Analog Devices

DG413CY+T - Quad SPST Analog Switch | Analog Devices

料号: DG413CY+T ✓ 量产中
45 ohm maximum Rds(on) 16-pin NSOIC Package
最小起订量: 1 |

DG413CY+T 概述

The Analog Devices DG413CY+T is an improved quad, single-pole single-throw analog switch with four independent 1:1 switching circuits, a 45 ohm on-resistance rating, and a 16-pin NSOIC package. It is designed for routing analog signals between circuit nodes while providing complementary normally-open and normally-closed paths in each switch section.

An analog switch is an integrated semiconductor device that connects or disconnects an electrical signal under digital control. The DG413 belongs to the analog switch and multiplexer hierarchy within interface ICs. Its four SPST sections can operate independently, making it suitable for signal-path routing, test systems, measurement circuits, and analog signal-conditioning equipment.

Key features include four switch circuits, 1:1 signal routing, a 45 ohm maximum on-resistance specification, on-resistance matching between switches of 3 ohm maximum, and guaranteed on-resistance flatness of 4 ohm maximum over the signal range. The redesigned switch family also supports bidirectional signal conduction, allowing each switch path to conduct equally well in either direction.

The device operates across positive and negative analog signal ranges identified for the DG413 family. Its low on-resistance matching improves consistency when several switch sections are used in parallel or when signal attenuation must remain predictable across channels. Because it is an analog switch rather than a mechanical relay, the part provides compact, solid-state signal routing and is controlled by digital logic levels.

Typical applications include four-channel analog signal routing, bidirectional test-point multiplexing, sample-and-hold interfaces, instrumentation signal paths, and control systems that require independent normally-open or normally-closed contacts. Each circuit can be controlled separately when the host system requires four distinct routing decisions.

PCB design should preserve the manufacturer's recommended pin arrangement and provide adequate clearance around the 16-pin NSOIC body. Because the switch handles analog signals, trace resistance, connector leakage, off-state behavior, and control-logic timing can influence overall system accuracy. Review the DG413 datasheet pin description and electrical characteristics before finalizing signal paths.

This product page combines manufacturer specifications, package information, verified sourcing references, and practical design guidance. It also identifies the directly comparable 16-SOIC alternatives that can be evaluated when designing a new board or replacing an existing DG413-family device.

直接替换替代料: DG413CY+T ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: DG413CY+T (相同外形与封装尺寸) ——差异在于 Package, Number of Channels, Number of Circuits.

Analog Devices
Package: 16-SOIC, 0.154 inch width, 3.90 mm width
Number of Channels: 4
Number of Circuits: 4
对比 DG413CY+T →
Vishay Intertechnology
Package: SOIC-16 (16-SOIC)
Number of Channels: 4 (SPST, normally open)
对比 DG413CY+T →

DG413DY+

✅ 直接替换
Analog Devices
📦 16-SOIC
SPST · 4 · 4 · 1:1 · 45 Ω maximum · 3 Ω maximum · 4 Ω maximum · 4.5 V to 30 V

联系询价

查看数据手册 →

DG413DY-E3

✅ 直接替换
Vishay Intertechnology
📦 16-SOIC
Quad SPST CMOS Analog Switch · 4 (SPST, normally open) · 4 Circuit IC Switch, 1:1 · 35 ohm (typ) · 110 ns (typ) · 15 V · 44 V · 0.35 uW (ultra low)

联系询价

查看数据手册 →

DG413CY+T 最大额定值与电气特性

Number of Circuits 4 circuits
Switch Configuration 1:1 SPST
On-Resistance 45 ohm maximum
On-Resistance Matching 3 ohm maximum between switches
On-Resistance Flatness 4 ohm maximum over signal range
Signal Conduction Direction Bidirectional
Positive Analog Signal Range 10 V to 30 V
Negative Analog Signal Range -4.5 V to -20 V
封装 16-pin NSOIC
引脚数 16 pins
安装类型 Surface mount
Temperature Grade Commercial

DG413CY+T 16-pin nsoic 引脚配置指南

DG413CY+T(16-pin nsoic 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

DG413CY+T 的 16-pin nsoic 封装引脚图

暂无详细引脚数据: DG413CY+T.

请参阅 数据手册 以查看完整引脚配置。

典型应用

DG413CY+T 适用于 6 应用s: Bidirectional Analog Signal Routing, Automated Test and Measurement Systems, Sample-and-Hold Signal Interfaces, Industrial Control Signal Conditioning, Audio and Communication Path Switching, Portable and Embedded Analog Routing.

🔧

Bidirectional Analog Signal Routing

The DG413CY+T fits four-channel bidirectional analog routing because it provides four independent 1:1 SPST circuits that conduct equally well in either direction. Its 45 ohm maximum on-resistance defines the worst-case path resistance, while the 3 ohm maximum matching specification helps maintain consistent behavior between channels. A four-way analog multiplexer, dual-source selector, or programmable signal router can use the switch sections independently. Engineers should calculate the resulting signal attenuation against the source impedance and acquisition circuitry, and confirm control timing from the manufacturer datasheet.

🖥️

Automated Test and Measurement Systems

The DG413CY+T can route a measurement path among multiple analog sources, instrument inputs, or test nodes because its four SPST sections support independent control. The 45 ohm maximum on-resistance and 4 ohm maximum flatness are important when interpreting measured voltage errors and attenuation. For automated test equipment, place the switch close to the DUT or measurement interface to limit additional trace resistance and improve routing repeatability. Validate leakage, switching time, and control levels against the complete Analog Devices DG413 datasheet before defining the test timing budget.

📡

Sample-and-Hold Signal Interfaces

The DG413CY+T is appropriate for sample-and-hold front ends that require controlled connections between a sampled signal and one of several circuit nodes. Its four independently operated SPST paths allow a compact implementation of a multi-input or multi-stage analog sampler. The 45 ohm maximum on-resistance should be included in the settling-time calculation, while the 3 ohm maximum channel matching supports predictable comparisons between sampled paths. Use short, low-impedance traces and keep the switched node away from high-impedance leakage-sensitive inputs to preserve measurement accuracy.

🏭

Industrial Control Signal Conditioning

The DG413CY+T can select and route control or feedback signals in industrial equipment where a compact, electronically controlled analog switch is needed. Its 1:1 SPST configuration supports direct signal-path isolation rather than multiplexer-style sharing of multiple inputs into one output. Four channels allow a controller to manage distinct sensor, actuator, or feedback paths while retaining independent state control. Confirm the control voltage levels, supply requirements, and absolute maximum ratings against the manufacturer datasheet, and ensure the selected signal range remains compatible with both positive and negative operating conditions.

🌐

Audio and Communication Path Switching

The DG413CY+T can switch low-frequency audio or communication-related analog paths when the design accepts a 45 ohm maximum series resistance. The 3 ohm maximum matching between switches is useful when several channels must have similar insertion loss, and the flatness specification limits resistance variation across the signal range. Four SPST sections make it practical to create source selectors, mute paths, or feedback-routing networks. Avoid using the switch for high-impedance microphone inputs without accounting for its on-resistance, leakage, and any downstream loading.

📱

Portable and Embedded Analog Routing

The DG413CY+T supports compact analog routing in portable instruments and embedded controller systems that need four solid-state switch channels. Its 16-pin NSOIC surface-mount package simplifies board integration compared with mechanical relays, while independent control allows unused channels to remain isolated. In a portable design, account for the switch resistance when sizing input and output networks, and keep control traces away from sensitive analog nets to reduce coupling. Confirm operating temperature, supply voltage, and lifecycle requirements in the family documentation before releasing a production design.

What is the DG413CY+T?
The DG413CY+T is an improved quad, single-pole single-throw analog switch manufactured by Analog Devices, formerly Maxim Integrated. It contains four independently controlled 1:1 switching circuits, has a 45 ohm on-resistance rating, and is packaged in a 16-pin NSOIC. According to the Analog Devices DG413 product page and datasheet, the switch is designed for general-purpose analog signal routing.
How many independent switches does DG413CY+T contain?
The DG413CY+T contains four independent SPST switching circuits. Each circuit can connect or disconnect its associated analog signal path according to its own control input. The Analog Devices DG413 product page identifies the device as a quad analog switch, while the manufacturer datasheet describes it as an improved 1:1 analog switch suitable for bidirectional signal routing.
What is the on-resistance of the DG413CY+T?
The DG413CY+T has a maximum on-resistance rating of 45 ohm. The Analog Devices DG413 family also provides matching between switches of 3 ohm maximum and on-resistance flatness of 4 ohm maximum over the signal range. These characteristics help engineers evaluate channel-to-channel consistency and signal attenuation in precision routing applications.
What package does the DG413CY+T use?
The DG413CY+T is supplied in a 16-pin NSOIC surface-mount package. Product listings describe the component as a 16-SOIC device, while the detailed ordering information identifies the package as NSOIC. Use the manufacturer pin-description table and land pattern when assigning PCB nets and placing the device on a new layout.
Where can I download the DG413CY+T datasheet PDF?
The official DG413 family datasheet is available through the Analog Devices product page at https://www.analog.com/en/products/dg413.html. The DG413CY+T is an orderable member of that family, and the manufacturer documentation contains the electrical characteristics, truth tables, pin descriptions, and application details required for design review.
Where can I find the DG413CY+T pinout?
The DG413CY+T pinout is defined in the pin-description table of the Analog Devices DG413 datasheet. The device uses a 16-pin NSOIC package, but pin numbering and switch-terminal assignments should be transcribed directly from the manufacturer diagram rather than inferred from generic SOIC conventions. The package drawing also identifies the pin-1 orientation used by the board layout.
What can replace the DG413CY+T on the same 16-SOIC footprint?
The DG413DY+ from Analog Devices and the DG413DY-E3 from Vishay Intertechnology are the closest published 16-SOIC alternatives in the DG413 cross-reference family. The DG413DY+ retains the 45 ohm switching rating, while the Vishay DG413DY-E3 is listed at 35 ohm maximum on-resistance. Confirm terminal-level pin compatibility in the manufacturer datasheet before replacing an assembled board.
Is the Vishay DG413DY-E3 a drop-in replacement for DG413CY+T?
The Vishay DG413DY-E3 is a candidate drop-in replacement because it uses a 16-SOIC package and is identified as a four-circuit 1:1 analog switch. Its listed maximum on-resistance is 35 ohm, which is 10 ohm or about 22 percent lower than the 45 ohm rating of the DG413CY+T. Because a lower on-resistance can affect signal attenuation, verify every electrical limit and the exact terminal assignment before production use.
When should I choose the DG413CY+T instead of the DG413DY+?
Choose the DG413CY+T when the specific commercial-grade DG413CY order code and its tape-and-reel production configuration are required. The DG413DY+ is also a four-circuit, 1:1, 16-SOIC switch with a 45 ohm on-resistance rating, so its core switching function is closely aligned. The final selection should follow exact order-code requirements, terminal assignments, and purchasing availability rather than headline specifications alone.
Is DG413CY+T suitable for bidirectional analog signal routing?
Yes, the DG413CY+T is suitable for bidirectional analog signal routing because the DG413 switch family is designed to conduct equally well in either direction. Its 45 ohm maximum on-resistance, 3 ohm maximum matching between switches, and 4 ohm maximum flatness provide the principal electrical criteria for evaluating insertion loss and channel consistency.
Where can I buy DG413CY+T and check current stock?
Use the Request a Quote form on this page to request current DG413CY+T availability, order quantities, and delivery scheduling for the 16-pin NSOIC configuration. Commercial status should be confirmed for the exact order code because inventory and lead time can change by lot and production schedule. A direct quote also helps confirm whether an alternative package or grade is needed.
What is the current price of DG413CY+T?
Use the Request a Quote form on this page for the current DG413CY+T unit cost and quantity pricing. Pricing can vary with order quantity, production lot, packaging configuration, and market conditions, so an archived catalog amount should not be treated as a current quotation. The form can also confirm required reel quantities and production availability.
What is the lead time for DG413CY+T?
Request the current lead time through the Request a Quote form on this page, including the required order quantity and acceptable reel configuration. Analog Devices lists the DG413 family in production, but individual order codes can still be affected by assembly schedules, lot availability, and allocation. A quote response provides the most appropriate production commitment for the requested quantity.
Is the DG413CY+T in stock?
Current DG413CY+T stock must be confirmed through the Request a Quote form on this page. The manufacturer lists the DG413 family as production, while exact suffix availability can vary by package and reel configuration. Provide the required quantity and target date so the supplier can confirm current inventory and the earliest delivery allocation.
What are the key specifications of DG413CY+T that engineers should know?
The DG413CY+T is a four-circuit, 1:1 SPST analog switch in a 16-pin NSOIC package. Key specifications include 45 ohm maximum on-resistance, 3 ohm maximum matching between switches, 4 ohm maximum on-resistance flatness, bidirectional conduction, and operation across positive and negative analog signal ranges. The Analog Devices DG413 datasheet is the controlling reference for control levels, leakage, switching time, and absolute maximum ratings.

工程参考数据: DG413CY+T ——对比、设计指导和合规信息。

选型指南

Choose the DG413CY+T when the design requires four independent 1:1 SPST analog switches in a 16-pin NSOIC package and the exact DG413CY order code is specified. Its published 45 ohm maximum on-resistance, 3 ohm maximum channel matching, and 4 ohm maximum flatness are appropriate for general-purpose analog routing and bidirectional signal paths. The DG413DY+ is the closest same-manufacturer option because it retains the same four-circuit function, package class, and 45 ohm rating; select it when its exact order code and pin documentation meet the production requirements. Consider the Vishay DG413DY-E3 when its 35 ohm maximum on-resistance is beneficial, because it is about 22 percent lower than the DG413CY+T rating. For every alternative, verify terminal-level pin assignments, control polarity, supply limits, leakage, switching time, and operating temperature before treating it as a drop-in replacement.

与替代料对比

参数 本产品 DG413DY+ DG413DY-E3
Brand Analog Devices Analog Devices Vishay Intertechnology
Package 16-SOIC 16-SOIC 16-SOIC
Number of Circuits 4 circuits 4 circuits 4 circuits
Switch Configuration 1:1 SPST 1:1 SPST 1:1 SPST
Maximum On-Resistance 45 ohm 45 ohm 35 ohm

关键差异点

  • Identical four-channel 1:1 SPST architecture (对比 DG413DY+)
  • Lower published maximum on-resistance (对比 DG413DY-E3)
  • Defined channel matching and flatness for the Analog Devices family (对比 DG413DY-E3)

设计说明

Include the 45 ohm maximum on-resistance when calculating attenuation and settling behavior. For a source resistance of 1 kohm, the switch resistance contributes approximately 4.3 percent divider loss before connector, trace, and load effects are included. The 3 ohm maximum channel matching can also produce several millivolts of differential error at higher signal levels, so use matched channels for precision comparisons.

Place the DG413CY+T close to the switched node and keep analog traces short to minimize parasitic resistance, capacitance, and injected noise. Route each signal to the correct switch terminal shown in the manufacturer pin-description table, and maintain adequate clearance between the NSOIC body and surrounding copper. Avoid placing high-current or fast-switching traces beneath sensitive analog pins.

Do not substitute a 16-SOIC device solely because its package dimensions look similar. Confirm the terminal-level pin assignment, control polarity, supply range, absolute maximum ratings, leakage, and switching time in the manufacturer datasheet. The DG413DY-E3 has a 35 ohm maximum on-resistance rating, so even though that value is lower than the DG413CY+T rating, other functional limits must still be reviewed before substitution.

Review the control-pin input currents and supply requirements in the Analog Devices DG413 datasheet before adding digital control levels. Series resistors can limit control-pin transients, but their value should be selected after checking the permitted input voltage and current. Ensure that every control signal remains within the device limits during reset, power sequencing, and connector fault conditions.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The DG413CY+T is a commercial-grade analog switch. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated in the cited product information and therefore remain unknown.

相关搜索

DG413CY+T datasheet DG413CY+T pinout DG413CY+T datasheet pdf Analog Devices DG413CY+T DG413CY+T equivalent DG413CY+T replacement DG413CY+T cross reference DG413CY+T vs DG413DY-E3 DG413CY+T 16-SOIC footprint DG413CY+T 45 ohm analog switch DG413CY+T application circuit DG413CY+T price DG413CY+T stock where to buy DG413CY+T

相关元器件 & 术语

Analog Devices Maxim Integrated DG413CY+T DG413DY+ DG413DY-E3 Vishay Intertechnology quad analog switch SPST switch single-pole single-throw switch analog switch multiplexer interface IC semiconductor on-resistance on-resistance matching on-resistance flatness bidirectional conduction signal routing 16-SOIC NSOIC package surface-mount package industrial control test and measurement sample-and-hold RoHS REACH
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情