DS90C032WLQMLV - Quad LVDS Receiver, 155.5 Mbps | TI
料号: DS90C032WLQMLV ✓ 量产中DS90C032WLQMLV 概述
An LVDS receiver is an interface IC that converts a low-voltage differential signal into a complementary CMOS logic output. Low Voltage Differential Signaling belongs to the broader differential-signal interface family and uses the voltage difference between two conductors as the signal. DS90C032 integrates four independent receiver channels to reduce board area, component count, and interface overhead in systems requiring multiple high-speed links.
The receiver features high-impedance LVDS inputs, low differential skew, and low chip-to-chip skew. It accepts differential signal levels as small as 330 mV and is compatible with the IEEE 1596.3 SCI LVDS standard. These characteristics make the device suitable for demanding point-to-point links where signal integrity, timing consistency, and reliable recovery at high data rates are important. Single-event-latchup immunity is specifically identified for the space-qualified DS90C032QML-SP family variant.
Each receiver channel converts its differential input into two complementary CMOS outputs, allowing the receiving system to evaluate the data relationship with reduced common-mode sensitivity. The device is also described as pin compatible with the DS26C32A interface family. Its low power dissipation makes it advantageous in multi-channel industrial, scientific, telecommunications, and aerospace systems where maintaining clean logic thresholds without adding substantial thermal load is important.
Typical applications include high-speed instrumentation links, industrial control and data-acquisition systems, scientific equipment, telecommunications backplanes, space and defense electronics, and embedded systems that transfer parallel or parallelized data over compact differential interconnects. The four-channel architecture can also serve as a front end for clock distribution, remote sensing, and test-equipment communication when a source produces compatible LVDS signals.
PCB implementation should preserve the paired nature of each differential route and provide a continuous reference plane beneath the receiver. Maintain matched trace lengths within each differential pair, avoid introducing excessive stubs, and route the four channels away from high-slew-rate switching nodes. The ceramic flatpack is intended for demanding environmental conditions, so assembly and inspection processes must accommodate its terminal form and thermal expansion behavior.
This product page combines the manufacturer’s operating characteristics with practical interface-design guidance, package information, sourcing fields, and documented drop-in alternatives. It is intended to help engineers evaluate LVDS signal integrity, differential routing, temperature range, and replacement compatibility before integrating the receiver into a high-speed electronic system.
直接替换替代料: DS90C032WLQMLV ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
DS90C032QML
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
DS90C032QMLV
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
DS90C032W-QMLV
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
DS90C032QML-SP
✅ 直接替换📋 参考替代料(不在目录中)
DS90C032WLQMLV 规格参数
| Receiver Type | Quad LVDS differential line receiver |
| Number of Channels | 4 channels |
| Maximum Data Rate | Greater than 155.5 Mbps |
| Maximum Data Frequency | 77.7 MHz |
| Logic Technology | CMOS |
| Input Signal Standard | Low Voltage Differential Signaling (LVDS) |
| Minimum Accepted Differential Signal Level | 330 mV |
| Input Impedance | High impedance |
| Output Format | Differential CMOS |
| 工作温度范围 | -55°C to +125°C |
| Temperature Grade | Military |
| Package Type | 16-CFP ceramic flatpack |
| Number of Terminals | 16 terminals |
| Terminal Form | Flat |
| Package Shape | Rectangular |
| Power Dissipation | Low-power dissipation |
| Single-Event Latchup | Immune in the DS90C032QML-SP variant |
| IEEE Standard Compatibility | Compatible with IEEE 1596.3 SCI LVDS |
| DS26C32A Pin Compatibility | Pin compatible |
DS90C032WLQMLV rectangular 引脚配置指南
DS90C032WLQMLV(rectangular 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: DS90C032WLQMLV.
请参阅 数据手册 以查看完整引脚配置。
典型应用
DS90C032WLQMLV 适用于 6 应用s: Scientific Instrumentation Links, Industrial Data Acquisition, Telecommunications Backplanes, Aerospace and Defense Electronics, Test and Measurement Systems, Embedded High-Speed Control Links.
Scientific Instrumentation Links
The DS90C032WLQMLV suits multi-channel scientific instrumentation that transfers data between modules over LVDS links. Four integrated receiver channels support more data paths without requiring four separate receiver packages, while operation above 155.5 Mbps provides ample margin for high-rate conversion or control traffic. The -55°C to +125°C operating range is useful in temperature-controlled chambers and industrial test environments. Designers should preserve closely matched differential traces, provide a continuous reference plane, and validate source timing against the receiver’s complementary CMOS outputs.
推荐
Industrial Data Acquisition
The DS90C032WLQMLV is appropriate for industrial data-acquisition systems requiring several low-power differential communication links. Its four LVDS receivers can recover control, status, and measurement-related data from remote modules, while the receiver’s high-impedance inputs help limit source loading. Data rates above 155.5 Mbps support modern parallel-to-serial transport architectures and link redundancy. Keep each positive and negative trace pair tightly coupled, match intra-pair geometry, and isolate the links from motors, contactors, and other high-energy switching sources.
推荐
Telecommunications Backplanes
The DS90C032WLQMLV can serve as a receive front end in telecommunications equipment where several compact differential links terminate onto CMOS logic. Its four-channel organization reduces component count, while low power dissipation benefits space-constrained line cards and edge systems. The 155.5 Mbps data-rate capability supports legacy parallel buses, control-plane links, and serialized instrumentation channels. Board routing must include return-path continuity, suitable layer transitions, and controlled impedance so reflections do not reduce the 330 mV differential signal margin.
推荐
Aerospace and Defense Electronics
The DS90C032WLQMLV fits aerospace and defense electronics requiring a high-speed receiver in a military-temperature 16-CFP package. Its -55°C to +125°C range and low power dissipation support compact, environmentally demanding subsystems, while four channels simplify multi-link termination. For programs requiring space qualification or single-event-latchup immunity, evaluate DS90C032QML-SP instead of assuming equivalent qualification. Regardless of variant, complete radiation, environmental, and system-specific qualification remains the responsibility of the applicable aerospace program.
推荐
Test and Measurement Systems
The DS90C032WLQMLV is useful in test and measurement equipment that needs multiple reliable LVDS data paths between instrument modules. The four receivers can reduce interface-component count, and the high maximum data rate accommodates high-speed digitized measurement streams or control links. Its extended temperature range supports equipment intended for industrial or environmental test conditions. Place the receiver close to the cable or PCB interface, maintain symmetrical routing, and include receiver-side testing points so differential input quality can be checked without disrupting the source link.
推荐
Embedded High-Speed Control Links
The DS90C032WLQMLV can provide a compact interface between embedded processors or controllers and remote high-speed subsystems using LVDS. Four channels can carry parallelized control, status, or synchronization traffic, and the >155.5 Mbps capability supports demanding serial-to-parallel architectures. Because the outputs are CMOS, downstream devices must use compatible voltage levels and account for receiver propagation and skew. Keep clock and data pairs isolated from each other where required, and use source termination and receiver placement determined by the complete interconnect model.
推荐
推荐产品汇总
工程参考数据: DS90C032WLQMLV ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | DS90C032QML | DS90C032QMLV | DS90C032W-QMLV | DS90C032QML-SP |
|---|---|---|---|---|---|
| Package | 16-CFP ceramic flatpack | 16-CFP | 16-CFP | 16-CFP | 16-CFP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Receiver Type | Quad LVDS differential line receiver | Quad LVDS differential line receiver | Quad LVDS differential line receiver | Quad LVDS differential line receiver | Quad LVDS differential line receiver |
关键差异点
- Four LVDS channels in one military-temperature receiver (对比 DS90C032QML)
- Space-qualified option with stated latchup immunity (对比 DS90C032QML-SP)
- High-speed operation in a compact integrated receiver (对比 DS26C32A)
设计说明
Route every LVDS pair as a tightly coupled differential pair on a continuous reference plane. Keep the positive and negative traces geometrically symmetric through vias, connectors, and transitions, and do not change one conductor’s reference geometry without changing the other. Avoid stubs and test-probe branches that create reflections. A four-channel receiver can amplify routing asymmetry effects because skew between the two conductors of any pair can affect timing margin and recovered-data integrity.
Validate the complete source-to-receiver link rather than treating the 330 mV differential sensitivity as the only design criterion. Confirm source amplitude, common-mode voltage, edge rate, trace loss, connector behavior, and receiver placement at the actual data rate. Use the DS90C032 manufacturer datasheet for input thresholds and timing limits, then simulate or measure the finished interconnect to ensure differential voltage and eye margin remain acceptable across process, temperature, and cable variations.
Estimated: the receiver’s numerical supply voltage, supply current, and thermal resistance are not established here, so a numerical junction-temperature result would not be defensible. During design release, calculate dissipation from the actual supply voltage and measured channel current, then apply the package thermal information from the manufacturer datasheet. Keep the 16-CFP thermally connected as intended and evaluate the ceramic package’s temperature-dependent dimensions so mechanical stress does not damage soldered interconnects during environmental cycling.
合规信息
The manufacturer identifies IEEE 1596.3 SCI LVDS compatibility for the DS90C032 family. RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 status are not established for the exact DS90C032WLQMLV ordering option.