Silicon Labs

EFM32TG108F32-D-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs

料号: EFM32TG108F32-D-QFN24 ✓ 量产中
1.98 V to 3.8 V Vdss 24-QFN (5 x 5 mm) Package 32 MHz Speed 32 kB Memory
最小起订量: 1 |

EFM32TG108F32-D-QFN24 概述

Silicon Labs EFM32TG108F32-D-QFN24 is a low-power, 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 32 kB Flash memory, 4 kB RAM, 17 digital I/O pins, and two 16-bit timers in a 24-QFN 5 x 5 mm package. The device is designed for energy-sensitive embedded systems that require efficient processing, compact implementation, and low-power operating modes.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The EFM32 Tiny Gecko MCU belongs to the hierarchy of embedded processors, microcontrollers, 32-bit ARM Cortex-M devices, and energy-efficient system-on-chip products. It combines real-time control capability with a compact package suitable for battery-operated and space-constrained products.

Key specifications include a 32 MHz ARM Cortex-M3 core, 32 kB of Flash program memory, and 4 kB of RAM. The device provides 17 digital I/O pins and two 16-bit timers for sensor sampling, control-loop timing, pulse measurement, and general-purpose embedded tasks. Its specified operating supply range is 1.98 V to 3.8 V, supporting common low-voltage embedded systems.

The Tiny Gecko platform emphasizes energy-efficient operation through low-power techniques, fast wake-up behavior, and energy-saving modes. These characteristics allow the processor to remain in a reduced-power state between short processing intervals while still responding quickly to external activity. The 24-QFN package also exposes the device in a compact surface-mount form factor suitable for densely populated control boards.

Typical uses include battery-powered sensor nodes, industrial condition-monitoring equipment, compact energy meters, portable medical accessories, and IoT devices. The 17 I/O pins support external sensors and actuators, while the two 16-bit timers provide dedicated timing resources for periodic measurements and motor or control signals.

PCB design should preserve clean supply decoupling, thermal copper, and clear access to programming and debug signals. Confirm the complete pin description and exposed-pad connection in the manufacturer pinout table before layout release, and validate the firmware, clock configuration, and low-power wake-up sequence on the final board.

This page combines manufacturer specifications, package and memory details, application-oriented engineering guidance, and same-package replacement information to help engineers evaluate the EFM32TG108F32-D-QFN24 for low-power embedded designs.

直接替换替代料: EFM32TG108F32-D-QFN24 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: EFM32TG108F32-D-QFN24 (相同外形与封装尺寸) ——差异在于 Flash Memory, Package, Timers, Digital I/O Pins, RAM.

Silicon Labs
Flash Memory: 32 kB (32K x 8)
Timers: 2 x 16-bit
Digital I/O Pins: 17
对比 EFM32TG108F32-D-QFN24 →
Silicon Labs
Flash Memory: 4 KB
Package: 24-QFN, 5x5 mm
Digital I/O Pins: 17
对比 EFM32TG108F32-D-QFN24 →
Silicon Labs
Flash Memory: 8 kB (8K x 8)
Package: 24-QFN, 5x5 mm
RAM: 2 kB
对比 EFM32TG108F32-D-QFN24 →
Silicon Labs
Flash Memory: 32 KB (32K × 8)
Package: 24-QFN (5 mm × 5 mm)
Timers: 2 × 16-bit
对比 EFM32TG108F32-D-QFN24 →

EFM32TG108F32-QFN24

✅ 直接替换
Silicon Labs
📦 24-QFN (5x5)
ARM Cortex-M3 · 32 MHz · 32 kB (32K x 8) · 4 kB · 17 · 2 x 16-bit · 1.98 V to 3.8 V · 24-QFN (5x5 mm) Exposed Pad

联系询价

查看数据手册 →

EFM32TG108F32-QFN24R

✅ 直接替换
📦 24-QFN (5x5)
Same 32 MHz Cortex-M3, 32 kB Flash, and 4 kB RAM electrical configuration; reel-code suffix differs by 0% in listed core specifications

📋 参考替代料(不在目录中)

EFM32TG108F32-QFN24T

✅ 直接替换
Silicon Labs
📦 24-QFN (5x5)
兼容规格

联系询价

查看数据手册 →

EFM32ZG108F32-QFN24

✅ 直接替换
Silicon Labs
📦 24-QFN (5x5)
32-bit ARM Cortex-M0+ microcontroller (MCU) · EFM32 Zero Gecko · ARM Cortex-M0+ · 24 MHz · 32 KB (32K × 8) · 4 KB · 17 · 2 × 16-bit

联系询价

查看数据手册 →

EFM32HG108F32G-C-QFN24

✅ 直接替换
📦 24-QFN (5x5)
Same manufacturer and 24-QFN package family; detailed CPU, memory, and peripheral differences require comparison against the EFM32TG108 datasheet

📋 参考替代料(不在目录中)

EFM32TG108F32-D-QFN24 最大额定值与电气特性

Product Type 32-bit ARM Cortex-M3 microcontroller
CPU Core ARM Cortex-M3
Maximum CPU Frequency 32 MHz
Flash Memory 32 kB
RAM 4 kB
Digital I/O Pins 17 pins
Timers 2 x 16-bit timers
Supply Voltage Range 1.98 V to 3.8 V
Architecture ARM 32-bit RISC
封装 24-QFN (5 x 5 mm)
安装类型 Surface mount

EFM32TG108F32-D-QFN24 24-qfn (5 x 5 mm) 引脚配置指南

EFM32TG108F32-D-QFN24(24-qfn (5 x 5 mm) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

EFM32TG108F32-D-QFN24 的 24-qfn (5 x 5 mm) 封装引脚图

暂无详细引脚数据: EFM32TG108F32-D-QFN24.

请参阅 数据手册 以查看完整引脚配置。

典型应用

EFM32TG108F32-D-QFN24 适用于 6 应用s: Battery-Powered Sensor Nodes, Industrial Condition Monitoring, Smart Energy Meters, Portable Health and Wearable Devices, IoT Control and Monitoring, Compact Access and Security Panels.

🧩

Battery-Powered Sensor Nodes

The EFM32TG108F32-D-QFN24 fits compact battery-powered sensor nodes because its Tiny Gecko platform combines a 32 MHz Cortex-M3 core with energy-saving modes and fast wake-up behavior. The 32 kB Flash can hold application firmware, while 4 kB RAM supports short-lived sampling and control buffers. Two 16-bit timers provide predictable intervals for sensor polling, timeout handling, and low-rate actuator updates. A design can remain in a reduced-power state between measurements, wake for a short processing interval, and return to sleep. Actual battery life depends on sensor duty cycle, wake frequency, and board leakage.

🏭

Industrial Condition Monitoring

The EFM32TG108F32-D-QFN24 is appropriate for compact condition-monitoring controllers that collect periodic sensor information and perform local control. Seventeen digital I/O pins provide connections for digital sensors, alarm inputs, and status indicators, while two 16-bit timers support measurement intervals and pulse-related tasks. Its 1.98 V to 3.8 V supply range permits integration into low-voltage industrial electronics. The compact 24-QFN 5 x 5 mm package helps reduce board area, although the finished product must be checked against the required temperature range and environmental qualification level.

⚡

Smart Energy Meters

The EFM32TG108F32-D-QFN24 can serve as the control processor in a compact smart energy meter that periodically acquires measurements and updates local indicators or communications. Its 32 MHz Cortex-M3 core provides more processing headroom than a 24 MHz Cortex-M0+ configuration, while the two 16-bit timers are useful for sampling intervals and pulse accumulation. The 17 available digital I/O pins support digital meter inputs and outputs. Board-level accuracy of current or voltage measurements still depends on external sensing circuitry, calibration, and the metrology requirements of the finished instrument.

💊

Portable Health and Wearable Devices

The EFM32TG108F32-D-QFN24 supports compact wearable and portable health accessories where space, energy use, and processing demand must be balanced. The 24-QFN 5 x 5 mm package reduces occupied board area, while fast wake-up and energy-saving modes help the system remain inactive between user interactions or sensor events. Seventeen digital I/O pins can connect to simple sensors, buttons, and status indicators. Product development must validate the medical classification, applicable safety requirements, battery protection, and all peripheral specifications independently of the MCU selection.

🌐

IoT Control and Monitoring

The EFM32TG108F32-D-QFN24 is well matched to IoT control products that wake periodically to collect sensor information, evaluate thresholds, and update an actuator or communications module. Its 32 kB Flash supports a compact control application, and 4 kB RAM is sufficient for moderate working sets and protocol buffers. Two 16-bit timers can divide system time among acquisition, communication, and maintenance tasks. The MCU's low-power architecture is useful when the radio or other high-load subsystem is enabled only intermittently, although radio specifications and antenna design remain separate system-level considerations.

🎥

Compact Access and Security Panels

The EFM32TG108F32-D-QFN24 can act as the central controller in a compact access panel, alarm controller, or security accessory. Seventeen digital I/O pins are useful for key switches, indicator outputs, alarm inputs, and external interlocks, while two 16-bit timers handle timing functions and periodic maintenance tasks. The Cortex-M3 core provides 32 MHz processing performance for event handling, and the small 24-QFN package supports space-constrained enclosures. Deployment in security equipment requires careful validation of the final board, interface behavior, tamper response, and applicable product regulations.

推荐产品汇总

EFM32ZG108F32-QFN24 Silicon Labs 用于: Battery-Powered Sensor Nodes, Smart Energy Meters, IoT Control and Monitoring EFM32TG108F32-QFN24 Silicon Labs 用于: Battery-Powered Sensor Nodes, Smart Energy Meters, Compact Access and Security Panels EFM32TG108F32-QFN24R Equivalent EFM32TG108 ordering option 用于: Industrial Condition Monitoring, Portable Health and Wearable Devices, Compact Access and Security Panels EFM32TG108F32-QFN24T Silicon Labs 用于: Industrial Condition Monitoring, Portable Health and Wearable Devices EFM32HG108F32G-C-QFN24 Same-package Silicon Labs comparison candidate 用于: IoT Control and Monitoring
What is the EFM32TG108F32-D-QFN24?
The EFM32TG108F32-D-QFN24 is a low-power, 32-bit ARM Cortex-M3 microcontroller from Silicon Labs. It operates up to 32 MHz and includes 32 kB of Flash memory, 4 kB of RAM, 17 digital I/O pins, and two 16-bit timers. According to the Silicon Labs product page, the device is housed in a 24-QFN package measuring 5 x 5 mm and is intended for energy-sensitive embedded applications.
What are the key specifications of EFM32TG108F32-D-QFN24 that engineers should know?
The principal EFM32TG108F32-D-QFN24 specifications are a 32 MHz ARM Cortex-M3 core, 32 kB Flash, 4 kB RAM, 17 digital I/O pins, two 16-bit timers, and a 1.98 V to 3.8 V supply range. Silicon Labs also identifies fast wake-up behavior and energy-saving modes as core platform features. The compact 24-QFN 5 x 5 mm package makes the device suitable for small, low-power embedded control assemblies.
What is the operating voltage of EFM32TG108F32-D-QFN24?
The EFM32TG108F32-D-QFN24 operates from 1.98 V to 3.8 V. This range is stated in the manufacturer technical information for the exact 24-QFN device. The MCU therefore supports both lower-voltage 2 V-class systems and conventional 3.3 V embedded rails, subject to the detailed limits for each operating mode and the requirements of attached peripherals.
Where can I download the EFM32TG108F32-D-QFN24 datasheet PDF?
The manufacturer datasheet is accessible through the Silicon Labs EFM32TG108 documentation, including the PDF linked by the Keil documentation repository. The manufacturer product page provides the canonical device entry and supporting documentation for EFM32TG108F32-QFN24. Use the pin-description table and electrical-characteristics sections to confirm package connections, supply limits, clock requirements, and exposed-pad treatment before releasing a PCB layout.
Where can I find the EFM32TG108F32-D-QFN24 pinout?
The EFM32TG108F32-D-QFN24 pinout is defined in the pin-description table of the manufacturer EFM32TG108 datasheet. The device uses a 24-QFN 5 x 5 mm package with an exposed pad, so the package drawing and land-pattern requirements should be consulted alongside the numbered pin table. Assign signals only after checking power, ground, reset, programming, debug, and exposed-pad connections against the exact device ordering code.
Is EFM32TG108F32-D-QFN24 suitable for battery-powered IoT sensor nodes?
Yes, the EFM32TG108F32-D-QFN24 is suitable for battery-powered IoT sensor nodes. Silicon Labs describes the Tiny Gecko platform around energy-saving modes, fast wake-up times, and low-power techniques. Its 32 MHz Cortex-M3 core provides useful processing capacity, while 17 digital I/O pins and two 16-bit timers support sensors and periodic control tasks. Actual battery life depends on the duty cycle, wake-up rate, radio load, and board leakage.
What can replace the EFM32TG108F32-D-QFN24?
The closest documented replacements are EFM32TG108F32-QFN24, EFM32TG108F32-QFN24R, and EFM32TG108F32-QFN24T because they belong to the same EFM32TG108 configuration and use the same 24-QFN package. EFM32ZG108F32-QFN24 offers the same package and memory configuration but reduces maximum CPU speed from 32 MHz to 24 MHz. Firmware, peripheral mapping, qualification, and exposed-pad requirements must be reviewed before substitution.
Is EFM32TG108F32-D-QFN24 the same as EFM32ZG108F32-QFN24?
No, they are related but not electrically identical. Both are 24-QFN 5 x 5 mm microcontroller options with 32 kB Flash, 4 kB RAM, 17 digital I/O pins, and two 16-bit timers according to the manufacturer descriptions. EFM32TG108F32-D-QFN24 runs up to 32 MHz with an ARM Cortex-M3 core, while EFM32ZG108F32-QFN24 runs up to 24 MHz with an ARM Cortex-M0+ core.
EFM32TG108F32-D-QFN24 vs EFM32ZG108F32-QFN24 - which is better for low-power control?
Choose EFM32TG108F32-D-QFN24 when the design benefits from its faster 32 MHz Cortex-M3 core; choose EFM32ZG108F32-QFN24 when a 24 MHz Cortex-M0+ configuration is sufficient. Both provide 32 kB Flash, 4 kB RAM, 17 I/O pins, two 16-bit timers, and a 24-QFN 5 x 5 mm package. The TG108 offers 33% more maximum clock rate, while final power consumption must be compared under the intended workload and duty cycle.
When should I choose EFM32TG108F32-D-QFN24 over another 24-QFN microcontroller?
Choose EFM32TG108F32-D-QFN24 when the design requires a 32 MHz ARM Cortex-M3 core, 32 kB Flash, 4 kB RAM, and access to the Tiny Gecko low-power feature set in a 24-QFN 5 x 5 mm footprint. It is particularly suitable for compact control products that periodically sleep, wake quickly, and process sensor or actuator data. Choose a lower-speed Cortex-M0+ option only when its performance and software ecosystem meet the application requirements.
Is EFM32TG108F32-D-QFN24 suitable for industrial monitoring equipment?
Yes, the EFM32TG108F32-D-QFN24 can support compact industrial monitoring equipment when the product's environmental, qualification, and operating-temperature requirements are met. Its two 16-bit timers are useful for periodic measurements, while 17 digital I/O pins can interface with sensors and control signals. The 1.98 V to 3.8 V supply range supports low-voltage embedded designs, although industrial robustness must be confirmed from the complete device specifications.
How much power does the EFM32TG108F32-D-QFN24 consume?
The EFM32TG108F32-D-QFN24 is designed for low-power operation, but a single current value cannot be assigned to every operating condition. Consumption varies with the active clock, enabled peripherals, operating mode, flash activity, and time spent asleep. According to the Silicon Labs platform description, the device combines energy-saving modes with fast wake-up behavior. Use the manufacturer power-characteristics tables and measure the completed board under the intended duty cycle.
Where to buy EFM32TG108F32-D-QFN24 online?
Use the Request a Quote form on this page to request the EFM32TG108F32-D-QFN24, current availability, lead time, and order quantity. The exact ordering code includes the QFN24 package and device-grade suffix, so confirm that the requested line matches EFM32TG108F32-D-QFN24 rather than a related reel, temperature, or grade code. The form is the appropriate channel for a current commercial quotation.
What is the price of EFM32TG108F32-D-QFN24?
Current pricing for EFM32TG108F32-D-QFN24 is obtained through the Request a Quote form on this page. The form supports an exact-order-code inquiry and provides the current commercial response instead of a potentially stale static price. Include required quantities, delivery location, and packaging preferences so the quotation can be matched to the intended production and prototyping requirements.
What is the lead time for EFM32TG108F32-D-QFN24?
Submit EFM32TG108F32-D-QFN24 through the Request a Quote form to request the current lead time, stock position, and minimum order quantity. Lead time can vary with order volume, purchasing schedule, and current supply status. Supplying the target quantity and required delivery date with the request enables a more useful production planning response than a generic availability statement.
Is EFM32TG108F32-D-QFN24 in stock?
Request current EFM32TG108F32-D-QFN24 inventory through the Request a Quote form on this page. The form records the exact MPN and requested quantity so the availability response can apply to the correct 24-QFN device rather than a nearby package or ordering variant. For prototype scheduling, indicate the required delivery date; for production planning, provide your planned order horizon and annual usage.

工程参考数据: EFM32TG108F32-D-QFN24 ——对比、设计指导和合规信息。

选型指南

Choose EFM32TG108F32-D-QFN24 for compact embedded products that need a 32 MHz ARM Cortex-M3 core, 32 kB Flash, 4 kB RAM, 17 digital I/O pins, and two 16-bit timers in a 24-QFN 5 x 5 mm package. Its Tiny Gecko low-power architecture is particularly appropriate for battery-operated nodes, smart meters, monitoring controllers, and portable products that sleep between short active periods. Choose EFM32ZG108F32-QFN24 when its 24 MHz Cortex-M0+ core is sufficient and you want a lower-speed family option, while accepting reduced clock performance and potentially different software characteristics. Choose the EFM32TG108F32-QFN24, -R, or -T ordering options only after confirming the exact grade, temperature, and shipping suffix. EFM32HG108F32G-C-QFN24 may fit the same package family, but its detailed peripheral mapping and specifications must be compared before substitution. Every candidate still requires firmware, exposed-pad, decoupling, and PCB footprint verification.

与替代料对比

参数 本产品 EFM32TG108F32-QFN24 EFM32TG108F32-QFN24R EFM32TG108F32-QFN24T EFM32ZG108F32-QFN24 EFM32HG108F32G-C-QFN24
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 24-QFN (5x5) 24-QFN (5x5) 24-QFN (5x5) 24-QFN (5x5) 24-QFN (5x5) 24-QFN (5x5)

关键差异点

  • Higher maximum clock rate than the Cortex-M0+ alternative (对比 EFM32ZG108F32-QFN24)
  • Direct family configuration with unchanged listed performance (对比 EFM32TG108F32-QFN24)
  • Compact 24-QFN footprint for space-constrained products (对比 EFM32HG108F32G-C-QFN24)

设计说明

Use the manufacturer QFN24 land pattern and keep the exposed-pad connection consistent with the pin-description table. Place the supply bypass capacitors close to the associated power and ground pins, and provide a low-impedance ground reference beneath the device where the package guidance permits. Check the exact ordering code before release because ordering suffixes can encode device grade, temperature range, or shipping configuration.

Design the supply for the complete 1.98 V to 3.8 V device range and the voltage required by attached peripherals. Confirm regulator tolerance, startup behavior, and the maximum operating mode specified for the product. For battery-powered designs, estimate average consumption from active current, sleep current, wake frequency, and the duration of each processing interval. Use the manufacturer power tables for measurements rather than applying one current value to every operating state.

Do not treat a same-package alternative as a firmware-identical replacement without checking the peripheral map and startup behavior. EFM32ZG108F32-QFN24 uses a Cortex-M0+ core at up to 24 MHz rather than the target's Cortex-M3 at up to 32 MHz, while EFM32HG108F32G-C-QFN24 requires detailed comparison of its characteristics. Rebuild and test the application whenever the processor core, clock limit, pin function, or memory configuration changes.

Review the programming and debug signals, reset behavior, clock components, and exposed-pad layout in the manufacturer reference documentation before final routing. Keep sensitive timing or measurement routes away from noisy switching nodes and provide a clean return path for the MCU. If the board combines the MCU with radio, display, relay, or power-conversion circuitry, validate the complete power-up sequence rather than testing only the isolated controller.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

Compliance status was not established by the cited manufacturer product description or product-page excerpt.

相关搜索

EFM32TG108F32-D-QFN24 datasheet EFM32TG108F32-D-QFN24 pinout EFM32TG108F32-D-QFN24 datasheet pdf EFM32TG108F32-D-QFN24 equivalent EFM32TG108F32-D-QFN24 replacement EFM32TG108F32-D-QFN24 cross reference EFM32TG108F32-D-QFN24 footprint EFM32TG108F32-D-QFN24 schematic EFM32TG108F32-D-QFN24 price EFM32TG108F32-D-QFN24 stock Silicon Labs EFM32TG108F32-D-QFN24 EFM32TG108F32-D-QFN24 vs EFM32ZG108F32-QFN24 EFM32TG108F32-D-QFN24 32MHz 32kB Flash EFM32TG108 24-QFN low power MCU EFM32TG108F32-D-QFN24 programming

相关元器件 & 术语

Silicon Labs EFM32TG108F32-D-QFN24 EFM32TG108F32-QFN24 EFM32TG108F32-QFN24R EFM32TG108F32-QFN24T EFM32ZG108F32-QFN24 EFM32HG108F32G-C-QFN24 EFM32 Tiny Gecko ARM Cortex-M3 ARM Cortex-M0+ microcontroller embedded processor system-on-chip Flash memory RAM digital I/O 16-bit timer low-power mode fast wake-up battery-powered sensor node industrial condition monitoring smart energy meter IoT control 24-QFN package QFN package family surface-mount device
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情