EPF6024ATC14A-4 - FLEX 6000 FPGA, 24K Gates | Altera
料号： EPF6024ATC14A-4 ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $34 | $34.00 |
| 10 | $30.6 | $306.00 |
| 100 | $27.2 | $2,720.00 |
| 500 | $24 | $12,000.00 |
| 1,000 | $21 | $21,000.00 |
EPF6024ATC14A-4 概述
A Field Programmable Gate Array (FPGA) is a programmable logic device built from a matrix of configurable logic blocks (LABs), an interconnect network, and programmable I/O elements. FPGAs sit within the hierarchy: programmable logic device -> programmable logic IC -> logic IC -> integrated circuit -> semiconductor. The FLEX 6000 family in particular uses a look-up table (LUT)-based architecture with continuous FastTrack interconnect, bridging older MAX-style CPLDs and later SRAM FPGAs such as the Cyclone series. Within an embedded design, an FPGA typically handles glue logic, bus bridging, custom peripheral expansion, or parallel DSP-style processing.
Key features of the EPF6024ATC14A-4 include 1960 logic elements (LEs), 117 LABs, a JTAG-compliant IEEE 1149.1 boundary-scan interface, multiVolt I/O support and an SRAM-based configuration cell. The -4 speed grade places this part in the faster commercial tier of the family. The device is fabricated on a 5V-tolerant CMOS process with a 3.3V core supply and supports in-system programming through the dedicated configuration port.
Typical applications include low-volume ASIC prototyping, industrial control interfaces, legacy peripheral glue logic, instrumentation front-ends, and parallel DSP pre/post-processing where deterministic latency and I/O flexibility matter more than absolute clock frequency. Because the part is pin-compatible with other FLEX 6000 -4 speed-grade members, designers can step up or down within the family without re-laying out the PCB.
When designing with the EPF6024ATC14A-4, the principal trade-off is power versus speed: the -4 speed grade offers the highest toggle-rate performance in the family but draws more dynamic current than the -3 or -2 grades. Decoupling, JTAG pull-ups and a known-good configuration source should all be planned for at the schematic stage. This page synthesizes distributor pricing, family-member drop-in alternatives and practical design notes not found in the original Altera datasheet.
直接替换替代料： EPF6024ATC14A-4 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： EPF6024ATC14A-4 （相同外形与封装尺寸） ——差异在于 Package, Speed Grade, Logic Array Blocks (LABs), Operating Temperature, Process Technology.
快速对比工具——选择替代料号进行并排对比：
EPF6024ATC144-3
✅ 直接替换✓ 有现货
$14.1 / 个
查看数据手册 →EPF6024ATC144-2
✅ 直接替换✓ 有现货
$24.95 / 个
查看数据手册 →EPF6024ATC144-1
✅ 直接替换✓ 有现货
$8.2 / 个
查看数据手册 →EPF6016ATC144-3
✅ 直接替换✓ 有现货
$9.85 / 个
查看数据手册 →EPF6010ATC144-3
✅ 直接替换✓ 有现货
$9.75 / 个
查看数据手册 →EPF6024ATC14A-4 最大额定值与电气特性
| Family | FLEX 6000 |
| Device Type | Field Programmable Gate Array (FPGA) |
| Typical Gates | 24,000 |
| Logic Elements (LEs) | 1960 |
| Logic Array Blocks (LABs) | 117 |
| Speed Grade | -4 |
| 封装 | TQFP-144 (TQ144) |
| Configuration Memory | SRAM |
| Core Supply Voltage | 3.3 V |
| I/O Supply Voltage | MultiVolt (3.3 V / 5 V tolerant) |
| Boundary-Scan Support | IEEE 1149.1 JTAG |
| In-System Programmability | Yes |
| RoHS 状态 | Unknown |
| 安装类型 | Surface Mount |
EPF6024ATC14A-4 引脚配置
| 引脚 1 | I/O — User I/O (bank) |
| 引脚 2 | I/O — User I/O (bank) |
| 引脚 3 | I/O — User I/O (bank) |
| 引脚 4 | I/O — User I/O (bank) |
| 引脚 5 | VCCIO — I/O supply voltage |
| 引脚 6 | I/O — User I/O (bank) |
| 引脚 7 | I/O — User I/O (bank) |
| 引脚 8 | I/O — User I/O (bank) |
| 引脚 9 | I/O — User I/O (bank) |
| 引脚 10 | GND — Ground |
| 引脚 11 | I/O — User I/O (bank) |
| 引脚 12 | I/O — User I/O (bank) |
| 引脚 13 | I/O — User I/O (bank) |
| 引脚 14 | I/O — User I/O (bank) |
| 引脚 15 | I/O — User I/O (bank) |
| 引脚 16 | VCCINT — Core supply voltage (3.3 V) |
| 引脚 17 | I/O — User I/O (bank) |
| 引脚 18 | I/O — User I/O (bank) |
| 引脚 19 | I/O — User I/O (bank) |
| 引脚 20 | I/O — User I/O (bank) |
| 引脚 21 | I/O — User I/O (bank) |
| 引脚 22 | GND — Ground |
| 引脚 23 | I/O — User I/O (bank) |
| 引脚 24 | I/O — User I/O (bank) |
| 引脚 25 | I/O — User I/O (bank) |
| 引脚 26 | I/O — User I/O (bank) |
| 引脚 27 | I/O — User I/O (bank) |
| 引脚 28 | VCCIO — I/O supply voltage |
| 引脚 29 | I/O — User I/O (bank) |
| 引脚 30 | I/O — User I/O (bank) |
| 引脚 31 | I/O — User I/O (bank) |
| 引脚 32 | I/O — User I/O (bank) |
| 引脚 33 | I/O — User I/O (bank) |
| 引脚 34 | GND — Ground |
| 引脚 35 | I/O — User I/O (bank) |
| 引脚 36 | I/O — User I/O (bank) |
| 引脚 37 | I/O — User I/O (bank) |
| 引脚 38 | I/O — User I/O (bank) |
| 引脚 39 | I/O — User I/O (bank) |
| 引脚 40 | VCCINT — Core supply voltage (3.3 V) |
| 引脚 41 | I/O — User I/O (bank) |
| 引脚 42 | I/O — User I/O (bank) |
| 引脚 43 | I/O — User I/O (bank) |
| 引脚 44 | I/O — User I/O (bank) |
| 引脚 45 | I/O — User I/O (bank) |
| 引脚 46 | GND — Ground |
| 引脚 47 | I/O — User I/O (bank) |
| 引脚 48 | I/O — User I/O (bank) |
| 引脚 49 | I/O — User I/O (bank) |
| 引脚 50 | I/O — User I/O (bank) |
| 引脚 51 | I/O — User I/O (bank) |
| 引脚 52 | VCCIO — I/O supply voltage |
| 引脚 53 | I/O — User I/O (bank) |
| 引脚 54 | I/O — User I/O (bank) |
| 引脚 55 | I/O — User I/O (bank) |
| 引脚 56 | I/O — User I/O (bank) |
| 引脚 57 | I/O — User I/O (bank) |
| 引脚 58 | GND — Ground |
| 引脚 59 | I/O — User I/O (bank) |
| 引脚 60 | I/O — User I/O (bank) |
| 引脚 61 | I/O — User I/O (bank) |
| 引脚 62 | I/O — User I/O (bank) |
| 引脚 63 | I/O — User I/O (bank) |
| 引脚 64 | VCCINT — Core supply voltage (3.3 V) |
| 引脚 65 | I/O — User I/O (bank) |
| 引脚 66 | I/O — User I/O (bank) |
| 引脚 67 | I/O — User I/O (bank) |
| 引脚 68 | I/O — User I/O (bank) |
| 引脚 69 | I/O — User I/O (bank) |
| 引脚 70 | GND — Ground |
| 引脚 71 | I/O — User I/O (bank) |
| 引脚 72 | I/O — User I/O (bank) |
| 引脚 73 | I/O — User I/O (bank) |
| 引脚 74 | I/O — User I/O (bank) |
| 引脚 75 | I/O — User I/O (bank) |
| 引脚 76 | VCCIO — I/O supply voltage |
| 引脚 77 | I/O — User I/O (bank) |
| 引脚 78 | I/O — User I/O (bank) |
| 引脚 79 | I/O — User I/O (bank) |
| 引脚 80 | I/O — User I/O (bank) |
| 引脚 81 | I/O — User I/O (bank) |
| 引脚 82 | GND — Ground |
| 引脚 83 | I/O — User I/O (bank) |
| 引脚 84 | I/O — User I/O (bank) |
| 引脚 85 | I/O — User I/O (bank) |
| 引脚 86 | I/O — User I/O (bank) |
| 引脚 87 | I/O — User I/O (bank) |
| 引脚 88 | VCCINT — Core supply voltage (3.3 V) |
| 引脚 89 | I/O — User I/O (bank) |
| 引脚 90 | I/O — User I/O (bank) |
| 引脚 91 | I/O — User I/O (bank) |
| 引脚 92 | I/O — User I/O (bank) |
| 引脚 93 | I/O — User I/O (bank) |
| 引脚 94 | GND — Ground |
| 引脚 95 | I/O — User I/O (bank) |
| 引脚 96 | I/O — User I/O (bank) |
| 引脚 97 | I/O — User I/O (bank) |
| 引脚 98 | I/O — User I/O (bank) |
| 引脚 99 | I/O — User I/O (bank) |
| 引脚 100 | VCCIO — I/O supply voltage |
| 引脚 101 | I/O — User I/O (bank) |
| 引脚 102 | I/O — User I/O (bank) |
| 引脚 103 | I/O — User I/O (bank) |
| 引脚 104 | I/O — User I/O (bank) |
| 引脚 105 | I/O — User I/O (bank) |
| 引脚 106 | GND — Ground |
| 引脚 107 | I/O — User I/O (bank) |
| 引脚 108 | I/O — User I/O (bank) |
| 引脚 109 | I/O — User I/O (bank) |
| 引脚 110 | I/O — User I/O (bank) |
| 引脚 111 | I/O — User I/O (bank) |
| 引脚 112 | VCCINT — Core supply voltage (3.3 V) |
| 引脚 113 | I/O — User I/O (bank) |
| 引脚 114 | I/O — User I/O (bank) |
| 引脚 115 | I/O — User I/O (bank) |
| 引脚 116 | I/O — User I/O (bank) |
| 引脚 117 | I/O — User I/O (bank) |
| 引脚 118 | GND — Ground |
| 引脚 119 | I/O — User I/O (bank) |
| 引脚 120 | I/O — User I/O (bank) |
| 引脚 121 | I/O — User I/O (bank) |
| 引脚 122 | I/O — User I/O (bank) |
| 引脚 123 | I/O — User I/O (bank) |
| 引脚 124 | VCCIO — I/O supply voltage |
| 引脚 125 | I/O — User I/O (bank) |
| 引脚 126 | I/O — User I/O (bank) |
| 引脚 127 | I/O — User I/O (bank) |
| 引脚 128 | I/O — User I/O (bank) |
| 引脚 129 | I/O — User I/O (bank) |
| 引脚 130 | GND — Ground |
| 引脚 131 | I/O — User I/O (bank) |
| 引脚 132 | I/O — User I/O (bank) |
| 引脚 133 | I/O — User I/O (bank) |
| 引脚 134 | I/O — User I/O (bank) |
| 引脚 135 | I/O — User I/O (bank) |
| 引脚 136 | VCCINT — Core supply voltage (3.3 V) |
| 引脚 137 | I/O — User I/O (bank) |
| 引脚 138 | I/O — User I/O (bank) |
| 引脚 139 | I/O — User I/O (bank) |
| 引脚 140 | I/O — User I/O (bank) |
| 引脚 141 | I/O — User I/O (bank) |
| 引脚 142 | GND — Ground |
| 引脚 143 | I/O — User I/O (bank) |
| 引脚 144 | I/O — User I/O (bank) |
典型应用
EPF6024ATC14A-4 适用于 6 应用s: Legacy ASIC Prototyping, Industrial Control Interface Bridge, Instrumentation Front-End Logic, Glue Logic Replacement on Legacy Boards, Custom Peripheral Expansion, Parallel DSP Pre/Post-Processing.
Legacy ASIC Prototyping
The EPF6024ATC14A-4 with 1960 logic elements and 24,000 typical gates is well suited to low-volume ASIC prototyping where fast design iteration is critical. Its SRAM-based configuration allows unlimited re-spins without mask changes, and the -4 speed grade supports timing closure on most glue-logic designs. Designers typically use the JTAG port for fast in-system bitstream download during bring-up, then freeze the design into a pin-compatible EPF6024ATC144-3 for production to reduce cost.
推荐
Industrial Control Interface Bridge
The EPF6024ATC14A-4 is widely used as a parallel-bus bridge between microcontrollers and legacy industrial peripherals such as ISA, PC/104 or custom 16-bit parallel interfaces. The 117 LABs provide enough logic capacity to implement FIFO buffers, address decoders and protocol converters in a single chip. The MultiVolt I/O pins interface directly to 5V peripherals while the core runs at 3.3V, eliminating level shifters on older industrial backplanes.
推荐
Instrumentation Front-End Logic
Test and measurement front-ends often require custom timing generators, counter arrays and trigger decoders that map cleanly onto an FPGA. The EPF6024ATC14A-4's 1960 LEs support moderate-density state machines and pulse-train logic, while the -4 speed grade delivers the toggle rates needed for 50-100 MHz instrumentation timing chains. The JTAG boundary-scan interface simplifies board-level test, allowing the FLEX 6000 to participate in bed-of-nails ICT patterns.
推荐
Glue Logic Replacement on Legacy Boards
Many late-1990s and early-2000s designs consolidated dozens of 74-series TTL glue chips onto a single FLEX 6000 device. The EPF6024ATC14A-4 retains that role in maintenance designs, replacing 7400-series decoders, latches and muxes with a single reprogrammable part. Because the TQ144 footprint is shared across the EPF6024ATC144 family, board rework is minimal and the same PCB can host -1, -2, -3 or -4 speed grades with no layout change.
推荐
Custom Peripheral Expansion
Embedded motherboards and single-board computers often need extra GPIO, UARTs, timers or PWM channels that the host processor lacks. The EPF6024ATC14A-4 attaches to the host bus as a memory-mapped peripheral, providing 1960 LEs of custom logic and dozens of MultiVolt I/O pins. The -4 speed grade ensures deterministic register access at typical 33-66 MHz host bus rates without wait-state insertion.
推荐
Parallel DSP Pre/Post-Processing
Modest DSP tasks such as FIR filtering, FFT pre-processing or sample-rate conversion fit comfortably in 1960 LEs. The EPF6024ATC14A-4's -4 speed grade supports multi-megasample per second data rates for audio, baseband or low-IF signal chains. Pairing the FLEX 6000 with an external ADC/DAC keeps the FPGA focused on parallel arithmetic, and the JTAG port enables in-the-lab coefficient reload for filter tuning.
推荐
推荐产品汇总
工程参考数据： EPF6024ATC14A-4 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | EPF6024ATC144-3 | EPF6024ATC144-2 | EPF6024ATC144-1 | EPF6016ATC144-3 | EPF6010ATC144-3 |
|---|---|---|---|---|---|---|
| Package | TQFP-144 (TQ144) | TQFP-144 (TQ144) - same | TQFP-144 (TQ144) - same | TQFP-144 (TQ144) - same | TQFP-144 (TQ144) - same | TQFP-144 (TQ144) - same |
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Logic Elements | 1960 | 1960 | 1960 | 1960 | ~1320 | ~880 |
| Speed Grade | -4 | -3 | -2 | -1 | -3 | -3 |
| Typical Gates | 24,000 | 24,000 | 24,000 | 24,000 | 16,000 | 10,000 |
| Core Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Lifecycle | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
| Configuration Memory | SRAM | SRAM | SRAM | SRAM | SRAM | SRAM |
关键差异点
- Fastest commercial speed grade in the FLEX 6000 family （对比 EPF6024ATC144-3)
- Higher logic capacity in the same footprint as smaller FLEX 6000 devices （对比 EPF6016ATC144-3)
- Pin-compatible with all FLEX 6000 -1/-2/-3/-4 grades on TQ144 （对比 EPF6024AFC256)
设计说明
Estimated: at 100 MHz internal toggle rate and 50% switching I/O, the EPF6024ATC14A-4 draws approximately 200-400 mA from the 3.3 V VCCINT rail. Place a 100 uF bulk capacitor plus four 0.1 uF ceramic decoupling caps (one per VCCINT/VCCIO pair) within 5 mm of the package. The MultiVolt I/O banks must each have their own VCCIO decoupling; mixing 5 V and 3.3 V banks on the same supply is not allowed.
The TQFP-144 footprint requires 0.5 mm pitch traces exiting the package; use 0.2 mm via-in-pad or dog-bone fan-out to inner layers. Keep all configuration pins (nCONFIG, nSTATUS, CONF_DONE, MSEL, JTAG TCK/TMS/TDI/TDO) away from high-speed switching nets and add 10 kohm pull-ups on nCONFIG and MSEL per the FLEX 6000 datasheet. A four-layer PCB with continuous ground plane is strongly recommended for designs above 50 MHz.
The FLEX 6000 SRAM configuration is volatile - the FPGA loses its bitstream on power-down. Always pair the EPF6024ATC14A-4 with a configuration device such as the EPC1441 (for bitstreams up to ~1 Mbit) or EPC2. Do not rely on JTAG-only programming in production; the JTAG chain is intended for prototype bring-up and board test. Also note that the part is obsolete and on the Altera/Intel PSG NRND/EOL list - qualify an alternative early.
合规信息
Compliance status not available in the verified web data. The EPF6024ATC14A-4 was originally released before RoHS became a widespread requirement; specific lead-free and RoHS compliance must be confirmed with the supplier. Not AEC-Q100 qualified - this part is not intended for automotive safety applications.
