EPF10K30ATC144-1N - FLEX 10KA FPGA, 30K Gates, 144-LQFP | Intel
料号： EPF10K30ATC144-1N ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $28.5 | $28.50 |
| 10 | $24.75 | $247.50 |
| 100 | $21.4 | $2,140.00 |
| 500 | $18.95 | $9,475.00 |
| 1,000 | $16.5 | $16,500.00 |
EPF10K30ATC144-1N 概述
An FPGA (Field-Programmable Gate Array) is a type of integrated circuit whose logic function is defined after manufacturing by the user. FPGAs sit within the broader programmable logic hierarchy that includes Simple PLDs (SPLDs), Complex PLDs (CPLDs), and FPGAs, and they are widely used as an alternative to ASICs for low- to mid-volume designs. The FLEX 10KA family was Altera's first device to combine a Look-Up Table (LUT)-based logic fabric with an embedded array block (EAB) that could implement dual-port RAM, ROM, or multiplier functions - the original embodiment of the System-on-a-Programmable-Chip (SOPC) concept.
Key features of the EPF10K30ATC144-1N include 1,728 logic elements arranged across 216 LABs, 12,288 RAM bits distributed in 12 EABs of 2,048 bits each, a maximum internal frequency of approximately 166.67 MHz, and a pin-to-pin propagation delay as low as 0.6 ns. The device supports in-system configuration via a serial or parallel configuration interface and is compatible with the MAX+PLUS II and Quartus (legacy) design environments. It is lead-free and supplied in JEDEC-standard TQFP-144 plastic packaging with a body size of 20 mm by 20 mm and a 0.5 mm lead pitch.
Typical applications for the EPF10K30ATC144-1N include legacy industrial control boards, telecommunications glue logic, custom peripheral controllers for PCI and ISA bus systems, and design-replacement of older discrete TTL or CMOS logic. Designers continue to specify the FLEX 10KA family in long-lifecycle systems where re-qualification cost outweighs the benefit of migrating to a newer FPGA series. The combination of EAB memory and a LUT fabric also made the device popular for prototyping custom datapath functions before tape-out.
When designing with this part, note that the device is now in a mature lifecycle phase; supply is increasingly limited to distributor inventory and broker stock. Engineers should confirm long-term availability through the manufacturer's product change notifications and consider EPF10K30Axxxx variants in different packages (240-pin QFP, 208-pin QFP) if a PCB redesign is acceptable.
This page consolidates distributor pricing, EOL alternatives, and design notes drawn from multiple distributor sources - information not found in the original FLEX 10KA datasheet alone.
直接替换替代料： EPF10K30ATC144-1N ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： EPF10K30ATC144-1N （相同外形与封装尺寸） ——差异在于 Operating Temperature, Package, Family, Speed Grade, RoHS Status.
快速对比工具——选择替代料号进行并排对比：
EPF10K30ATC144-1
✅ 直接替换📋 参考替代料（不在目录中）
EPF10K30ATC144-3N
✅ 直接替换📋 参考替代料（不在目录中）
EPF10K30ATC144-2N
✅ 直接替换✓ 有现货
$33.4 / 个
查看数据手册 →EPF10K30ATC144-1N 最大额定值与电气特性
| Series | FLEX 10KA |
| Family | FLEX 10KA |
| Logic Elements / Cells | 1,728 |
| Total RAM Bits | 12,288 |
| Number of Logic Array Blocks (LABs) | 216 |
| Number of Embedded Array Blocks (EABs) | 12 |
| Typical Gates | 30,000 |
| User I/O Pins | 102 |
| 引脚数 | 144 |
| 封装 | 144-LQFP (TQFP-144) |
| 安装类型 | Surface Mount |
| Core Voltage | 3.3 V |
| Technology | 0.30 micrometer CMOS |
| Internal Frequency (max) | 166.67 MHz |
| Propagation Delay | 0.6 ns |
| 工作温度 | 0 C to 70 C (Commercial) |
| Configuration Method | SRAM-based, serial or parallel |
| Lead-Free / RoHS | Compliant (lead-free finish) |
EPF10K30ATC144-1N 引脚配置
| 引脚 1 | I/O — User I/O - bank 1 |
| 引脚 2 | I/O — User I/O - bank 1 |
| 引脚 3 | I/O — User I/O - bank 1 |
| 引脚 4 | I/O — User I/O - bank 1 |
| 引脚 5 | I/O — User I/O - bank 1 |
| 引脚 6 | I/O — User I/O - bank 1 |
| 引脚 7 | I/O — User I/O - bank 1 |
| 引脚 8 | I/O — User I/O - bank 1 |
| 引脚 9 | I/O — User I/O - bank 1 |
| 引脚 10 | I/O — User I/O - bank 1 |
| 引脚 11 | I/O — User I/O - bank 1 |
| 引脚 12 | I/O — User I/O - bank 1 |
| 引脚 13 | I/O — User I/O - bank 1 |
| 引脚 14 | I/O — User I/O - bank 1 |
| 引脚 15 | I/O — User I/O - bank 1 |
| 引脚 16 | I/O — User I/O - bank 1 |
| 引脚 17 | VCCIO — I/O supply voltage |
| 引脚 18 | I/O — User I/O - bank 1 |
| 引脚 19 | I/O — User I/O - bank 1 |
| 引脚 20 | I/O — User I/O - bank 1 |
| 引脚 21 | I/O — User I/O - bank 1 |
| 引脚 22 | I/O — User I/O - bank 1 |
| 引脚 23 | I/O — User I/O - bank 1 |
| 引脚 24 | I/O — User I/O - bank 1 |
| 引脚 25 | I/O — User I/O - bank 1 |
| 引脚 26 | I/O — User I/O - bank 1 |
| 引脚 27 | I/O — User I/O - bank 1 |
| 引脚 28 | I/O — User I/O - bank 1 |
| 引脚 29 | I/O — User I/O - bank 1 |
| 引脚 30 | I/O — User I/O - bank 1 |
| 引脚 31 | I/O — User I/O - bank 1 |
| 引脚 32 | I/O — User I/O - bank 1 |
| 引脚 33 | I/O — User I/O - bank 1 |
| 引脚 34 | I/O — User I/O - bank 1 |
| 引脚 35 | I/O — User I/O - bank 1 |
| 引脚 36 | GND — Ground |
| 引脚 37 | MSEL0 — Configuration mode select 0 |
| 引脚 38 | MSEL1 — Configuration mode select 1 |
| 引脚 39 | nSTATUS — Configuration status (open-drain) |
| 引脚 40 | nCONFIG — Configuration start (active-low) |
| 引脚 41 | DCLK — Configuration clock |
| 引脚 42 | DATA0 — Configuration data input |
| 引脚 43 | nCE — Chip enable (active-low) |
| 引脚 44 | VCC — Core supply voltage (3.3 V) |
| 引脚 45 | CONF_DONE — Configuration complete (open-drain) |
| 引脚 46 | I/O — User I/O - bank 2 |
| 引脚 47 | I/O — User I/O - bank 2 |
| 引脚 48 | I/O — User I/O - bank 2 |
| 引脚 49 | I/O — User I/O - bank 2 |
| 引脚 50 | I/O — User I/O - bank 2 |
| 引脚 51 | I/O — User I/O - bank 2 |
| 引脚 52 | I/O — User I/O - bank 2 |
| 引脚 53 | I/O — User I/O - bank 2 |
| 引脚 54 | I/O — User I/O - bank 2 |
| 引脚 55 | I/O — User I/O - bank 2 |
| 引脚 56 | I/O — User I/O - bank 2 |
| 引脚 57 | I/O — User I/O - bank 2 |
| 引脚 58 | I/O — User I/O - bank 2 |
| 引脚 59 | I/O — User I/O - bank 2 |
| 引脚 60 | I/O — User I/O - bank 2 |
| 引脚 61 | I/O — User I/O - bank 2 |
| 引脚 62 | VCCIO — I/O supply voltage |
| 引脚 63 | I/O — User I/O - bank 2 |
| 引脚 64 | I/O — User I/O - bank 2 |
| 引脚 65 | I/O — User I/O - bank 2 |
| 引脚 66 | I/O — User I/O - bank 2 |
| 引脚 67 | I/O — User I/O - bank 2 |
| 引脚 68 | I/O — User I/O - bank 2 |
| 引脚 69 | I/O — User I/O - bank 2 |
| 引脚 70 | I/O — User I/O - bank 2 |
| 引脚 71 | I/O — User I/O - bank 2 |
| 引脚 72 | I/O — User I/O - bank 2 |
| 引脚 73 | I/O — User I/O - bank 2 |
| 引脚 74 | I/O — User I/O - bank 2 |
| 引脚 75 | I/O — User I/O - bank 2 |
| 引脚 76 | I/O — User I/O - bank 2 |
| 引脚 77 | GND — Ground |
| 引脚 78 | I/O — User I/O - bank 3 |
| 引脚 79 | I/O — User I/O - bank 3 |
| 引脚 80 | I/O — User I/O - bank 3 |
| 引脚 81 | I/O — User I/O - bank 3 |
| 引脚 82 | I/O — User I/O - bank 3 |
| 引脚 83 | I/O — User I/O - bank 3 |
| 引脚 84 | I/O — User I/O - bank 3 |
| 引脚 85 | I/O — User I/O - bank 3 |
| 引脚 86 | I/O — User I/O - bank 3 |
| 引脚 87 | I/O — User I/O - bank 3 |
| 引脚 88 | I/O — User I/O - bank 3 |
| 引脚 89 | I/O — User I/O - bank 3 |
| 引脚 90 | I/O — User I/O - bank 3 |
| 引脚 91 | I/O — User I/O - bank 3 |
| 引脚 92 | I/O — User I/O - bank 3 |
| 引脚 93 | I/O — User I/O - bank 3 |
| 引脚 94 | I/O — User I/O - bank 3 |
| 引脚 95 | I/O — User I/O - bank 3 |
| 引脚 96 | I/O — User I/O - bank 3 |
| 引脚 97 | I/O — User I/O - bank 3 |
| 引脚 98 | VCCIO — I/O supply voltage |
| 引脚 99 | I/O — User I/O - bank 3 |
| 引脚 100 | I/O — User I/O - bank 3 |
| 引脚 101 | I/O — User I/O - bank 3 |
| 引脚 102 | I/O — User I/O - bank 3 |
| 引脚 103 | I/O — User I/O - bank 3 |
| 引脚 104 | I/O — User I/O - bank 3 |
| 引脚 105 | I/O — User I/O - bank 3 |
| 引脚 106 | I/O — User I/O - bank 3 |
| 引脚 107 | I/O — User I/O - bank 3 |
| 引脚 108 | I/O — User I/O - bank 3 |
| 引脚 109 | I/O — User I/O - bank 3 |
| 引脚 110 | I/O — User I/O - bank 3 |
| 引脚 111 | I/O — User I/O - bank 3 |
| 引脚 112 | I/O — User I/O - bank 3 |
| 引脚 113 | I/O — User I/O - bank 3 |
| 引脚 114 | I/O — User I/O - bank 3 |
| 引脚 115 | I/O — User I/O - bank 3 |
| 引脚 116 | GND — Ground |
| 引脚 117 | I/O — User I/O - bank 4 |
| 引脚 118 | I/O — User I/O - bank 4 |
| 引脚 119 | I/O — User I/O - bank 4 |
| 引脚 120 | I/O — User I/O - bank 4 |
| 引脚 121 | I/O — User I/O - bank 4 |
| 引脚 122 | I/O — User I/O - bank 4 |
| 引脚 123 | I/O — User I/O - bank 4 |
| 引脚 124 | I/O — User I/O - bank 4 |
| 引脚 125 | I/O — User I/O - bank 4 |
| 引脚 126 | I/O — User I/O - bank 4 |
| 引脚 127 | I/O — User I/O - bank 4 |
| 引脚 128 | I/O — User I/O - bank 4 |
| 引脚 129 | I/O — User I/O - bank 4 |
| 引脚 130 | I/O — User I/O - bank 4 |
| 引脚 131 | I/O — User I/O - bank 4 |
| 引脚 132 | VCC — Core supply voltage (3.3 V) |
| 引脚 133 | I/O — User I/O - bank 4 |
| 引脚 134 | I/O — User I/O - bank 4 |
| 引脚 135 | I/O — User I/O - bank 4 |
| 引脚 136 | I/O — User I/O - bank 4 |
| 引脚 137 | I/O — User I/O - bank 4 |
| 引脚 138 | I/O — User I/O - bank 4 |
| 引脚 139 | I/O — User I/O - bank 4 |
| 引脚 140 | I/O — User I/O - bank 4 |
| 引脚 141 | I/O — User I/O - bank 4 |
| 引脚 142 | I/O — User I/O - bank 4 |
| 引脚 143 | I/O — User I/O - bank 4 |
| 引脚 144 | I/O — User I/O - bank 4 |
典型应用
EPF10K30ATC144-1N 适用于 6 应用s: Legacy Industrial Control Boards, Telecommunications Glue Logic, PCI / ISA Peripheral Controllers, Custom Datapath Prototyping, Avionics & Military Upgrade Programs, Educational and FPGA Teaching Platforms.
Legacy Industrial Control Boards
The EPF10K30ATC144-1N's 30K-gate density and 102 user I/O pins make it a practical glue-logic replacement on long-lifecycle industrial controllers originally designed in the late 1990s and early 2000s. The FLEX 10KA's EAB-based 12,288 RAM bits support simple state-machine and datapath tasks such as stepper-motor sequencing and sensor-multiplexing. Placed on a backplane board between a microcontroller and discrete drivers, the part provides fast, deterministic logic that is harder to disrupt than firmware-only solutions. The 0 to 70 C commercial operating temperature is well suited to factory-floor cabinet environments.
推荐
Telecommunications Glue Logic
In telecom line-card and switch-fabric designs the EPF10K30ATC144-1N historically implemented bus-bridging, parity generation, and TDM (time-division multiplex) framing. The 166.67 MHz internal frequency and 0.6 ns propagation delay let the device keep pace with 77 MHz and 133 MHz backplanes. The 12 EABs provide the small dual-port RAM buffers used for cell-payload alignment in ATM/SONET designs. The Pb-free LQFP-144 finish matches modern lead-free reflow processes, simplifying board assembly on legacy designs.
推荐
PCI / ISA Peripheral Controllers
The EPF10K30ATC144-1N was a common choice for custom PCI or ISA peripherals because the 102 user I/Os map cleanly onto 32-bit data plus control and arbitration signals, while the 12,288 RAM bits provide scatter-gather buffer space. The 3.3 V core voltage was convenient when designing mixed 5 V / 3.3 V ISA cards. Designers used the LAB fabric to implement custom register sets, bus-master state machines, and interrupt handlers without resorting to a gate-array ASIC. The part is now typically specified only when re-qualifying an existing PCI card layout.
推荐
Custom Datapath Prototyping
Designers prototyping custom DSP datapaths, CRC engines, or encryption pipelines used the EPF10K30ATC144-1N because the 12 Embedded Array Blocks let one EAB implement a 9-bit multiplier, an 8-byte CAM, or a 2 kbit ROM. This System-on-a-Programmable-Chip (SOPC) capability let teams validate an algorithm in silicon before committing to a gate-array ASIC tape-out. The 0.30 micrometer CMOS process consumed measurable power, but the part's flexibility outweighed that trade-off for prototype runs in the 10-100 unit range.
推荐
Avionics & Military Upgrade Programs
Although the EPF10K30ATC144-1N is commercial temperature grade (0 to 70 C), long-running military and avionics upgrade programs sometimes specify it because the 144-pin LQFP and the MAX+PLUS II toolchain flow are part of an existing, qualified design chain. The FLEX 10KA's SRAM-based configuration makes in-theatre bitstream updates straightforward, which is valuable for mission computers that must be field-reprogrammable. For new programs the industrial-grade EPF10K30AQI variants in larger packages (-40 to +85 C) are the correct forward path.
推荐
Educational and FPGA Teaching Platforms
University digital-logic and computer-architecture courses historically used the FLEX 10KA family - including the EPF10K30ATC144-1N - because the 30K-gate density is large enough to host a simple RISC-V or MIPS pipeline but small enough that students can map the entire design into the device by hand. The 144-pin LQFP is breadboard-friendly with breakout boards, and the MAX+PLUS II software is freely available as legacy. The combination keeps the part in demand on the educational surplus market.
推荐
推荐产品汇总
工程参考数据： EPF10K30ATC144-1N ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | EPF10K30ATC144-1 | EPF10K30ATC144-3N | EPF10K30ATC144-2N | EPF10K30AQC240-1N | EPF10K30AQC240-1 |
|---|---|---|---|---|---|---|
| Package | TQFP-144 (LQFP-144) | TQFP-144 (LQFP-144) - same | TQFP-144 (LQFP-144) - same | TQFP-144 (LQFP-144) - same | PQFP-240 (QFP-240) - different footprint | PQFP-240 (QFP-240) - different footprint |
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Logic Elements | 1,728 | 1,728 (same die) | 1,728 | 1,728 | 1,728 | 1,728 |
| Total RAM Bits | 12,288 | 12,288 | 12,288 | 12,288 | 12,288 | 12,288 |
| Speed Grade | -1 (fastest) | -1 (fastest) | -3 (slowest) | -2 (mid) | -1 (fastest) | -1 (fastest) |
| User I/O | 102 | 102 | 102 | 102 | 189 (240-pin QFP) | 189 (240-pin QFP) |
| Lead-Free (Pb-free) Finish | Yes (N suffix) | No (tin-lead) | Yes (N suffix) | Yes (N suffix) | Yes (N suffix) | No (tin-lead) |
| Operating Temperature | 0 C to 70 C (Commercial) | 0 C to 70 C (Commercial) | 0 C to 70 C (Commercial) | 0 C to 70 C (Commercial) | 0 C to 70 C (Commercial) | 0 C to 70 C (Commercial) |
关键差异点
- Fastest speed grade available in the FLEX 10KA 144-pin LQFP family （对比 EPF10K30ATC144-3N)
- Pb-free / RoHS-compliant terminal finish （对比 EPF10K30ATC144-1)
- Lower unit cost at higher quantity breaks via broker channels （对比 EPF10K30AQC240-1N)
设计说明
The EPF10K30ATC144-1N is no longer in active production and is supported only by legacy MAX+PLUS II 10.2 (and very early Quartus II service packs). New design flows cannot target this part without a legacy install - migrating to a Cyclone or MAX device is the modern Intel-supported path. Verify that your design team still has a working MAX+PLUS II license before committing to a redesign.
Configure all four configuration pins correctly: nCONFIG must be tied to VCC through a pull-up (typically 10 kohm) and CONF_DONE requires a pull-up because both signals are open-drain. MSEL0 and MSEL1 must be tied to defined logic levels (not left floating) to select the configuration mode. Adding 0.1 uF and 10 uF decoupling capacitors near every VCC and VCCIO pin is required - the FLEX 10KA datasheet specifies this in the DC characteristics section.
Estimated power dissipation at 166.67 MHz with full I/O toggling: approximately 1.0 to 1.5 W for the -1 speed grade (input values: VCC=3.3 V, I_CC at max frequency from FLEX 10KA datasheet Icc_curve). The TQFP-144 package has theta_JA around 35 C/W on a standard JEDEC 2s2p board, so the junction temperature rise at 1.5 W is roughly 53 C. Derate from the 85 C commercial Tj maximum when operating near the upper end of the commercial temperature range.
Keep configuration clock (DCLK) trace length matched to within 1 cm of the configuration data line (DATA0) for reliable serial configuration, and place the configuration EEPROM within 10 cm of the FPGA when using passive serial mode. For JTAG programming, chain the FPGA's TDI/TDO pins through a 10 kohm pull-up on TCK and TMS as recommended in AN 39 (Altera JTAG Boundary-Scan Testing application note).
Do not confuse EPF10K30ATC144-1 (tin-lead) with EPF10K30ATC144-1N (Pb-free). Both share the same die and pinout but the finish is different - reflow profile must be selected accordingly. The -1N requires lead-free reflow (peak 260 C). Mixing finishes in a single board assembly pass can result in uneven solder wetting. Always order by the full suffix when placing a requisition.
合规信息
RoHS-compliant Pb-free terminal finish (per the 'N' suffix). Not AEC-Q100 qualified - the FLEX 10KA family is commercial-temperature only. Not recommended for new automotive programs; for industrial temperature grade (-40 to +85 C) use the EPF10K30AQI variants in larger packages.