uses a 20-pin PDIP package, with the notch or dimple identifying pin 1. Assign every power, ground, reset, clock, programming, analog, and I/O connection from the package drawing rather than relying on a generic DIP pinout.
Can ATTINY26L-8PI replace ATTINY26L-8PJ?
The ATTINY26L-8PI is the closest documented drop-in candidate for the ATTINY26L-8PJ because both are identified as 8 MHz, 2 KB Flash, 128-byte EEPROM, 128-byte SRAM ATtiny26L devices in 20-pin PDIP packages. The ordering codes differ, so engineers should confirm the temperature grade, qualification level, marking, and sourcing requirements before approving it as a production substitute.
What is the best drop-in replacement for ATTINY26L-8PJ?
The ATTINY26L-8PI is the best supported drop-in candidate because it shares the ATTINY26L-8PJ's 20-pin PDIP format and the same listed 8 MHz clock and memory configuration. Exact temperature-grade and qualification details are not stated in the available product summaries, so a substitute must be checked against the complete Microchip datasheet, programmed-device behavior, and application requirements before use.
What can replace ATTINY26L-8PJ?
ATTINY26L-8PI can serve as a candidate replacement because it matches the ATTINY26L-8PJ's 20-pin PDIP package, 8 MHz clock, 2 KB Flash, 128-byte EEPROM, and 128-byte SRAM. No fully documented cross-brand, pin-to-pin equivalent was identified in the available cross-reference results. The closest family member should therefore be validated against the complete datasheet and the target application's qualification requirements.
Is ATTINY26L-8PJ the same as ATTINY26L-8PU?
No, the ATTINY26L-8PJ and ATTINY26L-8PU belong to the same ATtiny26L family and share the listed 8 MHz, 2 KB Flash, 128-byte EEPROM, and 128-byte SRAM configuration, but they use different packages. The ATTINY26L-8PJ is specified as a 20-pin PDIP, while the ATTINY26L-8PU uses the surface-mount package associated with its ordering code, so it is not a no-PCB-change drop-in replacement.
When should I choose ATTINY26L-8PJ over another small AVR microcontroller?
Choose the ATTINY26L-8PJ when a compact 20-pin PDIP controller must combine an 8 MHz AVR core with 2 KB Flash, 128 bytes of EEPROM, 128 bytes of SRAM, PWM, and an 11-channel 10-bit ADC. A larger or faster device may be preferable for intensive processing or extensive memory, but the ATTINY26L-8PJ can reduce peripheral count in small sensor, monitoring, and low-power control products.
Is ATTINY26L-8PJ suitable for battery-powered sensor nodes?
The ATTINY26L-8PJ is suitable for compact battery-powered sensor nodes because it belongs to the low-power ATtiny26L family and operates from 2.7 V to 5.5 V. Its 10-bit ADC can read up to 11 channels, while EEPROM can retain calibration values. Actual battery life depends on the selected oscillator, sleep-mode implementation, ADC duty cycle, and peripheral standby current.
What is the ADC capability of ATTINY26L-8PJ?
The ATTINY26L-8PJ includes an 11-channel, 10-bit analog-to-digital converter with two differential voltage input gain stages. According to the Microchip ATtiny26 Summary Datasheet, this converter supports sensor and analog-control designs without requiring a separate ADC. The application should still include suitable input conditioning, reference stability, and grounding to obtain repeatable measurements.
Where can I buy ATTINY26L-8PJ online?
The ATTINY26L-8PJ can be requested through the Request a Quote form on this page, which is the appropriate channel for current availability, order quantity, lead time, and exact-package sourcing. Provide the complete ATTINY26L-8PJ ordering code when requesting a quotation and confirm that the delivered component is the 20-pin PDIP configuration rather than a family member with a different package suffix.
What is the lead time for ATTINY26L-8PJ?
Lead time and current inventory for ATTINY26L-8PJ should be requested through the Request a Quote form on this page. Because ordering-code availability can differ from generic ATtiny26L inventory, the quotation should identify the exact 20-pin PDIP part number and required production quantity. This allows scheduling and packaging decisions to be based on the current manufacturer and channel response.
Is ATTINY26L-8PJ RoHS compliant?
The ATTINY26L-8PJ is listed as RoHS compliant in its product-listing summary. Other environmental declarations, including REACH status, halogen-free status, conflict-minerals reporting, and automotive qualification, are not established by that summary and remain unknown for this product. Use the manufacturer's current compliance documentation for formal procurement or certification requirements.

工程参考数据: ATTINY26L-8PJ ——对比、设计指导和合规信息。

选型指南

Choose the ATTINY26L-8PJ when the design needs an 8 MHz 8-bit AVR controller, 2 KB Flash, 128 bytes of EEPROM, 128 bytes of SRAM, PWM, and an 11-channel 10-bit ADC in a through-hole 20-pin PDIP package. Its small memory footprint favors focused sensing, monitoring, lighting, and control tasks rather than communications-heavy or highly interactive systems. ATTINY26L-8PI is the closest documented same-package candidate when its ordering-code and qualification details are acceptable. Choose ATTINY26L-8PU, ATTINY26L-8SU, or ATTINY26L-8PC for new surface-mount designs, but treat them as footprint changes rather than PCB drop-in replacements. Always verify the operating-temperature range, programming method, pin configuration, analog limits, and lifecycle status in the complete Microchip documentation before production release.

与替代料对比

参数 本产品 ATTINY26L-8PI
Package 20-pin PDIP 20-pin PDIP - same
Brand Microchip Technology Microchip Technology
CPU Architecture 8-bit AVR enhanced RISC 8-bit AVR enhanced RISC
Maximum Clock Frequency 8 MHz 8 MHz
Flash Memory 2 KB (1K x 16 bits) 2 KB (1K x 16 bits)
EEPROM Memory 128 bytes 128 bytes
SRAM 128 bytes 128 bytes
ADC 11 channels, 10 bits 11 channels, 10 bits
Operating Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V
General-Purpose I/O Lines Up to 16 lines Up to 16 lines

关键差异点

  • Combines an 11-channel 10-bit ADC with two differential gain stages (对比 ATTINY26L-8PU)
  • Supports up to 16 I/O lines in a compact 20-pin package (对比 ATTINY26L-8PI)
  • Provides 128 bytes of EEPROM and 128 bytes of SRAM for local control (对比 ATTINY26L-8SU)
  • Delivers two 8-bit timers, including a PWM-capable timer (对比 ATTINY26L-8PC)

设计说明

Place the supply bypass capacitor close to the device power pins and provide a low-impedance ground return for the analog converter. The 2.7 V to 5.5 V operating range does not remove the need for clean supply distribution, especially when an ADC input shares the board with digital switching circuitry. Route analog inputs away from PWM outputs and clock signals, and use the package drawing and pin-description table in the manufacturer datasheet for every assignment.

Calculate average and peak supply demand before selecting the regulator and wiring. The 8 MHz operating point and repeated ADC conversions can increase dynamic demand even though the ATtiny26L family is designed for low-power embedded operation. Use the sleep-mode and oscillator options described in the Microchip ATtiny26 Summary Datasheet, and measure the completed board when battery life or thermal performance is critical.

Keep the 11-channel 10-bit ADC interface physically compact and reference its ground to the analog return rather than routing it beneath digital signals. Differential inputs can improve noise rejection when both sources share suitable common-mode and gain conditions. Add input filtering where required, avoid routing analog inputs beside PWM or high-current outputs, and validate offset, gain, and noise performance on the final layout.

Do not substitute an ATtiny26L ordering code solely because the core speed and memory match. Package suffix changes can alter the physical footprint, and temperature-grade or qualification distinctions are not characterized in the listing summaries. Confirm the complete ordering code, 20-pin PDIP footprint, operating-temperature requirement, programmed-device compatibility, and lifecycle status in the Microchip documentation before approving a replacement.

合规信息

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The product listing identifies the exact ATTINY26L-8PJ as RoHS compliant. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration is established for this exact ordering code.

数据核验日期: 2026-11-14 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

attiny26l 8su datasheet attiny26l pinout attiny26l datasheet attiny26l 8pu datasheet atmel attiny26l ATTINY26L-8PJ datasheet pdf ATTINY26L-8PJ pinout ATTINY26L-8PJ equivalent ATTINY26L-8PJ replacement ATTINY26L-8PJ cross reference ATTINY26L-8PJ vs ATTINY26L-8PI ATTINY26L-8PJ price ATTINY26L-8PJ footprint Microchip ATTINY26L-8PJ

相关元器件 & 术语

Microchip Technology Atmel ATTINY26L-8PJ ATTINY26L-8PI ATTINY26L-8PU ATTINY26L-8SU ATTINY26L-8PC ATtiny26L AVR enhanced RISC architecture 8-bit microcontroller embedded microcontroller semiconductor 10-bit analog-to-digital converter pulse-width modulation programmable watchdog timer EEPROM Flash memory SRAM 20-pin PDIP DIP package family through-hole surface mount alternative industrial sensor node battery-powered monitoring LED lighting control
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情