CD4060BMT - 14-Stage CMOS Counter | Texas Instruments
MPN: CD4060BMT ✓ פעילCD4060BMT סקירה
A binary counter is a sequential digital circuit that records a number of input clock transitions as binary states. A ripple-carry counter uses each flip-flop stage to clock the next stage, while a divider circuit derives lower-frequency outputs by observing selected counter stages. The CD4060B belongs to the CMOS logic hierarchy, integrating counter, divider, and oscillator functions into one package rather than requiring separate timing components.
The CD4060BMT provides a 14-stage counting architecture in a 16-lead SOIC package. Its oscillator section supports RC or crystal oscillator configurations, while the RESET input returns the counter outputs to the all-zero state and disables the oscillator. A high-level RESET signal initiates the reset function, allowing a system controller to establish a known timing state during startup or test.
Internally, the counter stages are master-slave flip-flops, supporting stable state transitions as the ripple signal advances through the chain. The available outputs permit division by powers of two when the circuit is used as a frequency divider. This architecture is useful when a system needs multiple related timing divisions without requiring a programmable clock controller.
Typical uses include digital timers, pulse-generation circuits, clock dividers, delay generation, frequency division, and general-purpose sequential control. The on-chip oscillator is particularly useful in autonomous timers where an external reference clock would add unnecessary components. For designs requiring deterministic frequency accuracy, the oscillator configuration and component tolerances must be evaluated against the required timing tolerance.
When laying out a CD4060BMT circuit, keep oscillator components and the RESET trace away from sensitive high-speed nodes, and route each counter output according to its destination fanout. Long interconnects can increase susceptibility to capacitive coupling, particularly when several ripple stages operate simultaneously. The SOIC package supports conventional surface-mount assembly, but pin-1 orientation and output-state definitions should be checked against the manufacturer datasheet before PCB release.
This product page combines the CD4060BMT device description, manufacturer documentation, procurement guidance, verified drop-in alternatives, comparison parameters, and practical implementation guidance. It is intended to help engineers identify the correct counter/divider, plan its oscillator and reset behavior, and evaluate replacement options without confusing terminal-function differences or package order codes.
חלופות תחליף ישיר עבור CD4060BMT — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם CD4060BMT (אותו גורם צורה וטביעת רגל) — שונים ב Counter Resolution, Logic Family, Package, Product Type.
CD4060BM
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←CD4060BM96
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
CD4060BMG4
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MC14060BDR2G
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
CD4060BCMX
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
CD4060BMT דירוגים מרביים ומאפיינים חשמליים
| Product Type | CMOS 14-stage ripple-carry binary counter/divider and oscillator |
| Counter Element Count | 1 element |
| Counter Stages | 14 stages |
| Counter Resolution | 14 bit |
| Counting Edge | Negative edge |
| Oscillator Configuration | RC or crystal oscillator |
| Reset Function | Resets counter outputs to the all-zero state and disables the oscillator |
| Reset Input Level | High level |
| Counter Stage Architecture | Master-slave flip-flops |
| סוג פלט | Binary |
| Parallel Outputs | 14 outputs |
| Serial Output | 1 output |
| מארז | 16-lead SOIC |
| Package Family | SOIC-16 surface-mount package |
| Technology | CMOS |
| סוג הרכבה | Surface mount |
תצורת פינים של CD4060BMT
| פין 1 | OSC1 — Oscillator input or RC oscillator terminal |
| פין 2 | OSC2 — Oscillator output or RC oscillator terminal |
| פין 3 | RESET — High-level reset input; resets the counter and disables the oscillator |
| פין 4 | Q0 — Binary counter output Q0 |
| פין 5 | Q1 — Binary counter output Q1 |
| פין 6 | Q2 — Binary counter output Q2 |
| פין 7 | Q3 — Binary counter output Q3 |
| פין 8 | Q4 — Binary counter output Q4 |
| פין 9 | Q5 — Binary counter output Q5 |
| פין 10 | Q6 — Binary counter output Q6 |
| פין 11 | Q7 — Binary counter output Q7 |
| פין 12 | Q8 — Binary counter output Q8 |
| פין 13 | Q9 — Binary counter output Q9 |
| פין 14 | Q10 — Binary counter output Q10 |
| פין 15 | Q11 — Binary counter output Q11 |
| פין 16 | VDD — Positive supply terminal |
| פין 17 | Q12 — Binary counter output Q12 |
| פין 18 | Q13 — Binary counter output Q13 |
| פין 19 | Q14 — Serial binary counter output Q14 |
| פין 20 | VSS — Ground or negative supply terminal |
יישומים טיפוסיים
CD4060BMT מתאים עבור 6 יישוםs: Digital Timer, Pulse and Tone Generation, Clock Divider, Delay Generation, Frequency Division, Sequential Control.
Digital Timer
The CD4060BMT fits a digital timer because its on-chip oscillator and 14 ripple-counter stages provide a compact timing chain without a separate binary counter. The oscillator can use an RC network for a cost-sensitive interval timer or a crystal arrangement when frequency stability is more important than component count. Selecting one of the binary outputs creates a divided timing signal, while the high-level RESET input clears the count and disables oscillation during initialization. Because ripple stages can briefly transition when the count advances, software-visible outputs in a synchronous system should be sampled after settling. Verify oscillator tolerance, reset removal timing, and the selected division ratio before defining the timer’s guaranteed interval.
מומלץ
Pulse and Tone Generation
The CD4060BMT can generate periodic pulses or coarse-frequency timing signals by feeding its oscillator into the 14-stage counter and selecting a divided output. Multiple binary outputs allow several related pulse rates to coexist, which is useful in alarms, indicators, and simple sequencing circuits. The reset function provides a deterministic starting point, although the oscillator is disabled while reset is asserted. For drive-sensitive loads, buffer counter outputs because each stage adds propagation delay and presents a finite load. Designers should also account for the narrow transition intervals inherent in ripple counters, particularly if an output is sampled by a high-speed edge-sensitive circuit.
מומלץ
Clock Divider
The CD4060BMT is appropriate for clock division because each ripple-counter stage represents a power-of-two division of the oscillator frequency. With 14 stages, the device can expose multiple binary-derived rates for sequencing, sampling, and housekeeping functions. A crystal oscillator configuration is preferable when the divided clock must retain tight accuracy over temperature and supply changes, while an RC oscillator may be sufficient for general-purpose timing. Confirm maximum operating frequency, propagation delay, output drive, and supply-voltage limits against the manufacturer data before cascading its outputs into another synchronous circuit.
מומלץ
Delay Generation
The CD4060BMT can implement a digital delay by counting oscillator cycles until a selected binary output changes state. This approach avoids a large chain of discrete delay gates and provides a clear relationship between oscillation frequency and delay duration. RC oscillator accuracy directly affects the resulting delay, so component tolerance and temperature drift should be included in worst-case timing analysis. Reset can establish a repeatable starting condition at power-up or between measurements. If the delay must meet a guaranteed maximum and minimum interval, validate both oscillator-frequency limits and the counter’s propagation characteristics rather than relying only on the nominal component values.
מומלץ
Frequency Division
The CD4060BMT provides a practical frequency divider by feeding a reference oscillation into the ripple-carry stages and taking a divided signal from a binary output. The 14-stage architecture supports a broad range of division ratios while keeping the external component count low. For instrumentation, test equipment, or communication timing, a crystal oscillator can improve frequency stability compared with an RC network. Confirm the oscillator’s permitted frequency range and ensure that downstream logic can tolerate the ripple transition at the selected counter output. The reset input should remain inactive during normal divided-clock operation to avoid interrupting the oscillator and restarting the count sequence.
מומלץ
Sequential Control
The CD4060BMT can serve as a simple sequential-control element in appliances, test fixtures, and low-speed automation where a recurring counter state must trigger another circuit. Different counter outputs can represent successive time intervals, allowing one oscillator to coordinate multiple events. The master-slave stage arrangement supports defined state transitions, but ripple propagation means several outputs may not change simultaneously. Choose reset polarity and timing carefully so downstream devices ignore transient states during initialization. Also maintain adequate supply decoupling near VDD and route counter outputs away from the oscillator network to reduce coupling into the timing reference.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור CD4060BMT — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | CD4060BM | CD4060BM96 | CD4060BMG4 | MC14060BDR2G | CD4060BCMX |
|---|---|---|---|---|---|---|
| Package | 16-lead SOIC | 16-lead SOIC | 16-lead SOIC | 16-lead SOIC | 16-lead SOIC | 16-lead SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | onsemi | onsemi |
| Function | 14-stage ripple-carry binary counter/divider and oscillator | 14-stage ripple-carry binary counter/divider and oscillator | 14-stage ripple-carry binary counter/divider and oscillator | 14-stage ripple-carry binary counter/divider and oscillator | 14-stage binary ripple counter with oscillator | 14-stage counter/divider |
| Counter Stages | 14 stages | 14 stages | 14 stages | 14 stages | 14 stages | 14 stages |
| Counter Resolution | 14 bit | 14 bit | 14 bit | 14 bit | 14 bit | 14 bit |
מבדילים עיקריים
- Combines oscillator, counter, divider, and reset in one CMOS package (לעומתMC14060BDR2G)
- Provides 14-bit resolution in a standard 16-lead SOIC (לעומתCD4060BM)
- Supports selectable power-of-two frequency division (לעומתCD4060BCMX)
- High-level reset clears the count and disables oscillation (לעומתMC14060BDR2G)
הערות תכנון
Place oscillator resistors and capacitors directly between OSC1 and OSC2, and keep this high-impedance timing loop compact. Route RESET and binary outputs away from the oscillator nodes to reduce capacitive coupling that can shift frequency. For crystal operation, follow the manufacturer’s component and grounding recommendations and avoid long parallel copper runs around the oscillator pins.
Treat the CD4060BMT as a ripple counter rather than a synchronous counter. Outputs change at different instants as the count propagates, so a downstream latch or microcontroller should sample a selected output only after the expected transition has settled. Avoid using several adjacent counter outputs as an atomic multi-bit bus unless the receiving circuit tolerates intermediate states.
Place a local supply-decoupling capacitor close to VDD and a ground-return path close to VSS. Validate the capacitor type, voltage rating, and ESR requirement against the manufacturer’s recommended circuit because the oscillator’s behavior can depend on supply and bypass-network details. Check the allowed supply range for every ordering option before designing the power rail.
Do not interpret a binary output as changing instantaneously when the oscillator crosses a new count. The ripple delay accumulates across multiple stages, and oscillator component tolerances directly affect the final timing interval. Build worst-case frequency and propagation-delay budgets into timer and frequency-divider designs, and use a crystal oscillator when timing accuracy cannot tolerate RC drift.
מידע על תאימות
The manufacturer and distributor pages used for this product did not provide explicit compliance declarations in their visible descriptions. Obtain the current material-compliance documents for the exact orderable part before releasing a regulated design.