DS90C187LF/NOPB - 5.57Gbps Dual Pixel LVDS Serializer | TI
料号: DS90C187LF/NOPB ✓ 量产中DS90C187LF/NOPB 概述
A serializer is a high-speed interface device that reduces the number of parallel conductors needed to transfer pixel data between a graphics processor and a display. The FPD-Link LVDS interface combines low-voltage differential signaling, clock forwarding, and data encoding to support compact, high-speed links while limiting electromagnetic emissions and connector pin count.
The DS90C187 supports RGB-888 24-bit color and RGB-666 18-bit color operation. Its configurable architecture supports single-pixel input with single-pixel output, single-pixel input with dual-pixel output, and dual-pixel input with dual-pixel output. These configurations allow the same serializer to serve different display timing, lane-count, and panel-architecture requirements.
Power-management features include selectable output drive strength and power-saving operating modes. The 53-input, 8-output arrangement supports parallel pixel ingestion and multi-lane differential transmission, while the 92-pin VQFN-MR package provides the routing density needed for a high-speed link in a compact land pattern.
Typical uses include portable LCD panels, automotive center displays, industrial human-machine interfaces, medical monitoring displays, and other embedded systems where a parallel RGB bus must cross a noisy enclosure boundary. The differential LVDS output is particularly useful when cable length, EMI, or connector availability makes a wide parallel interface impractical.
PCB layout is the primary design challenge for this device. Place input, output, and bypass connections directly beside their associated pins, keep LVDS traces short and impedance controlled, and avoid routing high-speed signals beside switching regulators or clock-generating circuitry. Confirm the 92-pin pin-description table and reference layout in the manufacturer datasheet before assigning PCB tracks.
直接替换替代料: DS90C187LF/NOPB ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
DS90C187LFX/NOPB
✅ 直接替换联系询价
查看数据手册 →DS90C187LFE/NOPB
✅ 直接替换联系询价
查看数据手册 →DS90C187
✅ 直接替换📋 参考替代料(不在目录中)
DS90C187LF/NOPB 规格参数
| Device Type | Low-power dual-pixel FPD-Link LVDS serializer |
| Maximum Data Rate | 5.57 Gbps |
| Input Count | 53 inputs |
| Output Count | 8 outputs |
| Core Supply Voltage | 1.8 V |
| Input Signal Type | LVCMOS parallel input bus |
| Output Signal Type | FPD-Link LVDS differential outputs |
| Supported Color Depth | RGB-888 24-bit and RGB-666 18-bit |
| Pixel Configuration | Single-pixel in/single-pixel out, single-pixel in/dual-pixel out, and dual-pixel in/dual-pixel out |
| Output Drive Control | Selectable VOD |
| 封装 | 92-pin VQFN-MR (NLA), 7 x 7 mm |
| 安装类型 | Surface mount |
| 工作温度范围 | -10 °C to +70 °C |
| Order Code Suffix | LF/NOPB |
| Lead-Free Configuration | NOPB |
DS90C187LF/NOPB 92-pin vqfn-mr (nla), 7 x 7 mm 引脚配置指南
DS90C187LF/NOPB(92-pin vqfn-mr (nla), 7 x 7 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: DS90C187LF/NOPB.
请参阅 数据手册 以查看完整引脚配置。
典型应用
DS90C187LF/NOPB 适用于 6 应用s: Portable LCD Panel Interface, Automotive Center Display, Industrial HMI Panel, Medical Monitoring Display, Instrumentation and Test Equipment, Embedded Camera and Display Link.
Portable LCD Panel Interface
The DS90C187LF/NOPB fits portable LCD architectures where a host processor cannot connect to the panel through a wide parallel LVCMOS bus. Its 53 inputs accept parallel pixel information, while 8 differential outputs carry the serialized FPD-Link LVDS data toward the panel. The 5.57 Gbps capability supports modern color and timing requirements, while the 1.8 V core supply and selectable output drive help control system power. Select RGB-888 or RGB-666 to match the panel controller, then verify lane mapping and pixel timing in the manufacturer configuration tables.
推荐
Automotive Center Display
The DS90C187LF/NOPB can support the video-link portion of an automotive center display by converting a host-side LVCMOS pixel bus into compact differential lanes. Its selectable VOD and power-saving features are useful in cabin electronics where display and backlight activity can be managed for standby power. The stated -10 °C to +70 °C operating range should be checked against the vehicle environment, and automotive qualification requirements must be confirmed separately before production use. Differential signaling reduces the number of conductors crossing the head-unit enclosure.
推荐
Industrial HMI Panel
The DS90C187LF/NOPB is suited to industrial human-machine interface panels where a controller board and display may be separated by a short cable or a noisy chassis region. The 53-input parallel interface permits RGB pixel data to enter the serializer, and the 8 LVDS outputs reduce wiring complexity at the panel connection. RGB-888 24-bit operation preserves full-color information when the display pipeline requires it. Configure single-pixel or dual-pixel routing to match the panel controller and maintain controlled impedance across connector and cable transitions.
推荐
Medical Monitoring Display
The DS90C187LF/NOPB can be used in a medical monitoring display subsystem that separates a graphics processor from a high-resolution panel. Serialized differential signaling lowers the connector pin count and helps maintain signal integrity where a parallel bus would be more susceptible to skew and crosstalk. The 5.57 Gbps rate and RGB-888 support accommodate high-frame-rate visual data, subject to the host timing and panel requirements. Confirm that the complete medical system, rather than this interface device alone, satisfies its applicable safety and regulatory requirements.
推荐
Instrumentation and Test Equipment
The DS90C187LF/NOPB supports compact color-display designs in instruments, analyzers, and test systems where the display controller is located on a separate board. Its parallel-to-LVDS conversion replaces a wide ribbon-cable connection with a smaller differential interface, improving routing flexibility inside the enclosure. The selectable pixel arrangements permit one serializer platform to serve multiple panel architectures, while RGB-666 mode can reduce link demand when the instrument display does not require full color depth. Validate the selected mode against the controller and panel timing.
推荐
Embedded Camera and Display Link
The DS90C187LF/NOPB can bridge a parallel image bus into an FPD-Link LVDS connection within an embedded imaging system. The 5.57 Gbps interface rate and configurable pixel routing make it suitable for systems that distribute display timing over a compact differential link. RGB-888 supports 24-bit color pipelines, while the dual-pixel configurations provide options for balanced lane utilization. Design the LVDS routing as a controlled-impedance interface and account for connector, cable, and endpoint tolerances when defining the loss budget.
推荐
推荐产品汇总
工程参考数据: DS90C187LF/NOPB ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | DS90C187LFX/NOPB | DS90C187LFE/NOPB | DS90C187 |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | VQFN-MR (NLA), 92-pin, 7 x 7 mm | VQFN-MR (NLA), 92-pin, 7 x 7 mm | VQFN-MR (NLA), 92-pin, 7 x 7 mm | VQFN-MR (NLA), 92-pin, 7 x 7 mm |
| Device Type | Dual-pixel FPD-Link LVDS serializer | Dual-pixel FPD-Link LVDS serializer | Dual-pixel FPD-Link LVDS serializer | Dual-pixel FPD-Link LVDS serializer |
| Maximum Data Rate | 5.57 Gbps | 5.57 Gbps | 5.57 Gbps | 5.57 Gbps |
| Input Count | 53 inputs | 53 inputs | 53 inputs | 53 inputs |
| Output Count | 8 outputs | 8 outputs | 8 outputs | 8 outputs |
| Core Supply Voltage | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| Color Support | RGB-888 24-bit and RGB-666 18-bit | RGB-888 24-bit and RGB-666 18-bit | RGB-888 24-bit and RGB-666 18-bit | RGB-888 24-bit and RGB-666 18-bit |
关键差异点
- High-speed dual-pixel FPD-Link serialization in a compact 92-pin module (对比 DS90C187LFX/NOPB)
- Three configurable pixel-routing arrangements (对比 DS90C187LFE/NOPB)
- Full-color and reduced-color operating modes (对比 DS90C187)
- Selectable output drive for link tuning (对比 DS90C187LFX/NOPB)
设计说明
Use the 92-pin manufacturer reference layout as the basis for signal routing. Keep every LVDS differential pair together, match intra-pair spacing as closely as practical, and avoid routing across plane splits or through unrelated noisy circuitry. Because the package contains many high-speed, supply, configuration, and parallel-data pins, early layer planning prevents late-stage layer changes that would force vias into otherwise clean differential channels.
Treat the FPD-Link LVDS outputs as a controlled-impedance interface. Select the stack-up and trace dimensions using the board fabricator's impedance model, then verify differential impedance and pair-to-pair skew after fabrication. Keep connector and cable transitions short, maintain a continuous reference plane under each pair, and use the manufacturer's configuration tables to avoid enabling a pixel mode that exceeds the endpoint's lane mapping or timing capability.
Place all required bypass capacitors directly beside their associated power and ground pins, and provide a low-impedance return path through the package ground and thermal structures defined in the datasheet. The 1.8 V core rail and the parallel input bus can both carry switching current; routing them away from LVDS outputs reduces coupling into the serialized pixel stream. Confirm the supported input voltage levels and supply sequencing in the manufacturer datasheet before connecting the host interface.
Do not interchange the full ordering code based only on the base DS90C187 designation. Confirm package, pin count, temperature range, shipping format, and lifecycle status for every suffix. Also verify that the selected RGB depth and single-pixel or dual-pixel configuration match the display controller; a pin-compatible serializer can still fail at the data level if its color mapping, lane assignment, or clocking configuration differs.
合规信息
The NOPB ordering suffix identifies a lead-free configuration. RoHS, REACH, halogen-free, conflict-minerals, and automotive qualification statements require confirmation from the manufacturer's compliance documentation for the exact ordering code.