Infineon

CY7C65621-56LTXIT - 2-Port USB 2.0 Hub Controller | Infineon

部品番号: CY7C65621-56LTXIT ✓ 生産中
3.15 V to 3.45 V Vdss 56-pin QFN with exposed pad Package Full-Speed and High-Speed Speed
MOQ: 1 |

CY7C65621-56LTXIT 概要

The Infineon CY7C65621-56LTXIT is an EZ-USB HX2LP Lite low-power USB 2.0 hub controller with a 56-pin QFN exposed-pad package and support for a two-port single-TT bus-powered application. It operates from a 3.15 V to 3.45 V CMOS supply, provides USB Full-Speed and High-Speed hub-controller functionality, and is designed for embedded USB hub, docking, and peripheral-expansion designs.

A USB hub controller is an interface IC that coordinates communication between a USB host and one or more downstream USB devices. The USB 2.0 hub-controller category sits within interface ICs and broader system connectivity, providing device enumeration, bus arbitration, and downstream-port management for computers, industrial controllers, test equipment, and consumer peripherals. The CY7C65621 family is identified by the manufacturer as the EZ-USB HX2LP Lite low-power USB 2.0 hub-controller family.

The CY7C65621-56LTXIT is specified for a 3.15 V to 3.45 V operating supply, a 56-QFN package measuring 8 mm by 8 mm, and an exposed-pad thermal and electrical construction. Its I-grade ordering designation supports industrial-temperature qualification, while the tape-and-reel configuration is intended for automated surface-mount assembly. The controller is suitable for compact boards where USB connectivity, low-power operation, and a high pin count for dedicated USB and power functions are required.

Technically, the device belongs to the EZ-USB HX2LP family and supports Full-Speed and High-Speed USB hub-controller use cases. Its single-TT bus-powered configuration reduces the number of active high-speed links and helps simplify power architecture in two-port products. The exposed pad requires careful PCB thermal design, while the 0.5 mm package pitch demands fine-line assembly and board-layout controls.

Typical applications include USB docking stations, KVM peripherals, multifunction printers, laboratory data-acquisition equipment, industrial service interfaces, and compact embedded USB hubs. In a two-port adapter, the controller can sit between a host USB connection and two downstream connectors, reducing duplicated host-interface logic and centralizing port-control behavior.

Designers should follow the manufacturer datasheet for pin assignment, exposed-pad soldering, decoupling, and USB signal-routing guidance. Keep high-speed USB traces short and impedance controlled, provide the required local bypass capacitance, and connect the exposed pad to the intended ground-plane structure. Confirm the complete USB electrical, timing, and power requirements against the device documentation before releasing a PCB.

This product page combines the exact ordering information, package details, interface parameters, source links, application guidance, and carefully qualified replacement information to support faster engineering review and sourcing.

ドロップイン代替品: CY7C65621-56LTXIT — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: CY7C65621-56LTXIT (同一形状・フットプリント) — 相違点: Product Type, Package, Package Type, Temperature Grade, Mounting Style.

Infineon
Product Type: Low-power USB 2.0 hub controller
Package: 56-pin QFN with exposed pad
Temperature Grade: Industrial
比較対象 CY7C65621-56LTXIT →
Infineon
Product Type: USB 2.0 Hub Controller
Package: 56-QFN (8x8 mm) with Exposed Pad
比較対象 CY7C65621-56LTXIT →
Infineon
Package Type: 56-QFN (8x8 mm, 0.90 mm height, MO-220)
比較対象 CY7C65621-56LTXIT →
Infineon
Product Type: 4-port single-TT USB 2.0 hub controller
Package Type: 56-QFN
Temperature Grade: Industrial grade
比較対象 CY7C65621-56LTXIT →
Infineon
Product Type: USB 2.0 hub controller
Package: 56-pin QFN, 8 mm x 8 mm
Package Type: QFN
比較対象 CY7C65621-56LTXIT →
Infineon
Product Type: USB 2.0 Hub Controller (EZ-USB HX2LP Lite)
Package: 56-QFN (8x8 mm)
Mounting Style: SMD/SMT
比較対象 CY7C65621-56LTXIT →

CY7C65620-56LTXIT

✅ ドロップイン
Infineon
📦 56-pin QFN exposed pad
Low-power USB 2.0 hub controller · EZ-USB HX2LP · USB 2.0 · Full-Speed and High-Speed · 2 ports · 1 port · 3.3 V · 56-pin QFN with exposed pad

価格はお問い合わせください

データシートを見る →

CY7C65630-56LTXIT

✅ ドロップイン
Infineon
📦 56-pin QFN exposed pad
4-port single-TT USB 2.0 hub controller · USB 2.0 high speed · 4 ports · Single-TT · 3.15 V to 3.45 V · Configurable GPIOs · LED indicator support · EEPROM support

価格はお問い合わせください

データシートを見る →

CY7C65631-56LTXI

✅ ドロップイン
Infineon
📦 56-pin QFN exposed pad
USB 2.0 hub controller · EZ-USB HX2LP · USB 2.0 · 4 ports · 1 single transaction translator · Bus-powered and self-powered · 56-pin QFN, 8 mm x 8 mm · QFN

価格はお問い合わせください

データシートを見る →

CY7C65621-56LTXIT 仕様

Device Type USB 2.0 hub controller
Controller Family EZ-USB HX2LP Lite
USB Version USB 2.0
USB Speed Support Full-Speed and High-Speed
Number of Downstream Ports 2 ports
Bus Topology 2-port single-TT bus-powered application
動作電源電圧 3.15 V to 3.45 V
Process Technology CMOS
Package Type 56-pin QFN with exposed pad
Package Dimensions 8 mm x 8 mm
Lead Pitch 0.5 mm
Temperature Grade I-grade
Shipping Format Tape and reel
実装タイプ Surface mount
Exposed Thermal Pad Present

CY7C65621-56LTXIT 8 mm x 8 mm ピン配置ガイド

CY7C65621-56LTXIT (8 mm x 8 mm パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

CY7C65621-56LTXIT の 8 mm x 8 mm パッケージピン配置図

詳細なピン配置データはありません: CY7C65621-56LTXIT.

詳細は データシート をご参照ください。

主な用途

CY7C65621-56LTXIT の用途: 6 件s: Two-Port USB Docking Station, Industrial USB Service Interface, KVM Peripheral and Dock, Multifunction Printer Hub, Laboratory Data-Acquisition Unit, Embedded USB Expansion Hub.

🔌

Two-Port USB Docking Station

The CY7C65621-56LTXIT fits compact two-port docking products that use a single-TT, bus-powered hub topology. Its 3.15 V to 3.45 V CMOS operating range supports a 3.3 V-class USB design, while the 56-QFN exposed-pad package preserves board area for connectors and interface circuitry. A typical implementation places the controller between the host USB upstream port and two downstream ports. The single-TT arrangement simplifies the active-link structure compared with a multi-TT hub, but the designer must still preserve high-speed trace geometry, provide local bypass capacitance, and dissipate exposed-pad heat through the board copper. Validate downstream-device charging, suspend, and enumeration behavior in the final product.

🏭

Industrial USB Service Interface

The I-grade CY7C65621-56LTXIT is appropriate for industrial equipment that exposes a compact USB service or configuration interface. Its two-port single-TT bus-powered configuration can provide one upstream host connection and two downstream service connectors without implementing a full multi-port hub topology. The controller operates from 3.15 V to 3.45 V, making it suitable for systems with a regulated 3.3 V rail. In industrial products, USB connectors can be susceptible to ESD and cabling transients, so the protection strategy must be evaluated separately from the controller. PCB planning should reserve short high-speed routes, continuous reference planes, and an exposed-pad land pattern suitable for reflow and thermal inspection.

🖥️

KVM Peripheral and Dock

The CY7C65621-56LTXIT can serve as the USB hub element in a KVM peripheral, monitor dock, or compact workstation accessory. Its two downstream-port capability is useful when the enclosure offers multiple USB receptacles but the host interface remains a single USB connection. The 56-QFN exposed-pad construction requires careful fanout because the 0.5 mm pitch limits trace width and routing escape space. Designers should separate high-speed USB pairs from noisy switching supplies and analog sections, maintain impedance control, and provide the decoupling arrangement specified by the manufacturer. The controller's single-TT topology also offers a straightforward way to manage two downstream devices while keeping the implementation compact for a space-constrained accessory.

🖨️

Multifunction Printer Hub

A multifunction printer or document-processing product can use the CY7C65621-56LTXIT to manage two USB-facing peripheral connections through a compact controller. The part supports USB 2.0 Full-Speed and High-Speed operation and is intended for a low-power, bus-powered application, helping the design avoid unnecessary active-link complexity. In this system, the controller can coordinate downstream traffic while the printer logic handles class-specific data. Engineering attention should focus on enumeration time, suspend and resume behavior, cable-length margins, and EMI containment. Place the exposed pad over an uninterrupted copper region, use the manufacturer land pattern, and route each high-speed differential pair over a continuous reference plane to minimize reflections and radiated emissions.

🔬

Laboratory Data-Acquisition Unit

The CY7C65621-56LTXIT is suitable for a laboratory data-acquisition unit that needs two USB connections from one host-facing USB controller. A two-port single-TT bus-powered design can connect a control computer to a peripheral while retaining a second service or data path. The controller's 3.15 V to 3.45 V operating range requires a stable regulated rail, while the exposed QFN pad provides an efficient path for heat into the PCB. To preserve measurement integrity, keep high-speed USB routing away from sensitive analog inputs and isolated barrier components. Apply the manufacturer's bypass and exposed-pad guidance, verify ground continuity between USB connectors and the controller, and test the completed assembly for conducted and radiated emissions under its intended operating mode.

🧩

Embedded USB Expansion Hub

The CY7C65621-56LTXIT supports an embedded USB expansion hub in industrial controllers, test fixtures, and compact embedded systems. The controller consolidates downstream-port management behind one host interface while the two-port single-TT configuration limits the active high-speed link count. Its 56-pin QFN body is compact but requires 0.5 mm pitch assembly capability and careful escape routing from the exposed pad. Place input and output bypass components directly at their associated supply pins, provide uninterrupted return paths beneath high-speed pairs, and avoid placing test points or isolation gaps in impedance-sensitive routes. Firmware and system validation should cover enumeration, bus-powered load limits, hot-plug behavior, and recovery from downstream over-current events.

What is CY7C65621-56LTXIT?
The CY7C65621-56LTXIT is an Infineon EZ-USB HX2LP Lite low-power USB 2.0 hub controller configured for a two-port single-TT bus-powered application. The manufacturer identifies the device as a member of the EZ-USB HX2LP Lite family and specifies Full-Speed and High-Speed USB operation. Its 56-pin QFN exposed-pad package uses an 8 mm by 8 mm body with a 0.5 mm lead pitch.
What is the operating voltage of CY7C65621-56LTXIT?
The CY7C65621-56LTXIT operates from a 3.15 V to 3.45 V CMOS supply. According to the Infineon product page, this is a 3.3 V-class USB hub controller intended for the two-port single-TT bus-powered configuration. A design should keep the supply within those limits and verify startup, decoupling, and load-transient requirements against the manufacturer datasheet.
Where can I download the CY7C65621 datasheet PDF?
The CY7C65621 datasheet PDF is available through the Infineon product page at https://www.infineon.com/part/CY7C65621-56LTXIT. That page provides the ordering information, data-sheet link, parameters, and package details for the CY7C65621-56LTXIT. Use the manufacturer document for the definitive pin descriptions, timing values, USB electrical requirements, and exposed-pad land pattern.
Where can I find the CY7C65621-56LTXIT pinout?
The CY7C65621-56LTXIT pinout is shown in the manufacturer data sheet linked from the Infineon product page. The component is a 56-pin QFN with an exposed pad and 0.5 mm pitch, so the package drawing and pin-description table should be used when assigning PCB nets. Do not infer exposed-pad connectivity from the body-pin numbering alone; confirm it in the device documentation.
What package does CY7C65621-56LTXIT use?
The CY7C65621-56LTXIT uses a 56-pin QFN package with an exposed pad, measuring 8 mm by 8 mm with a 0.5 mm lead pitch. According to the Infineon product page, the I-grade device is supplied in tape-and-reel packaging for surface-mount assembly. The exposed pad must be incorporated into the PCB land pattern and thermal design.
What is the CY7C65621-56LTXIT used for?
The CY7C65621-56LTXIT is used as a low-power USB 2.0 hub controller in two-port bus-powered products. Typical designs include docking stations, KVM peripherals, multifunction printers, industrial service interfaces, laboratory equipment, and embedded USB expansion hubs. Its single-TT topology provides a practical implementation for systems that need two downstream USB connections from one host interface.
What can replace CY7C65621-56LTXIT?
The closest identified drop-in candidates are the same-package Infineon members CY7C65620-56LTXIT, CY7C65630-56LTXIT, and CY7C65631-56LTXI. Their functional differences must be checked against the required port count, hub features, firmware, and USB electrical behavior before substitution. A footprint match alone does not establish that every application can be replaced without hardware or firmware changes.
Is CY7C65621-56LTXIT the same as CY7C65631-56LTXI?
No. The CY7C65621-56LTXIT and CY7C65631-56LTXI belong to the EZ-USB HX2LP controller family and are compared as related parts, but they are not automatically identical. The exact suffix and ordering information identify separate configurations. Engineers should compare the manufacturer ordering tables, pin functions, supported hub features, and required application behavior before treating one as a replacement for the other.
When should I choose CY7C65621-56LTXIT over CY7C65631-56LTXI?
Choose the CY7C65621-56LTXIT when the product requires its documented two-port single-TT bus-powered configuration, I-grade construction, and 56-QFN exposed-pad footprint. Choose the CY7C65631-56LTXI when its documented feature set better matches the required hub behavior or application topology. The final decision should follow a complete comparison of the manufacturer ordering information, pin descriptions, and USB functional requirements.
Is CY7C65621-56LTXIT suitable for industrial USB hubs?
The CY7C65621-56LTXIT is ordered as an I-grade device, making its industrial temperature designation relevant to industrial USB-hub designs. The manufacturer page identifies the I-grade construction, 3.15 V to 3.45 V operating range, and tape-and-reel packaging. Final suitability still depends on the complete operating-temperature limits, agency requirements, environmental exposure, and USB qualification obligations for the finished system.
Where to buy CY7C65621-56LTXIT online?
Use the Request a Quote form on this page to ask about CY7C65621-56LTXIT availability, minimum order quantity, and order routing. The manufacturer product page is the appropriate technical reference for the exact ordering code. Quote requests let procurement confirm current lifecycle, stock, and delivery terms without relying on a stale listing or an unverified generic price.
What is the price of CY7C65621-56LTXIT?
The current commercial price for the CY7C65621-56LTXIT should be obtained through the Request a Quote form on this page. The structured offer on this page reflects only qualifying quantity-tier listings for the exact ordering code. Procurement should submit the required quantity and delivery location to obtain a current quote and confirm any packing or minimum-order requirements.
What is the lead time for CY7C65621-56LTXIT?
Request the current CY7C65621-56LTXIT lead time through the Request a Quote form on this page. Lead time can depend on available inventory, factory scheduling, order quantity, and the selected shipment destination, so it should be confirmed for each purchase. The manufacturer ordering page remains the reference for the exact I-grade, tape-and-reel configuration.
Is CY7C65621-56LTXIT in stock?
Submit a stock and lead-time request through the Request a Quote form on this page for the CY7C65621-56LTXIT. Inventory status changes continuously and should be confirmed against the required quantity and package format. The manufacturer product page identifies the exact ordering code and I-grade tape-and-reel configuration for procurement review.
What are the key specifications of CY7C65621-56LTXIT that engineers should know?
The key specifications are a 3.15 V to 3.45 V CMOS supply, USB 2.0 Full-Speed and High-Speed support, a two-port single-TT bus-powered topology, and a 56-pin QFN exposed-pad package measuring 8 mm by 8 mm. The 0.5 mm pitch and exposed thermal pad strongly influence PCB layout, assembly, and thermal design. According to the Infineon product page, the device is an I-grade tape-and-reel part.

エンジニアリング参考データ: CY7C65621-56LTXIT — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the CY7C65621-56LTXIT for a compact, low-power, two-port USB 2.0 design that specifically uses the documented single-TT bus-powered topology. Its 3.15 V to 3.45 V operating range, I-grade ordering designation, and 56-QFN exposed-pad package suit regulated 3.3 V systems with manufacturing capability for 0.5 mm pitch parts. Consider the CY7C65620-56LTXIT when its family features match the required hub behavior more closely, and evaluate the CY7C65630-56LTXIT when its port topology or feature set is preferable. The CY7C65631-56LTXI is another same-family option to compare when its ordering configuration provides a better functional match. Because all candidates share a related package family, final selection should be based on the manufacturer ordering tables, pin descriptions, USB timing, power requirements, firmware, and application behavior rather than package size alone.

代替品との比較

パラメータ この製品 CY7C65620-56LTXIT CY7C65630-56LTXIT CY7C65631-56LTXI
Package 56-pin QFN exposed pad 56-pin QFN exposed pad 56-pin QFN exposed pad 56-pin QFN exposed pad
Brand Infineon Infineon Infineon Infineon
Controller Family EZ-USB HX2LP Lite EZ-USB HX2LP family EZ-USB HX2LP family EZ-USB HX2LP family
USB Version USB 2.0 USB 2.0 USB 2.0 USB 2.0
Package Dimensions 8 mm x 8 mm 56-pin QFN exposed pad 56-pin QFN exposed pad 56-pin QFN exposed pad
Lead Pitch 0.5 mm 0.5 mm 0.5 mm 0.5 mm

主な差別化要因

  • Documented two-port single-TT bus-powered configuration (vs CY7C65631-56LTXI)
  • Full-Speed and High-Speed USB 2.0 support (vs CY7C65620-56LTXIT)
  • Compact 0.5 mm-pitch exposed-pad construction (vs CY7C65630-56LTXIT)

設計ノート

Use the manufacturer QFN land pattern and exposed-pad geometry without adding unsupported thermal vias. Place the required bypass capacitors close to their assigned supply pins, provide a low-impedance ground reference beneath the device, and preserve uninterrupted routing for high-speed differential pairs. The 0.5 mm pitch requires careful fanout between the QFN body and the exposed pad, so confirm courtyard clearance before placing adjacent components.

Route each USB high-speed differential pair as a length-matched pair over a continuous reference plane, with minimal vias and no stubs. Keep the upstream and downstream signal paths away from switching inductors, display converters, and other high-slew-current nets. Check the board stack-up and controlled-impedance geometry against the manufacturer USB layout guidance, and inspect the finished assembly for opens, shorts, and voiding around the exposed pad.

The CY7C65621-56LTXIT operates from a 3.15 V to 3.45 V CMOS supply, so the local 3.3 V rail must remain within that range under startup, steady-state, and bus-load conditions. Place decoupling components at the device pins rather than at the upstream regulator. If downstream devices draw significant bus power, separate their budget from the controller supply and verify current sharing, inrush behavior, and over-current response at the system level.

Do not treat a matching QFN body as proof of unconditional interchangeability. Before replacing the CY7C65621-56LTXIT, compare the complete ordering table, pin descriptions, supported hub features, firmware expectations, USB timing, and electrical limits. Also confirm whether exposed-pad connections and thermal requirements are identical. A footprint-compatible candidate still requires functional and board-level validation before production use.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The manufacturer product page identifies an I-grade industrial ordering configuration. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations are not stated in the source information and remain unknown.

データ検証日: 2026-11-10 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

cy7c65621-56ltxi driver CY7C65621-56LTXIT datasheet CY7C65621-56LTXIT datasheet pdf CY7C65621-56LTXIT pinout CY7C65621-56LTXIT schematic CY7C65621-56LTXIT equivalent CY7C65621-56LTXIT replacement CY7C65621-56LTXIT cross reference CY7C65621-56LTXIT vs CY7C65631-56LTXI CY7C65621-56LTXIT footprint Infineon CY7C65621-56LTXIT CY7C65621 56 QFN USB hub CY7C65621-56LTXIT price CY7C65621-56LTXIT stock CY7C65621 USB 2.0 hub controller

関連部品&用語

Infineon Cypress Semiconductor CY7C65621-56LTXIT CY7C65620-56LTXIT CY7C65630-56LTXIT CY7C65631-56LTXI EZ-USB HX2LP Lite USB 2.0 USB hub controller interface IC Full-Speed USB High-Speed USB single-TT topology bus-powered USB 56-pin QFN exposed pad 0.5 mm pitch CMOS 3.3 V USB docking station industrial USB hub KVM peripheral multifunction printer USB signal integrity
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示