DSPIC33EP128MC202T-I/SO - 16-bit 70 MIPS DSC, 128KB Flash | Microchip
料号： DSPIC33EP128MC202T-I/SO ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
DSPIC33EP128MC202T-I/SO 概述
A digital signal controller combines the computational architecture of a microcontroller with the math acceleration of a digital signal processor. In the power-management hierarchy, the dsPIC33EP sits above general-purpose MCUs like the PIC16 series, offering single-cycle MAC instructions, hardware divide, and DSP engine features that make it a power management IC controller for motor drive and digital power conversion systems.
Key differentiating features include the 70 MIPS dsPIC33E core with integrated DSP engine, motor-control-specific peripherals, in-circuit and in-application programming capability, two program and two complex data breakpoints, and IEEE 1149.2-compatible (JTAG) boundary scan with trace and run-time watch. The tape-and-reel (T) suffix supports automated assembly for volume production.
Architecturally, the dsPIC33E core integrates a 16-bit modified Harvard pipeline with an on-chip DSP engine that performs single-cycle MAC operations, enabling high-bandwidth control loops required by field-oriented motor control. The MC (Motor Control) sub-family adds complementary PWM outputs, quadrature encoder interfaces, and high-speed ADC peripherals tailored for BLDC, permanent-magnet synchronous, and stepper motor drive topologies.
Typical applications include brushless DC and PMSM motor control, digital power supplies (PFC, LLC), industrial automation, and servo drives. The MC peripheral set and 70 MIPS headroom allow designers to build energy-efficient, quieter, longer-range motor systems as highlighted by Microchip.
Design consideration: the industrial (I) suffix is rated to +85C; for automotive ambient ranges choose the E-temperature (up to +125C) variant such as DSPIC33EP128MC202T-E/SO, verifying AEC-Q100 qualification requirements for your program.
This page synthesizes distributor data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
直接替换替代料： DSPIC33EP128MC202T-I/SO ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： DSPIC33EP128MC202T-I/SO （相同外形与封装尺寸） ——差异在于 Package, Operating Temperature, Supply Voltage, Core Architecture, Qualification.
快速对比工具——选择替代料号进行并排对比：
DSPIC33EP128MC202T-E/SO
✅ 直接替换✓ 有现货
$2.97 / 个
查看数据手册 →DSPIC33EP128MC202-I/SO
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$3.92 / 个
查看数据手册 →DSPIC33EP256MC202-I/SO
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$3.48 / 个
查看数据手册 →DSPIC33EP64MC202-I/SO
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$0.13 / 个
查看数据手册 →DSPIC33EP128GP502-H/SO
✅ 直接替换✓ 有现货
$3.36 / 个
查看数据手册 →DSPIC33EP128MC202T-I/SO 最大额定值与电气特性
| Core Architecture | 16-bit dsPIC DSC |
| Core Performance | 70 MIPS |
| Program Memory (FLASH) | 128KB (43K x 24) |
| RAM | 16KB |
| Product Family | dsPIC 33EP (Motor Control sub-family) |
| 封装 | 28-SOIC |
| 工作温度范围 | -40C to +85C (Industrial, I suffix) |
| 安装类型 | Surface Mount |
| Packaging Option | Tape & Reel (T suffix) |
| Debug Features | 2 program and 2 complex data breakpoints, JTAG (IEEE 1149.2 compatible) boundary scan, trace and run-time watch |
| Programming | In-Circuit and In-Application Programming |
| Target Application | Precision motor control (BLDC, PMSM, stepper) |
| RoHS 状态 | Compliant |
| 引脚数量 | 28 |
DSPIC33EP128MC202T-I/SO 28-soic 引脚配置指南
DSPIC33EP128MC202T-I/SO（28-soic 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： DSPIC33EP128MC202T-I/SO.
请参阅 数据手册 以查看完整引脚配置。
典型应用
DSPIC33EP128MC202T-I/SO 适用于 6 应用s: Brushless DC (BLDC) Motor Control, Digital Power Conversion (PFC / LLC), Industrial Automation and Servo Drives, Permanent Magnet Synchronous Motor (PMSM) Drives, Embedded Sensing and DSP Signal Conditioning, Stepper Motor Control.
Brushless DC (BLDC) Motor Control
The DSPIC33EP128MC202T-I/SO is purpose-built for BLDC motor control: its 70 MIPS dsPIC33E core and DSP engine execute field-oriented control (FOC) loops with single-cycle MAC operations, while the MC sub-family provides complementary PWM outputs for three-phase inverter bridges and quadrature encoder interface inputs for rotor position feedback. A typical design runs a current loop at 20-50 kHz and a speed loop at 1-2 kHz, well within the 70 MIPS headroom. The 128KB FLASH accommodates sensorless observer algorithms plus communication stacks. Compared with a general-purpose MCU, the integrated DSP math eliminates software multiply bottlenecks, enabling quieter, more energy-efficient motor operation as Microchip documents for the dsPIC33E family.
推荐
Digital Power Conversion (PFC / LLC)
In digital power supplies - power factor correction stages and LLC resonant converters - the DSPIC33EP128MC202T-I/SO replaces analog control loops with firmware flexibility. The 70 MIPS core samples voltage and current feedback via the high-speed ADC and updates complementary PWM duty cycles at switching frequencies from 100 kHz to several hundred kHz; the DSP engine's single-cycle MAC accelerates PI/PID compensation math for each switching period. The MC family's fault-pair PWM outputs support cycle-by-cycle current limiting essential for power-stage protection. With 128KB FLASH, designers store multiple converter profiles (constant-voltage, constant-current) in one device, and the industrial -40C to +85C rating covers enclosed power supply environments.
推荐
Industrial Automation and Servo Drives
Factory automation drives, conveyors, and robotic joints benefit from the DSPIC33EP128MC202T-I/SO's combination of motor-control peripherals and 70 MIPS signal-processing bandwidth. The quadrature encoder interface decodes incremental encoder feedback for closed-loop positioning, while the JTAG boundary-scan capability (IEEE 1149.2 compatible) supports production test in automated assembly lines. In-circuit and in-application programming allow firmware updates in installed equipment without disassembly, reducing maintenance cost. The 28-SOIC package suits compact driver boards, and the industrial temperature range of -40C to +85C covers unconditioned control cabinets. The DSP engine handles vibration signature analysis and adaptive tuning algorithms concurrently with the motion control loop.
推荐
Permanent Magnet Synchronous Motor (PMSM) Drives
PMSM drives demand precise rotor-angle estimation and fast current control, both strengths of the DSPIC33EP128MC202T-I/SO. Microchip positions the dsPIC33E MC family specifically for permanent magnet motor control that is 'more energy efficient, quieter in operation' with 'great range and extended life.' The 70 MIPS core executes Clarke/Park transformations and space-vector PWM modulation each switching cycle, and the 16KB RAM holds sensorless observer state variables plus filter buffers without external memory. The 28-SOIC footprint is significantly smaller than higher-pin-count DSCs, fitting e-bike, pump, and fan drive boards where PCB area is constrained while retaining full three-phase control capability.
推荐
Embedded Sensing and DSP Signal Conditioning
Beyond motor control, the 128MC202's DSP engine makes it a compact signal-conditioning controller: the single-cycle MAC performs FIR/IIR filtering, FFT-based spectrum analysis, and demodulation on sensor data streamed from the ADC. Typical uses include power-metering front ends, vibration monitors, and acoustic sensors where a 28-pin device must both acquire and process data locally. The 128KB FLASH stores coefficient tables and calibration data, while 16KB RAM buffers sampled waveforms. JTAG boundary scan and run-time watch support integration into larger IEEE 1149.2 test chains. The industrial -40C to +85C rating permits deployment in outdoor meters and mobile equipment where consumer-grade parts would drift or fail.
推荐
Stepper Motor Control
The DSPIC33EP128MC202T-I/SO generates microstepping profiles for two-phase stepper motors using its complementary PWM outputs with programmable dead time, achieving smooth current sinusoids that reduce audible noise and resonance. The 70 MIPS core computes sine/cosine tables in real time - the DSP MAC accelerates these calculations - while 128KB FLASH holds acceleration ramp profiles and position sequencing logic for multi-axis coordination. The quadrature encoder interface closes the loop in stepper-servo hybrid systems, detecting lost steps that plague open-loop designs. The 28-SOIC package integrates into compact printer, CNC, and lab-instrument boards, and in-application programming supports firmware-tuned motion profiles after installation in the end product.
推荐
推荐产品汇总
工程参考数据： DSPIC33EP128MC202T-I/SO ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | DSPIC33EP128MC202T-E/SO | DSPIC33EP128MC202-I/SO | DSPIC33EP256MC202-I/SO | DSPIC33EP64MC202-I/SO | DSPIC33EP128GP502-H/SO |
|---|---|---|---|---|---|---|
| Package | 28-SOIC | 28-SOIC - same | 28-SOIC - same | 28-SOIC - same | 28-SOIC - same | 28-SOIC - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Performance | 70 MIPS | 60 MIPS (per Microchip USA listing) | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS |
| FLASH Memory | 128KB (43K x 24) | 128KB (43K x 24) | 128KB (43K x 24) | 256KB (86K x 24) | 64KB (22K x 24) | 128KB |
| RAM | 16KB | 8KB (per Microchip USA listing) | 16KB | 27KB | 8KB | 16KB |
| Peripheral Family | Motor Control (MC) | Motor Control (MC) | Motor Control (MC) | Motor Control (MC) | Motor Control (MC) | General Purpose (GP) |
关键差异点
- Extended-temperature AEC-Q100 option in identical footprint （对比 DSPIC33EP128MC202T-E/SO)
- Balanced memory density （对比 DSPIC33EP256MC202-I/SO)
- Full motor-control peripheral set （对比 DSPIC33EP128GP502-H/SO)
设计说明
The 28-SOIC footprint of the DSPIC33EP128MC202T-I/SO is shared across the entire dsPIC33EP 202 family (64/128/256KB FLASH and I/E temperature grades), so define your land pattern once and qualify multiple memory/temperature SKUs on the same PCB. Place a 0.1uF ceramic decoupling capacitor directly across VDD/VSS pins with a short, low-inductance return path, and add a bulk 4.7-10uF capacitor near the supply entry. Keep the PGEC/PGED programming pins on an accessible header for in-circuit debugging and in-application programming.
Verify the temperature suffix before release: the -I grade is rated to +85C while the -E grade (DSPIC33EP128MC202T-E/SO) extends to +125C with AEC-Q100 qualification. Note that distributor listings for E-grade variants cite 60 MIPS operation and 8KB RAM, so confirm the speed/RAM configuration in the current datasheet revision for any non-default SKU before assuming parity with the -I part. Also remember the T suffix denotes tape-and-reel packaging only - electrical parameters are unchanged from the cut-tape version.
For motor-control PWM signals leaving the 28-SOIC package, route the complementary output pairs with matched trace lengths to the gate drivers to minimize dead-time asymmetry and shoot-through risk in the inverter bridge. The JTAG (IEEE 1149.2) TMS/TCK/TDI/TDO pins double as general I/O in some configurations; if boundary scan is required at production test, reserve these pins with test-point access and series resistors per Microchip's programming specification guidance.
Estimated: the dsPIC33EP core draws on the order of tens of mA at 70 MIPS from a nominal 3.3V rail (exact current per the datasheet DC characteristics table), so budget approximately 100-150 mW for the controller itself, plus gate-drive power for the MOSFET bridge. Use a local LDO or buck converter rated at least 2x the measured peak current, and sequence power so VDD rises monotonically - brown-out detection should be enabled in configuration words to prevent corrupted FLASH writes during supply dips.
合规信息
RoHS compliance stated by distributor (veswin) for the DSPIC33EP128MC202T-I/SO. AEC-Q100 status: the -I industrial part is not automotive qualified; the -E variant is listed as AEC-Q100 qualified by Microchip USA. Reach/halogen status not found in provided data.
