ATTINY26L-8PJ - 8MHz AVR MCU with ADC | Microchip Technology
MPN: ATTINY26L-8PJ ✓ פעילATTINY26L-8PJ סקירה
An AVR microcontroller is a compact embedded-control device that combines a CPU core, programmable memory, digital I/O, timers, interrupts, and analog conversion on one integrated circuit. The ATtiny26L belongs to Microchip's low-power AVR family, where low-dropout operation supports portable and battery-powered equipment. Its instruction architecture executes many instructions within a small number of clock cycles, while internal and external oscillator options give designers flexibility in clock selection and system timing.
Core features include 32 general-purpose working registers, two 8-bit timer/counter blocks, one timer with PWM outputs, internal and external interrupts, and a programmable watchdog timer. The 10-bit ADC supports 11 input channels, allowing multiple analog sensors to share one peripheral. Its 2 KB Flash capacity stores 1K by 16 bits of program memory, while 128 bytes of EEPROM preserve small quantities of nonvolatile configuration data and 128 bytes of SRAM support working variables.
The ATTINY26L-8PJ is useful when a design needs more analog measurement capability than a basic digital controller but not the memory or peripheral complexity of a larger microcontroller. It combines an 8 MHz clock with a low-power AVR architecture and operates across a 2.7 V to 5.5 V supply range. The microcontroller can use its internal oscillator or an external clock source, making it suitable for products where minimizing external components is valuable.
Typical uses include compact industrial sensor nodes, low-power battery-operated instruments, analog monitoring modules, lighting controls, teaching platforms, and small embedded-control products. In these applications, the ADC and PWM resources can reduce the need for separate analog and timing components, while EEPROM preserves calibration values or user settings between power cycles.
PCB design should provide a stable supply rail and follow the decoupling and grounding guidance in the Microchip ATtiny26 Summary Datasheet. Keep the analog input traces compact, isolate sensitive analog nodes from switching and high-current paths, and verify reset, clock, programming, and unused-pin arrangements before releasing a production layout.
This product page combines the verified device specifications with practical application guidance, package information, sourcing instructions, and a cautious drop-in replacement assessment. It highlights where the ATTINY26L-8PJ fits compact embedded systems and where engineers must validate timing, analog performance, programming compatibility, and lifecycle requirements before substitution.
חלופות תחליף ישיר עבור ATTINY26L-8PJ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
ATTINY26L-8PI
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ATTINY26L-8PJ דירוגים מרביים ומאפיינים חשמליים
| CPU Architecture | 8-bit AVR enhanced RISC |
| תדר שעון מקסימלי | 8 MHz |
| Flash Memory | 2 KB (1K x 16 bits) |
| EEPROM Memory | 128 bytes |
| SRAM | 128 bytes |
| General-Purpose I/O Lines | Up to 16 lines |
| General-Purpose Working Registers | 32 registers |
| Timer/Counters | 2 timer/counter blocks |
| PWM Channels | 1 timer with PWM outputs |
| ADC Resolution | 10 bits |
| ADC Input Channels | 11 channels |
| Differential Analog Input Gain Stages | 2 stages |
| Operating Voltage Range | 2.7 V to 5.5 V |
| Oscillator Options | Internal and external oscillators |
| Interrupt Sources | Internal and external interrupts |
| Watchdog Timer | Programmable watchdog timer |
| מארז | 20-pin PDIP |
| סוג הרכבה | Through-hole |
| סטטוס RoHS | Compliant |
מדריך תצורת פינים של ATTINY26L-8PJ 20-pin pdip
תצורת פינים עבור ATTINY26L-8PJ (מארזת 20-pin pdip). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.
אין נתוני פריסת פינים מפורטים עבור ATTINY26L-8PJ.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
ATTINY26L-8PJ מתאים עבור 6 יישוםs: Industrial Sensor Node, Battery-Powered Monitoring Device, LED Lighting Controller, Analog Control Interface, Educational Microcontroller Platform, Small Embedded Control Board.
Industrial Sensor Node
The ATTINY26L-8PJ fits compact industrial sensor nodes because its 11-channel, 10-bit ADC can monitor several analog inputs while the 8 MHz AVR core performs local filtering and control. The 128-byte EEPROM is useful for retaining calibration coefficients or operating thresholds between power cycles, and the 2 KB Flash supports a focused application rather than a general-purpose control platform. With a 2.7 V to 5.5 V supply range, the controller can operate directly from 3.3 V or 5 V industrial rails. Keep analog traces short and place filtering components near their associated inputs to limit pickup from switching nodes.
מומלץ
Battery-Powered Monitoring Device
The low-power ATtiny26L architecture makes the ATTINY26L-8PJ appropriate for battery-powered monitoring devices where a small 8-bit controller must measure and act on a limited number of inputs. Its 10-bit ADC supports threshold-based sensing, while internal oscillator options can reduce component count. The 2 KB Flash and 128-byte SRAM are sufficient for compact acquisition and control loops rather than heavy buffering. System endurance depends on sleep-mode design, ADC conversion frequency, and whether the external watchdog or internal timer supervises operation.
מומלץ
LED Lighting Controller
The ATTINY26L-8PJ can control compact LED lighting systems where PWM timing, local button input, and current sensing are required without a larger control platform. One of its two 8-bit timer/counters supports PWM outputs, allowing software-defined dimming or indication patterns, while the remaining I/O can interface with switches and drivers. The 2 KB Flash is appropriate for compact lighting sequences and configuration logic. Confirm the LED driver's voltage and input thresholds before connecting a 2.7 V to 5.5 V controller directly to a higher-voltage power stage.
מומלץ
Analog Control Interface
The ATTINY26L-8PJ is suited to analog control interfaces that combine sensor acquisition with supervisory logic. Its 11-channel, 10-bit ADC and two differential input gain stages provide multiple measurement paths, while 32 working registers help organize control calculations in an 8-bit architecture. PWM can generate a simple actuator command or excitation signal when a more precise fixed-period control output is not required. Use separate analog and digital grounding techniques, and confirm the complete electrical limits in the Microchip ATtiny26 Summary Datasheet before selecting input ranges.
מומלץ
Educational Microcontroller Platform
The ATTINY26L-8PJ works well in educational microcontroller platforms because it combines an accessible 8-bit AVR core, 2 KB Flash, EEPROM, PWM, timers, interrupts, and an 11-channel 10-bit ADC in a 20-pin PDIP package. Through-hole construction makes it straightforward to prototype on a breadboard or perforated board. Students can exercise ADC acquisition, timer interrupts, PWM generation, nonvolatile parameter storage, and low-power design without requiring a larger development kit. A 2.7 V to 5.5 V operating range also supports common classroom supply arrangements.
מומלץ
Small Embedded Control Board
The ATTINY26L-8PJ is appropriate for a small embedded control board that needs local logic, one or more analog measurements, and programmable timing. The 8 MHz AVR core provides ample throughput for state machines and simple control algorithms, while two timer/counter blocks support timing and PWM tasks. With up to 16 I/O lines, the device can connect buttons, displays, and external logic, although memory limits make careful firmware and peripheral allocation important. A focused product with stable 3.3 V or 5 V power can use the device without a larger microcontroller family.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור ATTINY26L-8PJ — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | ATTINY26L-8PI |
|---|---|---|
| Package | 20-pin PDIP | 20-pin PDIP - same |
| Brand | Microchip Technology | Microchip Technology |
| CPU Architecture | 8-bit AVR enhanced RISC | 8-bit AVR enhanced RISC |
| Maximum Clock Frequency | 8 MHz | 8 MHz |
| Flash Memory | 2 KB (1K x 16 bits) | 2 KB (1K x 16 bits) |
| EEPROM Memory | 128 bytes | 128 bytes |
| SRAM | 128 bytes | 128 bytes |
| ADC | 11 channels, 10 bits | 11 channels, 10 bits |
| Operating Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| General-Purpose I/O Lines | Up to 16 lines | Up to 16 lines |
מבדילים עיקריים
- Combines an 11-channel 10-bit ADC with two differential gain stages (לעומתATTINY26L-8PU)
- Supports up to 16 I/O lines in a compact 20-pin package (לעומתATTINY26L-8PI)
- Provides 128 bytes of EEPROM and 128 bytes of SRAM for local control (לעומתATTINY26L-8SU)
- Delivers two 8-bit timers, including a PWM-capable timer (לעומתATTINY26L-8PC)
הערות תכנון
Place the supply bypass capacitor close to the device power pins and provide a low-impedance ground return for the analog converter. The 2.7 V to 5.5 V operating range does not remove the need for clean supply distribution, especially when an ADC input shares the board with digital switching circuitry. Route analog inputs away from PWM outputs and clock signals, and use the package drawing and pin-description table in the manufacturer datasheet for every assignment.
Calculate average and peak supply demand before selecting the regulator and wiring. The 8 MHz operating point and repeated ADC conversions can increase dynamic demand even though the ATtiny26L family is designed for low-power embedded operation. Use the sleep-mode and oscillator options described in the Microchip ATtiny26 Summary Datasheet, and measure the completed board when battery life or thermal performance is critical.
Keep the 11-channel 10-bit ADC interface physically compact and reference its ground to the analog return rather than routing it beneath digital signals. Differential inputs can improve noise rejection when both sources share suitable common-mode and gain conditions. Add input filtering where required, avoid routing analog inputs beside PWM or high-current outputs, and validate offset, gain, and noise performance on the final layout.
Do not substitute an ATtiny26L ordering code solely because the core speed and memory match. Package suffix changes can alter the physical footprint, and temperature-grade or qualification distinctions are not characterized in the listing summaries. Confirm the complete ordering code, 20-pin PDIP footprint, operating-temperature requirement, programmed-device compatibility, and lifecycle status in the Microchip documentation before approving a replacement.
מידע על תאימות
The product listing identifies the exact ATTINY26L-8PJ as RoHS compliant. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration is established for this exact ordering code.