最后一次采购通知: CD4020BEX 即将停产。最后下单日期: 联系我们. 查看可用的替代料号 →
Harris Corporation

CD4020BEX - 14-Stage CMOS Counter | Harris Corporation

料号: CD4020BEX ✗ 停产
16-pin dual in-line package (16DIP) Package
最小起订量: 1 |

CD4020BEX 概述

Harris Corporation CD4020BEX is a CMOS 14-stage ripple-carry binary counter and divider in a 16-pin dual in-line package. It provides 14 binary counting stages, an external clock input, reset control, and an oscillator section suitable for frequency division and timing applications.

A CMOS binary counter is a digital logic device that increments an internal binary count when triggered by an active clock edge. The CD4000 series belongs to the CMOS logic hierarchy, combining low static power consumption with wide supply-voltage tolerance. Counters in this family are commonly used to divide one frequency into lower clock or timing signals without requiring a programmable microcontroller.

The CD4020BEX provides a 14-stage counting section rather than the 16-stage architecture associated with some other binary-counter families. Its useful output stages support divide-by-two and higher division ratios. Because the output behavior is determined by the binary counter and oscillator stages, the device is suitable for pulse counting, frequency division, timing generation, and low-frequency clock derivation.

The ripple-counter implementation allows each stage to propagate a clock transition to the following stage. This structure provides straightforward division from the external clock while remaining suitable for applications where propagation delay between stages is not the principal constraint. An internal oscillator section can also be used for frequency generation, subject to the operating conditions and component recommendations in the manufacturer datasheet.

Typical uses include digital timing systems, industrial control counters, pulse-rate measurement, clock division, and periodic-event generation. The CD4020BEX is particularly appropriate for legacy equipment, repair assemblies, and new designs that specifically require the CD4020B architecture and the 16-pin DIP footprint.

When laying out the circuit, keep clock and reset traces short, maintain a common ground reference, and place any required timing or bypass capacitors close to their associated pins. Confirm supply-voltage limits, output-drive requirements, and maximum operating frequency against the manufacturer datasheet before using the counter in high-speed or safety-related systems.

This product page combines the functional description, package details, sourcing options, comparison guidance, and application-oriented design considerations needed to evaluate the CD4020BEX for a new PCB or an existing DIP-16 assembly.

直接替换替代料: CD4020BEX ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: CD4020BEX (相同外形与封装尺寸) ——差异在于 Logic Family.

Texas Instruments
Logic Family: CMOS
对比 CD4020BEX →

CD4020BE

✅ 直接替换
Texas Instruments
📦 16DIP
Binary ripple-carry counter and divider · CMOS · 1 element · 14 stages · Negative edge · CP · Active-high master reset · 12 outputs

联系询价

查看数据手册 →

CD4020BE

✅ 直接替换
Texas Instruments
📦 16DIP
Binary ripple-carry counter and divider · CMOS · 1 element · 14 stages · Negative edge · CP · Active-high master reset · 12 outputs

联系询价

查看数据手册 →

CD4020BEX 最大额定值与电气特性

Product Type CMOS 14-stage ripple-carry binary counter/divider
Logic Family CD4000 CMOS series
Counting Stages 14 stages
Counter Architecture Ripple-carry binary counter
封装 16-pin dual in-line package (16DIP)
引脚数量 16 pins
安装类型 Through-hole

CD4020BEX 16-pin dual in-line package (16dip) 引脚配置指南

CD4020BEX(16-pin dual in-line package (16dip) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

CD4020BEX 的 16-pin dual in-line package (16dip) 封装引脚图

暂无详细引脚数据: CD4020BEX.

请参阅 数据手册 以查看完整引脚配置。

典型应用

CD4020BEX 适用于 6 应用s: Pulse and Event Counting, Frequency Divider and Clock Generation, Industrial Timer and Retriggerable Interval, Timing Signal Generation, Legacy Equipment Repair, Digital Divider Control.

🏭

Pulse and Event Counting

The CD4020BEX is suitable for counting periodic input pulses when the target output rate can be produced by one of its 14 binary stages. Its ripple-carry architecture provides direct division of the incoming clock, allowing a system to derive a lower-rate event signal without a programmable controller. Because ripple counters accumulate propagation delay across stages, use the most suitable early output for timing-critical work. Confirm the maximum clock frequency and propagation delay in the manufacturer datasheet, and add conditioning when the source is a noisy sensor or mechanical switch.

⚡

Frequency Divider and Clock Generation

CD4020BEX can divide an input clock into lower binary frequencies, making it useful for timing blocks, sampling strobes, and periodic system-control signals. With 14 counter stages, the architecture offers multiple division points rather than a single fixed divide ratio. Select the output that meets the required frequency and timing relationship, and account for cumulative propagation delay when multiple stages are used in a cascade. The exact usable frequency range depends on supply voltage and package grade, so validate timing at the intended voltage and temperature.

🏭

Industrial Timer and Retriggerable Interval

The counter can establish repeatable timing intervals for industrial controllers by combining an incoming process pulse with the reset function and a selected divided output. This arrangement supports retriggerable monostable behavior or periodic control tasks in legacy automation equipment. Because the reset function and selected output stage determine the interval, verify the active reset level and timing sequence in the manufacturer pin-description table. Keep the clock net away from switching-power nodes and use a ground reference that remains stable with the surrounding relay and actuator circuits.

🔧

Timing Signal Generation

CD4020BEX can generate coarse timing signals from an oscillator or external clock, providing enable or strobe pulses for instrumentation and sequencing circuits. The on-chip oscillator section offers a simple way to establish a counting reference, while the external clock input permits a more controlled frequency source. Choose the counter output according to the required interval and ensure that propagation delay does not violate the system timing budget. For battery-powered equipment, confirm the quiescent current and oscillator start-up behavior from the exact device documentation before finalizing the power budget.

🔧

Legacy Equipment Repair

The 16DIP CD4020BEX format makes the device especially relevant to repairing or extending equipment designed around the original CD4020B architecture. A qualified CD4020BE alternative can preserve the board outline and logic function when its pin functions and electrical ratings match. Before installation, compare the clock, reset, oscillator, supply, and counter-output assignments and confirm the replacement's temperature and qualification requirements. A shared family name alone is not sufficient for approval; the manufacturer datasheet must support the substitution.

🖥️

Digital Divider Control

A CD4020BEX can divide a system clock into enable windows for multiplexers, sampling systems, or sequential control logic. Dividing the clock rather than executing software is useful when predictable hardware timing is required and the board already contains compatible CMOS logic. Choose the output stage to produce the required update interval and check that the divided edge remains valid for downstream devices. If the divider drives long traces or slow CMOS inputs, account for rise time, noise coupling, and the receiving device's input thresholds rather than relying only on nominal frequency values.

What is the operating voltage of CD4020BEX?
The CD4020BEX is a CD4000-series CMOS 14-stage ripple-carry binary counter and divider supplied in a 16-pin DIP package. According to the Texas Instruments CD4020B product page, the family is implemented in CMOS technology, but the exact CD4020BEX supply-voltage limits and operating temperature grade should be confirmed in the manufacturer datasheet before circuit design. The low static power and noise behavior of CMOS make the counter suitable for conventional low-power digital logic systems.
Where can I download the CD4020BEX datasheet PDF?
The official CD4020B product page is available from Texas Instruments at https://www.ti.com/product/CD4020B. It provides the family documentation, ordering information, parameters, and support resources for the CMOS 14-stage ripple-carry binary counter/divider. Because CD4020BEX is a legacy Harris-branded ordering code, use the family documentation and verify the package, temperature grade, and electrical limits for the exact CD4020BEX configuration before releasing a production BOM.
Where can I find the CD4020BEX pinout?
Use the pin-description table in the manufacturer CD4020B datasheet to assign the 16 DIP connections for clock, reset, supply, oscillator, and counter-output functions. The product listing identifies CD4020BEX as a 16DIP binary-counter device, while the exact signal-to-pin assignment is not printed in the product-page summary. Avoid assigning PCB tracks from memory because the reset input and oscillator pins must match the selected manufacturer configuration.
What is the best drop-in replacement for CD4020BEX?
CD4020BEX should be replaced with a CD4020B device in the same 16-pin DIP configuration and with compatible supply, timing, and temperature limits. Rochester Electronics CD4020BE is a documented 16DIP alternative, and Texas Instruments also produces the CD4020B family. A valid drop-in decision requires identical pin functions, equivalent voltage ratings, and acceptable clock propagation delay; confirm these details in the replacement manufacturer datasheet before substitution.
Can CD4020BE replace CD4020BEX?
CD4020BE can serve as a replacement when its 16-pin DIP pinout, voltage range, and timing characteristics match the CD4020BEX installation. Rochester Electronics lists CD4020BE as an IC binary counter in a 16DIP package. Because the exact suffix and manufacturer determine package, temperature grade, and qualification details, engineers should compare the official pin and electrical tables for CD4020BE and CD4020BEX rather than relying on the shared CD4020B family name.
Is CD4020BEX the same as CD4020B?
CD4020BEX is an orderable version of the CD4020B CMOS counter family, while CD4020B denotes the broader device family. The Harris-related product records identify CD4020BEX as a 14-bit binary counter in a 16DIP package. The distinction matters because ordering suffixes can identify package, temperature, or producer-specific qualification attributes, so the complete MPN must be checked against the required footprint and operating conditions.
What can replace CD4020BEX?
The most direct replacements are CD4020BE devices from manufacturers offering the 16-pin DIP version of the same counter architecture. Rochester Electronics CD4020BE is one documented option. A functional equivalent from another logic family may divide the same frequency but is not automatically a drop-in replacement because pin assignments, output count, voltage levels, and switching timing may differ. Use the manufacturer pin tables to approve any substitution.
Where can I buy CD4020BEX online?
Use the Request a Quote form on this page to request CD4020BEX availability, volume pricing, current lead time, and delivery options. Quote requests are the appropriate channel for this legacy counter because pricing and stock can change with market conditions. Provide the complete CD4020BEX ordering code and confirm whether tape-and-reel, tube, or other approved packaging is required for the production build.
What is the price of CD4020BEX?
Current CD4020BEX pricing is not shown as a static figure because legacy component prices can change with quantity, market conditions, and fulfillment requirements. Submit a Request a Quote on this page with the required quantity and delivery information to obtain the current unit quotation. For procurement records, retain the exact CD4020BEX ordering code because similar CD4020 family suffixes may represent different packages or qualification grades.
What is the lead time for CD4020BEX?
Lead time for CD4020BEX should be confirmed through the Request a Quote form on this page. Availability may depend on the exact manufacturer, package form, production quantity, and current inventory position. For an obsolete or legacy device, include the target assembly quantity and required delivery date in the request so procurement can identify stock, new manufacture, or an approved alternate without assuming that every CD4020B suffix is interchangeable.
Is CD4020BEX in stock?
Current stock for the exact CD4020BEX ordering code is not asserted on this page because inventory changes continuously. Use the Request a Quote form to request present availability and lead time. Include the package and quantity requirements in the inquiry. If the original producer cannot supply the part, ask for a specifically identified 16DIP alternative with a documented pin-compatible CD4020B function rather than accepting a generic counter based only on its divide ratio.
What are the key specifications of CD4020BEX that engineers should know?
The CD4020BEX is a CMOS 14-stage ripple-carry binary counter and divider in a 16-pin DIP package. According to the Texas Instruments family page and the Harris-related product listing, its defining characteristics are 14 counting stages, CMOS implementation, binary-counter operation, and a 16DIP footprint. Supply voltage, maximum operating frequency, output current, temperature range, and propagation delay must be taken from the exact manufacturer datasheet because they are not stated in the product summaries.
When should I choose CD4020BEX over a modern counter?
Choose CD4020BEX when an existing 16DIP board requires that counter architecture, the legacy CD4000 logic interface must be preserved, and redesigning the PCB is undesirable. A modern counter may be preferable for a new design when lower supply voltage, faster operation, smaller footprint, or programmable output selection is important. For repair and legacy-extension work, verify pin compatibility and timing margins before using the legacy device.
Is CD4020BEX suitable for industrial pulse counting?
CD4020BEX can be suitable for industrial pulse-counting and frequency-division circuits when the pulse rate, noise margin, supply range, and environmental limits remain within the device ratings. Its ripple-carry counter divides a clock into lower binary-rate outputs, while the reset function supports repeatable counting intervals. Add input conditioning for noisy industrial signals and confirm propagation-delay behavior if multiple output stages must switch coherently.
Does CD4020BEX need an external crystal?
An external crystal is not inherently required for the CD4020B counter architecture because the device includes an oscillator section and also accepts an external clock. The appropriate clock source depends on frequency accuracy, jitter, and stability requirements. Use a crystal or other precision source only when the application needs better timing accuracy than the on-chip oscillator can provide, and follow the manufacturer oscillator-component guidance.

工程参考数据: CD4020BEX ——对比、设计指导和合规信息。

选型指南

Choose CD4020BEX when maintaining or reproducing a legacy CD4020B design that specifically calls for a 14-stage CMOS ripple-carry counter in a 16DIP package. It is particularly appropriate for repair assemblies, industrial equipment, and timing circuits where redesigning the PCB would add unnecessary risk. Select the documented CD4020BE alternatives when the required pin functions, supply limits, operating temperature, and timing behavior match the installed circuit. For a completely new design, compare the legacy device with modern counters when lower voltage, smaller footprint, faster operation, or programmable output selection matters. A modern counter may provide broader supply and environmental options, but it is not automatically a drop-in replacement because package, pinout, logic levels, and reset timing can differ.

与替代料对比

参数 本产品 CD4020BE CD4020BE
Brand Harris Corporation Rochester Electronics Texas Instruments
Package 16DIP 16DIP 16DIP
Product Type CMOS binary counter/divider IC binary counter CMOS 14-stage ripple-carry binary counter/divider
Counting Stages 14 stages 14 stages 14 stages
Logic Technology CMOS CMOS CMOS
Counter Architecture Ripple-carry binary counter Binary counter Ripple-carry binary counter

关键差异点

  • Preserves the original 16DIP CD4020B board architecture (对比 CD4020BE)
  • Maintains the 14-stage binary-counter architecture (对比 CD4020BE)
  • Supports straightforward legacy repair and extension (对比 CD4020BE)

设计说明

Confirm every connection against the manufacturer pin-description table before laying out the 16DIP footprint. In particular, distinguish the clock, reset, oscillator, supply, ground, and divided-output pins rather than relying on a generic CD4000-series diagram. Preserve a continuous ground path, route the clock away from oscillator and switching nodes, and place optional oscillator components close to their associated pins.

Evaluate the clock edge at the actual supply voltage and temperature rather than relying only on the nominal maximum-frequency figure. Ripple-carry propagation accumulates from stage to stage, so choose an early counter output when downstream circuitry requires tightly aligned timing. For slow input signals, use a suitable Schmitt-trigger conditioning stage or another cleanup method before driving the clock input.

Do not approve an alternative from the CD4020 family name alone. Verify that the replacement has the same 16DIP pin functions, acceptable supply-voltage range, required logic levels, temperature grade, and propagation-delay behavior. Also verify reset polarity and oscillator configuration, because ordering suffixes can indicate package, temperature, or producer-specific qualification differences that materially affect a drop-in decision.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The legacy Harris/Intersil CD4020B product listing does not provide enough information to assign RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 qualification is not indicated for this general-purpose logic-counter device.

数据核验日期: 2026-11-15 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

cd4020be datasheet CD4020BEX datasheet CD4020BEX pinout CD4020BEX equivalent CD4020BEX replacement CD4020BEX drop-in replacement CD4020BEX price CD4020BEX stock CD4020BEX 16DIP footprint CD4020B 14-stage counter CD4020B frequency divider CD4020BEX vs CD4020BE

相关元器件 & 术语

Harris Corporation CD4020BEX CD4020B CD4020BE Rochester Electronics Texas Instruments CMOS logic binary counter ripple-carry counter frequency divider CD4000 series logic counter digital timing IC semiconductor 16DIP DIP package through-hole technology surface-mount technology clock input reset input oscillator section power management industrial control electronic timing
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情