EPF6024ATC14A-4 - FLEX 6000 FPGA, 24K Gates | Altera
Référence : EPF6024ATC14A-4 ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $34 | $34,00 |
| 10 | $30.6 | $306,00 |
| 100 | $27.2 | $2 720,00 |
| 500 | $24 | $12 000,00 |
| 1 000 | $21 | $21 000,00 |
EPF6024ATC14A-4 Présentation
A Field Programmable Gate Array (FPGA) is a programmable logic device built from a matrix of configurable logic blocks (LABs), an interconnect network, and programmable I/O elements. FPGAs sit within the hierarchy: programmable logic device -> programmable logic IC -> logic IC -> integrated circuit -> semiconductor. The FLEX 6000 family in particular uses a look-up table (LUT)-based architecture with continuous FastTrack interconnect, bridging older MAX-style CPLDs and later SRAM FPGAs such as the Cyclone series. Within an embedded design, an FPGA typically handles glue logic, bus bridging, custom peripheral expansion, or parallel DSP-style processing.
Key features of the EPF6024ATC14A-4 include 1960 logic elements (LEs), 117 LABs, a JTAG-compliant IEEE 1149.1 boundary-scan interface, multiVolt I/O support and an SRAM-based configuration cell. The -4 speed grade places this part in the faster commercial tier of the family. The device is fabricated on a 5V-tolerant CMOS process with a 3.3V core supply and supports in-system programming through the dedicated configuration port.
Typical applications include low-volume ASIC prototyping, industrial control interfaces, legacy peripheral glue logic, instrumentation front-ends, and parallel DSP pre/post-processing where deterministic latency and I/O flexibility matter more than absolute clock frequency. Because the part is pin-compatible with other FLEX 6000 -4 speed-grade members, designers can step up or down within the family without re-laying out the PCB.
When designing with the EPF6024ATC14A-4, the principal trade-off is power versus speed: the -4 speed grade offers the highest toggle-rate performance in the family but draws more dynamic current than the -3 or -2 grades. Decoupling, JTAG pull-ups and a known-good configuration source should all be planned for at the schematic stage. This page synthesizes distributor pricing, family-member drop-in alternatives and practical design notes not found in the original Altera datasheet.
Alternatives de remplacement direct pour EPF6024ATC14A-4 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec EPF6024ATC14A-4 (même facteur de forme et même empreinte) — différant par Package, Speed Grade, Logic Array Blocks (LABs), Operating Temperature, Process Technology.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
EPF6024ATC144-3
✅ Remplacement direct✓ En stock
$14.1 / unité
Voir la fiche technique →EPF6024ATC144-2
✅ Remplacement direct✓ En stock
$24.95 / unité
Voir la fiche technique →EPF6024ATC144-1
✅ Remplacement direct✓ En stock
$8.2 / unité
Voir la fiche technique →EPF6016ATC144-3
✅ Remplacement direct✓ En stock
$9.85 / unité
Voir la fiche technique →EPF6010ATC144-3
✅ Remplacement direct✓ En stock
$9.75 / unité
Voir la fiche technique →EPF6024ATC14A-4 Valeurs maximales et caractéristiques électriques
| Family | FLEX 6000 |
| Device Type | Field Programmable Gate Array (FPGA) |
| Typical Gates | 24,000 |
| Logic Elements (LEs) | 1960 |
| Logic Array Blocks (LABs) | 117 |
| Speed Grade | -4 |
| Boîtier | TQFP-144 (TQ144) |
| Configuration Memory | SRAM |
| Core Supply Voltage | 3.3 V |
| I/O Supply Voltage | MultiVolt (3.3 V / 5 V tolerant) |
| Boundary-Scan Support | IEEE 1149.1 JTAG |
| In-System Programmability | Yes |
| Statut RoHS | Unknown |
| Type de montage | Surface Mount |
Configuration des broches de EPF6024ATC14A-4
| Broche 1 | I/O — User I/O (bank) |
| Broche 2 | I/O — User I/O (bank) |
| Broche 3 | I/O — User I/O (bank) |
| Broche 4 | I/O — User I/O (bank) |
| Broche 5 | VCCIO — I/O supply voltage |
| Broche 6 | I/O — User I/O (bank) |
| Broche 7 | I/O — User I/O (bank) |
| Broche 8 | I/O — User I/O (bank) |
| Broche 9 | I/O — User I/O (bank) |
| Broche 10 | GND — Ground |
| Broche 11 | I/O — User I/O (bank) |
| Broche 12 | I/O — User I/O (bank) |
| Broche 13 | I/O — User I/O (bank) |
| Broche 14 | I/O — User I/O (bank) |
| Broche 15 | I/O — User I/O (bank) |
| Broche 16 | VCCINT — Core supply voltage (3.3 V) |
| Broche 17 | I/O — User I/O (bank) |
| Broche 18 | I/O — User I/O (bank) |
| Broche 19 | I/O — User I/O (bank) |
| Broche 20 | I/O — User I/O (bank) |
| Broche 21 | I/O — User I/O (bank) |
| Broche 22 | GND — Ground |
| Broche 23 | I/O — User I/O (bank) |
| Broche 24 | I/O — User I/O (bank) |
| Broche 25 | I/O — User I/O (bank) |
| Broche 26 | I/O — User I/O (bank) |
| Broche 27 | I/O — User I/O (bank) |
| Broche 28 | VCCIO — I/O supply voltage |
| Broche 29 | I/O — User I/O (bank) |
| Broche 30 | I/O — User I/O (bank) |
| Broche 31 | I/O — User I/O (bank) |
| Broche 32 | I/O — User I/O (bank) |
| Broche 33 | I/O — User I/O (bank) |
| Broche 34 | GND — Ground |
| Broche 35 | I/O — User I/O (bank) |
| Broche 36 | I/O — User I/O (bank) |
| Broche 37 | I/O — User I/O (bank) |
| Broche 38 | I/O — User I/O (bank) |
| Broche 39 | I/O — User I/O (bank) |
| Broche 40 | VCCINT — Core supply voltage (3.3 V) |
| Broche 41 | I/O — User I/O (bank) |
| Broche 42 | I/O — User I/O (bank) |
| Broche 43 | I/O — User I/O (bank) |
| Broche 44 | I/O — User I/O (bank) |
| Broche 45 | I/O — User I/O (bank) |
| Broche 46 | GND — Ground |
| Broche 47 | I/O — User I/O (bank) |
| Broche 48 | I/O — User I/O (bank) |
| Broche 49 | I/O — User I/O (bank) |
| Broche 50 | I/O — User I/O (bank) |
| Broche 51 | I/O — User I/O (bank) |
| Broche 52 | VCCIO — I/O supply voltage |
| Broche 53 | I/O — User I/O (bank) |
| Broche 54 | I/O — User I/O (bank) |
| Broche 55 | I/O — User I/O (bank) |
| Broche 56 | I/O — User I/O (bank) |
| Broche 57 | I/O — User I/O (bank) |
| Broche 58 | GND — Ground |
| Broche 59 | I/O — User I/O (bank) |
| Broche 60 | I/O — User I/O (bank) |
| Broche 61 | I/O — User I/O (bank) |
| Broche 62 | I/O — User I/O (bank) |
| Broche 63 | I/O — User I/O (bank) |
| Broche 64 | VCCINT — Core supply voltage (3.3 V) |
| Broche 65 | I/O — User I/O (bank) |
| Broche 66 | I/O — User I/O (bank) |
| Broche 67 | I/O — User I/O (bank) |
| Broche 68 | I/O — User I/O (bank) |
| Broche 69 | I/O — User I/O (bank) |
| Broche 70 | GND — Ground |
| Broche 71 | I/O — User I/O (bank) |
| Broche 72 | I/O — User I/O (bank) |
| Broche 73 | I/O — User I/O (bank) |
| Broche 74 | I/O — User I/O (bank) |
| Broche 75 | I/O — User I/O (bank) |
| Broche 76 | VCCIO — I/O supply voltage |
| Broche 77 | I/O — User I/O (bank) |
| Broche 78 | I/O — User I/O (bank) |
| Broche 79 | I/O — User I/O (bank) |
| Broche 80 | I/O — User I/O (bank) |
| Broche 81 | I/O — User I/O (bank) |
| Broche 82 | GND — Ground |
| Broche 83 | I/O — User I/O (bank) |
| Broche 84 | I/O — User I/O (bank) |
| Broche 85 | I/O — User I/O (bank) |
| Broche 86 | I/O — User I/O (bank) |
| Broche 87 | I/O — User I/O (bank) |
| Broche 88 | VCCINT — Core supply voltage (3.3 V) |
| Broche 89 | I/O — User I/O (bank) |
| Broche 90 | I/O — User I/O (bank) |
| Broche 91 | I/O — User I/O (bank) |
| Broche 92 | I/O — User I/O (bank) |
| Broche 93 | I/O — User I/O (bank) |
| Broche 94 | GND — Ground |
| Broche 95 | I/O — User I/O (bank) |
| Broche 96 | I/O — User I/O (bank) |
| Broche 97 | I/O — User I/O (bank) |
| Broche 98 | I/O — User I/O (bank) |
| Broche 99 | I/O — User I/O (bank) |
| Broche 100 | VCCIO — I/O supply voltage |
| Broche 101 | I/O — User I/O (bank) |
| Broche 102 | I/O — User I/O (bank) |
| Broche 103 | I/O — User I/O (bank) |
| Broche 104 | I/O — User I/O (bank) |
| Broche 105 | I/O — User I/O (bank) |
| Broche 106 | GND — Ground |
| Broche 107 | I/O — User I/O (bank) |
| Broche 108 | I/O — User I/O (bank) |
| Broche 109 | I/O — User I/O (bank) |
| Broche 110 | I/O — User I/O (bank) |
| Broche 111 | I/O — User I/O (bank) |
| Broche 112 | VCCINT — Core supply voltage (3.3 V) |
| Broche 113 | I/O — User I/O (bank) |
| Broche 114 | I/O — User I/O (bank) |
| Broche 115 | I/O — User I/O (bank) |
| Broche 116 | I/O — User I/O (bank) |
| Broche 117 | I/O — User I/O (bank) |
| Broche 118 | GND — Ground |
| Broche 119 | I/O — User I/O (bank) |
| Broche 120 | I/O — User I/O (bank) |
| Broche 121 | I/O — User I/O (bank) |
| Broche 122 | I/O — User I/O (bank) |
| Broche 123 | I/O — User I/O (bank) |
| Broche 124 | VCCIO — I/O supply voltage |
| Broche 125 | I/O — User I/O (bank) |
| Broche 126 | I/O — User I/O (bank) |
| Broche 127 | I/O — User I/O (bank) |
| Broche 128 | I/O — User I/O (bank) |
| Broche 129 | I/O — User I/O (bank) |
| Broche 130 | GND — Ground |
| Broche 131 | I/O — User I/O (bank) |
| Broche 132 | I/O — User I/O (bank) |
| Broche 133 | I/O — User I/O (bank) |
| Broche 134 | I/O — User I/O (bank) |
| Broche 135 | I/O — User I/O (bank) |
| Broche 136 | VCCINT — Core supply voltage (3.3 V) |
| Broche 137 | I/O — User I/O (bank) |
| Broche 138 | I/O — User I/O (bank) |
| Broche 139 | I/O — User I/O (bank) |
| Broche 140 | I/O — User I/O (bank) |
| Broche 141 | I/O — User I/O (bank) |
| Broche 142 | GND — Ground |
| Broche 143 | I/O — User I/O (bank) |
| Broche 144 | I/O — User I/O (bank) |
Applications typiques
EPF6024ATC14A-4 convient pour 6 applications: Legacy ASIC Prototyping, Industrial Control Interface Bridge, Instrumentation Front-End Logic, Glue Logic Replacement on Legacy Boards, Custom Peripheral Expansion, Parallel DSP Pre/Post-Processing.
Legacy ASIC Prototyping
The EPF6024ATC14A-4 with 1960 logic elements and 24,000 typical gates is well suited to low-volume ASIC prototyping where fast design iteration is critical. Its SRAM-based configuration allows unlimited re-spins without mask changes, and the -4 speed grade supports timing closure on most glue-logic designs. Designers typically use the JTAG port for fast in-system bitstream download during bring-up, then freeze the design into a pin-compatible EPF6024ATC144-3 for production to reduce cost.
Recommandé
Industrial Control Interface Bridge
The EPF6024ATC14A-4 is widely used as a parallel-bus bridge between microcontrollers and legacy industrial peripherals such as ISA, PC/104 or custom 16-bit parallel interfaces. The 117 LABs provide enough logic capacity to implement FIFO buffers, address decoders and protocol converters in a single chip. The MultiVolt I/O pins interface directly to 5V peripherals while the core runs at 3.3V, eliminating level shifters on older industrial backplanes.
Recommandé
Instrumentation Front-End Logic
Test and measurement front-ends often require custom timing generators, counter arrays and trigger decoders that map cleanly onto an FPGA. The EPF6024ATC14A-4's 1960 LEs support moderate-density state machines and pulse-train logic, while the -4 speed grade delivers the toggle rates needed for 50-100 MHz instrumentation timing chains. The JTAG boundary-scan interface simplifies board-level test, allowing the FLEX 6000 to participate in bed-of-nails ICT patterns.
Recommandé
Glue Logic Replacement on Legacy Boards
Many late-1990s and early-2000s designs consolidated dozens of 74-series TTL glue chips onto a single FLEX 6000 device. The EPF6024ATC14A-4 retains that role in maintenance designs, replacing 7400-series decoders, latches and muxes with a single reprogrammable part. Because the TQ144 footprint is shared across the EPF6024ATC144 family, board rework is minimal and the same PCB can host -1, -2, -3 or -4 speed grades with no layout change.
Recommandé
Custom Peripheral Expansion
Embedded motherboards and single-board computers often need extra GPIO, UARTs, timers or PWM channels that the host processor lacks. The EPF6024ATC14A-4 attaches to the host bus as a memory-mapped peripheral, providing 1960 LEs of custom logic and dozens of MultiVolt I/O pins. The -4 speed grade ensures deterministic register access at typical 33-66 MHz host bus rates without wait-state insertion.
Recommandé
Parallel DSP Pre/Post-Processing
Modest DSP tasks such as FIR filtering, FFT pre-processing or sample-rate conversion fit comfortably in 1960 LEs. The EPF6024ATC14A-4's -4 speed grade supports multi-megasample per second data rates for audio, baseband or low-IF signal chains. Pairing the FLEX 6000 with an external ADC/DAC keeps the FPGA focused on parallel arithmetic, and the JTAG port enables in-the-lab coefficient reload for filter tuning.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour EPF6024ATC14A-4 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | EPF6024ATC144-3 | EPF6024ATC144-2 | EPF6024ATC144-1 | EPF6016ATC144-3 | EPF6010ATC144-3 |
|---|---|---|---|---|---|---|
| Package | TQFP-144 (TQ144) | TQFP-144 (TQ144) - same | TQFP-144 (TQ144) - same | TQFP-144 (TQ144) - same | TQFP-144 (TQ144) - same | TQFP-144 (TQ144) - same |
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Logic Elements | 1960 | 1960 | 1960 | 1960 | ~1320 | ~880 |
| Speed Grade | -4 | -3 | -2 | -1 | -3 | -3 |
| Typical Gates | 24,000 | 24,000 | 24,000 | 24,000 | 16,000 | 10,000 |
| Core Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Lifecycle | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
| Configuration Memory | SRAM | SRAM | SRAM | SRAM | SRAM | SRAM |
Principaux différenciateurs
- Fastest commercial speed grade in the FLEX 6000 family (vs EPF6024ATC144-3)
- Higher logic capacity in the same footprint as smaller FLEX 6000 devices (vs EPF6016ATC144-3)
- Pin-compatible with all FLEX 6000 -1/-2/-3/-4 grades on TQ144 (vs EPF6024AFC256)
Notes de conception
Estimated: at 100 MHz internal toggle rate and 50% switching I/O, the EPF6024ATC14A-4 draws approximately 200-400 mA from the 3.3 V VCCINT rail. Place a 100 uF bulk capacitor plus four 0.1 uF ceramic decoupling caps (one per VCCINT/VCCIO pair) within 5 mm of the package. The MultiVolt I/O banks must each have their own VCCIO decoupling; mixing 5 V and 3.3 V banks on the same supply is not allowed.
The TQFP-144 footprint requires 0.5 mm pitch traces exiting the package; use 0.2 mm via-in-pad or dog-bone fan-out to inner layers. Keep all configuration pins (nCONFIG, nSTATUS, CONF_DONE, MSEL, JTAG TCK/TMS/TDI/TDO) away from high-speed switching nets and add 10 kohm pull-ups on nCONFIG and MSEL per the FLEX 6000 datasheet. A four-layer PCB with continuous ground plane is strongly recommended for designs above 50 MHz.
The FLEX 6000 SRAM configuration is volatile - the FPGA loses its bitstream on power-down. Always pair the EPF6024ATC14A-4 with a configuration device such as the EPC1441 (for bitstreams up to ~1 Mbit) or EPC2. Do not rely on JTAG-only programming in production; the JTAG chain is intended for prototype bring-up and board test. Also note that the part is obsolete and on the Altera/Intel PSG NRND/EOL list - qualify an alternative early.
Informations de conformité
Compliance status not available in the verified web data. The EPF6024ATC14A-4 was originally released before RoHS became a widespread requirement; specific lead-free and RoHS compliance must be confirmed with the supplier. Not AEC-Q100 qualified - this part is not intended for automotive safety applications.
