CD4020BEX - 14-Stage CMOS Counter | Harris Corporation
MPN: CD4020BEX ✗ End of LifeCD4020BEX Overview
A CMOS binary counter is a digital logic device that increments an internal binary count when triggered by an active clock edge. The CD4000 series belongs to the CMOS logic hierarchy, combining low static power consumption with wide supply-voltage tolerance. Counters in this family are commonly used to divide one frequency into lower clock or timing signals without requiring a programmable microcontroller.
The CD4020BEX provides a 14-stage counting section rather than the 16-stage architecture associated with some other binary-counter families. Its useful output stages support divide-by-two and higher division ratios. Because the output behavior is determined by the binary counter and oscillator stages, the device is suitable for pulse counting, frequency division, timing generation, and low-frequency clock derivation.
The ripple-counter implementation allows each stage to propagate a clock transition to the following stage. This structure provides straightforward division from the external clock while remaining suitable for applications where propagation delay between stages is not the principal constraint. An internal oscillator section can also be used for frequency generation, subject to the operating conditions and component recommendations in the manufacturer datasheet.
Typical uses include digital timing systems, industrial control counters, pulse-rate measurement, clock division, and periodic-event generation. The CD4020BEX is particularly appropriate for legacy equipment, repair assemblies, and new designs that specifically require the CD4020B architecture and the 16-pin DIP footprint.
When laying out the circuit, keep clock and reset traces short, maintain a common ground reference, and place any required timing or bypass capacitors close to their associated pins. Confirm supply-voltage limits, output-drive requirements, and maximum operating frequency against the manufacturer datasheet before using the counter in high-speed or safety-related systems.
This product page combines the functional description, package details, sourcing options, comparison guidance, and application-oriented design considerations needed to evaluate the CD4020BEX for a new PCB or an existing DIP-16 assembly.
Drop-in alternatives for CD4020BEX — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with CD4020BEX (same form factor and footprint) — differing in Logic Family.
CD4020BE
✅ Drop-InContact for price
View Datasheet →CD4020BE
✅ Drop-InContact for price
View Datasheet →CD4020BEX Maximum Ratings & Electrical Characteristics
| Product Type | CMOS 14-stage ripple-carry binary counter/divider |
| Logic Family | CD4000 CMOS series |
| Counting Stages | 14 stages |
| Counter Architecture | Ripple-carry binary counter |
| Package | 16-pin dual in-line package (16DIP) |
| Pin Count | 16 pins |
| Mounting Type | Through-hole |
CD4020BEX 16-pin dual in-line package (16dip) Pin Configuration Guide
Pin configuration for CD4020BEX (16-pin dual in-line package (16dip) package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for CD4020BEX.
Refer to the datasheet for full pin configuration.
Typical Applications
CD4020BEX is suitable for 6 applications: Pulse and Event Counting, Frequency Divider and Clock Generation, Industrial Timer and Retriggerable Interval, Timing Signal Generation, Legacy Equipment Repair, Digital Divider Control.
Pulse and Event Counting
The CD4020BEX is suitable for counting periodic input pulses when the target output rate can be produced by one of its 14 binary stages. Its ripple-carry architecture provides direct division of the incoming clock, allowing a system to derive a lower-rate event signal without a programmable controller. Because ripple counters accumulate propagation delay across stages, use the most suitable early output for timing-critical work. Confirm the maximum clock frequency and propagation delay in the manufacturer datasheet, and add conditioning when the source is a noisy sensor or mechanical switch.
Recommended
Frequency Divider and Clock Generation
CD4020BEX can divide an input clock into lower binary frequencies, making it useful for timing blocks, sampling strobes, and periodic system-control signals. With 14 counter stages, the architecture offers multiple division points rather than a single fixed divide ratio. Select the output that meets the required frequency and timing relationship, and account for cumulative propagation delay when multiple stages are used in a cascade. The exact usable frequency range depends on supply voltage and package grade, so validate timing at the intended voltage and temperature.
Recommended
Industrial Timer and Retriggerable Interval
The counter can establish repeatable timing intervals for industrial controllers by combining an incoming process pulse with the reset function and a selected divided output. This arrangement supports retriggerable monostable behavior or periodic control tasks in legacy automation equipment. Because the reset function and selected output stage determine the interval, verify the active reset level and timing sequence in the manufacturer pin-description table. Keep the clock net away from switching-power nodes and use a ground reference that remains stable with the surrounding relay and actuator circuits.
Recommended
Timing Signal Generation
CD4020BEX can generate coarse timing signals from an oscillator or external clock, providing enable or strobe pulses for instrumentation and sequencing circuits. The on-chip oscillator section offers a simple way to establish a counting reference, while the external clock input permits a more controlled frequency source. Choose the counter output according to the required interval and ensure that propagation delay does not violate the system timing budget. For battery-powered equipment, confirm the quiescent current and oscillator start-up behavior from the exact device documentation before finalizing the power budget.
Recommended
Legacy Equipment Repair
The 16DIP CD4020BEX format makes the device especially relevant to repairing or extending equipment designed around the original CD4020B architecture. A qualified CD4020BE alternative can preserve the board outline and logic function when its pin functions and electrical ratings match. Before installation, compare the clock, reset, oscillator, supply, and counter-output assignments and confirm the replacement's temperature and qualification requirements. A shared family name alone is not sufficient for approval; the manufacturer datasheet must support the substitution.
Recommended
Digital Divider Control
A CD4020BEX can divide a system clock into enable windows for multiplexers, sampling systems, or sequential control logic. Dividing the clock rather than executing software is useful when predictable hardware timing is required and the board already contains compatible CMOS logic. Choose the output stage to produce the required update interval and check that the divided edge remains valid for downstream devices. If the divider drives long traces or slow CMOS inputs, account for rise time, noise coupling, and the receiving device's input thresholds rather than relying only on nominal frequency values.
Recommended
Recommended Products Summary
Engineering reference data for CD4020BEX — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | CD4020BE | CD4020BE |
|---|---|---|---|
| Brand | Harris Corporation | Rochester Electronics | Texas Instruments |
| Package | 16DIP | 16DIP | 16DIP |
| Product Type | CMOS binary counter/divider | IC binary counter | CMOS 14-stage ripple-carry binary counter/divider |
| Counting Stages | 14 stages | 14 stages | 14 stages |
| Logic Technology | CMOS | CMOS | CMOS |
| Counter Architecture | Ripple-carry binary counter | Binary counter | Ripple-carry binary counter |
Key Differentiators
- Preserves the original 16DIP CD4020B board architecture (vs CD4020BE)
- Maintains the 14-stage binary-counter architecture (vs CD4020BE)
- Supports straightforward legacy repair and extension (vs CD4020BE)
Design Notes
Confirm every connection against the manufacturer pin-description table before laying out the 16DIP footprint. In particular, distinguish the clock, reset, oscillator, supply, ground, and divided-output pins rather than relying on a generic CD4000-series diagram. Preserve a continuous ground path, route the clock away from oscillator and switching nodes, and place optional oscillator components close to their associated pins.
Evaluate the clock edge at the actual supply voltage and temperature rather than relying only on the nominal maximum-frequency figure. Ripple-carry propagation accumulates from stage to stage, so choose an early counter output when downstream circuitry requires tightly aligned timing. For slow input signals, use a suitable Schmitt-trigger conditioning stage or another cleanup method before driving the clock input.
Do not approve an alternative from the CD4020 family name alone. Verify that the replacement has the same 16DIP pin functions, acceptable supply-voltage range, required logic levels, temperature grade, and propagation-delay behavior. Also verify reset polarity and oscillator configuration, because ordering suffixes can indicate package, temperature, or producer-specific qualification differences that materially affect a drop-in decision.
Compliance Information
The legacy Harris/Intersil CD4020B product listing does not provide enough information to assign RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 qualification is not indicated for this general-purpose logic-counter device.