Texas Instruments

DS90C187LF/NOPB - 5.57Gbps Dual Pixel LVDS Serializer | TI

MPN: DS90C187LF/NOPB ✓ פעיל
1.8 V Vdss 92-pin VQFN-MR (NLA), 7 x 7 mm Package
כמות הזמנה מינימלית: 1 |

DS90C187LF/NOPB סקירה

The Texas Instruments DS90C187LF/NOPB is a 5.57 Gbps low-power dual-pixel FPD-Link LVDS serializer packaged in a 92-pin VQFN-MR module with 53 inputs and 8 outputs. It converts a parallel LVCMOS RGB bus into FPD-Link LVDS lanes for display and camera interfaces, operating from a 1.8 V core supply.

A serializer is a high-speed interface device that reduces the number of parallel conductors needed to transfer pixel data between a graphics processor and a display. The FPD-Link LVDS interface combines low-voltage differential signaling, clock forwarding, and data encoding to support compact, high-speed links while limiting electromagnetic emissions and connector pin count.

The DS90C187 supports RGB-888 24-bit color and RGB-666 18-bit color operation. Its configurable architecture supports single-pixel input with single-pixel output, single-pixel input with dual-pixel output, and dual-pixel input with dual-pixel output. These configurations allow the same serializer to serve different display timing, lane-count, and panel-architecture requirements.

Power-management features include selectable output drive strength and power-saving operating modes. The 53-input, 8-output arrangement supports parallel pixel ingestion and multi-lane differential transmission, while the 92-pin VQFN-MR package provides the routing density needed for a high-speed link in a compact land pattern.

Typical uses include portable LCD panels, automotive center displays, industrial human-machine interfaces, medical monitoring displays, and other embedded systems where a parallel RGB bus must cross a noisy enclosure boundary. The differential LVDS output is particularly useful when cable length, EMI, or connector availability makes a wide parallel interface impractical.

PCB layout is the primary design challenge for this device. Place input, output, and bypass connections directly beside their associated pins, keep LVDS traces short and impedance controlled, and avoid routing high-speed signals beside switching regulators or clock-generating circuitry. Confirm the 92-pin pin-description table and reference layout in the manufacturer datasheet before assigning PCB tracks.

חלופות תחליף ישיר עבור DS90C187LF/NOPB — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

DS90C187LFX/NOPB

✅ Drop-In
Texas Instruments
📦 VQFN-MR (NLA), 92-pin, 7 x 7 mm
Low-power dual-pixel FPD-Link LVDS serializer · 5.57 Gbps · 53 inputs · 8 outputs · 1.8 V · Up to 48 bits of 1.8 V LVCMOS · Dual pixel, 24-bit color per pixel · QXGA 2048 x 1536 at 60 Hz

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

DS90C187LFE/NOPB

✅ Drop-In
Texas Instruments
📦 VQFN-MR (NLA), 92-pin, 7 x 7 mm
Dual-pixel FPD-Link LVDS serializer · 1.8 V · 5.565 Gbps · 0.45 V · 1.8 V LVCMOS parallel data · FPD-Link LVDS · RGB-888 (24-bit) and RGB-666 (18-bit) · 48 bits in dual-pixel mode

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

DS90C187

✅ Drop-In
📦 VQFN-MR (NLA), 92-pin, 7 x 7 mm
Base device designation for the same 5.57 Gbps dual-pixel FPD-Link serializer; complete orderable suffix must be selected before procurement

📋 חלופה להתייחסות (לא בקטלוג)

DS90C187LF/NOPB מפרטים

Device Type Low-power dual-pixel FPD-Link LVDS serializer
Maximum Data Rate 5.57 Gbps
Input Count 53 inputs
Output Count 8 outputs
Core Supply Voltage 1.8 V
Input Signal Type LVCMOS parallel input bus
Output Signal Type FPD-Link LVDS differential outputs
Supported Color Depth RGB-888 24-bit and RGB-666 18-bit
Pixel Configuration Single-pixel in/single-pixel out, single-pixel in/dual-pixel out, and dual-pixel in/dual-pixel out
Output Drive Control Selectable VOD
מארז 92-pin VQFN-MR (NLA), 7 x 7 mm
סוג הרכבה Surface mount
טווח טמפרטורת פעולה -10 °C to +70 °C
Order Code Suffix LF/NOPB
Lead-Free Configuration NOPB

מדריך תצורת פינים של DS90C187LF/NOPB 92-pin vqfn-mr (nla), 7 x 7 mm

תצורת פינים עבור DS90C187LF/NOPB (מארזת 92-pin vqfn-mr (nla), 7 x 7 mm). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 92-pin vqfn-mr (nla), 7 x 7 mm עבור DS90C187LF/NOPB

אין נתוני פריסת פינים מפורטים עבור DS90C187LF/NOPB.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

DS90C187LF/NOPB מתאים עבור 6 יישוםs: Portable LCD Panel Interface, Automotive Center Display, Industrial HMI Panel, Medical Monitoring Display, Instrumentation and Test Equipment, Embedded Camera and Display Link.

📱

Portable LCD Panel Interface

The DS90C187LF/NOPB fits portable LCD architectures where a host processor cannot connect to the panel through a wide parallel LVCMOS bus. Its 53 inputs accept parallel pixel information, while 8 differential outputs carry the serialized FPD-Link LVDS data toward the panel. The 5.57 Gbps capability supports modern color and timing requirements, while the 1.8 V core supply and selectable output drive help control system power. Select RGB-888 or RGB-666 to match the panel controller, then verify lane mapping and pixel timing in the manufacturer configuration tables.

🚗

Automotive Center Display

The DS90C187LF/NOPB can support the video-link portion of an automotive center display by converting a host-side LVCMOS pixel bus into compact differential lanes. Its selectable VOD and power-saving features are useful in cabin electronics where display and backlight activity can be managed for standby power. The stated -10 °C to +70 °C operating range should be checked against the vehicle environment, and automotive qualification requirements must be confirmed separately before production use. Differential signaling reduces the number of conductors crossing the head-unit enclosure.

🏭

Industrial HMI Panel

The DS90C187LF/NOPB is suited to industrial human-machine interface panels where a controller board and display may be separated by a short cable or a noisy chassis region. The 53-input parallel interface permits RGB pixel data to enter the serializer, and the 8 LVDS outputs reduce wiring complexity at the panel connection. RGB-888 24-bit operation preserves full-color information when the display pipeline requires it. Configure single-pixel or dual-pixel routing to match the panel controller and maintain controlled impedance across connector and cable transitions.

💊

Medical Monitoring Display

The DS90C187LF/NOPB can be used in a medical monitoring display subsystem that separates a graphics processor from a high-resolution panel. Serialized differential signaling lowers the connector pin count and helps maintain signal integrity where a parallel bus would be more susceptible to skew and crosstalk. The 5.57 Gbps rate and RGB-888 support accommodate high-frame-rate visual data, subject to the host timing and panel requirements. Confirm that the complete medical system, rather than this interface device alone, satisfies its applicable safety and regulatory requirements.

🔧

Instrumentation and Test Equipment

The DS90C187LF/NOPB supports compact color-display designs in instruments, analyzers, and test systems where the display controller is located on a separate board. Its parallel-to-LVDS conversion replaces a wide ribbon-cable connection with a smaller differential interface, improving routing flexibility inside the enclosure. The selectable pixel arrangements permit one serializer platform to serve multiple panel architectures, while RGB-666 mode can reduce link demand when the instrument display does not require full color depth. Validate the selected mode against the controller and panel timing.

🎥

Embedded Camera and Display Link

The DS90C187LF/NOPB can bridge a parallel image bus into an FPD-Link LVDS connection within an embedded imaging system. The 5.57 Gbps interface rate and configurable pixel routing make it suitable for systems that distribute display timing over a compact differential link. RGB-888 supports 24-bit color pipelines, while the dual-pixel configurations provide options for balanced lane utilization. Design the LVDS routing as a controlled-impedance interface and account for connector, cable, and endpoint tolerances when defining the loss budget.

סיכום מוצרים מומלצים

DS90C187LF/NOPB Texas Instruments בשימוש ב-: Portable LCD Panel Interface, Automotive Center Display, Industrial HMI Panel, Medical Monitoring Display, Instrumentation and Test Equipment, Embedded Camera and Display Link DS90C187LFX/NOPB Same-family orderable configuration בשימוש ב-: Portable LCD Panel Interface, Automotive Center Display, Instrumentation and Test Equipment DS90C187 Base family designation for panel-interface design בשימוש ב-: Industrial HMI Panel, Embedded Camera and Display Link DS90C187LFE/NOPB Same-family ordering configuration for lifecycle review בשימוש ב-: Medical Monitoring Display
What is the DS90C187LF/NOPB?
The DS90C187LF/NOPB is a Texas Instruments 5.57 Gbps dual-pixel FPD-Link LVDS serializer with 53 inputs and 8 outputs in a 92-pin VQFN-MR package. According to the manufacturer datasheet, it converts a parallel LVCMOS pixel bus into differential FPD-Link LVDS lanes and supports RGB-888 24-bit or RGB-666 18-bit color. It is intended for portable and embedded display links where a compact, low-power serial interface replaces a wide parallel bus.
What are the key specifications engineers should know about DS90C187LF/NOPB?
The principal DS90C187LF/NOPB specifications are a 5.57 Gbps maximum data rate, 53 inputs, 8 outputs, a 1.8 V core supply, and a 92-pin VQFN-MR package measuring 7 x 7 mm. The manufacturer datasheet also identifies RGB-888 and RGB-666 operation, three pixel-routing configurations, and selectable output drive strength. These parameters place the device in the class of high-speed SerDes ICs used to transfer display data across compact LVDS links.
Where can I download the DS90C187LF/NOPB datasheet PDF?
The DS90C187LF/NOPB datasheet PDF is available from the Texas Instruments product page at https://www.ti.com/lit/gpn/DS90C187 and the device page at https://www.ti.com/product/DS90C187. The manufacturer document contains the electrical characteristics, 92-pin description, configuration tables, and recommended application layout. Use the pin-description table for PCB track assignments rather than inferring signal names from the package drawing.
Where can I find the DS90C187LF/NOPB pinout?
The DS90C187LF/NOPB pinout is documented in the manufacturer datasheet, which describes the 92-pin VQFN-MR package and its signal assignments. The package is identified as NLA with 92 pins and a 7 x 7 mm body. Because the complete pin map is not published in the product listing, consult the pin-description table in the datasheet and verify every power, ground, clock, data, and configuration connection against the exact ordering code before layout release.
What is the difference between DS90C187LF/NOPB and DS90C187LFX/NOPB?
DS90C187LF/NOPB and DS90C187LFX/NOPB identify orderable versions of the same DS90C187 serializer family, and both use the 92-pin VQFN-MR package with 53 inputs, 8 outputs, and a 5.57 Gbps data rate. The distinguishing information is carried by the full ordering codes rather than the core specifications. Confirm the shipping format, temperature treatment, and ordering-option meanings in the TI ordering information before substituting one code for the other.
Is the DS90C187LF/NOPB suitable for an automotive display?
The DS90C187LF/NOPB can implement the required FPD-Link data transfer for a display design, but automotive suitability depends on the complete system qualification rather than interface function alone. The manufacturer listing gives an operating temperature range of -10 °C to +70 °C and the part is not identified as AEC-Q100 qualified in the available product information. Automotive programs should verify AEC-Q100 grade, temperature range, and display-interface timing against their system requirements.
When should I choose DS90C187LF/NOPB instead of a parallel RGB serializer?
Choose the DS90C187LF/NOPB when a wide parallel LVCMOS bus must be converted into fewer differential lanes, particularly where cable routing, connector size, or electromagnetic emissions make parallel signaling difficult. Its 53-input, 8-output architecture supports multiple pixel-routing arrangements, including single-pixel input and dual-pixel output. Retain a direct parallel interface when short board-to-board distances, maximum simplicity, or no external cable connection makes the extra serializer function unnecessary.
Can DS90C187LF/NOPB replace a parallel-display link in a portable system?
The DS90C187LF/NOPB can replace a parallel-display link when the host supplies compatible LVCMOS pixel data and the display endpoint accepts the corresponding FPD-Link LVDS configuration. Its 1.8 V core supply, selectable output drive, and configurable pixel routing align with compact portable and embedded display architectures. A complete replacement still requires matching color depth, timing, lane mapping, clocking, power rails, and the endpoint deserializer.
What can replace the DS90C187LF/NOPB?
The closest documented replacements are orderable members of the same DS90C187 family, including DS90C187LFX/NOPB and DS90C187LFE/NOPB, which use the same 92-pin VQFN-MR device platform and the same 5.57 Gbps, 53-input, 8-output core configuration. Cross-manufacturer equivalents are not established in the available manufacturer information. Verify ordering-code suffixes, shipping format, temperature treatment, and lifecycle status before treating any family member as a direct substitute.
Is DS90C187LF/NOPB the same as a generic FPD-Link serializer?
No. The DS90C187LF/NOPB is a specific Texas Instruments implementation with a defined 53-input, 8-output architecture, a 5.57 Gbps data rate, a 1.8 V core supply, and configurable single- or dual-pixel routing. Other FPD-Link serializers may use different lane counts, data rates, color formats, or pin arrangements. Functional equivalence therefore does not guarantee drop-in compatibility at the PCB or firmware-configuration level.
How do I configure RGB-888 or RGB-666 mode on DS90C187LF/NOPB?
The DS90C187LF/NOPB supports RGB-888 24-bit color and RGB-666 18-bit color through its configuration interface, with operating arrangements for single-pixel and dual-pixel routing. According to the manufacturer datasheet, the device can be configured for single-pixel in/single-pixel out, single-pixel in/dual-pixel out, or dual-pixel in/dual-pixel out. Use the configuration tables and register descriptions in the datasheet to match panel timing and lane assignment.
Do I need controlled-impedance PCB traces for DS90C187LF/NOPB?
Yes. Controlled-impedance routing is a best practice for the DS90C187LF/NOPB FPD-Link LVDS outputs because trace discontinuities and impedance mismatch can degrade signal integrity. Use the stack-up and reference layout from the manufacturer datasheet, place differential pairs together, minimize vias and stubs, and provide via stitching on ground planes where the reference design calls for it. Keep switching nodes and high-current supply paths away from the LVDS pair routing.
How is power handled on the DS90C187LF/NOPB?
The DS90C187LF/NOPB operates from a 1.8 V core supply and includes selectable output drive and power-saving features for display applications. Place the required bypass capacitors at the associated supply and ground pins, and keep the high-current return path short through the package ground and exposed-pad structure specified by the manufacturer layout. Confirm all external supply levels and sequencing requirements against the datasheet before connecting the serializer to a host processor.
Where can I buy DS90C187LF/NOPB and check current availability?
Use the Request a Quote form on this page to request the current DS90C187LF/NOPB price, stock position, minimum order quantity, and lead time for your required quantity and shipping format. The request can also identify authorized supply routes for the exact ordering code. Lifecycle and packaging confirmations should be included in the quotation so that the received device matches the required DS90C187LF/NOPB configuration.
What is the typical lead time and MOQ for DS90C187LF/NOPB?
The current lead time and minimum order quantity for DS90C187LF/NOPB should be confirmed through the Request a Quote form on this page. Quote response time depends on manufacturer stock, production planning, package format, and the quantity being scheduled. Include your annual usage, forecast, and required shipping format in the request so that the returned schedule reflects the configuration you intend to productionize.

נתוני עזר הנדסיים עבור DS90C187LF/NOPB — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose DS90C187LF/NOPB when a design needs a 1.8 V, 5.57 Gbps dual-pixel FPD-Link serializer with 53 parallel inputs, 8 differential outputs, and configurable RGB routing. DS90C187LFX/NOPB is the closest same-footprint ordering alternative, but its NLA lifecycle designation requires availability review. DS90C187LFE/NOPB may suit procurement situations requiring that specific suffix, provided its ordering and lifecycle details are confirmed. The base DS90C187 designation identifies the device family but does not replace a complete orderable part number. None of these alternatives eliminates the need to match color depth, pixel mode, lane mapping, clocking, and panel timing to the receiving controller. For a different manufacturer or a different package, treat the selection as a redesign rather than a drop-in substitution.

השוואה עם חלופות

פרמטר מוצר זה DS90C187LFX/NOPB DS90C187LFE/NOPB DS90C187
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package VQFN-MR (NLA), 92-pin, 7 x 7 mm VQFN-MR (NLA), 92-pin, 7 x 7 mm VQFN-MR (NLA), 92-pin, 7 x 7 mm VQFN-MR (NLA), 92-pin, 7 x 7 mm
Device Type Dual-pixel FPD-Link LVDS serializer Dual-pixel FPD-Link LVDS serializer Dual-pixel FPD-Link LVDS serializer Dual-pixel FPD-Link LVDS serializer
Maximum Data Rate 5.57 Gbps 5.57 Gbps 5.57 Gbps 5.57 Gbps
Input Count 53 inputs 53 inputs 53 inputs 53 inputs
Output Count 8 outputs 8 outputs 8 outputs 8 outputs
Core Supply Voltage 1.8 V 1.8 V 1.8 V 1.8 V
Color Support RGB-888 24-bit and RGB-666 18-bit RGB-888 24-bit and RGB-666 18-bit RGB-888 24-bit and RGB-666 18-bit RGB-888 24-bit and RGB-666 18-bit

מבדילים עיקריים

  • High-speed dual-pixel FPD-Link serialization in a compact 92-pin module (לעומתDS90C187LFX/NOPB)
  • Three configurable pixel-routing arrangements (לעומתDS90C187LFE/NOPB)
  • Full-color and reduced-color operating modes (לעומתDS90C187)
  • Selectable output drive for link tuning (לעומתDS90C187LFX/NOPB)

הערות תכנון

Use the 92-pin manufacturer reference layout as the basis for signal routing. Keep every LVDS differential pair together, match intra-pair spacing as closely as practical, and avoid routing across plane splits or through unrelated noisy circuitry. Because the package contains many high-speed, supply, configuration, and parallel-data pins, early layer planning prevents late-stage layer changes that would force vias into otherwise clean differential channels.

Treat the FPD-Link LVDS outputs as a controlled-impedance interface. Select the stack-up and trace dimensions using the board fabricator's impedance model, then verify differential impedance and pair-to-pair skew after fabrication. Keep connector and cable transitions short, maintain a continuous reference plane under each pair, and use the manufacturer's configuration tables to avoid enabling a pixel mode that exceeds the endpoint's lane mapping or timing capability.

Place all required bypass capacitors directly beside their associated power and ground pins, and provide a low-impedance return path through the package ground and thermal structures defined in the datasheet. The 1.8 V core rail and the parallel input bus can both carry switching current; routing them away from LVDS outputs reduces coupling into the serialized pixel stream. Confirm the supported input voltage levels and supply sequencing in the manufacturer datasheet before connecting the host interface.

Do not interchange the full ordering code based only on the base DS90C187 designation. Confirm package, pin count, temperature range, shipping format, and lifecycle status for every suffix. Also verify that the selected RGB depth and single-pixel or dual-pixel configuration match the display controller; a pin-compatible serializer can still fail at the data level if its color mapping, lane assignment, or clocking configuration differs.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Yes
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The NOPB ordering suffix identifies a lead-free configuration. RoHS, REACH, halogen-free, conflict-minerals, and automotive qualification statements require confirmation from the manufacturer's compliance documentation for the exact ordering code.

הנתונים אומתו בתאריך: 2026-11-16 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

DS90C187LF/NOPB DS90C187LF/NOPB datasheet DS90C187LF/NOPB datasheet pdf DS90C187LF/NOPB pinout DS90C187LF/NOPB specifications DS90C187LF/NOPB equivalent DS90C187LF/NOPB replacement DS90C187LF/NOPB vs DS90C187LFX/NOPB DS90C187 92 pin VQFN pinout DS90C187 RGB 888 serializer DS90C187 FPD-Link LVDS application circuit Texas Instruments DS90C187 DS90C187LF/NOPB price DS90C187LF/NOPB stock 5.57Gbps dual pixel LVDS serializer

רכיבים ומונחים קשורים

Texas Instruments DS90C187LF/NOPB DS90C187LFX/NOPB DS90C187LFE/NOPB DS90C187 FPD-Link LVDS LVCMOS serializer deserializer SerDes IC parallel-to-serial interface display interface RGB-888 RGB-666 dual-pixel transmission 5.57 Gbps selectable VOD VQFN-MR NLA package controlled impedance differential signaling portable LCD automotive center display industrial HMI
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר