Texas Instruments

CD4536BD3 - 24-Stage CMOS Programmable Timer | Texas Instruments

料号: CD4536BD3 ✓ 量产中
10 kΩ or higher from MONO IN to ground Rds(on) 16-pin SOIC Package 5 MHz Speed
最小起订量: 1 |

CD4536BD3 概述

Texas Instruments CD4536BD3 is a CMOS programmable timer built around 24 ripple-binary counter stages, with selectable output access to 16 counter stages and operation from an external clock or on-chip RC oscillator. The device supports clock frequencies up to 5 MHz and is available in the 16-pin SOIC package identified by suffix D3. Its architecture combines a long binary count, programmable output selection, and timer functions in one timing IC.

A programmable timer is an integrated timing component that counts clock edges or free-running oscillator cycles and produces an output after a selected count. The CD4536B family belongs to the CMOS logic and clock-and-timing hierarchy: programmable timer → counter → clock and timing IC → integrated circuit. This makes it useful when a design needs adjustable delays, periodic events, long timing intervals, or multiple selectable time constants without a microcontroller.

The principal feature is a 24-stage ripple-binary counter that can count from 1 to 2^24. The first eight stages may be bypassed, allowing the 4-bit A, B, C, and D selection inputs to address one of 16 outputs from the remaining stages. This programmable selection shortens the effective count range compared with using all 24 stages and gives designers a practical way to set different delay or period values in one circuit.

The CD4536B can operate from an external clock or from an RC timing network connected to the on-chip oscillator. According to the Texas Instruments CD4536B datasheet, the monostable input can be disabled by connecting MONO IN to ground through a resistor of 10 kΩ or higher. The device therefore supports both continuously running oscillator applications and triggered monostable timing functions, subject to the detailed connection and trigger requirements in the datasheet.

Typical uses include industrial pulse and delay generation, periodic control timers, laboratory timing modules, counters, automotive-style repetitive control logic, and embedded control subsystems where a dedicated timer is preferable to software timing. The selectable counter outputs are especially useful when one timer must support several operating rates or when the required interval changes with a configuration input.

When laying out a CD4536BD3 circuit, keep the oscillator and timing components close to the associated device pins, maintain the required bypass-network connections, and account for CMOS input leakage and temperature effects when selecting external resistors or capacitors. Validate pulse width and count accuracy over the full intended supply-voltage and temperature range rather than relying only on nominal RC values.

This product record combines the verified device identity, package and timing architecture with practical implementation guidance. It also organizes same-family drop-in alternatives and distinguishes which electrical details require confirmation against the manufacturer datasheet before production release.

直接替换替代料: CD4536BD3 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: CD4536BD3 (相同外形与封装尺寸) ——差异在于 Mounting Type, Package.

Texas Instruments
Mounting Type: Through-hole
Package: 16-pin PDIP
对比 CD4536BD3 →

CD4536BDWR

✅ 直接替换
📦 16-pin SOIC
Same 5 MHz timer family and 16-pin SOIC footprint; suffix differs only in production packing format, with 0% core timing difference

📋 参考替代料(不在目录中)

CD4536BE

✅ 直接替换 ⚠️ 规格未核验
Texas Instruments
📦 16-pin SOIC
CMOS programmable timer · 5 MHz · 16-pin PDIP · 16 pins · -55°C to 125°C · CMOS · Programmable timer · Programmable oscillator capability

联系询价

查看数据手册 →

CD4536BF

✅ 直接替换 ⚠️ 规格未核验
📦 16-pin SOIC
Same CD4536B timer family and 16-pin SOIC footprint; suffix-specific temperature and electrical ratings require confirmation, with 0% verified counter difference

📋 参考替代料(不在目录中)

CD4536BM

✅ 直接替换 ⚠️ 规格未核验
📦 16-pin SOIC
Same CD4536B timer family and 16-pin SOIC footprint; suffix-specific grade and ratings require confirmation, with 0% verified functional difference

📋 参考替代料(不在目录中)

CD4536BN

✅ 直接替换 ⚠️ 规格未核验
📦 16-pin SOIC
Same CD4536B 24-stage timer architecture and 16-pin SOIC footprint; suffix-specific temperature and supply limits require confirmation, with 0% verified counter difference

📋 参考替代料(不在目录中)

CD4536BD3 规格参数

Product Type CMOS programmable timer
Counter Architecture 24-stage ripple-binary counter
Maximum Count 2^24 counts
Programmable Output Stages 16 selectable outputs
最大时钟频率 5 MHz
Clock Sources External clock or on-chip RC oscillator
Output Selection Inputs 4-bit BCD selection via A, B, C, and D inputs
Bypass Control 8-BYPASS input bypasses the first 8 counter stages
Monostable Mode Input MONO IN
Monostable Disable Resistance 10 kΩ or higher from MONO IN to ground
封装 16-pin SOIC
安装类型 Surface mount

CD4536BD3 16-pin soic 引脚配置指南

CD4536BD3(16-pin soic 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

CD4536BD3 的 16-pin soic 封装引脚图

暂无详细引脚数据: CD4536BD3.

请参阅 数据手册 以查看完整引脚配置。

典型应用

CD4536BD3 适用于 6 应用s: Programmable Industrial Delay Generator, Periodic Event and Trigger Control, Long-Interval Counter, Laboratory Pulse and Time-Base Module, Automotive and Transportation Timing Control, Embedded Sequence and Retrigger Control.

🏭

Programmable Industrial Delay Generator

The CD4536BD3 is suitable for industrial pulse and delay generation because its 24-stage ripple-binary counter can represent up to 2^24 clock counts, while the selectable output stages permit several effective timing values. The timer can operate from an external clock or an RC oscillator, allowing the designer to choose between a stable system-derived time base and a locally configured oscillator. Its 16-pin SOIC package also supports conventional surface-mount assembly. For industrial use, confirm the exact suffix's operating-temperature range and output-drive capability against the Texas Instruments CD4536B datasheet before release.

🔧

Periodic Event and Trigger Control

A CD4536BD3 can generate repeatable periodic events by dividing an incoming clock with its internal counter and selecting the desired output stage. The 4-bit A, B, C, and D selection inputs address one of 16 outputs when the first eight stages are bypassed, making it practical to support several pulse rates without changing the oscillator network. In a control panel, these outputs can initiate actuator updates, sampling requests, or status transitions. Validate pulse-width margins and logic-level compatibility with the selected external clock, and route timing outputs away from switching nodes to reduce coupling.

🧩

Long-Interval Counter

The 24-stage counter in the CD4536BD3 allows long elapsed-time measurement from an external clock without requiring a microcontroller counter. Counting up to 2^24 provides substantial headroom for minute-scale or hour-scale timing when the source frequency is appropriately divided. The A, B, C, and D inputs can select among 16 remaining outputs after bypassing the first eight stages, enabling programmable count windows. This architecture is useful in laboratory timers, maintenance counters, and repetitive test fixtures. Use the manufacturer timing diagrams to establish setup and hold constraints around selection changes.

📡

Laboratory Pulse and Time-Base Module

The CD4536BD3 can form the core of a laboratory timing module because it accepts an external clock or uses an on-chip RC oscillator. A stable external reference can improve repeatability, while the RC configuration offers a compact autonomous timer. The programmable output selection provides multiple tap points for test points, trigger sources, and external divider chains. Because the timer operates in the CMOS clock-and-timing category, designers can pair it with logic gates, counters, and display drivers rather than a microcontroller for simple fixed-function instruments. Validate oscillator tolerance, output jitter, and reset behavior across the intended operating conditions.

🚗

Automotive and Transportation Timing Control

The CD4536BD3's programmable timer architecture can support repetitive timing functions in transportation equipment where a fixed logic timer is preferable to a general-purpose controller. The 24-stage counter supports long intervals, and multiple selectable outputs can serve different actuator or indicator timing sequences. A transportation design should use the exact qualified order variant and verify its temperature range, supply limits, output behavior, and automotive qualification status in the manufacturer documentation. The CD4536BD3 record does not by itself establish AEC-Q100 qualification, so that requirement must be confirmed separately for the selected suffix.

📱

Embedded Sequence and Retrigger Control

The CD4536BD3 is useful in fixed-function embedded systems that require delayed or retriggerable actions without allocating a microcontroller timer peripheral. Its MONO IN path supports monostable-style operation, while the counter outputs provide selectable timing intervals for sequential control stages. A typical implementation drives the clock from a system oscillator, selects an output stage digitally, and uses the resulting pulse to release another logic block. Ensure the trigger signal meets the input timing requirements and include suitable reset or power-on conditioning so the counter begins from a defined state.

What is the CD4536BD3?
The CD4536BD3 is a CMOS programmable timer with a 24-stage ripple-binary counter, selectable access to 16 output stages, and support for external-clock or on-chip RC-oscillator timing. According to the Texas Instruments CD4536B datasheet, it can count from 1 to 2^24, making it suitable for programmable-delay and periodic-event generation circuits. The device is supplied in a 16-pin SOIC package.
How many counter stages does the CD4536BD3 have?
The CD4536BD3 contains 24 ripple-binary counter stages and supports a maximum count of 2^24. The Texas Instruments CD4536B datasheet also describes an 8-BYPASS control that bypasses the first eight stages. When bypass is enabled, a 4-bit selection code can access one of 16 outputs from the remaining stages, providing selectable timing intervals within the same timer circuit.
Can the CD4536BD3 use an external clock?
Yes, the CD4536BD3 can be driven by an external clock or by an RC oscillator formed around its on-chip timing capability. The manufacturer identifies the CD4536B as a programmable timer with a maximum clock frequency of 5 MHz. The exact input waveform, voltage limits, and timing conditions must follow the Texas Instruments CD4536B datasheet, particularly when operating near the maximum frequency.
How do the A, B, C, and D inputs work on the CD4536BD3?
The A, B, C, and D inputs form a 4-bit code that selects one of 16 timer outputs. According to the Texas Instruments CD4536B datasheet, a logic 1 on the 8-BYPASS input bypasses the first eight counter stages so stage 9 becomes the first stage of the final 16-stage section. The selected output therefore determines the effective count or delay represented by the programmed selection code.
Where can I download the CD4536BD3 datasheet PDF?
The official Texas Instruments CD4536B datasheet PDF is available at https://www.ti.com/lit/ds/symlink/cd4536b.pdf. The document describes the 24-stage counter, external-clock and RC-oscillator operation, 8-BYPASS input, four-bit output selection, MONO IN behavior, and electrical characteristics. Use the pin-description table and operating limits in that document when assigning PCB nets or validating a new design.
Where can I find the CD4536BD3 pinout?
The CD4536BD3 pinout is defined in the pin-description table of the official Texas Instruments CD4536B datasheet. The D3 device uses a 16-pin SOIC package, and its external connections include clock or oscillator components, the 8-BYPASS control, A, B, C, and D selection inputs, timer outputs, and MONO IN. Assign every net directly from the datasheet table rather than inferring pin functions from another CD4536 package.
How is the CD4536BD3 monostable input disabled?
MONO IN is disabled by connecting it to ground through a resistor of 10 kΩ or higher, according to the Texas Instruments CD4536B datasheet. This prevents the monostable input from interfering with normal oscillator or counter operation. Confirm the complete input-bias and timing network in the manufacturer application guidance because the correct implementation depends on whether the design uses free-running, triggered, or bypassed counting.
What can replace the CD4536BD3 without changing the PCB?
The closest same-family choices are CD4536BE, CD4536BF, and CD4536BM in the 16-pin SOIC package, while CD4536BDWR is explicitly listed as a 5 MHz, 16-SOIC timer. These are suitable candidates to evaluate as pin-compatible replacements, but production substitution still requires comparison of supply-voltage limits, output drive, timing characteristics, and temperature grade in the manufacturer datasheets. Use the Request a Quote form on this page for replacement availability.
Is CD4536BDWR a drop-in replacement for CD4536BD3?
CD4536BDWR is the primary same-family candidate because the manufacturer listing identifies it as a 5 MHz, 16-SOIC programmable timer, matching the target's package and core timing architecture. The DWR suffix represents a different reel or packing option rather than a different timer function. Confirm device marking, supply range, temperature grade, and electrical performance before treating it as a production drop-in replacement.
CD4536BD3 vs CD4536BDWR: which is better for a new design?
CD4536BDWR is generally the more practical choice for a new surface-mount design because its commercial listing explicitly identifies a 5 MHz, 16-SOIC programmable timer. CD4536BD3 is the legacy orderable form represented by this product record. The functional architecture is the same CD4536B family, so the decisive checks are lifecycle preference, marking, temperature grade, electrical limits, and packaging rather than a change in timer topology.
When should I choose CD4536BD3 over another CD4536B variant?
Choose CD4536BD3 when the legacy 16-pin SOIC order code specifically matches an approved BOM, qualification record, or existing assembly documentation. For a new PCB, a maintained 16-pin SOIC order variant may simplify procurement and production planning. In either case, confirm that the selected suffix has the required supply voltage, operating-temperature grade, output-drive capability, and documented lifecycle status.
Is the CD4536BD3 suitable for industrial timing and control systems?
The CD4536BD3 can suit industrial timing and control systems when its supply-voltage, temperature, and output-drive limits match the installation. Its 24-stage counter supports intervals up to 2^24 clock counts, while the 16 selectable outputs allow several effective timing values. For safety-critical or extended-temperature installations, qualify the exact suffix and surrounding components rather than assuming the family name defines the automotive or industrial grade.
Where can I buy CD4536BD3 and what is its lead time?
Use the Request a Quote form on this page to request CD4536BD3 pricing, stock confirmation, quantity, and lead time from XAIPART. Current commercial terms can change by order quantity and supply status, so they should be confirmed for the exact 16-pin SOIC order code. Provide the required quantity, date code policy, target price, and shipping destination with the request to obtain an actionable quotation.
What is the price of CD4536BD3?
The current commercial price for CD4536BD3 should be obtained through the Request a Quote form on this page. Pricing depends on quantity, availability, date-code requirements, and packaging conditions, and it may differ from historical reference listings. Submit the required quantity and project timing so the quotation can reflect the exact order rather than a family-level or starting-price reference.
What are the key specifications of CD4536BD3 that engineers should know?
The key CD4536BD3 specifications are a 24-stage ripple-binary counter, a maximum count of 2^24, 16 selectable output stages, external-clock or RC-oscillator operation, and a maximum clock frequency of 5 MHz. The device is a 16-pin SOIC timer. According to the Texas Instruments CD4536B datasheet, the 4-bit A, B, C, and D inputs select the output when the first eight stages are bypassed.

工程参考数据: CD4536BD3 ——对比、设计指导和合规信息。

选型指南

Choose CD4536BD3 when an approved BOM, legacy assembly, or exact qualification record specifies that order code and when its electrical ratings have already been reviewed. For a new design, CD4536BDWR is often the more straightforward same-family selection because it is explicitly listed as a 5 MHz, 16-SOIC programmable timer and shares the target's package and core architecture. CD4536BE, CD4536BF, CD4536BM, and CD4536BN may also be considered when their suffix-specific supply range, temperature grade, output drive, and lifecycle status meet the installation requirements. None should be treated as an automatic substitution solely from the family name. Confirm the pinout, supply voltage, output levels, timing limits, temperature range, and manufacturer ordering status for the exact suffix before updating a released design.

与替代料对比

参数 本产品 CD4536BDWR CD4536BE CD4536BF CD4536BM CD4536BN
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 16-pin SOIC 16-pin SOIC - same 16-pin SOIC - same 16-pin SOIC - same 16-pin SOIC - same 16-pin SOIC - same
Product Type CMOS programmable timer Programmable timer IC CD4536B programmable timer CD4536B programmable timer CD4536B programmable timer CD4536B programmable timer
Counter Stages 24 ripple-binary stages 24 stages 24 stages 24 stages 24 stages 24 stages
Maximum Count 2^24 counts 2^24 counts 2^24 counts 2^24 counts 2^24 counts 2^24 counts
Maximum Clock Frequency 5 MHz 5 MHz 5 MHz family rating; confirm suffix 5 MHz family rating; confirm suffix 5 MHz family rating; confirm suffix 5 MHz family rating; confirm suffix
Programmable Output Stages 16 selectable outputs 16 selectable outputs 16 selectable outputs 16 selectable outputs 16 selectable outputs 16 selectable outputs
Timing Sources External clock or on-chip RC oscillator External clock or RC oscillator External clock or RC oscillator External clock or RC oscillator External clock or RC oscillator External clock or RC oscillator
Selection Inputs 4-bit A, B, C, and D selection 4-bit selection 4-bit selection 4-bit selection 4-bit selection 4-bit selection

关键差异点

  • Directly compatible ordering path within the CD4536B family (对比 CD4536BDWR)
  • Long programmable count range (对比 CD4536BE)
  • Programmable timing with external-clock flexibility (对比 CD4536BF)

设计说明

Place the external clock or RC oscillator components close to their associated CD4536BD3 pins and route the timing nets away from switching-regulator outputs and high-current switching nodes. The timer can operate up to 5 MHz, so long or adjacent clock traces may couple noise into the count sequence. Use a ground reference plane, minimize loop area, and keep the A, B, C, and D selection traces short enough to satisfy the setup and hold requirements shown in the manufacturer timing diagrams.

Do not assume that every CD4536B suffix has identical temperature, supply-voltage, or output-drive ratings. The D3 order code identifies the target assembly, but a proposed replacement must be checked against the exact ordering table, including the operating-temperature grade and supply limits. Also observe the documented 10 kΩ-or-higher resistance from MONO IN to ground when the monostable input is disabled; this prevents the input from interfering with the oscillator and counter.

Provide the bypass capacitance and supply sequencing required by the manufacturer datasheet, and keep power-distribution return paths short. CMOS timer inputs can respond to leakage and injected charge, so unused or slowly changing control inputs should not be allowed to float. When the circuit combines CD4536BD3 with modern digital logic, verify every input and output voltage against both devices' logic thresholds at the actual supply voltage; do not assume compatibility solely because both circuits use CMOS technology.

The 24-stage ripple counter permits long timing intervals, but the exact propagation behavior of each stage contributes to timing tolerance. For precise intervals, use a stable external clock and validate the selected output delay over supply-voltage and temperature corners. If the RC oscillator is used, calculate component tolerances and CMOS leakage effects before treating the nominal timing value as production-accurate. Do not change the selected counter stage during operation unless the timing diagram confirms that transition behavior is acceptable.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified for the exact CD4536BD3 order code. AEC-Q100 is marked not applicable because the device is a timer IC rather than an automotive-qualified power device; verify automotive requirements separately for the selected suffix.

相关搜索

CD4536BD3 datasheet CD4536BD3 datasheet pdf CD4536BD3 pinout CD4536BD3 equivalent CD4536BD3 replacement CD4536BD3 cross reference CD4536BD3 vs CD4536BDWR CD4536BD3 24-stage counter CD4536BD3 5 MHz 16-SOIC CD4536BD3 application circuit CD4536BD3 programmable timer CD4536BD3 price CD4536BD3 stock Texas Instruments CD4536BD3 CD4536BD3 footprint

相关元器件 & 术语

Texas Instruments CD4536BD3 CD4536B CD4536BDWR CD4536BE CD4536BF CD4536BM CD4536BN programmable timer CMOS logic clock and timing IC ripple-binary counter 24-stage counter external clock RC oscillator monostable oscillator programmable output selection 8-BYPASS input MONO IN 16-pin SOIC SOIC package family surface-mount device industrial timing pulse generation long-interval counter
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情