Texas Instruments

DS90C032WLQMLV - Quad LVDS Receiver, 155.5 Mbps | TI

MPN: DS90C032WLQMLV ✓ Hoạt động
16-CFP ceramic flatpack Package 77.7 MHz Speed
MOQ: 1 |

DS90C032WLQMLV Tóm tắt

The Texas Instruments DS90C032WLQMLV is a four-channel LVDS differential line receiver designed for high-speed data transmission with very low power dissipation. It supports data rates in excess of 155.5 Mbps at 77.7 MHz, accepts small-swing differential signals, and operates across a military temperature range of -55°C to +125°C. The device is supplied in a 16-pin ceramic flatpack package designated 16-CFP.

An LVDS receiver is an interface IC that converts a low-voltage differential signal into a complementary CMOS logic output. Low Voltage Differential Signaling belongs to the broader differential-signal interface family and uses the voltage difference between two conductors as the signal. DS90C032 integrates four independent receiver channels to reduce board area, component count, and interface overhead in systems requiring multiple high-speed links.

The receiver features high-impedance LVDS inputs, low differential skew, and low chip-to-chip skew. It accepts differential signal levels as small as 330 mV and is compatible with the IEEE 1596.3 SCI LVDS standard. These characteristics make the device suitable for demanding point-to-point links where signal integrity, timing consistency, and reliable recovery at high data rates are important. Single-event-latchup immunity is specifically identified for the space-qualified DS90C032QML-SP family variant.

Each receiver channel converts its differential input into two complementary CMOS outputs, allowing the receiving system to evaluate the data relationship with reduced common-mode sensitivity. The device is also described as pin compatible with the DS26C32A interface family. Its low power dissipation makes it advantageous in multi-channel industrial, scientific, telecommunications, and aerospace systems where maintaining clean logic thresholds without adding substantial thermal load is important.

Typical applications include high-speed instrumentation links, industrial control and data-acquisition systems, scientific equipment, telecommunications backplanes, space and defense electronics, and embedded systems that transfer parallel or parallelized data over compact differential interconnects. The four-channel architecture can also serve as a front end for clock distribution, remote sensing, and test-equipment communication when a source produces compatible LVDS signals.

PCB implementation should preserve the paired nature of each differential route and provide a continuous reference plane beneath the receiver. Maintain matched trace lengths within each differential pair, avoid introducing excessive stubs, and route the four channels away from high-slew-rate switching nodes. The ceramic flatpack is intended for demanding environmental conditions, so assembly and inspection processes must accommodate its terminal form and thermal expansion behavior.

This product page combines the manufacturer’s operating characteristics with practical interface-design guidance, package information, sourcing fields, and documented drop-in alternatives. It is intended to help engineers evaluate LVDS signal integrity, differential routing, temperature range, and replacement compatibility before integrating the receiver into a high-speed electronic system.

Bộ thay thế dễ dàng lắp đặt cho DS90C032WLQMLV — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

DS90C032QML

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 16-CFP
Same four-channel LVDS receiver family and 16-CFP architecture; temperature-grade and qualification suffix differ from the WL military-grade ordering code.

📋 Tham chiếu thay thế (không có trong danh mục)

DS90C032QMLV

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 16-CFP
Same DS90C032 receiver architecture and 16-CFP format; ordering qualification and temperature-grade suffix differ from WLQMLV.

📋 Tham chiếu thay thế (không có trong danh mục)

DS90C032W-QMLV

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 16-CFP
Same DS90C032 quad LVDS receiver family and 16-CFP architecture; W ordering suffix indicates a distinct qualification configuration.

📋 Tham chiếu thay thế (không có trong danh mục)

DS90C032QML-SP

✅ Drop-In
📦 16-CFP
Same quad LVDS receiver architecture and 16-CFP format, with space qualification and stated single-event-latchup immunity; qualification grade differs.

📋 Tham chiếu thay thế (không có trong danh mục)

DS90C032WLQMLV Thông số kỹ thuật

Receiver Type Quad LVDS differential line receiver
Number of Channels 4 channels
Maximum Data Rate Greater than 155.5 Mbps
Maximum Data Frequency 77.7 MHz
Logic Technology CMOS
Input Signal Standard Low Voltage Differential Signaling (LVDS)
Minimum Accepted Differential Signal Level 330 mV
Input Impedance High impedance
Output Format Differential CMOS
Khoảng nhiệt độ hoạt động -55°C to +125°C
Temperature Grade Military
Package Type 16-CFP ceramic flatpack
Number of Terminals 16 terminals
Terminal Form Flat
Package Shape Rectangular
Power Dissipation Low-power dissipation
Single-Event Latchup Immune in the DS90C032QML-SP variant
IEEE Standard Compatibility Compatible with IEEE 1596.3 SCI LVDS
DS26C32A Pin Compatibility Pin compatible

Hướng dẫn cấu hình chân DS90C032WLQMLV rectangular

Cấu hình chân cho DS90C032WLQMLV (rectangular gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân rectangular cho DS90C032WLQMLV

Không có dữ liệu chân cụ thể sẵn có cho DS90C032WLQMLV.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

DS90C032WLQMLV phù hợp cho 6 Áp dụngs: Scientific Instrumentation Links, Industrial Data Acquisition, Telecommunications Backplanes, Aerospace and Defense Electronics, Test and Measurement Systems, Embedded High-Speed Control Links.

🖥️

Scientific Instrumentation Links

The DS90C032WLQMLV suits multi-channel scientific instrumentation that transfers data between modules over LVDS links. Four integrated receiver channels support more data paths without requiring four separate receiver packages, while operation above 155.5 Mbps provides ample margin for high-rate conversion or control traffic. The -55°C to +125°C operating range is useful in temperature-controlled chambers and industrial test environments. Designers should preserve closely matched differential traces, provide a continuous reference plane, and validate source timing against the receiver’s complementary CMOS outputs.

🏭

Industrial Data Acquisition

The DS90C032WLQMLV is appropriate for industrial data-acquisition systems requiring several low-power differential communication links. Its four LVDS receivers can recover control, status, and measurement-related data from remote modules, while the receiver’s high-impedance inputs help limit source loading. Data rates above 155.5 Mbps support modern parallel-to-serial transport architectures and link redundancy. Keep each positive and negative trace pair tightly coupled, match intra-pair geometry, and isolate the links from motors, contactors, and other high-energy switching sources.

🌐

Telecommunications Backplanes

The DS90C032WLQMLV can serve as a receive front end in telecommunications equipment where several compact differential links terminate onto CMOS logic. Its four-channel organization reduces component count, while low power dissipation benefits space-constrained line cards and edge systems. The 155.5 Mbps data-rate capability supports legacy parallel buses, control-plane links, and serialized instrumentation channels. Board routing must include return-path continuity, suitable layer transitions, and controlled impedance so reflections do not reduce the 330 mV differential signal margin.

✈️

Aerospace and Defense Electronics

The DS90C032WLQMLV fits aerospace and defense electronics requiring a high-speed receiver in a military-temperature 16-CFP package. Its -55°C to +125°C range and low power dissipation support compact, environmentally demanding subsystems, while four channels simplify multi-link termination. For programs requiring space qualification or single-event-latchup immunity, evaluate DS90C032QML-SP instead of assuming equivalent qualification. Regardless of variant, complete radiation, environmental, and system-specific qualification remains the responsibility of the applicable aerospace program.

🔧

Test and Measurement Systems

The DS90C032WLQMLV is useful in test and measurement equipment that needs multiple reliable LVDS data paths between instrument modules. The four receivers can reduce interface-component count, and the high maximum data rate accommodates high-speed digitized measurement streams or control links. Its extended temperature range supports equipment intended for industrial or environmental test conditions. Place the receiver close to the cable or PCB interface, maintain symmetrical routing, and include receiver-side testing points so differential input quality can be checked without disrupting the source link.

🧩

Embedded High-Speed Control Links

The DS90C032WLQMLV can provide a compact interface between embedded processors or controllers and remote high-speed subsystems using LVDS. Four channels can carry parallelized control, status, or synchronization traffic, and the >155.5 Mbps capability supports demanding serial-to-parallel architectures. Because the outputs are CMOS, downstream devices must use compatible voltage levels and account for receiver propagation and skew. Keep clock and data pairs isolated from each other where required, and use source termination and receiver placement determined by the complete interconnect model.

Tóm tắt các sản phẩm được đề xuất

DS90C032QML Same-family quad LVDS receiver Được sử dụng trong: Scientific Instrumentation Links, Telecommunications Backplanes, Aerospace and Defense Electronics, Embedded High-Speed Control Links DS26C32A Manufacturer-identified pin-compatible interface family Được sử dụng trong: Scientific Instrumentation Links, Industrial Data Acquisition, Test and Measurement Systems DS90C032QML-SP Space-qualified same-family receiver option Được sử dụng trong: Industrial Data Acquisition, Aerospace and Defense Electronics DS90C032W-QMLV Alternate same-family ordering configuration Được sử dụng trong: Telecommunications Backplanes, Embedded High-Speed Control Links DS90C032QMLV Same-family receiver option Được sử dụng trong: Test and Measurement Systems
What is the DS90C032WLQMLV?
The DS90C032WLQMLV is a four-channel LVDS differential line receiver that converts low-voltage differential inputs into CMOS logic signals. According to the manufacturer datasheet, it supports data rates in excess of 155.5 Mbps at 77.7 MHz while emphasizing low power dissipation, high-impedance inputs, and low differential skew for high-speed interface designs.
What data rate does DS90C032WLQMLV support?
The DS90C032WLQMLV supports data rates in excess of 155.5 Mbps, corresponding to a signaling frequency of 77.7 MHz. The manufacturer datasheet identifies the device as a quad CMOS differential line receiver designed for high-speed applications. This rate capability makes it appropriate for point-to-point LVDS links in instrumentation, telecommunications, and industrial control systems.
What operating temperature range does DS90C032WLQMLV support?
The DS90C032WLQMLV operates from -55°C to +125°C and is identified as a military-temperature-grade receiver. According to the manufacturer datasheet, its low power dissipation and four-channel LVDS architecture are intended for demanding systems. The ceramic flatpack construction and extended temperature range distinguish this ordering option from standard commercial-temperature variants.
Where can I download the DS90C032WLQMLV datasheet PDF?
The DS90C032WLQMLV datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/ds90c032.pdf. The manufacturer datasheet is the primary document for the pin description, electrical characteristics, LVDS input thresholds, CMOS output behavior, package information, and application guidance. The DS90C032 product page provides ordering and quality information as well.
Where is the DS90C032WLQMLV pinout located?
The DS90C032WLQMLV pinout is documented in the pin-configuration and pin-description tables of the Texas Instruments DS90C032 manufacturer datasheet. The package is a 16-terminal CFP rather than one of the common leaded or QFN packages, so its terminal numbering should be transcribed directly from that diagram. Use the datasheet numbering when assigning PCB lands and checking input-output orientation.
Can DS90C032WLQMLV accept a 330 mV LVDS signal?
Yes, the DS90C032WLQMLV accepts differential LVDS signal levels as small as 330 mV. According to the manufacturer datasheet, its high-impedance inputs are designed to recover data while limiting loading of the source and reducing sensitivity to common-mode noise. The receiver converts each differential input into complementary CMOS outputs for use by the downstream digital system.
DS90C032WLQMLV vs DS90C032QML — which should be selected?
Choose the DS90C032WLQMLV when the design requires the stated military temperature range of -55°C to +125°C and a 16-CFP package. Choose DS90C032QML when its commercial ordering temperature grade and package configuration satisfy the design. Both belong to the same DS90C032 receiver family, but the exact suffix controls environmental grade, qualification, and ordering configuration.
When should I choose DS90C032WLQMLV over DS90C032QML-SP?
Choose DS90C032WLQMLV for a military-temperature 16-CFP implementation that does not require the specific space-qualified single-event-latchup immunity stated for DS90C032QML-SP. Select DS90C032QML-SP when the space qualification and SEL immunity are required by the program. Both parts are associated with the same DS90C032 quad LVDS receiver architecture, but their qualification requirements differ.
What is the best drop-in replacement for DS90C032WLQMLV?
DS90C032QML is the closest same-family drop-in candidate because it retains the DS90C032 four-channel LVDS receiver architecture and associated 16-CFP ordering format. Before substitution, confirm the exact pin arrangement, temperature grade, qualification status, and lead finish against the manufacturer datasheet. The DS90C032WLQMLV is a specialized military-grade ordering option, so an unqualified commercial variant may not satisfy every program requirement.
What can replace DS90C032WLQMLV?
The DS90C032QML family is the relevant replacement path for a DS90C032WLQMLV receiver because it preserves the same quad LVDS functionality and 16-CFP family architecture. The suffix must be checked for operating-temperature range, qualification, and package details before design release. No unqualified cross-brand drop-in part is established here, so changing manufacturers requires a separate footprint, pinout, and signal-integrity validation.
Is DS90C032WLQMLV the same as DS26C32A?
The DS90C032WLQMLV is pin compatible with the DS26C32A according to the manufacturer datasheet, but they are not necessarily identical devices. The DS90C032 is a four-channel LVDS receiver with operation above 155.5 Mbps, while the DS26C32A belongs to a related interface family. Check every power, enable, ground, and differential-I/O connection in the manufacturer pin tables before using the compatibility statement for a direct substitution.
What is the best cross-brand equivalent for DS90C032WLQMLV?
No cross-brand equivalent is established here that satisfies all three drop-in requirements of the same package, pin-to-pin compatibility, and comparable electrical performance. The manufacturer identifies compatibility with the DS26C32A family, but that relationship alone does not establish a same-footprint cross-brand substitution. For an alternate-source project, require a documented 16-CFP land pattern, identical pin functions, compatible LVDS thresholds, and validated timing behavior.
Is DS90C032WLQMLV suitable for high-speed instrumentation?
Yes, the DS90C032WLQMLV is suitable for high-speed instrumentation links that use compatible LVDS signals. Its four receiver channels, data-rate capability above 155.5 Mbps, low power dissipation, and low differential skew support compact multi-channel acquisition systems. The receiving logic, cable or PCB pair, connector, and source-device timing must still be validated as one channel.
Where can I buy DS90C032WLQMLV and what is the lead time?
Use the Request a Quote form on this XAIPART product page to request DS90C032WLQMLV availability, current lead time, and order quantity. The manufacturer product page and its ordering options are the appropriate references for the exact 16-CFP military-grade configuration. Because this specialized suffix may have limited channel availability, confirm the current manufacturing status before committing to a production schedule.
What is the price of DS90C032WLQMLV?
The current commercial price for DS90C032WLQMLV should be requested through the Request a Quote form on this XAIPART product page. The price can depend on quantity, package form, and sourcing availability for this specialized military-grade ordering option. Request a quote with your required order quantity so procurement can confirm the exact MPN and delivery schedule.
Is DS90C032WLQMLV in stock?
Current DS90C032WLQMLV stock should be confirmed through the Request a Quote form on this XAIPART product page. The manufacturer lists the DS90C032 product family for ordering and quality support, but the DS90C032WLQMLV suffix includes specific environmental and package qualifications. Provide your forecast quantity, target date, and acceptable packaging requirements when requesting availability.
What are the key specifications of DS90C032WLQMLV that engineers should know?
The key DS90C032WLQMLV specifications are four LVDS receiver channels, operation above 155.5 Mbps at 77.7 MHz, a minimum accepted differential signal level of 330 mV, high-impedance inputs, and a -55°C to +125°C military temperature range. According to the Texas Instruments datasheet, the device uses low power dissipation and low differential skew. It is packaged in a 16-CFP ceramic flatpack and is compatible with the IEEE 1596.3 SCI LVDS standard.

Dữ liệu tham khảo kỹ thuật cho DS90C032WLQMLV — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Select the DS90C032WLQMLV when the system requires four LVDS receive channels, operation above 155.5 Mbps, and a military temperature range of -55°C to +125°C in a 16-CFP package. It is especially relevant to compact aerospace, defense, industrial, and scientific systems where interface density and low power dissipation matter. Choose DS90C032QML when its documented temperature grade meets the design and the program does not require the WL ordering configuration. Consider DS90C032QML-SP when space qualification and stated single-event-latchup immunity are mandatory. The W-QMLV and QMLV suffixes require direct review of qualification and environmental requirements before use. Although the manufacturer states compatibility with the DS26C32A family, treat that statement as a starting point rather than a substitute for a complete pinout, electrical, footprint, and lifecycle comparison. Any cross-brand design should begin with a fresh signal-integrity and qualification review rather than assuming equivalence.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này DS90C032QML DS90C032QMLV DS90C032W-QMLV DS90C032QML-SP
Package 16-CFP ceramic flatpack 16-CFP 16-CFP 16-CFP 16-CFP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Receiver Type Quad LVDS differential line receiver Quad LVDS differential line receiver Quad LVDS differential line receiver Quad LVDS differential line receiver Quad LVDS differential line receiver

Bảo phân biệt quan trọng

  • Four LVDS channels in one military-temperature receiver (vsDS90C032QML)
  • Space-qualified option with stated latchup immunity (vsDS90C032QML-SP)
  • High-speed operation in a compact integrated receiver (vsDS26C32A)

Ghi chú thiết kế

Route every LVDS pair as a tightly coupled differential pair on a continuous reference plane. Keep the positive and negative traces geometrically symmetric through vias, connectors, and transitions, and do not change one conductor’s reference geometry without changing the other. Avoid stubs and test-probe branches that create reflections. A four-channel receiver can amplify routing asymmetry effects because skew between the two conductors of any pair can affect timing margin and recovered-data integrity.

Validate the complete source-to-receiver link rather than treating the 330 mV differential sensitivity as the only design criterion. Confirm source amplitude, common-mode voltage, edge rate, trace loss, connector behavior, and receiver placement at the actual data rate. Use the DS90C032 manufacturer datasheet for input thresholds and timing limits, then simulate or measure the finished interconnect to ensure differential voltage and eye margin remain acceptable across process, temperature, and cable variations.

Estimated: the receiver’s numerical supply voltage, supply current, and thermal resistance are not established here, so a numerical junction-temperature result would not be defensible. During design release, calculate dissipation from the actual supply voltage and measured channel current, then apply the package thermal information from the manufacturer datasheet. Keep the 16-CFP thermally connected as intended and evaluate the ceramic package’s temperature-dependent dimensions so mechanical stress does not damage soldered interconnects during environmental cycling.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The manufacturer identifies IEEE 1596.3 SCI LVDS compatibility for the DS90C032 family. RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 status are not established for the exact DS90C032WLQMLV ordering option.

Dữ liệu được xác minh vào: 2026-11-16 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

DS90C032WLQMLV datasheet DS90C032WLQMLV pinout DS90C032WLQMLV datasheet pdf DS90C032WLQMLV equivalent DS90C032WLQMLV replacement DS90C032WLQMLV price DS90C032WLQMLV stock DS90C032 16-CFP pinout DS90C032 quad LVDS receiver DS90C032 155.5 Mbps DS90C032WLQMLV vs DS90C032QML DS90C032 application circuit

Các bộ phận và thuật ngữ liên quan

Texas Instruments DS90C032WLQMLV DS90C032QML DS90C032QMLV DS90C032W-QMLV DS90C032QML-SP DS26C32A LVDS Low Voltage Differential Signaling differential line receiver interface IC CMOS logic IEEE 1596.3 SCI LVDS single-event latchup 155.5 Mbps 77.7 MHz 330 mV 16-CFP ceramic flatpack surface mount military temperature grade differential skew chip-to-chip skew high-impedance input
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ