C8051F411-GM - 50MHz 8-Bit 32KB Flash MCU | Silicon Labs
料号: C8051F411-GM ✓ 量产中C8051F411-GM 概述
An 8-bit Flash microcontroller is a programmable semiconductor that combines a CPU core, nonvolatile program memory, RAM, peripherals, and communication interfaces on one device. The C8051F41x family belongs to the broader 8051 embedded-controller hierarchy, combining legacy-compatible instruction-set heritage with modern mixed-signal peripherals. This makes it suitable for control systems that need accurate analog measurements, programmable analog outputs, and deterministic embedded processing in a compact surface-mount package.
The C8051F411-GM reaches up to 50 MIPS through its high-speed pipelined 8051-compatible core. Its 32 kB Flash supports firmware storage, while 2.25 kB of RAM handles working data. The integrated 12-bit, 24-channel ADC supports precision sensor acquisition, and the two-channel 12-bit DAC provides programmable analog output. Four 16-bit timers support periodic events, capture functions, timing, and motor or signal-generation tasks.
Mixed-signal integration reduces the need for external converters and support circuitry. The on-chip Power-On Reset and VDD monitor improve startup behavior, while the real-time clock provides timekeeping without relying entirely on software timing loops. Communication interfaces expand the device’s usefulness for connected industrial, consumer, and instrumentation systems, although the exact available interface count and electrical limits should be confirmed in the manufacturer datasheet before final schematic release.
Typical applications include industrial sensor controllers, data-acquisition modules, programmable analog instruments, building-control endpoints, compact motor controllers, and consumer products requiring both digital control and analog I/O. The 28-QFN footprint supports high-density layouts, but its exposed-pad thermal requirements and fine-pitch routing demand careful PCB planning. Software users should evaluate the Silicon Labs C51 development environment, device headers, initialization files, and peripheral configuration utilities associated with the C8051F41x family.
For a new design, verify the selected voltage range, oscillator configuration, ADC acquisition requirements, and communications resources against the exact ordering information. Place decoupling capacitors close to the supply pins, maintain uninterrupted ground-plane continuity beneath the device, and route the exposed pad with the thermal-via pattern specified by the manufacturer. Because the MCU combines analog and digital functions, partition noisy switching paths away from precision analog inputs and validate the completed board with mixed-signal measurements.
This page combines manufacturer specifications, package details, sourcing information, same-family drop-in candidates, comparison parameters, and practical PCB guidance into one engineering-focused reference. It is designed to help developers identify the C8051F411-GM quickly, assess its mixed-signal capabilities, plan a compact 28-QFN layout, and select a technically appropriate replacement without confusing electrical equivalence with simple catalog similarity.
直接替换替代料: C8051F411-GM ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: C8051F411-GM (相同外形与封装尺寸) ——差异在于 Package, Power-On Reset, Product Type.
C8051F413-GM
✅ 直接替换联系询价
查看数据手册 →C8051F412-GM
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
C8051F414-GM
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
C8051F415-GM
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
C8051F410-GM
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
C8051F411-GM 最大额定值与电气特性
| Product Type | Mixed-signal 8-bit Flash microcontroller |
| Core | 8051-compatible pipelined core |
| 最大时钟频率 | 50 MHz |
| Maximum Performance | 50 MIPS |
| Program Memory | 32 kB Flash (32K x 8) |
| RAM | 2.25 kB |
| ADC Resolution | 12 bits |
| ADC Channel Count | 24 channels |
| DAC Resolution | 12 bits |
| DAC Channel Count | 2 channels |
| Comparator Count | 2 |
| Timer Count | 4 x 16-bit timers |
| Real-Time Clock | On-chip smaRTClock |
| 电源电压 | 2.0 V nominal; 3.3 V or 5 V device variants identified |
| 封装 | 28-pin QFN, 5 mm x 5 mm |
| 安装类型 | Surface mount |
| Power-On Reset | On-chip |
| Supply Monitor | On-chip VDD monitor |
C8051F411-GM 28-pin qfn, 5 mm x 5 mm 引脚配置指南
C8051F411-GM(28-pin qfn, 5 mm x 5 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: C8051F411-GM.
请参阅 数据手册 以查看完整引脚配置。
典型应用
C8051F411-GM 适用于 6 应用s: Industrial Sensor Acquisition, Programmable Analog Control, Building Automation Endpoint, Data Acquisition Module, Compact Motor Controller, Consumer Connectivity Controller.
Industrial Sensor Acquisition
The C8051F411-GM fits industrial sensor modules that must acquire multiple analog inputs and perform local control without relying on a separate processor. Its 12-bit, 24-channel ADC supplies the conversion interface, while the 50 MIPS core supports filtering, calibration, threshold decisions, and data formatting. The 32 kB Flash provides more program space than a 16 kB C8051F413-GM design, making it useful when acquisition routines and communications occupy substantial firmware. Place analog inputs away from switching nodes, use a stable reference arrangement, and route the QFN exposed pad through the manufacturer’s thermal-via pattern.
推荐
Programmable Analog Control
The C8051F411-GM is appropriate for closed-loop analog control because it combines two 12-bit DAC channels, two comparators, a 12-bit ADC, and four 16-bit timers in one 5 mm by 5 mm QFN device. The processor can generate control waveforms, compare a feedback voltage, update a DAC output, and log operating states through the same hardware. Its 50 MHz execution rate provides substantial timing margin for digital filtering and control-loop calculations. Keep the analog reference and signal paths short, provide suitable output buffering where required, and validate loop stability with representative loads rather than only open-loop bench conditions.
推荐
Building Automation Endpoint
A C8051F411-GM-based building-control endpoint can monitor analog environmental sensors, evaluate thresholds, operate actuator outputs, and maintain real-time schedules from a compact controller. Its four 16-bit timers are useful for periodic sampling, debounce timing, pulse measurement, and control updates, while the integrated real-time clock improves timestamp consistency. The 32 kB Flash capacity leaves room for communication stacks and application logic compared with the 16 kB C8051F413-GM. For reliable wall-mounted equipment, isolate field wiring from the MCU, use robust ESD protection, and provide clean power filtering before the device supply pins.
推荐
Data Acquisition Module
The C8051F411-GM can serve as the local controller in a compact data-acquisition module because it integrates a 12-bit ADC, 32 kB Flash, 2.25 kB RAM, and a high-performance 8-bit core. Firmware can schedule conversions, perform basic digital filtering, transfer samples through an available serial interface, and maintain calibration parameters without an external converter. Its 50 MIPS rate allows useful computation around each conversion, although sustained system accuracy depends on analog front-end design. Use low-noise references, protect high-impedance sensor inputs, and keep digital clock and switching paths separated from the ADC traces.
推荐
Compact Motor Controller
The C8051F411-GM can support compact motor-control and actuator designs where four 16-bit timers, fast GPIO control, ADC feedback, and programmable DAC outputs must coexist in a small package. The timers can generate precise timing events or capture input transitions, while the 50 MIPS core executes commutation, current-reference, or position-control logic. The 28-QFN footprint helps reduce board area but concentrates thermal and routing demands around the exposed pad. Use isolated gate-drive circuitry rather than driving motor power directly, and validate motor transients, ground return paths, and analog measurements under the worst operating load.
推荐
Consumer Connectivity Controller
The C8051F411-GM can act as the supervisory controller in a connected consumer product that needs local analog control in addition to digital communications. Its 32 kB Flash supports a larger application layer than the 16 kB C8051F413-GM, while its timers and mixed-signal peripherals can handle buttons, indicators, sensors, and actuator feedback. The 50 MHz core is suitable for protocol handling and real-time peripheral coordination. Separate communication-interface routing from sensitive analog inputs, include appropriate ESD and surge protection at external connectors, and confirm each available communication peripheral and its alternate pin function in the exact package pin table.
推荐
推荐产品汇总
工程参考数据: C8051F411-GM ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | C8051F413-GM | C8051F412-GM | C8051F414-GM | C8051F415-GM | C8051F410-GM |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | QFN-28 (5x5 mm) | QFN-28 (5x5 mm) | QFN-28 (5x5 mm) | QFN-28 (5x5 mm) | QFN-28 (5x5 mm) | QFN-28 (5x5 mm) |
关键差异点
- Twice the Flash capacity of the web-confirmed C8051F413-GM alternative (对比 C8051F413-GM)
- 50 MHz processing performance within the same C8051F41x architecture (对比 C8051F412-GM)
- Full mixed-signal integration in a 5 mm by 5 mm footprint (对比 C8051F414-GM)
设计说明
Treat the 28-QFN as a fine-pitch mixed-signal layout. Place all decoupling capacitors immediately beside the relevant supply pins, maintain a continuous ground plane, and connect the exposed thermal pad to ground using the manufacturer’s via pattern. Confirm pad geometry against the current package drawing. Avoid routing ADC inputs beneath digital clock lines or isolated power-regulator switching nodes, and provide a direct return path for every analog source.
The 12-bit ADC can resolve 12-bit codes, but practical measurement accuracy depends on the analog front end and reference. Use short traces, controlled source impedance, suitable anti-alias filtering, and a stable reference arrangement. Keep the 50 MHz digital activity away from sensitive analog inputs, and validate input settling at the selected sample rate. If the source has high output impedance, include an appropriate buffer rather than relying on the microcontroller pin alone.
Decouple each supply domain at the device pins and verify startup behavior with the internal power-on reset and VDD monitor enabled as required by the application. The exact voltage limits, regulator sequencing, and required external network must be taken from the manufacturer datasheet. Because the MCU combines switching digital logic with sensitive analog converters, use a quiet analog supply branch where possible and confirm that supply droop during processor activity does not disturb measurements.
合规信息
Compliance status was not stated in the indexed manufacturer and distributor material. AEC-Q100 is not applicable because the C8051F411-GM is an industrial mixed-signal microcontroller rather than an automotive-qualified device.