DS90LV032AW-MLS - 400Mbps Quad LVDS Receiver | Texas Instruments
料号: DS90LV032AW-MLS ✓ 量产中DS90LV032AW-MLS 概述
An LVDS receiver is an interface circuit that detects a small differential voltage across a balanced signal pair and converts it into a logic-level output. LVDS belongs to the differential data-interface hierarchy, where low-amplitude, noise-resistant signaling supports reliable high-speed data transfer over circuit-board interconnects. The DS90LV032A family therefore belongs to interface ICs, low-voltage differential signaling receivers, and high-speed CMOS interface devices.
The primary features of this quad receiver include four differential receiver channels, support for data rates in excess of 400 Mbps, a typical input sensitivity of 350 mV, and CMOS output signaling. The device is designed for high-speed point-to-point links where differential signaling reduces susceptibility to common-mode noise. Its quad-channel organization also allows one package to terminate four independent data pairs.
The DS90LV032A architecture uses low-power CMOS circuitry to translate the small-amplitude LVDS inputs into full-swing CMOS outputs. According to the Texas Instruments datasheet, the family supports propagation delay of up to 3.3 ns and includes low channel-to-channel and differential skew characteristics. This combination is useful when timing margins are limited, particularly in parallel data buses, backplanes, and clock-distribution networks.
Typical applications include LVDS backplanes, industrial control links, high-speed instrumentation, point-to-point inter-board communication, and data-acquisition systems that require multiple low-voltage differential inputs. The device can receive data from compatible LVDS transmitters over controlled-impedance printed circuit board traces. Because it is a receiver rather than a transceiver, each channel still requires an external LVDS source and correctly terminated signal pair.
PCB implementation must preserve controlled impedance, minimize stubs, and route each differential pair as a tightly coupled pair. Inputs should not be left floating when the receiver is powered, and the power-supply network should be decoupled close to the device. Because CFP packages are not represented by the available package-diagram library, the manufacturer pin-description table should be used when assigning PCB tracks.
This product page combines the exact DS90LV032AW-MLS ordering information with receiver specifications, package details, drop-in alternatives, application guidance, and design considerations. The comparison information is intended to clarify temperature grade, packaging, and ordering differences before a component is selected for a high-speed LVDS interface.
直接替换替代料: DS90LV032AW-MLS ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
DS90LV032AW-QML
✅ 直接替换📋 参考替代料(不在目录中)
DS90LV032AWGQML
✅ 直接替换📋 参考替代料(不在目录中)
DS90LV032AW-MLS 规格参数
| Product Type | LVDS quad differential line receiver |
| Logic Family | CMOS |
| 电源电压 | 3.3 V |
| Maximum Data Rate | >400 Mbps |
| Maximum Switching Rate | 200 MHz |
| Receiver Channel Count | 4 channels |
| Typical Differential Input Voltage | 350 mV |
| Maximum Propagation Delay | 3.3 ns |
| Typical Channel-to-Channel Skew | 0.1 ns |
| Typical Differential Skew | 0.1 ns |
| Static Power Consumption | 40 mW at 3.3 V |
| Power-Down Input Behavior | High impedance on LVDS inputs |
| 工作温度范围 | -55°C to +85°C |
| 封装 | 16-pin CFP (NAD) |
| 安装类型 | Surface mount |
| Terminal Count | 16 pins |
DS90LV032AW-MLS 16-pin cfp (nad) 引脚配置指南
DS90LV032AW-MLS(16-pin cfp (nad) 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: DS90LV032AW-MLS.
请参阅 数据手册 以查看完整引脚配置。
典型应用
DS90LV032AW-MLS 适用于 6 应用s: High-Speed Backplane Links, Industrial Control Systems, Data-Acquisition Equipment, Point-to-Point Inter-Board Communication, Clock and Parallel Data Distribution, Test and Measurement Interfaces.
High-Speed Backplane Links
The DS90LV032AW-MLS is suitable for receiving high-speed LVDS data over controlled-impedance backplane traces. Its four differential channels support data rates in excess of 400 Mbps, while the typical 350 mV input threshold accommodates the small-amplitude signals used by LVDS links. A board designer can connect each receiver channel to a matched differential pair, add the termination required by the link architecture, and route the pair with minimal discontinuity. The principal benefit is the combination of four receivers and a maximum propagation delay of 3.3 ns in one 16-pin CFP package, which simplifies multi-lane termination and helps preserve timing margin across a backplane.
推荐
Industrial Control Systems
The DS90LV032AW-MLS can serve as the receive interface for industrial equipment that distributes commands or measurements across multiple LVDS links. Its -55°C to +85°C temperature rating supports equipment expected to operate across wide environmental conditions, while the 400 Mbps data-rate capability is well above ordinary control-command rates. Four differential inputs allow independent channels to share one receiver package without introducing a separate IC for each link. The receiver should be used with a compatible LVDS transmitter, correct source termination, and a ground reference that keeps common-mode voltage within the device limits. Firmware designers should account for the specified propagation delay when defining communication timeouts and bus turnaround intervals.
推荐
Data-Acquisition Equipment
The DS90LV032AW-MLS is appropriate for data-acquisition and instrumentation systems in which several high-speed differential channels feed digital processing logic. Four independent LVDS inputs reduce the number of receiver packages required on a measurement card, while the typical 350 mV differential input amplitude is compatible with standard LVDS signaling. The receiver produces CMOS outputs that can be routed to an FPGA, microcontroller, or data-capture engine after the entire signal path has been validated. Designers should preserve controlled-impedance routing, avoid long stubs, and account for the 3.3 ns maximum propagation delay when defining acquisition timing. The -55°C to +85°C range also supports industrial and extended-temperature measurement equipment.
推荐
Point-to-Point Inter-Board Communication
The DS90LV032AW-MLS supports compact inter-board communication links where a transmitting device sends low-voltage differential data to the receiver. Data rates above 400 Mbps provide margin for synchronous transfers, and the four-channel configuration allows several point-to-point connections to terminate on one receiver device. A practical implementation requires matched trace geometry, reference-plane continuity, and the termination strategy specified for the particular LVDS transmitter. The receiver's 3.3 V supply and CMOS output levels integrate naturally with 3.3 V digital logic, provided the receiving logic recognizes the resulting output timing. Compared with single-ended links, differential reception reduces susceptibility to common-mode noise when the PCB layout is implemented correctly.
推荐
Clock and Parallel Data Distribution
The DS90LV032AW-MLS can receive multiple synchronized differential signals in clock-distribution and parallel-data systems. Its typical channel-to-channel skew and differential skew characteristics are useful when several lanes must reach downstream logic with closely related timing. Because the device supports data rates above 400 Mbps, it can accommodate source-synchronous clock and data pairs transmitted across a controlled-impedance board connection. The four receiver outputs become CMOS signals for downstream gates or controllers, while the maximum propagation delay of 3.3 ns defines an important edge-timing limit. Layout should minimize trace-length differences within each pair, provide a continuous reference plane, and isolate the links from switching-node and high-current return paths.
推荐
Test and Measurement Interfaces
The DS90LV032AW-MLS is useful in test and measurement equipment that receives differential data from remote sensor heads, detector modules, or instrument front ends. Four channels allow compact multi-lane acquisition, and the specified 3.3 ns maximum propagation delay provides a defined upper bound for digital timing analysis. The extended -55°C to +85°C rating supports laboratory, industrial, and monitored field environments when the complete equipment has been qualified for the same range. For reliable results, the receiver must remain connected to a defined common-mode range and properly terminated source. PCB designers should keep the receiver away from noisy analog return paths and use short, symmetrical routing between the connector or sensor interface and the CFP package inputs.
推荐
推荐产品汇总
工程参考数据: DS90LV032AW-MLS ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | DS90LV032AW-QML | DS90LV032AWGQML |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 16-pin CFP (NAD) | 16-pin CFP (NAD) | 16-pin CFP (NAD) |
| Receiver Type | Quad CMOS differential LVDS line receiver | Quad CMOS differential LVDS line receiver | Quad CMOS differential LVDS line receiver |
| Channel Count | 4 channels | 4 channels | 4 channels |
| Maximum Data Rate | >400 Mbps | >400 Mbps | >400 Mbps |
| Maximum Switching Rate | >200 MHz | >200 MHz | >200 MHz |
| Typical Differential Input Voltage | 350 mV | 350 mV | 350 mV |
| Maximum Propagation Delay | 3.3 ns | 3.3 ns | 3.3 ns |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V |
| Ordering Code | DS90LV032AW-MLS | DS90LV032AW-QML | DS90LV032AWGQML |
关键差异点
- Extended-temperature ordering configuration (对比 DS90LV032AW-QML)
- Four high-speed differential channels in one package (对比 DS90LV032AWGQML)
- Low propagation delay for high-speed LVDS reception (对比 DS90LV032AW-QML)
设计说明
Route each LVDS signal as a tightly coupled differential pair over a continuous reference plane. Match the pair geometry to the PCB stack-up's intended differential impedance, minimize vias and stubs, and keep the two conductors within the length tolerance required by the link. Do not route LVDS pairs adjacent to switching-node traces or high-current return paths, because even a small differential signal can be corrupted by common-mode noise coupled into the receiver inputs.
Use the termination arrangement specified by the connected LVDS transmitter and system architecture rather than adding an arbitrary resistor at the receiver. The DS90LV032AW-MLS accepts a typical differential input voltage of 350 mV, but correct signal amplitude also depends on source impedance, cable or PCB loss, and termination. Validate input eye margin, differential skew, and propagation-delay behavior in the final assembled board rather than relying only on schematic simulation.
Provide a stable 3.3 V supply and place the required decoupling capacitors close to the device power and ground pins. Keep the supply-return path short and use a continuous ground reference beneath the receiver and its associated routing. The receiver's static power is low, but external LVDS drivers and the switched load on the same rail can create transient current; separating noisy supply paths from the receiver reduces noise coupling into the high-speed interface.
Do not select a receiver merely because it uses LVDS or has the same number of channels. Confirm that the alternative uses the same 16-pin CFP footprint, pin functions, supply voltage, input threshold, output logic levels, and temperature range. Before substituting DS90LV032AW-QML or DS90LV032AWGQML, compare the manufacturer ordering table, package drawing, and pin-description table. A footprint match without equivalent pin functions is not a usable drop-in replacement.
合规信息
The DS90LV032AW-MLS is identified as a Texas Instruments military-temperature product in a 16-pin CFP (NAD) package. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer product documentation.