EFM32TG108F32-D-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs
部品番号: EFM32TG108F32-D-QFN24 ✓ 生産中EFM32TG108F32-D-QFN24 概要
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The EFM32 Tiny Gecko MCU belongs to the hierarchy of embedded processors, microcontrollers, 32-bit ARM Cortex-M devices, and energy-efficient system-on-chip products. It combines real-time control capability with a compact package suitable for battery-operated and space-constrained products.
Key specifications include a 32 MHz ARM Cortex-M3 core, 32 kB of Flash program memory, and 4 kB of RAM. The device provides 17 digital I/O pins and two 16-bit timers for sensor sampling, control-loop timing, pulse measurement, and general-purpose embedded tasks. Its specified operating supply range is 1.98 V to 3.8 V, supporting common low-voltage embedded systems.
The Tiny Gecko platform emphasizes energy-efficient operation through low-power techniques, fast wake-up behavior, and energy-saving modes. These characteristics allow the processor to remain in a reduced-power state between short processing intervals while still responding quickly to external activity. The 24-QFN package also exposes the device in a compact surface-mount form factor suitable for densely populated control boards.
Typical uses include battery-powered sensor nodes, industrial condition-monitoring equipment, compact energy meters, portable medical accessories, and IoT devices. The 17 I/O pins support external sensors and actuators, while the two 16-bit timers provide dedicated timing resources for periodic measurements and motor or control signals.
PCB design should preserve clean supply decoupling, thermal copper, and clear access to programming and debug signals. Confirm the complete pin description and exposed-pad connection in the manufacturer pinout table before layout release, and validate the firmware, clock configuration, and low-power wake-up sequence on the final board.
This page combines manufacturer specifications, package and memory details, application-oriented engineering guidance, and same-package replacement information to help engineers evaluate the EFM32TG108F32-D-QFN24 for low-power embedded designs.
ドロップイン代替品: EFM32TG108F32-D-QFN24 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: EFM32TG108F32-D-QFN24 (同一形状・フットプリント) — 相違点: Flash Memory, Package, Timers, Digital I/O Pins, RAM.
EFM32TG108F32-QFN24
✅ ドロップイン価格はお問い合わせください
データシートを見る →EFM32TG108F32-QFN24R
✅ ドロップイン📋 参考代替品(カタログ未掲載)
EFM32ZG108F32-QFN24
✅ ドロップイン価格はお問い合わせください
データシートを見る →EFM32HG108F32G-C-QFN24
✅ ドロップイン📋 参考代替品(カタログ未掲載)
EFM32TG108F32-D-QFN24 最大定格&電気的特性
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| CPU Core | ARM Cortex-M3 |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 32 kB |
| RAM | 4 kB |
| Digital I/O Pins | 17 pins |
| Timers | 2 x 16-bit timers |
| Supply Voltage Range | 1.98 V to 3.8 V |
| Architecture | ARM 32-bit RISC |
| パッケージ | 24-QFN (5 x 5 mm) |
| 実装タイプ | Surface mount |
EFM32TG108F32-D-QFN24 24-qfn (5 x 5 mm) ピン配置ガイド
EFM32TG108F32-D-QFN24 (24-qfn (5 x 5 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: EFM32TG108F32-D-QFN24.
詳細は データシート をご参照ください。
主な用途
EFM32TG108F32-D-QFN24 の用途: 6 件s: Battery-Powered Sensor Nodes, Industrial Condition Monitoring, Smart Energy Meters, Portable Health and Wearable Devices, IoT Control and Monitoring, Compact Access and Security Panels.
Battery-Powered Sensor Nodes
The EFM32TG108F32-D-QFN24 fits compact battery-powered sensor nodes because its Tiny Gecko platform combines a 32 MHz Cortex-M3 core with energy-saving modes and fast wake-up behavior. The 32 kB Flash can hold application firmware, while 4 kB RAM supports short-lived sampling and control buffers. Two 16-bit timers provide predictable intervals for sensor polling, timeout handling, and low-rate actuator updates. A design can remain in a reduced-power state between measurements, wake for a short processing interval, and return to sleep. Actual battery life depends on sensor duty cycle, wake frequency, and board leakage.
おすすめ
Industrial Condition Monitoring
The EFM32TG108F32-D-QFN24 is appropriate for compact condition-monitoring controllers that collect periodic sensor information and perform local control. Seventeen digital I/O pins provide connections for digital sensors, alarm inputs, and status indicators, while two 16-bit timers support measurement intervals and pulse-related tasks. Its 1.98 V to 3.8 V supply range permits integration into low-voltage industrial electronics. The compact 24-QFN 5 x 5 mm package helps reduce board area, although the finished product must be checked against the required temperature range and environmental qualification level.
おすすめ
Smart Energy Meters
The EFM32TG108F32-D-QFN24 can serve as the control processor in a compact smart energy meter that periodically acquires measurements and updates local indicators or communications. Its 32 MHz Cortex-M3 core provides more processing headroom than a 24 MHz Cortex-M0+ configuration, while the two 16-bit timers are useful for sampling intervals and pulse accumulation. The 17 available digital I/O pins support digital meter inputs and outputs. Board-level accuracy of current or voltage measurements still depends on external sensing circuitry, calibration, and the metrology requirements of the finished instrument.
おすすめ
Portable Health and Wearable Devices
The EFM32TG108F32-D-QFN24 supports compact wearable and portable health accessories where space, energy use, and processing demand must be balanced. The 24-QFN 5 x 5 mm package reduces occupied board area, while fast wake-up and energy-saving modes help the system remain inactive between user interactions or sensor events. Seventeen digital I/O pins can connect to simple sensors, buttons, and status indicators. Product development must validate the medical classification, applicable safety requirements, battery protection, and all peripheral specifications independently of the MCU selection.
おすすめ
IoT Control and Monitoring
The EFM32TG108F32-D-QFN24 is well matched to IoT control products that wake periodically to collect sensor information, evaluate thresholds, and update an actuator or communications module. Its 32 kB Flash supports a compact control application, and 4 kB RAM is sufficient for moderate working sets and protocol buffers. Two 16-bit timers can divide system time among acquisition, communication, and maintenance tasks. The MCU's low-power architecture is useful when the radio or other high-load subsystem is enabled only intermittently, although radio specifications and antenna design remain separate system-level considerations.
おすすめ
Compact Access and Security Panels
The EFM32TG108F32-D-QFN24 can act as the central controller in a compact access panel, alarm controller, or security accessory. Seventeen digital I/O pins are useful for key switches, indicator outputs, alarm inputs, and external interlocks, while two 16-bit timers handle timing functions and periodic maintenance tasks. The Cortex-M3 core provides 32 MHz processing performance for event handling, and the small 24-QFN package supports space-constrained enclosures. Deployment in security equipment requires careful validation of the final board, interface behavior, tamper response, and applicable product regulations.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: EFM32TG108F32-D-QFN24 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | EFM32TG108F32-QFN24 | EFM32TG108F32-QFN24R | EFM32TG108F32-QFN24T | EFM32ZG108F32-QFN24 | EFM32HG108F32G-C-QFN24 |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 24-QFN (5x5) | 24-QFN (5x5) | 24-QFN (5x5) | 24-QFN (5x5) | 24-QFN (5x5) | 24-QFN (5x5) |
主な差別化要因
- Higher maximum clock rate than the Cortex-M0+ alternative (vs EFM32ZG108F32-QFN24)
- Direct family configuration with unchanged listed performance (vs EFM32TG108F32-QFN24)
- Compact 24-QFN footprint for space-constrained products (vs EFM32HG108F32G-C-QFN24)
設計ノート
Use the manufacturer QFN24 land pattern and keep the exposed-pad connection consistent with the pin-description table. Place the supply bypass capacitors close to the associated power and ground pins, and provide a low-impedance ground reference beneath the device where the package guidance permits. Check the exact ordering code before release because ordering suffixes can encode device grade, temperature range, or shipping configuration.
Design the supply for the complete 1.98 V to 3.8 V device range and the voltage required by attached peripherals. Confirm regulator tolerance, startup behavior, and the maximum operating mode specified for the product. For battery-powered designs, estimate average consumption from active current, sleep current, wake frequency, and the duration of each processing interval. Use the manufacturer power tables for measurements rather than applying one current value to every operating state.
Do not treat a same-package alternative as a firmware-identical replacement without checking the peripheral map and startup behavior. EFM32ZG108F32-QFN24 uses a Cortex-M0+ core at up to 24 MHz rather than the target's Cortex-M3 at up to 32 MHz, while EFM32HG108F32G-C-QFN24 requires detailed comparison of its characteristics. Rebuild and test the application whenever the processor core, clock limit, pin function, or memory configuration changes.
Review the programming and debug signals, reset behavior, clock components, and exposed-pad layout in the manufacturer reference documentation before final routing. Keep sensitive timing or measurement routes away from noisy switching nodes and provide a clean return path for the MCU. If the board combines the MCU with radio, display, relay, or power-conversion circuitry, validate the complete power-up sequence rather than testing only the isolated controller.
コンプライアンス情報
Compliance status was not established by the cited manufacturer product description or product-page excerpt.