EP2S90F1508C3N - Stratix II FPGA, 90K LE, 902 I/O, 1508-FBGA | Intel
料号： EP2S90F1508C3N ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $4539.56 | $4,539.56 |
| 10 | $4200 | $42,000.00 |
| 100 | $3850 | $385,000.00 |
| 500 | $3500 | $1,750,000.00 |
| 1,000 | $3200 | $3,200,000.00 |
EP2S90F1508C3N 概述
A Field Programmable Gate Array (FPGA) is a semiconductor device built around a matrix of configurable logic blocks (CLBs / ALMs), programmable interconnect, and dedicated hardware such as block RAM, DSP blocks, PLLs, and high-speed transceivers. FPGAs occupy a position between general-purpose microcontrollers and ASICs in the hardware design hierarchy: microcontroller -> microprocessor -> SoC -> FPGA -> ASIC. They are valued for parallel processing, deterministic latency, and rapid design iteration without the NRE cost of an ASIC.
Key features of the EP2S90F1508C3N include 4,548 LABs/ALMs organized across the fabric, embedded multipliers for DSP, multiple PLLs and global clock networks, and 902 I/O pins supporting a broad range of single-ended and differential I/O standards (LVTTL, LVCMOS, LVDS, HSTL, SSTL, etc.). The FCBGA package exposes a high pin count that enables wide external memory buses and dense transceiver fan-out. The -3 speed grade indicates a commercial-grade timing bin, and the part is part of a long-running design ecosystem supported by the Altera/Intel Quartus II toolchain.
Typical applications include high-speed digital signal processing for radar and beamforming, telecom baseband and protocol processing, high-throughput video processing pipelines, ASIC prototyping and emulation, and industrial control systems requiring parallel I/O. Engineers choose the EP2S90F1508C3N when they need the largest fabric density in the 1508-FBGA package at a specific speed and temperature grade.
Designers must pay attention to the FCBGA ball pattern, which demands multi-layer PCB with controlled-impedance routing, microvia stack-ups, and careful power-delivery network design for the core and I/O rails. Stratix II FPGAs require multiple supply rails (VCCINT, VCCIO banks, VCCAUX, VCCPD) that must be sequenced correctly. Thermal management with a heatsink or airflow is typically required at full utilization and high toggle rates.
This page synthesizes real distributor pricing, drop-in alternatives from the same Stratix II family, and practical design considerations that are not consolidated on any single distributor page.
直接替换替代料： EP2S90F1508C3N ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： EP2S90F1508C3N （相同外形与封装尺寸） ——差异在于 Package, Speed Grade, Mounting Type, Family, Process Technology.
快速对比工具——选择替代料号进行并排对比：
EP2S90F1508C3
✅ 直接替换✓ 有现货
$3719.39 / 个
查看数据手册 →EP2S90F1508C3NAA
✅ 直接替换📋 参考替代料（不在目录中）
EP2S90F1508C4N
✅ 直接替换✓ 有现货
$1390 / 个
查看数据手册 →EP2S90F1508C5N
✅ 直接替换✓ 有现货
$3780 / 个
查看数据手册 →EP2S90F1508I3N
✅ 直接替换📋 参考替代料（不在目录中）
EP2S130F1508C3N
✅ 直接替换✓ 有现货
$270 / 个
查看数据手册 →EP2S180F1508C3N
✅ 直接替换✓ 有现货
$1200 / 个
查看数据手册 →EP2S90F1508C3N 最大额定值与电气特性
| Series | Stratix II |
| Manufacturer | Altera (now Intel) |
| Logic Elements | 90,960 |
| Embedded Memory Bits | 4,520,488 |
| LABs / ALMs | 4,548 |
| User I/Os | 902 |
| Number of Terminals | 1508 |
| Package Type | 1508-BBGA, FCBGA (Flip-Chip BGA) |
| 安装类型 | Surface Mount |
| Process Node | 90 nm |
| Operating Temperature Grade | Commercial |
| Speed Grade | -3 |
| Core Voltage (VCCINT) | 1.2 V (typical) |
| Lead-Free / RoHS | RoHS compliant per Intel product page |
| 湿敏等级（MSL） | 3 (per JEDEC J-STD-020, reflow at 260 C) |
| Configuration | FPGA, SRAM-based |
EP2S90F1508C3N 1508-bbga, fcbga (flip-chip bga) 引脚配置指南
EP2S90F1508C3N（1508-bbga, fcbga (flip-chip bga) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： EP2S90F1508C3N.
请参阅 数据手册 以查看完整引脚配置。
典型应用
EP2S90F1508C3N 适用于 6 应用s: High-Performance DSP / Radar Signal Processing, Telecom Baseband / Protocol Processing, Video Processing and Imaging Pipelines, ASIC Prototyping and Emulation, Industrial Control and Machine Vision, Test & Measurement Instrumentation.
High-Performance DSP / Radar Signal Processing
The EP2S90F1508C3N's 90,960 logic elements combined with embedded DSP blocks and 4,520,488 bits of TriMatrix memory make it well suited to radar baseband and beamforming pipelines. With 902 user I/Os it can interface to multiple ADC/DAC channels and DDR2 memory banks in parallel. Compared with the EP2S130F1508C3N, the EP2S90 provides headroom only when logic utilization stays below ~85%, whereas larger fabric variants are required for full-channel MIMO radar arrays.
推荐
Telecom Baseband / Protocol Processing
In telecom infrastructure, the EP2S90F1508C3N can implement multi-channel baseband processing, CPRI / OBSAI framer logic, and channel-coding accelerators. The -3 speed grade is sufficient for backhaul line rates up to several Gbps when paired with the embedded transceivers in pin-compatible Stratix II variants. The 902 I/Os fan out across multiple SFP/QSFP cages and external TCAMs, while the FPGA's hard IP blocks accelerate FFTs and Viterbi decoders.
推荐
Video Processing and Imaging Pipelines
The EP2S90F1508C3N serves well in broadcast and surveillance video applications, where its 902 I/Os accept parallel video busses (BT.1120, Camera Link, DisplayPort aux) and its memory bandwidth sustains 1080p60 pixel-rate processing. The 4 Mbit on-chip block RAM enables line buffering and motion-estimation windows without external memory contention. Compared with the EP2S180F1508C3N, designers gain 90,000 LEs which is sufficient for 2D filters and scaling engines but tight for full 4K multi-stream.
推荐
ASIC Prototyping and Emulation
The EP2S90F1508C3N is widely used as a building block in ASIC prototyping platforms because it offers 90,960 logic elements, ample TriMatrix memory for transaction recording, and 902 I/Os for chip-to-chip bridging on the prototyping PCB. Multiple EP2S90F1508C3N devices can be tiled on the same backplane to emulate ASICs of several million gates, with the FCBGA package providing the bandwidth needed for time-domain-multiplexed interconnect.
推荐
Industrial Control and Machine Vision
In factory automation and machine-vision systems, the EP2S90F1508C3N integrates multi-axis motor-control loops, deterministic real-time Ethernet (EtherCAT, PROFINET) MAC logic, and image preprocessing for line-scan cameras. The -3 commercial speed grade is adequate for 100-Mbit real-time Ethernet and 1-Mpixel camera pipelines. The I-grade variant EP2S90F1508I3N is recommended for industrial-temperature environments (-40 C to +100 C junction).
推荐
Test & Measurement Instrumentation
The EP2S90F1508C3N enables protocol-aware test equipment such as logic analyzers, pattern generators, and high-speed serial protocol testers (PCIe, SATA, USB 3.0) where its 902 I/Os sample or drive many channels simultaneously. The on-chip TriMatrix memory supports deep capture buffers while the DSP blocks accelerate CRC and 8b/10b decoding. The 1508-FCBGA package's high pin count is essential for connecting to high-bandwidth ADC/DAC front ends in oscilloscope and BERT designs.
推荐
推荐产品汇总
工程参考数据： EP2S90F1508C3N ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | EP2S90F1508C3 | EP2S90F1508C3NAA | EP2S90F1508C4N | EP2S90F1508C5N | EP2S90F1508I3N | EP2S130F1508C3N | EP2S180F1508C3N |
|---|---|---|---|---|---|---|---|---|
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Package | 1508-FCBGA | 1508-FCBGA - same | 1508-FCBGA - same | 1508-FCBGA - same | 1508-FCBGA - same | 1508-FCBGA - same | 1508-FCBGA - same | 1508-FCBGA - same |
| Logic Elements | 90,960 | 90,960 | 90,960 | 90,960 | 90,960 | 90,960 | 132,540 | 179,400 |
| User I/Os | 902 | 902 | 902 | 902 | 902 | 902 | 902 | 902 |
| Speed Grade | -3 (commercial) | -3 (commercial) | -3 (commercial) | -4 (faster) | -5 (fastest) | -3 (industrial) | -3 (commercial) | -3 (commercial) |
| Embedded Memory Bits | 4,520,488 | 4,520,488 | 4,520,488 | 4,520,488 | 4,520,488 | 6,747,840 | 9,383,040 | |
| Process Node | 90 nm | 90 nm | 90 nm | 90 nm | 90 nm | 90 nm | 90 nm | |
| RoHS Compliant | Yes (N suffix) | Legacy (no N suffix) | Yes (N + AA suffix) | Yes (N suffix) | Yes (N suffix) | Yes (N suffix) | Yes (N suffix) | Yes (N suffix) |
关键差异点
- Drop-in speed-grade upgrade path on the same 1508-FCBGA footprint （对比 EP2S90F1508C4N / EP2S90F1508C5N)
- Industrial-temperature variant on the same footprint for harsh environments （对比 EP2S90F1508I3N)
- Higher logic density available on identical package for future-proofing （对比 EP2S130F1508C3N / EP2S180F1508C3N)
设计说明
The 1508-ball FCBGA package requires a high-density PCB stack-up with microvias, 50-ohm controlled-impedance routing for high-speed I/O, and a continuous power plane beneath the device. Use a 6+ layer stack-up with dedicated VCCINT and VCCIO power planes, and place decoupling capacitors within 100 mils of every power pin. Follow JEDEC JESD51-series thermal measurement guidelines and provide a thermal pad array under the package for ground/thermal bond.
Stratix II devices require multiple sequenced supplies: VCCINT (1.2 V core), VCCIO banks (1.5/1.8/2.5/3.3 V depending on I/O standard), VCCAUX (2.5 V), VCCPD (3.3 V), and VCC_CLKIN. Power-on sequencing must follow the order specified in the Stratix II datasheet (SII51002) - typically VCCINT first, then VCCPD, then VCCAUX, then VCCIO. Use a multi-rail controller such as the LTC2978 or TPS51200 to guarantee monotonic ramp-up and avoid in-rush currents that can latch-up the device.
At high toggle rates and full fabric utilization, the EP2S90F1508C3N can dissipate 10-20 W. Estimate junction temperature using the package thermal resistance (theta-JA ~10 C/W for FCBGA with airflow). Attach a heatsink with thermal interface material and ensure 200 LFM minimum airflow. Monitor the on-die temperature sensing diode via the JTAG or dedicated ALT_TEMP pin for closed-loop thermal management during characterization.
Because the Stratix II family is NRND, do not design new production boards with EP2S90F1508C3N as the primary FPGA without a dual-source plan. Either design in a same-footprint larger variant (EP2S130F1508C3N or EP2S180F1508C3N) as a second source, or migrate to a Stratix IV / V or Cyclone 10 GX equivalent. Confirm MSL-3 floor life (168 hours) and bake the device per JEDEC J-STD-033 before reflow if the floor life has been exceeded.
合规信息
RoHS compliance verified per Intel/Altera product page. N suffix designates lead-free (Pb-free) handling. MSL-3 per JEDEC J-STD-020. AEC-Q100 is not applicable to commercial-grade FPGAs; industrial variants are graded per Intel/Altera industrial specifications but are not formally AEC-Q100 qualified.
