DSPIC33EP256MC504-E/ML - 16-bit DSC 256KB Flash 60MHz | Microchip
料号： DSPIC33EP256MC504-E/ML ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
DSPIC33EP256MC504-E/ML 概述
A digital signal controller combines the computational architecture of a microcontroller with the DSP engine of a digital signal processor. Within the power-management hierarchy, a DSC such as the dsPIC33EP256MC504 serves as the system-level control IC that executes closed-loop control algorithms for motors, power converters, and sensing systems, sitting above discrete analog control ICs and alongside general-purpose 16-bit microcontrollers.
Key features include the 70 MIPS dsPIC DSC core with integrated DSP multiply-accumulate instructions, high-speed PWM peripherals tailored for precision motor control, on-chip operational amplifiers, and rich connectivity including CAN, I2C, SPI, UART/USART, IrDA, LINbus, and Quadrature Encoder Interface (QEI). The 256 KB Flash is organized as 85.5K x 24-bit instruction words, giving generous code headroom for field-updatable control firmware.
Technically, the dsPIC33EP core pairs a 16-bit MCU pipeline with a dedicated DSP multiply-accumulator, allowing fixed-point filtering (FIR, PID, Clarke/Park transforms) to run alongside general control code without a second processor. The motor-control PWM module supports complementary outputs, dead-time insertion, and fault inputs, which are essential for brushless DC, permanent-magnet synchronous, and stepper motor drives.
Typical applications include precision brushless DC and PMSM motor drives, digital power supplies and power factor correction converters, and industrial automation sensors requiring CAN connectivity. The integrated op-amps reduce external component count in current-sense front ends.
Design consideration: the extended-temperature E-grade part must still respect the package power dissipation limits; provide adequate PCB copper under the exposed pad for thermal relief at high clock rates.
This page synthesizes distributor data, datasheet references, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
直接替换替代料： DSPIC33EP256MC504-E/ML ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： DSPIC33EP256MC504-E/ML （相同外形与封装尺寸） ——差异在于 Package, Operating Temperature, Supply Voltage, RAM, Core.
快速对比工具——选择替代料号进行并排对比：
DSPIC33EP256MC504-H/ML
✅ 直接替换✓ 有现货
$3.98 / 个
查看数据手册 →DSPIC33EP256MC504-I/ML
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
DSPIC33EP128MC504-I/ML
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
DSPIC33EP64MC504-I/ML
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$3.25 / 个
查看数据手册 →DSPIC33EP256GM604-E/ML
✅ 直接替换✓ 有现货
$6.55 / 个
查看数据手册 →DSPIC33EP256MC504-E/ML 最大额定值与电气特性
| Core Architecture | 16-bit dsPIC DSC core |
| Core Performance | 70 MIPS (dsPIC33E family) |
| Operating Frequency | 60 MHz |
| Program Memory (Flash) | 256 KB (85.5K x 24) |
| RAM | 32 KB |
| 封装 | QFN-EP-44 (44-pin QFN with exposed pad) |
| 工作温度 | -40C to +125C (extended, E grade) |
| Connectivity | CAN, I2C, SPI, UART/USART, IrDA, LINbus, QEI |
| Analog Peripherals | On-chip operational amplifiers, ADC |
| PWM | High-speed PWM for motor control |
| Product Family | dsPIC33EP (MC - Motor Control family) |
| 安装类型 | Surface Mount |
| Typical Applications | Precision motor control, digital power |
| 数据总线宽度 | 16 bit |
| RoHS 状态 | unknown |
DSPIC33EP256MC504-E/ML qfn-ep-44 (44-pin qfn with exposed pad) 引脚配置指南
DSPIC33EP256MC504-E/ML（qfn-ep-44 (44-pin qfn with exposed pad) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： DSPIC33EP256MC504-E/ML.
请参阅 数据手册 以查看完整引脚配置。
典型应用
DSPIC33EP256MC504-E/ML 适用于 6 应用s: Brushless DC (BLDC) Motor Drives, Digital Power Supplies and PFC, Industrial Automation and CAN Networking Nodes, PMSM Servo Drives and Robotics, Battery-Managed Power Tools and E-Mobility, Solar Micro-Inverters and MPPT Converters.
Brushless DC (BLDC) Motor Drives
The DSPIC33EP256MC504-E/ML fits BLDC motor control because its MC-family peripherals were designed for this exact task: high-speed PWM with complementary outputs, programmable dead-time insertion, and fault inputs protect the power stage, while the 70 MIPS DSP core executes Clarke/Park transforms and field-oriented control (FOC) loops at 20 kHz+ PWM rates with ample cycle margin. The on-chip op-amps condition low-side shunt current signals without external amplifiers, and the Quadrature Encoder Interface reads position feedback directly. In a typical sensorless FOC design, the DSC sits between the gate driver and the current-sense resistors, closing current and speed loops in firmware. The trade-off versus a dedicated ASIC is development effort, but firmware flexibility across motor families is a major benefit.
推荐
Digital Power Supplies and PFC
The DSPIC33EP256MC504-E/ML suits digital power conversion because its 70 MIPS DSP core and high-speed PWM support voltage-mode or current-mode control of LLC, buck, boost, and power-factor-correction stages. The PWM resolution and dead-time control allow precise switching edge placement for peak-efficiency tuning, while the ADC samples input/output voltages and inductor currents synchronously with the PWM carrier to minimize control-loop delay. The 256 KB Flash holds multiple converter firmware profiles, enabling one controller across product variants, and the CAN bus supports digital telemetry in telecom rectifiers. Compared to analog control ICs, the DSC adds nonlinearity compensation and adaptive gains; the cost is firmware development and the need to budget loop latency in the compensation design.
推荐
Industrial Automation and CAN Networking Nodes
The DSPIC33EP256MC504-E/ML integrates a CAN module alongside I2C, SPI, UART, IrDA, and LINbus, making it a compact single-chip node for industrial automation networks. A typical deployment uses CAN for the plant-level fieldbus while SPI/I2C connect local sensors and actuators; the 70 MIPS core runs the protocol stack plus control logic concurrently, and 256 KB Flash leaves headroom for OTA-style field firmware updates. The QEI interface directly reads incremental encoder feedback on positioning axes. In factory automation cells, this DSC can serve as an axis controller, sensor hub, or gateway between LIN-based sub-networks and the CAN backbone. The extended -40C to +125C E-grade rating covers harsh cabinet environments near drives and heaters where industrial-grade (+85C) parts fall short.
推荐
PMSM Servo Drives and Robotics
Permanent-magnet synchronous motor servo drives benefit directly from the DSPIC33EP256MC504-E/ML architecture: the DSP multiply-accumulate engine computes FOC current loops fast enough for high-bandwidth torque control, the QEI decodes encoder position, and the high-speed PWM stage drives three-phase inverters with deterministic dead time. The 70 MIPS core sustains nested current, velocity, and position loops at kilohertz rates typical of robotic joints. On-chip op-amps amplify shunt currents, trimming BOM cost versus external analog front ends, while the 32 KB RAM supports state logging and trajectory buffering. The extended temperature grade suits joints near friction heat sources. The trade-off against dedicated servo ASICs is tuning effort; the benefit is fully customizable commutation, safety behavior, and field-update capability across a robot product line.
推荐
Battery-Managed Power Tools and E-Mobility
Cordless power tools and light e-mobility platforms use the DSPIC33EP256MC504-E/ML as the central controller for both traction motor drive and basic battery supervision. The DSC's PWM and ADC resources drive the BLDC motor under field-oriented control while firmware monitors pack voltage and current through the same ADC channels, enabling torque limiting as the battery depletes. The 256 KB Flash accommodates protection state machines, communication (LIN or UART to a tool trigger/display), and feature variants shipped from one PCB. The -40C to +125C E-grade rating is essential because controller boards in power tools sit near motor windings that exceed +85C during stall events. Integrated op-amps reduce the current-sense front-end cost, an important factor in consumer price-sensitive products.
推荐
Solar Micro-Inverters and MPPT Converters
The DSPIC33EP256MC504-E/ML performs maximum-power-point tracking and grid-tie inverter control in solar conversion stages. Its 70 MIPS core runs MPPT algorithms (perturb-and-observe or incremental conductance) while simultaneously synthesizing the PWM waveforms for the DC-DC boost and DC-AC stages, using ADC channels triggered synchronously with PWM to sample panel voltage/current and grid feedback. The 256 KB Flash supports anti-islanding firmware, communication, and certification-driven feature sets on one device. The high-speed PWM with fine dead-time control minimizes switching losses that dominate micro-inverter efficiency. Extended temperature qualification addresses rooftop enclosures exceeding +85C. Compared to a two-chip analog-plus-MCU split, the single DSC removes inter-chip control latency and cuts BOM count in the power-dense micro-inverter format.
推荐
推荐产品汇总
工程参考数据： DSPIC33EP256MC504-E/ML ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | DSPIC33EP256MC504-H/ML | DSPIC33EP128MC504-I/ML | DSPIC33EP256GM604-E/ML |
|---|---|---|---|---|
| Package | QFN-EP-44 | QFN-EP-44 - same | QFN-EP-44 - same | QFN-EP-44 - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 256 KB | 256 KB | 128 KB | 256 KB |
| RAM | 32 KB | 32 KB | 16 KB | 32 KB |
| Core / MIPS | dsPIC33EP, 70 MIPS | dsPIC33EP, 70 MIPS | dsPIC33EP, 70 MIPS | dsPIC33EP GM series, 70 MIPS |
| Temperature Range | -40C to +125C (E grade) | -40C to +85C (H grade) | -40C to +85C (I grade) | -40C to +125C (E grade) |
| CAN Bus | Yes | Yes | Yes | Yes |
| Software Compatibility | Baseline (MC50X MC family) | 100% - same silicon | 100% - reduced Flash only | Partial - GM peripheral set differs |
关键差异点
- Extended -40C to +125C temperature rating （对比 DSPIC33EP256MC504-H/ML)
- Motor-control peripheral set (MC family) （对比 DSPIC33EP128GP504-I/ML)
- 256 KB Flash with full code headroom （对比 DSPIC33EP128MC504-I/ML)
设计说明
Estimated: the dsPIC33EP core draws in the tens-of-mA range at 60 MHz operation, so a 3.3V LDO rated at 250-500 mA (e.g., a small SOT-223 or DFN regulator) provides comfortable headroom for core plus I/O current. Decouple each VDD pin pair with 0.1 uF ceramic capacitors placed within 2 mm of the pins, plus one bulk 10 uF per rail. Use a single solid ground plane under the QFN exposed pad and stitch it to the PCB ground with an array of vias for both thermal and EMC performance.
The QFN-EP-44 exposed pad is the primary thermal and ground path. Estimating thermal performance: with the exposed pad well soldered to a 2x2 via array into a ground pour, junction-to-ambient resistance drops substantially versus a pad-less layout - critical when operating in the +85C to +125C ambient envelope that the E grade permits. Do not leave the exposed pad floating or connected only through solder-mask-defined geometry. Follow Microchip's family datasheet layout guidelines for crystal placement and keep the high-speed PWM traces short, with series gate resistors near the DSC when driving long motor-stage cables.
Two pitfalls recur with this family. First, the temperature suffix matters: -H/ML, -I/ML and -E/ML share the same footprint but different maximum ambient ratings - substituting an H or I grade in a +105C enclosure will violate its ratings even though it fits the land pattern. Second, configuration bits (FOSC, watchdog, PWM pin mapping) live in Flash on dsPIC33EP devices; a code-only replacement of a memory-smaller sibling (e.g., 128 KB variant) will run unmodified, but switching to a GM-series pin-compatible part requires reviewing the peripheral register map. Always re-verify config word settings after any part-number change.
合规信息
Compliance status was not captured in the verified web data. Microchip general-purpose parts are typically RoHS compliant; confirm on the Microchip product page or datasheet before procurement.
