Renesas Electronics

DG413DYZ - 35 Ohm Quad SPST Analog Switch | Renesas

料号: DG413DYZ ✓ 量产中
35 ohm maximum Rds(on) 16-pin SOIC Package
最小起订量: 1 |

DG413DYZ 概述

Renesas Electronics DG413DYZ is a monolithic quad SPST CMOS analog switch with four independent, single-pole single-throw channels, a 35 ohm on-resistance, and a 16-pin SOIC package. The switch supports bidirectional signal conduction, TTL-compatible and CMOS-compatible digital control inputs, and switching suitable for analog routing, audio selection, instrumentation, and data-acquisition systems.

An analog switch is an integrated semiconductor device that connects or isolates analog signals under digital control. The DG413 belongs to the analog-switch hierarchy, where an SPST channel provides one signal path that can be opened or closed. Four independent channels permit simultaneous routing of unrelated signals without sharing a common multiplexer node. Bidirectional operation allows each channel to carry a signal in either direction.

The DG413DYZ combines a maximum on-resistance of 35 ohms with a turn-on time of 175 ns. Its four independent SPST switches support TTL and CMOS-compatible control logic, making the device suitable for systems using microcontrollers, FPGA control signals, comparators, or other digital controllers. The compact 16-pin SOIC package supports conventional surface-mount PCB assembly.

Each channel operates independently, allowing control signals to enable or disable individual routes. This architecture is useful when several analog signals must be connected to downstream circuitry without multiplexing them through a shared internal node. Low on-resistance helps limit signal attenuation, while the 175 ns turn-on time supports applications that do not require sub-nanosecond switching performance.

Typical uses include audio signal routing, test and measurement systems, data-acquisition equipment, and general-purpose analog isolation. The device can also serve as a sampling-network element when a controller must connect a selected source to an instrumentation amplifier, ADC input, or measurement front end. Control-logic compatibility simplifies interface design with both 5 V CMOS systems and conventional TTL signals.

For reliable layout, route high-impedance control and analog traces away from fast-switching or high-current paths, and provide a stable ground reference to all package pins. Check the exact logic thresholds, supply requirements, leakage limits, and maximum signal voltage in the Renesas DG411, DG412, and DG413 datasheet before finalizing the schematic and operating limits.

This product page consolidates the manufacturer specifications, verified distributor listings, drop-in comparison options, and practical implementation guidance needed to evaluate the DG413DYZ for a new analog-routing design.

直接替换替代料: DG413DYZ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: DG413DYZ (相同外形与封装尺寸) ——差异在于 Package, Number of Channels, Number of Circuits, Product Type.

Analog Devices
Package: 16-SOIC, 0.154 inch width, 3.90 mm width
Number of Channels: 4
Number of Circuits: 4
对比 DG413DYZ →
Vishay Intertechnology
Package: SOIC-16 (16-SOIC)
Number of Channels: 4 (SPST, normally open)
Product Type: Quad SPST CMOS Analog Switch
对比 DG413DYZ →

DG413DY-E3

✅ 直接替换 ⚠️ 规格未核验
Vishay Intertechnology
📦 16-SOIC
Quad SPST CMOS Analog Switch · 4 (SPST, normally open) · 4 Circuit IC Switch, 1:1 · 35 ohm (typ) · 110 ns (typ) · 15 V · 44 V · 0.35 uW (ultra low)

联系询价

查看数据手册 →

DG413DY+

✅ 直接替换
Analog Devices
📦 16-SOIC
SPST · 4 · 4 · 1:1 · 45 Ω maximum · 3 Ω maximum · 4 Ω maximum · 4.5 V to 30 V

联系询价

查看数据手册 →

DG413DUE+

✅ 直接替换 ⚠️ 规格未核验
📦 16-SOIC
Same Renesas DG413 family and 16-SOIC pin configuration, with ordering-code differences that require datasheet verification

📋 参考替代料(不在目录中)

DG413CUE+

✅ 直接替换
📦 16-SOIC
Cross-reference identifies equivalent performance; manufacturer and ordering code change while the 16-SOIC footprint remains

📋 参考替代料(不在目录中)

DG413CUE+T

✅ 直接替换
📦 16-SOIC
Equivalent DG413-class performance in the same 16-SOIC footprint, with manufacturer and ordering suffix differences

📋 参考替代料(不在目录中)

DG413DYZ 最大额定值与电气特性

Product Type Monolithic quad SPST CMOS analog switch
Number of Circuits 4 circuits
Switch Configuration 1:1 SPST
On-Resistance 35 ohm maximum
Turn-On Time 175 ns
Signal Direction Bidirectional
Digital Input Compatibility TTL and CMOS compatible
封装 16-pin SOIC
安装类型 Surface mount
工作温度范围 -40 C to +85 C

DG413DYZ 16-pin soic 引脚配置指南

DG413DYZ(16-pin soic 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

DG413DYZ 的 16-pin soic 封装引脚图

暂无详细引脚数据: DG413DYZ.

请参阅 数据手册 以查看完整引脚配置。

典型应用

DG413DYZ 适用于 6 应用s: Audio Signal Routing, Data Acquisition Systems, Test and Measurement, Industrial Control Interfaces, Instrumentation Signal Isolation, Low-Frequency Analog Multiplexing.

🎧

Audio Signal Routing

The DG413DYZ can route four audio sources through independent SPST channels without sharing an internal multiplexer node. Its maximum on-resistance of 35 ohms defines the conductive path loss, while the 175 ns turn-on time is more than adequate for ordinary audio source selection. Bidirectional channels also permit the routing topology to support both input selection and output sharing. Use the manufacturer pin-description table to assign the control inputs and analog terminals, and keep the switched audio path away from digital control traces to reduce coupling into the selected signal.

🖥️

Data Acquisition Systems

The four independent switches in the DG413DYZ can connect selected sensor or source lines to a measurement chain. A 35 ohm maximum on-resistance helps preserve signal integrity when the downstream circuit presents a substantially higher input impedance, while the 175 ns turn-on time supports controlled acquisition sequences. Each channel may be enabled separately, allowing unused sources to remain isolated. Place the IC close to the selected input network and provide a quiet ground reference to reduce measurement error and unwanted coupling.

🔧

Test and Measurement

The DG413DYZ is useful in test systems that must connect one of several stimulus or return paths to a common measurement circuit. Its four independent SPST channels reduce the number of discrete routing switches required, and the 35 ohm maximum on-resistance gives engineers a defined path for impedance-sensitive connections. Bidirectional operation supports signal flow in either direction. Account for the switch resistance when calculating source-loading errors, and use short analog traces with a continuous ground plane to maintain predictable measurement behavior.

🏭

Industrial Control Interfaces

The DG413DYZ can route control, feedback, or diagnostic lines in an industrial control board where several low-frequency analog paths must be selected under digital supervision. TTL-compatible and CMOS-compatible inputs simplify connection to industrial logic, and four independently controlled channels allow only the required path to be connected at a given time. The 175 ns turn-on time is well suited to command-level rather than high-frequency switching. Confirm supply voltage and logic-threshold details in the Renesas datasheet before connecting the device to a specific controller family.

📡

Instrumentation Signal Isolation

The DG413DYZ can isolate inactive instrumentation inputs so that a selected source drives a shared amplifier or converter while other channels remain disconnected. Its bidirectional SPST architecture supports flexible routing around the active measurement path, and the specified 35 ohm maximum on-resistance provides a basis for impedance-error analysis. Four channels make it possible to build compact selector networks without multiple single-switch packages. Keep sensitive analog nodes short, maintain uniform ground connections, and review leakage and off-isolation values against the required measurement accuracy.

🔀

Low-Frequency Analog Multiplexing

The DG413DYZ can implement a four-channel low-frequency analog selector by driving each SPST channel from a controller and connecting the relevant terminal to a shared analog node. Its 175 ns turn-on time supports rapid source changes, and its bidirectional channels permit either source-to-node or node-to-source arrangements. Unlike a multiplexer with a common internal structure, the independent switches give the designer direct control over which paths are active. Validate settling behavior, charge injection, and off-state leakage against the precision required by the target system.

推荐产品汇总

DG413DY Related DG413 quad analog switch 用于: Audio Signal Routing, Data Acquisition Systems, Test and Measurement, Industrial Control Interfaces, Low-Frequency Analog Multiplexing DG413DY+ Analog Devices 用于: Audio Signal Routing, Instrumentation Signal Isolation DG413CUE+ Functional cross-reference candidate 用于: Data Acquisition Systems, Test and Measurement DG413DUE+ Same-family ordering-code variant 用于: Industrial Control Interfaces, Low-Frequency Analog Multiplexing DG413CUE+T Functional equivalent in the same package 用于: Instrumentation Signal Isolation
What is the DG413DYZ?
The DG413DYZ is a Renesas Electronics monolithic quad SPST CMOS analog switch with four independent channels, a maximum on-resistance of 35 ohms, and a 175 ns turn-on time. According to the Renesas DG411, DG412, and DG413 datasheet, the device provides bidirectional channels and TTL- and CMOS-compatible digital inputs. It is packaged in a 16-pin SOIC for surface-mount assembly.
How many analog switches are built into the DG413DYZ?
The DG413DYZ contains four independent single-pole, single-throw analog switches. Each channel has its own control input and can connect or isolate one analog signal path. According to the Renesas DG411, DG412, and DG413 datasheet, the independent architecture allows several signals to be routed simultaneously without sharing a common multiplexer node.
What is the on-resistance and switching time of DG413DYZ?
The DG413DYZ has a maximum analog on-resistance of 35 ohms and a turn-on time of 175 ns. According to the Renesas DG413 product page, the lower on-resistance and faster switching behavior distinguish it from the older DG211 and DG212 families. These characteristics make it appropriate for precision signal routing, audio paths, and measurement systems.
Is the DG413DYZ signal path bidirectional?
Yes, every DG413DYZ channel supports bidirectional signal conduction. The switch can therefore pass an analog signal toward a load or route it back toward its source. The Renesas DG411, DG412, and DG413 datasheet identifies the DG413 family as monolithic CMOS analog switches with independent SPST channels suitable for two-way routing.
Where can I download the DG413DYZ datasheet PDF?
The official Renesas DG411, DG412, and DG413 datasheet is available from the Renesas document page linked in the datasheet field on this page. It contains the authoritative pin description, recommended operating conditions, electrical characteristics, logic levels, and ordering information. Use that document when assigning PCB pins and checking limits for the exact DG413DYZ ordering code.
Where can I find the DG413DYZ pinout?
The DG413DYZ pin description and 16-pin SOIC pinout are contained in the pin-configuration section of the Renesas DG411, DG412, and DG413 datasheet. Use that table when assigning each of the four control inputs, four analog terminals, supply pins, and ground pins. The complete graphical pinout is not duplicated here because a verified manufacturer pin table was not included in the product listing.
What is the difference between DG413DYZ and DG413DY?
The DG413DYZ and DG413DY belong to the same DG413 quad SPST switch family and share the core 35 ohm on-resistance and 175 ns turn-on-time positioning. Their ordering suffixes can differ in package or environmental coding, so the exact suffix must be checked against the manufacturer ordering table. Both are associated with the 16-pin SOIC configuration shown in the component listings.
Can DG413CUE+ replace DG413DYZ?
The DG413CUE+ is identified by cross-reference information as functionally equivalent to the DG413DYZ and is presented as a functional alternative in the same 16-pin SOIC class. The Renesas DG413DYZ remains the preferred choice where direct continuation of the original manufacturer family and documentation is required. Confirm pin assignment and absolute maximum ratings in the specific replacement datasheet before production use.
When should I choose DG413DYZ instead of DG413CUE+?
Choose the DG413DYZ when maintaining the established Renesas DG413 documentation, qualification, and supply-chain continuity is more important than evaluating a second-source device. The DG413CUE+ is a functional alternative for designs that can be reviewed against its own 16-pin SOIC datasheet. The decision should consider verified electrical limits rather than assuming every cross-reference match is unconditional.
Is DG413DYZ suitable for audio signal routing?
Yes, the DG413DYZ is suitable for routing audio signals through four independent bidirectional SPST channels. Its 35 ohm maximum on-resistance provides a defined signal-path resistance, while the 175 ns turn-on time is ample for typical audio source-selection paths. The Renesas DG413 documentation identifies audio routing as a practical application for this analog-switch family.
What are the key specifications of DG413DYZ that engineers should know?
The key DG413DYZ specifications are four independent SPST channels, 35 ohm maximum on-resistance, 175 ns turn-on time, bidirectional operation, TTL- and CMOS-compatible control, and a 16-pin SOIC package. According to the Renesas DG411, DG412, and DG413 datasheet, these characteristics position the device for general-purpose analog routing where four individually controlled connections are required.
Where can I buy DG413DYZ online?
Use the Request a Quote form on this page to request DG413DYZ availability, current commercial terms, and the quantity needed for your build. The form is the appropriate route for a quote because component pricing and stock can change with order quantity and market conditions. Provide the exact 16-pin SOIC ordering code to avoid package ambiguity.
What is the price of DG413DYZ?
The current commercial price for DG413DYZ should be requested through the Request a Quote form on this page. The form can account for the exact quantity, delivery requirements, and purchasing schedule rather than presenting a static figure that may no longer reflect market conditions. Specify whether the order is prototype, production, or scheduled repeat stock.
What is the lead time and stock status for DG413DYZ?
Request current DG413DYZ stock status, lead time, and minimum-order requirements through the Request a Quote form on this page. The component listing identifies the part as available from distribution channels, but live inventory and scheduling should be confirmed for the quantity being purchased. Include your target delivery date and packaging requirement in the request.
Is DG413DYZ compliant with RoHS and REACH?
The RoHS and REACH status of the exact DG413DYZ ordering code should be confirmed from the current manufacturer declaration or product documentation before release. The listing for the closely identified DG413DYZ-T package form indicates RoHS compliance, while its REACH field is not stated. Use the Request a Quote form to request the current compliance documentation for the exact orderable part.

工程参考数据: DG413DYZ ——对比、设计指导和合规信息。

选型指南

Choose the DG413DYZ when the design requires four independently controlled, bidirectional SPST channels in a 16-pin SOIC and you want to remain within the established Renesas DG413 family. It is particularly suitable for audio routing, data-acquisition paths, instrumentation, and industrial control interfaces where the 35 ohm maximum on-resistance and 175 ns turn-on time meet the system requirements. Select DG413DY or DG413DY+ when the original ordering code is unavailable but the corresponding Renesas suffix and documentation are acceptable. DG413DUE+ is a reasonable same-family option when its exact ordering-code characteristics are confirmed. Consider DG413CUE+ or DG413CUE+T when a second-source strategy outweighs the benefit of Renesas documentation continuity. Before substituting any option, compare pin functions, logic thresholds, leakage, charge injection, absolute maximum voltages, and package drawings rather than relying on the shared package name alone.

与替代料对比

参数 本产品 DG413DY DG413DY+ DG413DUE+ DG413CUE+ DG413CUE+T
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Analog Devices Analog Devices
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Number of Circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits

关键差异点

  • Four independently controlled channels (对比 DG413CUE+)
  • Defined low on-resistance (对比 DG413CUE+)
  • Fast enough for control-level analog routing (对比 DG413CUE+T)
  • Bidirectional SPST architecture (对比 DG413DY+)

设计说明

Treat the DG413DYZ as a 35 ohm maximum series resistance in the selected analog path. Calculate its attenuation against the source impedance and receiving-device input impedance, and add the switch resistance to any existing divider or protection network. For high-impedance sensing paths, verify off-isolation, leakage, and charge injection against the required accuracy. Use short traces, a continuous ground plane, and a nearby ground-return connection to minimize induced pickup.

Place the analog terminals and their external routing network close to the associated switch pins, while keeping the four digital control inputs away from sensitive analog traces. Route each control signal with a ground reference where practical and avoid sharing narrow return paths with high-current circuitry. Bidirectional channels can couple switching transients into either direction, so control the edge rate externally when an attached circuit cannot tolerate a fast transition.

Do not infer that every DG413 ordering suffix is interchangeable without checking the manufacturer ordering table, logic thresholds, temperature grade, and package drawing. The DG413DYZ is a 16-SOIC device, and the cross-reference candidates use the same package class, but cross-brand qualification still requires review of pin names, absolute maximum signal voltage, leakage, charge injection, and supply conditions. Verify the exact part marking during incoming inspection.

Confirm the permitted supply-voltage range and control-pin states in the Renesas DG411, DG412, and DG413 datasheet before connecting the device to a system rail. The listed specifications identify TTL- and CMOS-compatible digital inputs, but they do not by themselves establish every allowed combination of supply voltage, control voltage, and analog signal voltage. Ensure all control signals remain within their specified limits even during power-up, reset, and fault conditions.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The product listing for the closely identified DG413DYZ-T package form states RoHS compliance but does not state REACH status. Exact compliance documentation for DG413DYZ should be confirmed before production release. AEC-Q100 is not applicable because this is an industrial analog interface IC rather than an automotive-qualified device.

相关搜索

DG413DYZ datasheet DG413DYZ pinout DG413DYZ datasheet pdf DG413DYZ equivalent DG413DYZ replacement DG413DYZ cross reference DG413DYZ vs DG413CUE+ DG413DYZ footprint DG413DYZ price DG413DYZ stock Renesas DG413DYZ DG413DYZ 35 ohm switch DG413DYZ 16-SOIC pinout DG413DYZ audio switching

相关元器件 & 术语

Renesas Electronics DG413DYZ DG413DY DG413DY+ DG413DUE+ DG413CUE+ DG413CUE+T Analog Devices quad SPST analog switch CMOS analog switch SPST switch bidirectional switch analog switch interface IC semiconductor on-resistance turn-on time charge injection off-isolation TTL-compatible input CMOS-compatible input 16-SOIC SOIC family surface mount data acquisition audio signal routing instrumentation
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情