C8051F813-GU - 25MHz 8-Bit Flash MCU | Silicon Labs
料号: C8051F813-GU ✗ 停产C8051F813-GU 概述
An 8051 microcontroller is an embedded 8-bit processor architecture used to read sensors, operate user interfaces, control actuators, and manage communication tasks. Its 8051 instruction set sits within the broader hierarchy of microcontrollers, embedded processors, and semiconductor integrated circuits. The C8051F81x family is designed for cost-sensitive embedded products that require flash programmability, mixed-signal peripherals, and a compact package.
Key features include an 8 KB flash program memory organized as 8K × 8, 512 bytes of internal RAM, 17 general-purpose I/O pins, and an internal oscillator. The capacitive-touch capability supports buttons, sliders, and wheels. The manufacturer lists the C8051F813-GU as an 8051 C8051F81x microcontroller with a 25 MHz clock and a 24-QSOP package.
The C8051F81x core uses a pipelined instruction architecture and can execute approximately 70% of its instructions within a single cycle. Flash memory permits in-system reprogramming, while RAM supports working variables, stack operations, and peripheral data handling. The mixed-signal feature set makes the MCU suitable for products requiring analog measurement or touch sensing in addition to conventional digital control.
Typical applications include capacitive control panels, small appliance controllers, industrial interface modules, compact instrumentation, and embedded user-interface boards. Designers can use the touch peripherals to reduce mechanical switch count, while the 8051 core handles debouncing, state logic, display updates, and communication with external sensors.
Board design should preserve the manufacturer's recommended oscillator, decoupling, programming-interface, and analog-input layouts. A 3 V operating design is indicated by the family data, but engineers should confirm voltage limits, pin multiplexing, touch-channel assignments, and peripheral availability in the Silicon Labs datasheet before releasing the PCB.
This page combines exact catalog identification, package and memory details, drop-in-family comparison, application guidance, and practical design notes to support component selection and PCB planning without treating a family member as interchangeable unless its pin and peripheral functions are verified.
直接替换替代料: C8051F813-GU ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: C8051F813-GU (相同外形与封装尺寸) ——差异在于 Capacitive Touch Support, Core Architecture, Number of I/O Pins, Package, RAM Size.
C8051F812-GU
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
C8051F814-GU
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →C8051F801-GU
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
C8051F802-GU
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
C8051F800-GU
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
C8051F813-GU 最大额定值与电气特性
| Product Type | 8-bit mixed-signal flash microcontroller |
| CPU Architecture | 8051 |
| CPU Bit Width | 8 bit |
| 最大时钟频率 | 25 MHz |
| Program Memory Size | 8 KB (8K × 8) flash |
| RAM Size | 512 × 8 bit |
| Number of I/O Pins | 17 pins |
| Supply Voltage Range | 1.8 V to 3.6 V |
| Oscillator Type | Internal |
| Capacitive Touch Support | Supported for buttons, sliders, and wheels |
| Core Architecture | Pipelined 8051 |
| Single-Cycle Instruction Execution | Approximately 70% of instructions |
| 封装 | 24-QSOP, 3.90 mm nominal body width |
| 安装类型 | Surface mount |
| 引脚数量 | 24 pins |
C8051F813-GU 24-qsop, 3.90 mm nominal body width 引脚配置指南
C8051F813-GU(24-qsop, 3.90 mm nominal body width 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: C8051F813-GU.
请参阅 数据手册 以查看完整引脚配置。
典型应用
C8051F813-GU 适用于 6 应用s: Capacitive Control Panels, Small Appliance Controls, Industrial Interface Modules, Battery-Powered Portable Devices, Compact Instrumentation, Programmable Embedded Controls.
Capacitive Control Panels
The C8051F813-GU is suitable for compact capacitive-control panels because it combines capacitive-touch support for buttons, sliders, and wheels with a 25 MHz 8051 core and 17 I/O pins. The 8 KB flash stores panel logic, calibration data, and interface state, while 512 bytes of RAM supports debouncing, filtering, and event handling. Place the touch electrodes on a separate, carefully controlled PCB region and use the manufacturer’s recommended grounding and filtering techniques. Compared with a mechanical-switch design, this arrangement can reduce panel depth and wiring while adding configurable touch behavior.
推荐
Small Appliance Controls
The C8051F813-GU can manage the user interface and control logic of a small appliance within a 24-QSOP footprint. Its 25 MHz pipelined 8051 core provides responsive handling of capacitive controls, operating-state logic, and external sensors, while 17 I/O pins connect buttons, indicators, relays, or display-control signals. The 8 KB program flash is appropriate for compact embedded firmware, and the 512-byte RAM supports working variables and stack operations. Because the device operates from 1.8 V to 3.6 V, the power architecture must provide a regulated low-voltage rail.
推荐
Industrial Interface Modules
The C8051F813-GU fits compact industrial interface modules that must translate sensor inputs into digital control commands. Its 17 I/O pins can serve external digital devices, the 25 MHz 8051 core can execute protocol and state-machine routines, and the internal oscillator simplifies the clock design when exact external timing is unnecessary. The 8 KB flash and 512-byte RAM are suitable for lightweight protocol stacks and local configuration. Industrial designs should verify operating-temperature limits, isolation requirements, ESD protection, and all peripheral specifications before using the MCU outside a benign environment.
推荐
Battery-Powered Portable Devices
The 1.8 V to 3.6 V operating range makes the C8051F813-GU relevant to compact battery-powered equipment. Its internal oscillator can reduce the external clock component count in applications that do not require high-precision timing, while the 25 MHz core provides ample control throughput for sensor polling, touch updates, and low-rate communications. The 8 KB flash footprint supports small firmware images, and 512 bytes of RAM constrains buffering, so the design should avoid large local data arrays. Power consumption under sleep and active modes must be checked in the manufacturer’s electrical data before estimating battery life.
推荐
Compact Instrumentation
The C8051F813-GU can serve as the local controller in compact measurement instruments that combine capacitive sensing, digital controls, and limited data processing. Its mixed-signal orientation and 17 I/O pins allow touch electrodes and external switches to coexist in one design, while the pipelined 8051 core handles acquisition sequencing and display logic. The 8 KB flash and 512-byte RAM make careful firmware sizing important, especially when buffering samples. Analog input ranges, ADC resolution, reference accuracy, and channel count must be confirmed for the selected C8051F81x device before defining sensor front ends.
推荐
Programmable Embedded Controls
The C8051F813-GU is useful in legacy or product-specific embedded controllers where flash programmability, an established 8051 toolchain, and a compact pin count matter more than a modern high-RAM architecture. Its 8 KB flash stores application code, the 25 MHz core executes real-time control tasks, and 17 I/O pins support sensors, relays, and status indicators. The mixed-signal and capacitive-touch features can simplify human-interface designs. Engineers should retain the original 8051 peripheral model, verify timing assumptions, and confirm that no required legacy interface has changed when moving to a related family member.
推荐
推荐产品汇总
工程参考数据: C8051F813-GU ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | C8051F812-GU | C8051F814-GU | C8051F801-GU | C8051F802-GU | C8051F800-GU |
|---|---|---|---|---|---|---|
| Brand | Silicon Laboratories | Silicon Laboratories | Silicon Laboratories | Silicon Laboratories | Silicon Laboratories | Silicon Laboratories |
| Package | 24-QSOP | 24-QSOP | 24-QSOP | 24-QSOP | 24-QSOP | 24-QSOP |
| CPU Architecture | 8051, 8-bit | 8051, 8-bit | 8051, 8-bit | 8051, 8-bit | 8051, 8-bit | 8051, 8-bit |
| Maximum Clock Frequency | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 25 MHz |
| Core Instruction Timing | Pipelined; approximately 70% single-cycle execution | C8051F81x family | C8051F81x family | C8051F81x family | C8051F81x family | C8051F81x family |
关键差异点
- Compact capacitive-touch integration (对比 C8051F814-GU)
- Memory configuration aligned with compact firmware (对比 C8051F812-GU)
- Single 25 MHz pipelined 8051 platform (对比 C8051F801-GU)
- Low-voltage mixed-signal control in a narrow package (对比 C8051F800-GU)
设计说明
Route the 24-QSOP footprint with careful fan-out because the package is only 3.90 mm wide. Place required bypass capacitors adjacent to the device power pins, preserve the manufacturer's ground-reference geometry, and avoid placing test pads or long copper features beneath sensitive analog and capacitive-touch nodes. Check the package drawing for pin numbering and lead orientation rather than relying on a generic SSOP footprint.
Separate touch electrodes from switching regulators, relays, high-current LED drivers, and fast-edge digital nets. Follow the manufacturer's recommended electrode shape, spacing, guard structure, and reference grounding. Touch performance depends on stable ground reference, controlled copper around the sensor, and appropriate firmware filtering and calibration; a physically crowded panel can undermine otherwise valid peripheral settings.
Design the supply for the documented 1.8 V to 3.6 V operating range, including startup and transient behavior. Verify each power domain, regulator dropout, load current, and external peripheral requirement against the device's electrical limits. Place decoupling components close to their intended pins, and avoid routing high-current return paths through the ground area associated with analog or touch measurements.
Do not assume that all C8051F81x 24-QSOP devices are interchangeable. Compare pin names, alternate functions, memory sizes, interrupt vectors, oscillator behavior, and peripheral registers before changing the component number. Also check firmware stack depth and RAM allocation: the C8051F813-GU has only 512 bytes of RAM, so a related device with different peripheral initialization or interrupt depth may require code changes.
合规信息
The current product listings do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm compliance and traceability with the manufacturer or the authorized supply channel for the exact legacy MPN.