CY7C65621-56LTXIT - 2-Port USB 2.0 Hub Controller | Infineon
料号: CY7C65621-56LTXIT ✓ 量产中CY7C65621-56LTXIT 概述
A USB hub controller is an interface IC that coordinates communication between a USB host and one or more downstream USB devices. The USB 2.0 hub-controller category sits within interface ICs and broader system connectivity, providing device enumeration, bus arbitration, and downstream-port management for computers, industrial controllers, test equipment, and consumer peripherals. The CY7C65621 family is identified by the manufacturer as the EZ-USB HX2LP Lite low-power USB 2.0 hub-controller family.
The CY7C65621-56LTXIT is specified for a 3.15 V to 3.45 V operating supply, a 56-QFN package measuring 8 mm by 8 mm, and an exposed-pad thermal and electrical construction. Its I-grade ordering designation supports industrial-temperature qualification, while the tape-and-reel configuration is intended for automated surface-mount assembly. The controller is suitable for compact boards where USB connectivity, low-power operation, and a high pin count for dedicated USB and power functions are required.
Technically, the device belongs to the EZ-USB HX2LP family and supports Full-Speed and High-Speed USB hub-controller use cases. Its single-TT bus-powered configuration reduces the number of active high-speed links and helps simplify power architecture in two-port products. The exposed pad requires careful PCB thermal design, while the 0.5 mm package pitch demands fine-line assembly and board-layout controls.
Typical applications include USB docking stations, KVM peripherals, multifunction printers, laboratory data-acquisition equipment, industrial service interfaces, and compact embedded USB hubs. In a two-port adapter, the controller can sit between a host USB connection and two downstream connectors, reducing duplicated host-interface logic and centralizing port-control behavior.
Designers should follow the manufacturer datasheet for pin assignment, exposed-pad soldering, decoupling, and USB signal-routing guidance. Keep high-speed USB traces short and impedance controlled, provide the required local bypass capacitance, and connect the exposed pad to the intended ground-plane structure. Confirm the complete USB electrical, timing, and power requirements against the device documentation before releasing a PCB.
This product page combines the exact ordering information, package details, interface parameters, source links, application guidance, and carefully qualified replacement information to support faster engineering review and sourcing.
直接替换替代料: CY7C65621-56LTXIT ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: CY7C65621-56LTXIT (相同外形与封装尺寸) ——差异在于 Product Type, Package, Package Type, Temperature Grade, Mounting Style.
CY7C65620-56LTXIT
✅ 直接替换联系询价
查看数据手册 →CY7C65630-56LTXIT
✅ 直接替换联系询价
查看数据手册 →CY7C65631-56LTXI
✅ 直接替换联系询价
查看数据手册 →CY7C65621-56LTXIT 规格参数
| Device Type | USB 2.0 hub controller |
| Controller Family | EZ-USB HX2LP Lite |
| USB Version | USB 2.0 |
| USB Speed Support | Full-Speed and High-Speed |
| Number of Downstream Ports | 2 ports |
| Bus Topology | 2-port single-TT bus-powered application |
| 工作电源电压 | 3.15 V to 3.45 V |
| Process Technology | CMOS |
| Package Type | 56-pin QFN with exposed pad |
| Package Dimensions | 8 mm x 8 mm |
| Lead Pitch | 0.5 mm |
| Temperature Grade | I-grade |
| Shipping Format | Tape and reel |
| 安装类型 | Surface mount |
| Exposed Thermal Pad | Present |
CY7C65621-56LTXIT 8 mm x 8 mm 引脚配置指南
CY7C65621-56LTXIT(8 mm x 8 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: CY7C65621-56LTXIT.
请参阅 数据手册 以查看完整引脚配置。
典型应用
CY7C65621-56LTXIT 适用于 6 应用s: Two-Port USB Docking Station, Industrial USB Service Interface, KVM Peripheral and Dock, Multifunction Printer Hub, Laboratory Data-Acquisition Unit, Embedded USB Expansion Hub.
Two-Port USB Docking Station
The CY7C65621-56LTXIT fits compact two-port docking products that use a single-TT, bus-powered hub topology. Its 3.15 V to 3.45 V CMOS operating range supports a 3.3 V-class USB design, while the 56-QFN exposed-pad package preserves board area for connectors and interface circuitry. A typical implementation places the controller between the host USB upstream port and two downstream ports. The single-TT arrangement simplifies the active-link structure compared with a multi-TT hub, but the designer must still preserve high-speed trace geometry, provide local bypass capacitance, and dissipate exposed-pad heat through the board copper. Validate downstream-device charging, suspend, and enumeration behavior in the final product.
推荐
Industrial USB Service Interface
The I-grade CY7C65621-56LTXIT is appropriate for industrial equipment that exposes a compact USB service or configuration interface. Its two-port single-TT bus-powered configuration can provide one upstream host connection and two downstream service connectors without implementing a full multi-port hub topology. The controller operates from 3.15 V to 3.45 V, making it suitable for systems with a regulated 3.3 V rail. In industrial products, USB connectors can be susceptible to ESD and cabling transients, so the protection strategy must be evaluated separately from the controller. PCB planning should reserve short high-speed routes, continuous reference planes, and an exposed-pad land pattern suitable for reflow and thermal inspection.
推荐
KVM Peripheral and Dock
The CY7C65621-56LTXIT can serve as the USB hub element in a KVM peripheral, monitor dock, or compact workstation accessory. Its two downstream-port capability is useful when the enclosure offers multiple USB receptacles but the host interface remains a single USB connection. The 56-QFN exposed-pad construction requires careful fanout because the 0.5 mm pitch limits trace width and routing escape space. Designers should separate high-speed USB pairs from noisy switching supplies and analog sections, maintain impedance control, and provide the decoupling arrangement specified by the manufacturer. The controller's single-TT topology also offers a straightforward way to manage two downstream devices while keeping the implementation compact for a space-constrained accessory.
推荐
Multifunction Printer Hub
A multifunction printer or document-processing product can use the CY7C65621-56LTXIT to manage two USB-facing peripheral connections through a compact controller. The part supports USB 2.0 Full-Speed and High-Speed operation and is intended for a low-power, bus-powered application, helping the design avoid unnecessary active-link complexity. In this system, the controller can coordinate downstream traffic while the printer logic handles class-specific data. Engineering attention should focus on enumeration time, suspend and resume behavior, cable-length margins, and EMI containment. Place the exposed pad over an uninterrupted copper region, use the manufacturer land pattern, and route each high-speed differential pair over a continuous reference plane to minimize reflections and radiated emissions.
推荐
Laboratory Data-Acquisition Unit
The CY7C65621-56LTXIT is suitable for a laboratory data-acquisition unit that needs two USB connections from one host-facing USB controller. A two-port single-TT bus-powered design can connect a control computer to a peripheral while retaining a second service or data path. The controller's 3.15 V to 3.45 V operating range requires a stable regulated rail, while the exposed QFN pad provides an efficient path for heat into the PCB. To preserve measurement integrity, keep high-speed USB routing away from sensitive analog inputs and isolated barrier components. Apply the manufacturer's bypass and exposed-pad guidance, verify ground continuity between USB connectors and the controller, and test the completed assembly for conducted and radiated emissions under its intended operating mode.
推荐
Embedded USB Expansion Hub
The CY7C65621-56LTXIT supports an embedded USB expansion hub in industrial controllers, test fixtures, and compact embedded systems. The controller consolidates downstream-port management behind one host interface while the two-port single-TT configuration limits the active high-speed link count. Its 56-pin QFN body is compact but requires 0.5 mm pitch assembly capability and careful escape routing from the exposed pad. Place input and output bypass components directly at their associated supply pins, provide uninterrupted return paths beneath high-speed pairs, and avoid placing test points or isolation gaps in impedance-sensitive routes. Firmware and system validation should cover enumeration, bus-powered load limits, hot-plug behavior, and recovery from downstream over-current events.
推荐
推荐产品汇总
工程参考数据: CY7C65621-56LTXIT ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | CY7C65620-56LTXIT | CY7C65630-56LTXIT | CY7C65631-56LTXI |
|---|---|---|---|---|
| Package | 56-pin QFN exposed pad | 56-pin QFN exposed pad | 56-pin QFN exposed pad | 56-pin QFN exposed pad |
| Brand | Infineon | Infineon | Infineon | Infineon |
| Controller Family | EZ-USB HX2LP Lite | EZ-USB HX2LP family | EZ-USB HX2LP family | EZ-USB HX2LP family |
| USB Version | USB 2.0 | USB 2.0 | USB 2.0 | USB 2.0 |
| Package Dimensions | 8 mm x 8 mm | 56-pin QFN exposed pad | 56-pin QFN exposed pad | 56-pin QFN exposed pad |
| Lead Pitch | 0.5 mm | 0.5 mm | 0.5 mm | 0.5 mm |
关键差异点
- Documented two-port single-TT bus-powered configuration (对比 CY7C65631-56LTXI)
- Full-Speed and High-Speed USB 2.0 support (对比 CY7C65620-56LTXIT)
- Compact 0.5 mm-pitch exposed-pad construction (对比 CY7C65630-56LTXIT)
设计说明
Use the manufacturer QFN land pattern and exposed-pad geometry without adding unsupported thermal vias. Place the required bypass capacitors close to their assigned supply pins, provide a low-impedance ground reference beneath the device, and preserve uninterrupted routing for high-speed differential pairs. The 0.5 mm pitch requires careful fanout between the QFN body and the exposed pad, so confirm courtyard clearance before placing adjacent components.
Route each USB high-speed differential pair as a length-matched pair over a continuous reference plane, with minimal vias and no stubs. Keep the upstream and downstream signal paths away from switching inductors, display converters, and other high-slew-current nets. Check the board stack-up and controlled-impedance geometry against the manufacturer USB layout guidance, and inspect the finished assembly for opens, shorts, and voiding around the exposed pad.
The CY7C65621-56LTXIT operates from a 3.15 V to 3.45 V CMOS supply, so the local 3.3 V rail must remain within that range under startup, steady-state, and bus-load conditions. Place decoupling components at the device pins rather than at the upstream regulator. If downstream devices draw significant bus power, separate their budget from the controller supply and verify current sharing, inrush behavior, and over-current response at the system level.
Do not treat a matching QFN body as proof of unconditional interchangeability. Before replacing the CY7C65621-56LTXIT, compare the complete ordering table, pin descriptions, supported hub features, firmware expectations, USB timing, and electrical limits. Also confirm whether exposed-pad connections and thermal requirements are identical. A footprint-compatible candidate still requires functional and board-level validation before production use.
合规信息
The manufacturer product page identifies an I-grade industrial ordering configuration. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations are not stated in the source information and remain unknown.