Renesas Electronics

ISL8484IRZ - 0.4 Ohm Dual SPDT Analog Switch | Renesas

料号: ISL8484IRZ ✓ 量产中
+1.65 V to +4.5 V Vdss 0.29 ohm Rds(on) 10-TDFN (3 x 3 mm) Package
最小起订量: 1 |

ISL8484IRZ 概述

Renesas ISL8484IRZ is a low-voltage dual SPDT analog switch with 0.4 ohm on-resistance, 2:1 multiplexing, and operation from +1.65 V to +4.5 V in a 10-lead TDFN package. The switch is designed for compact, low-voltage systems requiring low signal resistance, fast switching, and single-supply operation.

An analog switch is a semiconductor device that routes analog signals between input and output terminals under digital control. The SPDT configuration provides one common terminal and two switched terminals for each circuit, allowing two independent 2:1 selections. In the power-management hierarchy, this dual SPDT switch functions as a low-voltage interface IC for signal routing, test-point multiplexing, and programmable analog paths.

Key electrical characteristics include an on-resistance of 0.29 ohm at +4.3 V, 0.33 ohm at +3.0 V, and 0.55 ohm at +1.8 V. On-resistance matching between channels is 0.06 ohm, while flatness across the signal range is 0.03 ohm. At +4.3 V, turn-on time is 40 ns and turn-off time is 20 ns. The device also provides guaranteed break-before-make behavior.

The dual independent-switch architecture supports simultaneous routing of two analog signals. Its low-voltage supply range makes it suitable for battery-powered instrumentation, portable measurement systems, low-voltage test equipment, and mixed-signal interfaces. The manufacturer identifies the ISL8484 as a pin-compatible replacement for the MAX4684 and MAX4685, with particularly low on-resistance across its stated supply conditions.

Typical circuit roles include selecting between two sensors, connecting a test fixture to a measurement instrument, routing one of two sources into an amplifier, and multiplexing an analog control point. Because the switch operates from a single supply, system designers should confirm that every driven signal remains within the permitted input and output range during switching transitions.

For layout, route the common, switched, and control traces with short analog paths and maintain a continuous ground reference beneath the device. Place bypass capacitance near the supply pin and avoid routing high-impedance signals beneath digital control traces. These practices reduce parasitic distortion and coupling during the 40 ns switching transitions.

This product page combines the manufacturer specifications with a parameter-by-parameter comparison, verified pin-compatible alternatives, and practical routing guidance. Use the Renesas ISL8484 documentation as the authoritative source for the final pin-description table, footprint dimensions, and production release limits before releasing a PCB layout.

直接替换替代料: ISL8484IRZ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

MAX4684

✅ 直接替换
📦 10-TDFN (3 x 3 mm)
Pin-compatible replacement with the same dual SPDT function; on-resistance and switching-time differences require comparison against the MAX4684 datasheet

📋 参考替代料(不在目录中)

MAX4685

✅ 直接替换
📦 10-TDFN (3 x 3 mm)
Pin-compatible replacement with the same dual SPDT function; MAX4685-specific on-resistance and switching timing must be checked before substitution

📋 参考替代料(不在目录中)

ISL8484IRZ 最大额定值与电气特性

Switch Configuration Dual SPDT
Multiplexer Ratio 2:1
Number of Circuits 2 circuits
Supply Voltage Range +1.65 V to +4.5 V
On-Resistance at +4.3 V 0.29 ohm
On-Resistance at +3.0 V 0.33 ohm
On-Resistance at +1.8 V 0.55 ohm
Distributor Listed On-Resistance 500 mohm
On-Resistance Matching Between Channels 0.06 ohm
On-Resistance Flatness Across Signal Range 0.03 ohm
Turn-On Time at +4.3 V 40 ns
Turn-Off Time at +4.3 V 20 ns
Power Dissipation <0.45 microwatt
ESD HBM Rating >8 kV
Break-Before-Make Guaranteed
封装 10-TDFN (3 x 3 mm)
安装类型 Surface Mount
Termination Finish 100% matte tin plate with anneal, e3
RoHS 状态 Compliant

ISL8484IRZ 10-tdfn (3 x 3 mm) 引脚配置指南

ISL8484IRZ(10-tdfn (3 x 3 mm) 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

ISL8484IRZ 的 10-tdfn (3 x 3 mm) 封装引脚图

暂无详细引脚数据: ISL8484IRZ.

请参阅 数据手册 以查看完整引脚配置。

典型应用

ISL8484IRZ 适用于 6 应用s: Battery-Powered Sensor Multiplexing, Portable Test and Measurement, Programmable Analog Signal Routing, Low-Voltage Data Acquisition Front Ends, Industrial Control Signal Multiplexing, Audio and Communication Path Selection.

📱

Battery-Powered Sensor Multiplexing

The ISL8484IRZ suits low-voltage sensor-selection circuits because it operates from +1.65 V to +4.5 V and provides two independent 2:1 SPDT paths. Its on-resistance is 0.55 ohm at +1.8 V, 0.33 ohm at +3.0 V, and 0.29 ohm at +4.3 V, allowing one package to route two sensor outputs into a common analog front end. The 40 ns turn-on and 20 ns turn-off times support rapid source selection. Keep switched-node amplitudes within the specified signal range and account for path resistance when sizing amplifier input impedance.

🖥️

Portable Test and Measurement

The dual SPDT configuration of the ISL8484IRZ is useful in portable test equipment for connecting two stimulus sources or two measurement paths to shared circuitry. Its low 0.29 ohm on-resistance at +4.3 V minimizes series loss, while 0.03 ohm flatness across the signal range helps preserve amplitude relationships. At +4.3 V, the 40 ns turn-on and 20 ns turn-off characteristics enable rapid range or source changes. Design the surrounding front end to tolerate the selected path's voltage and impedance, and use controlled edge rates where leakage or parasitic capacitance matters.

🧩

Programmable Analog Signal Routing

ISL8484IRZ can implement two independently controlled analog routes in programmable front ends. The 2:1 topology allows either switched terminal to be connected to the common terminal, while the second circuit performs a separate selection. Its +1.65 V minimum supply supports low-energy logic domains, and guaranteed break-before-make behavior helps prevent overlapping switch states. For high-impedance nodes, account for switch leakage and parasitic capacitance, which are not specified in the manufacturer product summary. Place the routing device close to the controlled node and provide a low-impedance reference connection.

📊

Low-Voltage Data Acquisition Front Ends

The ISL8484IRZ can route two input channels into a compact data-acquisition front end where every stage operates below 4.5 V. Its low on-resistance reduces insertion loss compared with a resistive selector, while 0.06 ohm matching between channels supports balanced channel selection. Fast 40 ns turn-on and 20 ns turn-off operation can shorten acquisition dead time when control timing is accurate. Confirm the maximum signal excursion, off-state isolation, leakage, and bandwidth requirements for the selected acquisition architecture before placing the switch in a precision measurement path.

🏭

Industrial Control Signal Multiplexing

The dual SPDT ISL8484IRZ can multiplex two low-voltage control or diagnostic signals in compact industrial electronics. Its +1.65 V to +4.5 V operating range fits systems using modern low-voltage logic, and the 3 x 3 mm TDFN package preserves board area. Fast switching reduces interruption time, while guaranteed break-before-make behavior provides defined transition sequencing. Route the two analog paths away from motor-control switching nodes, use a solid ground plane, and verify the signal levels during all operating states to avoid transient overstress.

🎧

Audio and Communication Path Selection

ISL8484IRZ can select one of two low-level analog paths in portable audio or communication equipment operating near 1.8 V or 3.0 V. At +1.8 V, its on-resistance is 0.55 ohm, rising to 0.33 ohm at +3.0 V, so path loss should be included in the receiver's gain budget. The 40 ns turn-on and 20 ns turn-off times allow rapid source switching, but the application must also manage click, pop, or transient effects caused by the signal step. Maintain short traces and a continuous return path to limit coupling during transitions.

推荐产品汇总

MAX4684 Pin-compatible dual SPDT switching alternative 用于: Battery-Powered Sensor Multiplexing, Portable Test and Measurement, Programmable Analog Signal Routing, Low-Voltage Data Acquisition Front Ends, Industrial Control Signal Multiplexing, Audio and Communication Path Selection MAX4685 Pin-compatible dual SPDT switching alternative 用于: Battery-Powered Sensor Multiplexing, Portable Test and Measurement, Programmable Analog Signal Routing, Low-Voltage Data Acquisition Front Ends, Industrial Control Signal Multiplexing, Audio and Communication Path Selection
What is the operating voltage of ISL8484IRZ?
The Renesas ISL8484IRZ operates from a single supply of +1.65 V to +4.5 V. According to the Renesas ISL8484 product page, its on-resistance is specified at three supply points: 0.29 ohm at +4.3 V, 0.33 ohm at +3.0 V, and 0.55 ohm at +1.8 V. Confirm that the complete signal excursion and all control-pin levels remain inside the device's operating limits.
What are the key specifications of ISL8484IRZ that engineers should know?
The ISL8484IRZ is a dual 2:1 SPDT analog switch with a +1.65 V to +4.5 V supply range and 0.29 ohm on-resistance at +4.3 V. It also provides 40 ns turn-on time, 20 ns turn-off time, 0.06 ohm matching between channels, and 0.03 ohm on-resistance flatness. The Renesas product page identifies it as a pin-compatible replacement for the MAX4684 and MAX4685.
Where to download the ISL8484IRZ datasheet PDF?
The ISL8484IRZ datasheet is available through the Renesas ISL8484 product documentation and the linked manufacturer PDF mirror. According to the Renesas ISL8484 documentation, the device is an ultra-low-on-resistance, single-supply dual SPDT switch covering +1.65 V to +4.5 V. Use the manufacturer's pin-description table and package drawing when creating the PCB footprint.
Where can I find the ISL8484IRZ pinout?
The ISL8484IRZ pinout should be taken from the pin-description table in the Renesas ISL8484 manufacturer datasheet, including the exposed-pad connection and terminal assignments. The component is packaged in a 10-TDFN 3 x 3 mm package. Assign PCB tracks directly from that table and preserve the package orientation and exposed-pad geometry rather than inferring connections from block diagrams.
ISL8484IRZ vs MAX4684 - which is better for low-voltage signal routing?
The ISL8484IRZ is the preferred choice when the design needs the documented 0.29 ohm on-resistance at +4.3 V, 40 ns turn-on time, and 20 ns turn-off time. The Renesas product page identifies it as a pin-compatible replacement for the MAX4684. Final equivalence still depends on verifying the complete signal-range, control-logic, absolute-maximum, and footprint requirements for the intended circuit.
What is the difference between ISL8484IRZ and MAX4685?
The ISL8484IRZ is identified by Renesas as a pin-compatible replacement for the MAX4685. Its documented performance includes 0.29 ohm on-resistance at +4.3 V, 0.33 ohm at +3.0 V, and 0.55 ohm at +1.8 V, together with 40 ns turn-on and 20 ns turn-off times. Compare those ratings with the MAX4685 specification before replacing a part already designed into production.
When should I choose ISL8484IRZ over MAX4684?
Choose ISL8484IRZ when the switching path must maintain low resistance across a +1.65 V to +4.5 V supply range and fast transition performance is valuable. The Renesas device specifies 0.29 ohm at +4.3 V, 40 ns turn-on, 20 ns turn-off, and guaranteed break-before-make behavior. Retain MAX4684 only when its own electrical limits better match an unusual signal, control, or qualification requirement.
Is ISL8484IRZ suitable for battery-powered analog measurement?
The ISL8484IRZ is suitable for battery-powered measurement systems that operate within its +1.65 V to +4.5 V range. Its 0.55 ohm on-resistance at +1.8 V and 0.33 ohm at +3.0 V make it appropriate for routing moderate-impedance sensor and test signals. Evaluate path loss, injection current, and transient behavior across the battery's full operating range.
What can replace the ISL8484IRZ?
The MAX4684 and MAX4685 are the documented pin-compatible replacements for the ISL8484IRZ. Renesas explicitly identifies its low-on-resistance dual SPDT switch as pin-compatible with both devices. Before substitution, compare supply range, signal limits, on-resistance, switching time, control polarity, exposed-pad layout, and the manufacturer's absolute-maximum ratings for the specific implementation.
Can MAX4684 replace ISL8484IRZ without changing the PCB?
MAX4684 can be a PCB-compatible replacement candidate because Renesas identifies the ISL8484 as pin-compatible with the MAX4684. A production substitution still requires confirmation of package dimensions, exposed-pad treatment, control logic, and electrical limits. Use the manufacturer footprint and datasheet for both devices before approving the change.
What is the best Renesas equivalent for ISL8484IRZ?
The ISL8484IRZ itself is the orderable Renesas part for the requested 10-TDFN configuration, and the closest documented replacement family references are the MAX4684 and MAX4685. The ISL8484 is a dual SPDT switch with two independent 2:1 paths and specified low resistance. For an equivalent source, require the same pinout, supply range, signal limits, and footprint rather than relying only on the switching configuration.
How fast does the ISL8484IRZ switch?
At a supply of +4.3 V, the Renesas ISL8484 documentation specifies a 40 ns turn-on time and a 20 ns turn-off time. The device also provides guaranteed break-before-make operation, reducing the risk that two switched paths connect simultaneously during a transition. Account for this behavior when designing control timing around external instrumentation or sensitive signal sources.
Where can I buy ISL8484IRZ online?
Use the Request a Quote form on this page to ask for ISL8484IRZ availability, current lead time, and an order quote. The Renesas part is identified as an orderable 10-TDFN device, but current inventory and delivery timing can vary. The same form can also confirm minimum order quantity and the required reel or tray configuration.
What is the price of ISL8484IRZ?
The current ISL8484IRZ price is not stated on this page because quotations are handled directly through the Request a Quote form. Submit the required quantity, package shipping format, and target delivery location for a current offer. This also allows the supplier to confirm the exact ISL8484IRZ ordering code and its production availability.
What is the lead time and stock status for ISL8484IRZ?
Request the current ISL8484IRZ stock position, minimum order quantity, and lead time through the Request a Quote form on this page. The Renesas product listing supports an order request for the specific device, but it does not establish live inventory for a particular quantity. Providing the required quantity and shipment destination enables a more useful supply commitment.

工程参考数据: ISL8484IRZ ——对比、设计指导和合规信息。

选型指南

Choose the ISL8484IRZ when a design needs two independent 2:1 analog routes, a +1.65 V to +4.5 V single supply, and low path resistance in a 10-TDFN package. Its documented 0.29 ohm on-resistance at +4.3 V, 40 ns turn-on, 20 ns turn-off, and guaranteed break-before-make behavior are particularly useful in portable measurement and programmable routing systems. Consider MAX4684 or MAX4685 when an existing design uses that pin-compatible replacement platform and the current lot requirements favor the alternate source. Confirm each alternative's signal-range limits, off-state behavior, control thresholds, switching timing, exposed-pad requirements, and package drawings before approval. For new precision designs, compare insertion loss, leakage, bandwidth, and ground-return requirements rather than relying only on the 2:1 configuration.

与替代料对比

参数 本产品 MAX4684 MAX4685
Brand Renesas Electronics Analog Devices Analog Devices
Package 10-TDFN (3 x 3 mm) 10-TDFN (3 x 3 mm) 10-TDFN (3 x 3 mm)
Switch Configuration Dual SPDT Dual SPDT Dual SPDT
Multiplexer Ratio 2:1 2:1 2:1
Number of Circuits 2 circuits 2 circuits 2 circuits
Pin Compatibility Reference part Identified by Renesas as pin-compatible replacement Identified by Renesas as pin-compatible replacement

关键差异点

  • Low on-resistance across the stated supply range (对比 MAX4684)
  • Fast complementary switching characteristics (对比 MAX4685)
  • Defined transition behavior (对比 MAX4684)

设计说明

Place the ISL8484IRZ close to the signal source and destination it selects so that the switched paths remain short. Keep the common-node traces away from digital control and clock lines, and route each control input over a continuous ground reference. The 40 ns turn-on and 20 ns turn-off characteristics can expose parasitic coupling, so minimize loop area around the analog nodes.

Do not treat the +1.65 V to +4.5 V supply range as permission for arbitrary signal amplitudes. Check the maximum switched voltage, control-pin thresholds, and absolute-maximum limits in the manufacturer documentation before applying a signal. Also include the selected path resistance in the system gain calculation, especially for the 0.55 ohm on-resistance condition at +1.8 V.

Decouple the supply connection with the capacitance and placement specified by the Renesas application guidance. Keep the supply loop compact because fast switching current can create voltage disturbance along an extended supply trace. Use the device's guaranteed break-before-make behavior for sequencing, but still provide adequate time between control commands when driving sensitive analog nodes.

合规信息

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Yes
无卤
Unknown
冲突矿物
Unknown

The manufacturer documentation states that the Pb-free plastic package uses special Pb-free materials, 100% matte tin plate, anneal, and an e3 termination finish that is RoHS compliant.

相关搜索

ISL8484IRZ datasheet ISL8484IRZ pinout ISL8484IRZ datasheet pdf ISL8484IRZ equivalent ISL8484IRZ replacement ISL8484IRZ cross reference ISL8484IRZ vs MAX4684 ISL8484IRZ vs MAX4685 Renesas ISL8484IRZ ISL8484IRZ 10-TDFN pinout ISL8484IRZ low voltage switch ISL8484IRZ battery powered sensor ISL8484IRZ price ISL8484IRZ stock ISL8484 application circuit

相关元器件 & 术语

Renesas Electronics ISL8484IRZ ISL8484 MAX4684 MAX4685 dual SPDT analog switch 2:1 analog multiplexer SPDT analog switch interface IC semiconductor on-resistance switching time break-before-make single-supply operation 10-TDFN package 3 x 3 mm package surface-mount device RoHS Pb-free e3 termination finish ESD HBM low-voltage signal routing battery-powered measurement test and measurement
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情