Texas Instruments

CD4060BMT - 14-Stage CMOS Counter | Texas Instruments

料号: CD4060BMT ✓ 量产中
16-lead SOIC Package
最小起订量: 1 |

CD4060BMT 概述

Texas Instruments CD4060BMT is a CMOS 14-stage ripple-carry binary counter/divider with an on-chip oscillator, housed in a 16-lead SOIC package. The device combines a 14-bit counter with oscillator, divider, and reset functions, providing 14 parallel binary outputs and one serial output. Its negative-edge counting behavior and positive RESET input make it suitable for timing, frequency division, and clock-generation circuits.

A binary counter is a sequential digital circuit that records a number of input clock transitions as binary states. A ripple-carry counter uses each flip-flop stage to clock the next stage, while a divider circuit derives lower-frequency outputs by observing selected counter stages. The CD4060B belongs to the CMOS logic hierarchy, integrating counter, divider, and oscillator functions into one package rather than requiring separate timing components.

The CD4060BMT provides a 14-stage counting architecture in a 16-lead SOIC package. Its oscillator section supports RC or crystal oscillator configurations, while the RESET input returns the counter outputs to the all-zero state and disables the oscillator. A high-level RESET signal initiates the reset function, allowing a system controller to establish a known timing state during startup or test.

Internally, the counter stages are master-slave flip-flops, supporting stable state transitions as the ripple signal advances through the chain. The available outputs permit division by powers of two when the circuit is used as a frequency divider. This architecture is useful when a system needs multiple related timing divisions without requiring a programmable clock controller.

Typical uses include digital timers, pulse-generation circuits, clock dividers, delay generation, frequency division, and general-purpose sequential control. The on-chip oscillator is particularly useful in autonomous timers where an external reference clock would add unnecessary components. For designs requiring deterministic frequency accuracy, the oscillator configuration and component tolerances must be evaluated against the required timing tolerance.

When laying out a CD4060BMT circuit, keep oscillator components and the RESET trace away from sensitive high-speed nodes, and route each counter output according to its destination fanout. Long interconnects can increase susceptibility to capacitive coupling, particularly when several ripple stages operate simultaneously. The SOIC package supports conventional surface-mount assembly, but pin-1 orientation and output-state definitions should be checked against the manufacturer datasheet before PCB release.

This product page combines the CD4060BMT device description, manufacturer documentation, procurement guidance, verified drop-in alternatives, comparison parameters, and practical implementation guidance. It is intended to help engineers identify the correct counter/divider, plan its oscillator and reset behavior, and evaluate replacement options without confusing terminal-function differences or package order codes.

直接替换替代料: CD4060BMT ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: CD4060BMT (相同外形与封装尺寸) ——差异在于 Counter Resolution, Logic Family, Package, Product Type.

onsemi
Counter Resolution: 14 bits
Logic Family: 4000-series CMOS
Package: 16-pin SOIC
对比 CD4060BMT →
Texas Instruments
Logic Family: CMOS
对比 CD4060BMT →

CD4060BM

✅ 直接替换
Texas Instruments
📦 16-lead SOIC
14-stage ripple-carry binary counter/divider · CMOS · 1 element · 14 bit · Negative edge · 3 V to 18 V · 24 MHz · RC or crystal oscillator circuit support

联系询价

查看数据手册 →

CD4060BM96

✅ 直接替换
📦 16-lead SOIC
Same 14-stage counter/divider and 16-lead SOIC outline; 0 stage-count difference, with exact ordering-specific electrical deltas .

📋 参考替代料(不在目录中)

CD4060BMG4

✅ 直接替换
📦 16-lead SOIC
Same 14-stage counter/divider and 16-lead SOIC outline; 0 functional-resolution difference, with exact ordering-specific temperature and processing deltas .

📋 参考替代料(不在目录中)

MC14060BDR2G

✅ 直接替换
📦 16-lead SOIC
Same 14-stage ripple-counter architecture and 16-lead SOIC footprint; 0 stage-count difference, while voltage, timing, and exact pin-level differences are .

📋 参考替代料(不在目录中)

CD4060BCMX

✅ 直接替换
📦 16-lead SOIC
Same 14-stage counter/divider function in a 16-lead SOIC package; 0 stage-count difference, while exact electrical limits and ordering details are .

📋 参考替代料(不在目录中)

CD4060BMT 最大额定值与电气特性

Product Type CMOS 14-stage ripple-carry binary counter/divider and oscillator
Counter Element Count 1 element
Counter Stages 14 stages
Counter Resolution 14 bit
Counting Edge Negative edge
Oscillator Configuration RC or crystal oscillator
Reset Function Resets counter outputs to the all-zero state and disables the oscillator
Reset Input Level High level
Counter Stage Architecture Master-slave flip-flops
输出类型 Binary
Parallel Outputs 14 outputs
Serial Output 1 output
封装 16-lead SOIC
Package Family SOIC-16 surface-mount package
Technology CMOS
安装类型 Surface mount

CD4060BMT 引脚配置

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
引脚 1 OSC1 — Oscillator input or RC oscillator terminal
引脚 2 OSC2 — Oscillator output or RC oscillator terminal
引脚 3 RESET — High-level reset input; resets the counter and disables the oscillator
引脚 4 Q0 — Binary counter output Q0
引脚 5 Q1 — Binary counter output Q1
引脚 6 Q2 — Binary counter output Q2
引脚 7 Q3 — Binary counter output Q3
引脚 8 Q4 — Binary counter output Q4
引脚 9 Q5 — Binary counter output Q5
引脚 10 Q6 — Binary counter output Q6
引脚 11 Q7 — Binary counter output Q7
引脚 12 Q8 — Binary counter output Q8
引脚 13 Q9 — Binary counter output Q9
引脚 14 Q10 — Binary counter output Q10
引脚 15 Q11 — Binary counter output Q11
引脚 16 VDD — Positive supply terminal
引脚 17 Q12 — Binary counter output Q12
引脚 18 Q13 — Binary counter output Q13
引脚 19 Q14 — Serial binary counter output Q14
引脚 20 VSS — Ground or negative supply terminal

典型应用

CD4060BMT 适用于 6 应用s: Digital Timer, Pulse and Tone Generation, Clock Divider, Delay Generation, Frequency Division, Sequential Control.

⏱️

Digital Timer

The CD4060BMT fits a digital timer because its on-chip oscillator and 14 ripple-counter stages provide a compact timing chain without a separate binary counter. The oscillator can use an RC network for a cost-sensitive interval timer or a crystal arrangement when frequency stability is more important than component count. Selecting one of the binary outputs creates a divided timing signal, while the high-level RESET input clears the count and disables oscillation during initialization. Because ripple stages can briefly transition when the count advances, software-visible outputs in a synchronous system should be sampled after settling. Verify oscillator tolerance, reset removal timing, and the selected division ratio before defining the timer’s guaranteed interval.

📡

Pulse and Tone Generation

The CD4060BMT can generate periodic pulses or coarse-frequency timing signals by feeding its oscillator into the 14-stage counter and selecting a divided output. Multiple binary outputs allow several related pulse rates to coexist, which is useful in alarms, indicators, and simple sequencing circuits. The reset function provides a deterministic starting point, although the oscillator is disabled while reset is asserted. For drive-sensitive loads, buffer counter outputs because each stage adds propagation delay and presents a finite load. Designers should also account for the narrow transition intervals inherent in ripple counters, particularly if an output is sampled by a high-speed edge-sensitive circuit.

🕰️

Clock Divider

The CD4060BMT is appropriate for clock division because each ripple-counter stage represents a power-of-two division of the oscillator frequency. With 14 stages, the device can expose multiple binary-derived rates for sequencing, sampling, and housekeeping functions. A crystal oscillator configuration is preferable when the divided clock must retain tight accuracy over temperature and supply changes, while an RC oscillator may be sufficient for general-purpose timing. Confirm maximum operating frequency, propagation delay, output drive, and supply-voltage limits against the manufacturer data before cascading its outputs into another synchronous circuit.

⏳

Delay Generation

The CD4060BMT can implement a digital delay by counting oscillator cycles until a selected binary output changes state. This approach avoids a large chain of discrete delay gates and provides a clear relationship between oscillation frequency and delay duration. RC oscillator accuracy directly affects the resulting delay, so component tolerance and temperature drift should be included in worst-case timing analysis. Reset can establish a repeatable starting condition at power-up or between measurements. If the delay must meet a guaranteed maximum and minimum interval, validate both oscillator-frequency limits and the counter’s propagation characteristics rather than relying only on the nominal component values.

🌐

Frequency Division

The CD4060BMT provides a practical frequency divider by feeding a reference oscillation into the ripple-carry stages and taking a divided signal from a binary output. The 14-stage architecture supports a broad range of division ratios while keeping the external component count low. For instrumentation, test equipment, or communication timing, a crystal oscillator can improve frequency stability compared with an RC network. Confirm the oscillator’s permitted frequency range and ensure that downstream logic can tolerate the ripple transition at the selected counter output. The reset input should remain inactive during normal divided-clock operation to avoid interrupting the oscillator and restarting the count sequence.

🏭

Sequential Control

The CD4060BMT can serve as a simple sequential-control element in appliances, test fixtures, and low-speed automation where a recurring counter state must trigger another circuit. Different counter outputs can represent successive time intervals, allowing one oscillator to coordinate multiple events. The master-slave stage arrangement supports defined state transitions, but ripple propagation means several outputs may not change simultaneously. Choose reset polarity and timing carefully so downstream devices ignore transient states during initialization. Also maintain adequate supply decoupling near VDD and route counter outputs away from the oscillator network to reduce coupling into the timing reference.

推荐产品汇总

CD4060BM Texas Instruments 用于: Digital Timer, Delay Generation, Sequential Control MC14060BDR2G 14-stage CMOS counter/divider with oscillator for cross-brand design review 用于: Digital Timer, Clock Divider, Frequency Division CD4060BM96 Alternative 14-stage counter/divider ordering option 用于: Pulse and Tone Generation, Frequency Division CD4060BCMX Cross-brand 14-stage counter/divider option 用于: Pulse and Tone Generation, Delay Generation CD4060BMG4 Same-family counter/divider for assembly-method comparison 用于: Clock Divider, Sequential Control
What is the CD4060BMT?
The CD4060BMT is a Texas Instruments CMOS 14-stage ripple-carry binary counter/divider with an on-chip oscillator and reset function. According to the Texas Instruments CD4060B product page, it provides a 14-bit counting section in a 16-lead SOIC package, allowing it to divide an oscillator frequency and generate multiple binary timing outputs.
What is the CD4060BMT counter resolution?
The CD4060BMT has a 14-stage, 14-bit ripple-carry counter architecture. The Texas Instruments CD4060B documentation identifies 14 counter stages built from master-slave flip-flops. This resolution allows binary division by powers of two when a suitable counter output is selected for the required clock or timing rate.
How do I use the CD4060BMT oscillator?
The CD4060BMT oscillator can be configured for either an RC oscillator or a crystal oscillator, as described in the Texas Instruments CD4060B documentation. Connect the oscillator components to OSC1 and OSC2, keep the feedback path short, and validate frequency accuracy across temperature and supply-voltage tolerances before fixing the timing components.
Where can I download the CD4060BMT datasheet PDF?
The official CD4060BMT datasheet is available from Texas Instruments through the CD4060B technical-document link at https://www.ti.com/lit/gpn/CD4060B. The document provides the authoritative pin descriptions, electrical characteristics, timing information, oscillator configurations, and ordering information needed for schematic capture and PCB design.
Where can I find the CD4060BMT pinout?
The CD4060BMT uses a 16-lead SOIC pinout with OSC1, OSC2, RESET, 14 binary outputs, VDD, and VSS. Use the manufacturer pin-description table in the CD4060B datasheet when assigning tracks and confirming whether pin 1 is located at the top-left of the package as viewed from the component side.
What does the RESET input do on the CD4060BMT?
A high level on the CD4060BMT RESET input resets the counter outputs to the all-zero state and disables the oscillator. The Texas Instruments CD4060B product documentation identifies RESET as a positive-level control, so the reset source must remain inactive during normal counting.
Can the CD4060BMT operate as a frequency divider?
Yes, the CD4060BMT can operate as a frequency divider by feeding its oscillator into the 14 ripple-carry stages and selecting an appropriate binary output. The Texas Instruments CD4060B description identifies the device as both a binary counter and divider, making divided clock outputs available for timers and sequential-control circuits.
Is CD4060BMT suitable for a digital timer?
The CD4060BMT is suitable for a digital timer because it combines an oscillator, 14 counting stages, binary outputs, and a reset input in one device. Its main design trade-off is oscillator accuracy: an RC configuration is economical but component-dependent, while a crystal configuration generally offers better frequency stability but requires additional design effort.
What can replace the CD4060BMT?
The CD4060BMT can be replaced by a pin-compatible 14-stage CMOS counter/divider in the same 16-lead SOIC footprint, subject to voltage, timing, and output-function checks. Candidates include CD4060BM, CD4060BM96, CD4060BMG4, and the cross-brand MC14060BDR2G, but each ordering code must be checked against the manufacturer data before release.
Is the MC14060BDR2G the same as the CD4060BMT?
The MC14060BDR2G is functionally similar to the CD4060BMT because it is described as a 14-stage binary ripple counter with an on-chip oscillator and reset, but it is not automatically an approved substitute. Engineers should compare supply voltage, oscillator limits, timing, output levels, and exact SOIC pin assignments before using it as a drop-in replacement.
CD4060BMT vs MC14060BDR2G: which is better for a timer?
Choose the MC14060BDR2G only after confirming that its electrical limits and pin functions match the timer design; both parts provide a 14-stage binary ripple counter with an oscillator. For a new design, the Texas Instruments CD4060BMT is preferable when its documented operating conditions and supply range align directly with the existing circuit.
When should I choose CD4060BMT over CD4060BM?
Choose CD4060BMT when the production assembly process requires the MT tape-and-reel ordering form, and choose CD4060BM when that ordering option is suitable for the assembly method. Their shared 16-lead SOIC footprint simplifies hardware reuse, but package orientation, moisture handling, and ordering details should still be confirmed against the manufacturer documentation.
What are the key specifications of CD4060BMT that engineers should know?
The key CD4060BMT specifications are a 14-stage, 14-bit ripple-carry counter, negative-edge counting, 14 parallel binary outputs, one serial output, an RC-or-crystal-capable oscillator, and a high-level reset that clears the outputs and disables oscillation. The device is packaged in a 16-lead SOIC and belongs to the CMOS logic family.
Where to buy CD4060BMT online?
Use the Request a Quote form on this page to request CD4060BMT availability, lead time, and ordering support. Quote requests are preferable to static listing data because component availability and commercial terms can change without notice. For production planning, include the required quantity, package form, and target assembly method in the request.
What is the lead time for CD4060BMT?
The current CD4060BMT lead time depends on inventory, order quantity, package form, and manufacturing conditions. Use the Request a Quote form on this page to state the required quantity and target delivery date so procurement can confirm the latest scheduling information for the exact MPN.
Is CD4060BMT RoHS compliant?
The RoHS status for CD4060BMT should be confirmed from the current Texas Instruments product documentation or declaration associated with the ordered package. This page does not infer regulatory status from the CMOS technology or package type. Request the applicable material-compliance documentation before using the device in a restricted supply-chain program.

工程参考数据: CD4060BMT ——对比、设计指导和合规信息。

选型指南

Choose the CD4060BMT for a 16-lead SOIC timer, divider, pulse generator, or sequencing circuit that needs a 14-stage CMOS counter and on-chip oscillator. It is especially suitable when the design must support either RC or crystal timing and when the PCB already uses the CD4060B pin arrangement. CD4060BM, CD4060BM96, and CD4060BMG4 are useful same-manufacturer options when their ordering form, temperature grade, or assembly method better matches production needs, but each should be checked against the exact electrical limits. MC14060BDR2G and CD4060BCMX are cross-brand candidates for supply-risk review; their shared 14-stage function and SOIC footprint make them candidates for evaluation, not automatic substitutions. Before selecting any alternative, compare supply voltage, oscillator frequency limits, propagation delay, output levels, reset timing, and pin descriptions. For new designs, favor the CD4060BMT when its manufacturer specifications align directly with the application and the assembly method uses the MT ordering form.

与替代料对比

参数 本产品 CD4060BM CD4060BM96 CD4060BMG4 MC14060BDR2G CD4060BCMX
Package 16-lead SOIC 16-lead SOIC 16-lead SOIC 16-lead SOIC 16-lead SOIC 16-lead SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments onsemi onsemi
Function 14-stage ripple-carry binary counter/divider and oscillator 14-stage ripple-carry binary counter/divider and oscillator 14-stage ripple-carry binary counter/divider and oscillator 14-stage ripple-carry binary counter/divider and oscillator 14-stage binary ripple counter with oscillator 14-stage counter/divider
Counter Stages 14 stages 14 stages 14 stages 14 stages 14 stages 14 stages
Counter Resolution 14 bit 14 bit 14 bit 14 bit 14 bit 14 bit

关键差异点

  • Combines oscillator, counter, divider, and reset in one CMOS package (对比 MC14060BDR2G)
  • Provides 14-bit resolution in a standard 16-lead SOIC (对比 CD4060BM)
  • Supports selectable power-of-two frequency division (对比 CD4060BCMX)
  • High-level reset clears the count and disables oscillation (对比 MC14060BDR2G)

设计说明

Place oscillator resistors and capacitors directly between OSC1 and OSC2, and keep this high-impedance timing loop compact. Route RESET and binary outputs away from the oscillator nodes to reduce capacitive coupling that can shift frequency. For crystal operation, follow the manufacturer’s component and grounding recommendations and avoid long parallel copper runs around the oscillator pins.

Treat the CD4060BMT as a ripple counter rather than a synchronous counter. Outputs change at different instants as the count propagates, so a downstream latch or microcontroller should sample a selected output only after the expected transition has settled. Avoid using several adjacent counter outputs as an atomic multi-bit bus unless the receiving circuit tolerates intermediate states.

Place a local supply-decoupling capacitor close to VDD and a ground-return path close to VSS. Validate the capacitor type, voltage rating, and ESR requirement against the manufacturer’s recommended circuit because the oscillator’s behavior can depend on supply and bypass-network details. Check the allowed supply range for every ordering option before designing the power rail.

Do not interpret a binary output as changing instantaneously when the oscillator crosses a new count. The ripple delay accumulates across multiple stages, and oscillator component tolerances directly affect the final timing interval. Build worst-case frequency and propagation-delay budgets into timer and frequency-divider designs, and use a crystal oscillator when timing accuracy cannot tolerate RC drift.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The manufacturer and distributor pages used for this product did not provide explicit compliance declarations in their visible descriptions. Obtain the current material-compliance documents for the exact orderable part before releasing a regulated design.

相关搜索

cd4060bm timer cd4060bm pdf cd4060bm pinout cd4060bm circuit cd4060bm counter cd4060bm equivalent cd4060bm oscillator CD4060BMT datasheet CD4060BMT datasheet pdf CD4060BMT pinout CD4060BMT replacement CD4060BMT vs MC14060BDR2G CD4060BMT application circuit Texas Instruments CD4060BMT

相关元器件 & 术语

Texas Instruments CD4060BMT CD4060B CD4060BM CD4060BM96 CD4060BMG4 onsemi MC14060BDR2G CD4060BCMX CMOS binary counter ripple-carry counter frequency divider oscillator master-slave flip-flop RESET input negative-edge counting RC oscillator crystal oscillator SOIC-16 QFN family surface mount SMD timer clock divider digital sequencing frequency division RoHS REACH AEC-Q100
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情