DG413DYZ - 35 Ohm Quad SPST Analog Switch | Renesas
Teilenummer: DG413DYZ ✓ AktivDG413DYZ Übersicht
An analog switch is an integrated semiconductor device that connects or isolates analog signals under digital control. The DG413 belongs to the analog-switch hierarchy, where an SPST channel provides one signal path that can be opened or closed. Four independent channels permit simultaneous routing of unrelated signals without sharing a common multiplexer node. Bidirectional operation allows each channel to carry a signal in either direction.
The DG413DYZ combines a maximum on-resistance of 35 ohms with a turn-on time of 175 ns. Its four independent SPST switches support TTL and CMOS-compatible control logic, making the device suitable for systems using microcontrollers, FPGA control signals, comparators, or other digital controllers. The compact 16-pin SOIC package supports conventional surface-mount PCB assembly.
Each channel operates independently, allowing control signals to enable or disable individual routes. This architecture is useful when several analog signals must be connected to downstream circuitry without multiplexing them through a shared internal node. Low on-resistance helps limit signal attenuation, while the 175 ns turn-on time supports applications that do not require sub-nanosecond switching performance.
Typical uses include audio signal routing, test and measurement systems, data-acquisition equipment, and general-purpose analog isolation. The device can also serve as a sampling-network element when a controller must connect a selected source to an instrumentation amplifier, ADC input, or measurement front end. Control-logic compatibility simplifies interface design with both 5 V CMOS systems and conventional TTL signals.
For reliable layout, route high-impedance control and analog traces away from fast-switching or high-current paths, and provide a stable ground reference to all package pins. Check the exact logic thresholds, supply requirements, leakage limits, and maximum signal voltage in the Renesas DG411, DG412, and DG413 datasheet before finalizing the schematic and operating limits.
This product page consolidates the manufacturer specifications, verified distributor listings, drop-in comparison options, and practical implementation guidance needed to evaluate the DG413DYZ for a new analog-routing design.
Drop-in-Alternativen für DG413DYZ – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit DG413DYZ (gleiche Bauform und Footprint) – abweichend in Package, Number of Channels, Number of Circuits, Product Type.
DG413DY-E3
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →DG413DY+
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →DG413DUE+
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
DG413CUE+
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
DG413CUE+T
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
DG413DYZ Grenzwerte & elektrische Eigenschaften
| Product Type | Monolithic quad SPST CMOS analog switch |
| Number of Circuits | 4 circuits |
| Switch Configuration | 1:1 SPST |
| On-Resistance | 35 ohm maximum |
| Turn-On Time | 175 ns |
| Signal Direction | Bidirectional |
| Digital Input Compatibility | TTL and CMOS compatible |
| Gehäuse | 16-pin SOIC |
| Montageart | Surface mount |
| Betriebstemperaturbereich | -40 C to +85 C |
DG413DYZ 16-pin soic Pinbelegungsleitfaden
Pinbelegung für DG413DYZ (16-pin soic-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für DG413DYZ.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
DG413DYZ ist geeignet für 6 Anwendungs: Audio Signal Routing, Data Acquisition Systems, Test and Measurement, Industrial Control Interfaces, Instrumentation Signal Isolation, Low-Frequency Analog Multiplexing.
Audio Signal Routing
The DG413DYZ can route four audio sources through independent SPST channels without sharing an internal multiplexer node. Its maximum on-resistance of 35 ohms defines the conductive path loss, while the 175 ns turn-on time is more than adequate for ordinary audio source selection. Bidirectional channels also permit the routing topology to support both input selection and output sharing. Use the manufacturer pin-description table to assign the control inputs and analog terminals, and keep the switched audio path away from digital control traces to reduce coupling into the selected signal.
Empfohlen
Data Acquisition Systems
The four independent switches in the DG413DYZ can connect selected sensor or source lines to a measurement chain. A 35 ohm maximum on-resistance helps preserve signal integrity when the downstream circuit presents a substantially higher input impedance, while the 175 ns turn-on time supports controlled acquisition sequences. Each channel may be enabled separately, allowing unused sources to remain isolated. Place the IC close to the selected input network and provide a quiet ground reference to reduce measurement error and unwanted coupling.
Empfohlen
Test and Measurement
The DG413DYZ is useful in test systems that must connect one of several stimulus or return paths to a common measurement circuit. Its four independent SPST channels reduce the number of discrete routing switches required, and the 35 ohm maximum on-resistance gives engineers a defined path for impedance-sensitive connections. Bidirectional operation supports signal flow in either direction. Account for the switch resistance when calculating source-loading errors, and use short analog traces with a continuous ground plane to maintain predictable measurement behavior.
Empfohlen
Industrial Control Interfaces
The DG413DYZ can route control, feedback, or diagnostic lines in an industrial control board where several low-frequency analog paths must be selected under digital supervision. TTL-compatible and CMOS-compatible inputs simplify connection to industrial logic, and four independently controlled channels allow only the required path to be connected at a given time. The 175 ns turn-on time is well suited to command-level rather than high-frequency switching. Confirm supply voltage and logic-threshold details in the Renesas datasheet before connecting the device to a specific controller family.
Empfohlen
Instrumentation Signal Isolation
The DG413DYZ can isolate inactive instrumentation inputs so that a selected source drives a shared amplifier or converter while other channels remain disconnected. Its bidirectional SPST architecture supports flexible routing around the active measurement path, and the specified 35 ohm maximum on-resistance provides a basis for impedance-error analysis. Four channels make it possible to build compact selector networks without multiple single-switch packages. Keep sensitive analog nodes short, maintain uniform ground connections, and review leakage and off-isolation values against the required measurement accuracy.
Empfohlen
Low-Frequency Analog Multiplexing
The DG413DYZ can implement a four-channel low-frequency analog selector by driving each SPST channel from a controller and connecting the relevant terminal to a shared analog node. Its 175 ns turn-on time supports rapid source changes, and its bidirectional channels permit either source-to-node or node-to-source arrangements. Unlike a multiplexer with a common internal structure, the independent switches give the designer direct control over which paths are active. Validate settling behavior, charge injection, and off-state leakage against the precision required by the target system.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für DG413DYZ – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | DG413DY | DG413DY+ | DG413DUE+ | DG413CUE+ | DG413CUE+T |
|---|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Analog Devices | Analog Devices |
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Number of Circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits |
Wichtigste Unterscheidungsmerkmale
- Four independently controlled channels (vs. DG413CUE+)
- Defined low on-resistance (vs. DG413CUE+)
- Fast enough for control-level analog routing (vs. DG413CUE+T)
- Bidirectional SPST architecture (vs. DG413DY+)
Designhinweise
Treat the DG413DYZ as a 35 ohm maximum series resistance in the selected analog path. Calculate its attenuation against the source impedance and receiving-device input impedance, and add the switch resistance to any existing divider or protection network. For high-impedance sensing paths, verify off-isolation, leakage, and charge injection against the required accuracy. Use short traces, a continuous ground plane, and a nearby ground-return connection to minimize induced pickup.
Place the analog terminals and their external routing network close to the associated switch pins, while keeping the four digital control inputs away from sensitive analog traces. Route each control signal with a ground reference where practical and avoid sharing narrow return paths with high-current circuitry. Bidirectional channels can couple switching transients into either direction, so control the edge rate externally when an attached circuit cannot tolerate a fast transition.
Do not infer that every DG413 ordering suffix is interchangeable without checking the manufacturer ordering table, logic thresholds, temperature grade, and package drawing. The DG413DYZ is a 16-SOIC device, and the cross-reference candidates use the same package class, but cross-brand qualification still requires review of pin names, absolute maximum signal voltage, leakage, charge injection, and supply conditions. Verify the exact part marking during incoming inspection.
Confirm the permitted supply-voltage range and control-pin states in the Renesas DG411, DG412, and DG413 datasheet before connecting the device to a system rail. The listed specifications identify TTL- and CMOS-compatible digital inputs, but they do not by themselves establish every allowed combination of supply voltage, control voltage, and analog signal voltage. Ensure all control signals remain within their specified limits even during power-up, reset, and fault conditions.
Compliance-Informationen
The product listing for the closely identified DG413DYZ-T package form states RoHS compliance but does not state REACH status. Exact compliance documentation for DG413DYZ should be confirmed before production release. AEC-Q100 is not applicable because this is an industrial analog interface IC rather than an automotive-qualified device.