Microchip Technology

KSZ8041TLI-S - 10/100 Ethernet PHY | Microchip | TQFP-48

料号: KSZ8041TLI-S ✓ 量产中
Single supply Vdss 48-pin TQFP, 7 x 7 mm Package
最小起订量: 1 |

KSZ8041TLI-S 概述

The Microchip Technology KSZ8041TLI-S is a single-supply 10BASE-T and 100BASE-TX Ethernet physical-layer transceiver with MII, RMII, and SMII interfaces, packaged in a 48-pin TQFP measuring 7 x 7 mm. It supports 10 Mb/s and 100 Mb/s Ethernet connectivity and incorporates automatic MDI/MDI-X handling for link partner compatibility.

An Ethernet physical-layer transceiver, commonly called an Ethernet PHY, converts digital data into the electrical signaling used by 10BASE-T and 100BASE-TX networks. It belongs to the network interface controller and Ethernet transceiver hierarchy, operating between a network media-access controller and the transformer-coupled Ethernet line. The KSZ8041 supports MII, RMII, and SMII host interfaces, allowing integration with controllers operating in parallel, reduced-pin, or source-synchronous signaling configurations.

The principal benefits of the KSZ8041TLI-S are its 10/100 Mb/s dual-rate support, three digital host-interface choices, single-supply operation, and mixed-signal design. The manufacturer describes the mixed-signal implementation as extending signaling distance while reducing power consumption. Automatic MDI/MDI-X support also removes the need to configure transmit and receive pairs manually when either straight-through or crossover cabling is used.

The device integrates the analog PHY circuitry and digital host-interface functions required for a compact Ethernet front end. Its 48-pin TQFP-48 package provides separate interface and power-related connections on a conventional surface-mount footprint. Because it is a single transceiver, it does not by itself provide two independent copper ports, multi-port switching, or packet processing. Those functions belong to the network controller, switch, or higher-level system around the PHY.

Typical uses include embedded control systems, industrial automation equipment, communications modules, print systems, and compact network interfaces that require 10BASE-T or 100BASE-TX connectivity. The MII interface supports designs with a broad parallel signal set, RMII reduces host-side pin requirements, and SMII supports systems configured for source-synchronous signaling. Selection should account for the host controller's supported physical interface and the electrical requirements of the magnetic network interface.

Place the PHY, its supporting passive components, and the Ethernet magnetic device according to the manufacturer's reference layout. Keep high-speed host-interface traces short and controlled, provide the specified supply and decoupling arrangement, and account for magnetics and connector placement when defining the Ethernet channel. Verify signal integrity, return loss, insertion loss, and radiated emissions over the intended network interface before production release.

This page organizes the official product information, package details, replacement comparisons, interface selection guidance, and practical integration notes into one engineering-focused resource. It also distinguishes confirmed drop-in options from functional alternatives so that footprint, interface, and parameter compatibility can be checked before a PCB substitution is approved.

直接替换替代料: KSZ8041TLI-S ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: KSZ8041TLI-S (相同外形与封装尺寸) ——差异在于 Package, Device Type, Host Interface, Supply Architecture, Supported Data Rates.

Microchip Technology
Package: 48-pin TQFP
Host Interface: MII, RMII, and SMII
对比 KSZ8041TLI-S →
Microchip Technology
Package: 48-LQFP
Host Interface: Full MII
对比 KSZ8041TLI-S →
Microchip Technology
Package: 48-TQFP (7 x 7 mm)
Device Type: Ethernet interface IC / physical-layer transceiver
Supply Architecture: Single-supply
对比 KSZ8041TLI-S →
Microchip Technology
Package: 48-TQFP, 7 mm x 7 mm
Device Type: 10/100BASE-TX Ethernet physical-layer transceiver
Host Interface: MII, RMII, and SMII
对比 KSZ8041TLI-S →
Microchip Technology
Supported Data Rates: 10 Mbps and 100 Mbps
对比 KSZ8041TLI-S →

KSZ8041TLI

✅ 直接替换
Microchip Technology
📦 TQFP-48 (7 x 7 mm)
10Base-T/100Base-TX Ethernet physical-layer transceiver · 10 Mbps and 100 Mbps · 1 channel · MII, RMII, and SMII · Single supply · 3.3 V · 3.135 V to 3.465 V · IEEE 802.3 and IEEE 802.3u

✓ 有现货

$3.6094 / 个

查看数据手册 →

KSZ8041FTLI

✅ 直接替换
Microchip Technology
📦 TQFP-48 (7 x 7 mm)
10/100 Ethernet physical-layer transceiver · 10Base-T and 100Base-TX · MII, RMII, and SMII · Single supply · HP Auto-MDI/MDI-X · 48-pin TQFP · 7 mm x 7 mm · -40 C to +85 C

联系询价

查看数据手册 →

KSZ8041TL

✅ 直接替换
Microchip Technology
📦 TQFP-48 (7 x 7 mm)
10BASE-T/100BASE-TX Ethernet physical-layer transceiver · 10 Mb/s and 100 Mb/s · MII, RMII, and SMII · Single-supply · 10BASE-T and 100BASE-TX · Yes; intended to extend signaling distance while reducing power consumption · HP Auto MDI/MDIX · INTRP on pin 32; optional PHY-register status-update signal

联系询价

查看数据手册 →

KSZ8041MLL

✅ 直接替换
Microchip Technology
📦 TQFP-48 (7 x 7 mm)
10 Mb/s and 100 Mb/s · 10BASE-T and 100BASE-TX · Full MII · 3.3 V · Single supply · 1 · 1 Ethernet port · 48-LQFP

联系询价

查看数据手册 →

KSZ8041TLI-S 规格参数

Device Type 10BASE-T/100BASE-TX Ethernet physical-layer transceiver
Supported Data Rates 10 Mb/s and 100 Mb/s
Supply Architecture Single supply
Host Interface Options MII, RMII, and SMII
Auto MDI/MDI-X Supported
Process Technology Low-power CMOS mixed-signal process
Ethernet Standard IEEE 802.3u
Number of Transceivers 1
封装 48-pin TQFP, 7 x 7 mm
安装类型 Surface mount
RoHS 状态 Compliant
REACH Status Compliant
Automotive Network Support HP Auto MDI/MDI-X support

KSZ8041TLI-S 48-pin tqfp, 7 x 7 mm 引脚配置指南

KSZ8041TLI-S(48-pin tqfp, 7 x 7 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

KSZ8041TLI-S 的 48-pin tqfp, 7 x 7 mm 封装引脚图

暂无详细引脚数据: KSZ8041TLI-S.

请参阅 数据手册 以查看完整引脚配置。

典型应用

KSZ8041TLI-S 适用于 6 应用s: Embedded Ethernet Control Systems, Industrial Automation Equipment, Printers and Networked Peripherals, Communications Gateways, Networked Sensor and Monitoring Equipment, Communications and Networking Modules.

🖥️

Embedded Ethernet Control Systems

The KSZ8041TLI-S fits embedded control systems that need a compact copper-Ethernet front end at 10 Mb/s or 100 Mb/s. Its MII interface supports a conventional parallel controller connection, while RMII offers a lower pin-count option for compact processors and programmable controllers. The single-supply architecture and 48-pin TQFP package simplify board planning compared with implementing discrete analog magnetics drivers and receivers. Its automatic MDI/MDI-X handling also lets the system operate with either straight-through or crossover cabling without a manual TX/RX pair configuration.

🏭

Industrial Automation Equipment

The KSZ8041TLI-S is appropriate for industrial automation controllers, sensor gateways, and remote I/O equipment requiring 10BASE-T or 100BASE-TX connectivity. The RMII interface can reduce host-side connections when the connected controller supports it, while MII provides a broadly established parallel interface. The manufacturer's mixed-signal design is intended to reduce power consumption and extend signaling distance, supporting compact industrial equipment where Ethernet replaces a more complex fieldbus. Final qualification should confirm the required temperature grade and operating-voltage limits.

🖥️

Printers and Networked Peripherals

The KSZ8041TLI-S can provide the Ethernet physical layer in a network printer, scanner, or controller peripheral. A 100 Mb/s PHY supports faster transfers than a 10 Mb/s-only implementation while retaining support for legacy 10BASE-T links. The selectable MII, RMII, and SMII interfaces let the designer align the physical layer with the embedded host architecture. Automatic MDI/MDI-X operation simplifies installation by accommodating common straight-through and crossover cable conventions without manual pair swapping.

🌐

Communications Gateways

The KSZ8041TLI-S suits gateways that bridge a local embedded processor to a 10/100 Ethernet network. RMII is useful when minimizing host-side wiring is a priority, while MII offers a simple option for controllers with a dedicated parallel Ethernet interface. The PHY's single-port architecture suits a basic uplink rather than a managed multiport switch. Because the KSZ8041TLI-S handles physical-layer signaling only, the system designer must allocate MAC, protocol, security, and network-management functions to the host processor or companion controller.

🧩

Networked Sensor and Monitoring Equipment

The KSZ8041TLI-S can provide wired-network connectivity for environmental monitors, building controllers, and remote sensing nodes that need reliable 10BASE-T or 100BASE-TX operation. Its low-power mixed-signal implementation is relevant to energy-conscious embedded equipment, while automatic MDI/MDI-X improves installation flexibility. RMII may help minimize the host connection when the sensor controller includes that interface. The Ethernet channel still requires an appropriate magnetic device and careful layout to preserve signal integrity between the transceiver and connector.

🌐

Communications and Networking Modules

The KSZ8041TLI-S is suitable for compact communications modules that expose a 10/100 Ethernet port to a host processor or communication controller. Its three host-interface options allow the module designer to select RMII for pin reduction, MII for conventional parallel signaling, or SMII for a compatible source-synchronous architecture. The 7 x 7 mm TQFP package supports dense module construction without requiring a fine-pitch BGA footprint. Before layout release, follow the manufacturer reference placement for the PHY, decoupling, magnetic device, and Ethernet connector.

What are the key specifications of KSZ8041TLI-S that engineers should know?
The KSZ8041TLI-S is a single-supply 10BASE-T/100BASE-TX Ethernet PHY supporting 10 Mb/s and 100 Mb/s operation through MII, RMII, or SMII host interfaces. According to the Microchip Technology product page, it uses a mixed-signal design intended to extend signaling distance and reduce power consumption. The device also supports automatic MDI/MDI-X and is offered in a 48-pin TQFP package measuring 7 x 7 mm.
What is the KSZ8041TLI-S?
The KSZ8041TLI-S is a single-port Ethernet physical-layer transceiver for 10BASE-T and 100BASE-TX networks. According to the Microchip Technology product page, it provides MII, RMII, and SMII interfaces for communicating with a network controller. Its mixed-signal design extends signaling distance while reducing power consumption, and its automatic MDI/MDI-X function supports both straight-through and crossover cable arrangements.
Which Ethernet speeds does KSZ8041TLI-S support?
The KSZ8041TLI-S supports both 10 Mb/s 10BASE-T and 100 Mb/s 100BASE-TX Ethernet operation. The manufacturer identifies the KSZ8041 family as a single-supply 10Base-T/100Base-TX physical-layer transceiver. The host controller determines the negotiated speed, while the PHY provides the corresponding physical signaling over the transformer-coupled copper connection.
Where can I download the KSZ8041TLI-S datasheet PDF?
The KSZ8041TLI-S datasheet and supporting documentation are available from the official Microchip Technology KSZ8041 product page. The page provides the manufacturer document set needed to review electrical characteristics, interfaces, application circuits, and package information. Use the manufacturer PDF for final schematic, layout, and production decisions rather than relying on a distributor summary.
Where can I find the KSZ8041TLI-S pinout?
The authoritative KSZ8041TLI-S pinout appears in the manufacturer KSZ8041 datasheet and its pin-description table. Use that table when assigning the 48 TQFP leads and checking exposed-pad, supply, ground, clock, data, and analog-network connections. The package is a 48-pin TQFP measuring 7 x 7 mm, so its land pattern must be matched to the manufacturer drawing before PCB release.
What is the best drop-in replacement for KSZ8041TLI-S?
The KSZ8041TLI is the closest confirmed same-package replacement candidate for the KSZ8041TLI-S because both are listed in the 48-pin TQFP category and implement the same KSZ8041 Ethernet PHY function. Before substitution, verify the ordering suffix, temperature grade, electrical limits, and pin description in the manufacturer documentation. A footprint match alone does not confirm qualification for every production requirement.
Can KSZ8041TLI replace KSZ8041TLI-S?
The KSZ8041TLI may serve as a footprint-compatible candidate for the KSZ8041TLI-S because comparison records list both as 48-pin TQFP Ethernet PHYs. Confirm that the selected ordering code has the required temperature range, compliance status, electrical ratings, and active lifecycle status for the finished product. Also verify every pin against the current manufacturer datasheet before approving a production substitution.
KSZ8041TLI-S vs KSZ8041FTLI - which is better for an embedded controller?
The KSZ8041TLI-S and KSZ8041FTLI are both associated with the same 48-pin TQFP Ethernet PHY family and are listed as having identical primary performance profiles. The KSZ8041TLI-S is preferable when its specific ordering code matches the required environmental and compliance conditions. Otherwise, select between the alternatives by checking the exact ordering suffix, temperature grade, and manufacturer lifecycle information.
When should I choose KSZ8041TLI-S over KSZ8041TLI?
Choose the KSZ8041TLI-S when it is the exact ordering code approved for the board's electrical, environmental, and compliance requirements. The KSZ8041TLI can be considered when its suffix-specific conditions are acceptable and the manufacturer documentation confirms the same pin arrangement and functional requirements. Because ordering suffixes can encode meaningful differences, base the final choice on the manufacturer part information rather than the base-family designation alone.
Is the KSZ8041TLI-S suitable for industrial Ethernet equipment?
The KSZ8041TLI-S is functionally suitable for 10/100 Ethernet links in embedded and industrial-oriented products because it provides 10BASE-T and 100BASE-TX operation, MII, RMII, and SMII interfaces, and automatic MDI/MDI-X. Industrial suitability also depends on the exact temperature grade, operating-voltage limits, certification requirements, and environmental qualification of the selected ordering code. Confirm those conditions in the manufacturer documentation.
What are the main design considerations for the KSZ8041TLI-S Ethernet interface?
Design the KSZ8041TLI-S interface around the manufacturer reference layout, including short controlled-impedance host traces, proper supply decoupling, and the specified Ethernet magnetic device. Pay particular attention to the relationship among the PHY, magnetics, RJ45 connector, and return path because those elements determine channel performance. Validate insertion loss, return loss, impedance, and emissions over the intended Ethernet channel before production.
Where can I buy KSZ8041TLI-S online?
Use the Request a Quote form on this page to inquire about KSZ8041TLI-S availability, current lead time, and order quantities. The form keeps the request connected to the exact MPN and packaging information. Request written confirmation of lifecycle status and shipment configuration before placing a production order, especially when scheduled maintenance or long-term sourcing is required.
What is the price of KSZ8041TLI-S?
Request current KSZ8041TLI-S pricing through the Request a Quote form on this page. The form provides a direct route for quantity-based commercial review without embedding a figure that may quickly become outdated. Include the required order quantity, shipment destination, and preferred packaging in the request so the supplier can confirm the applicable commercial terms.
What is the lead time for KSZ8041TLI-S?
Request the current KSZ8041TLI-S lead time through the Request a Quote form on this page. Lead time can vary with order quantity, manufacturing status, and shipment destination, so it should be confirmed for the planned demand. Ask for the estimated schedule and available quantity in the same inquiry to support production planning.
Is KSZ8041TLI-S in stock?
Submit the KSZ8041TLI-S MPN through the Request a Quote form on this page to request current stock confirmation. Because inventory changes continuously, availability should be checked for the exact ordering code and package required by the assembly. The quote response is the appropriate place to confirm available quantity, lead time, and shipment configuration.
What can replace KSZ8041TLI-S?
Confirmed replacement candidates for the KSZ8041TLI-S include the KSZ8041TLI, KSZ8041FTLI, KSZ8041TL, and KSZ8041MLL, each associated with the same 48-pin TQFP KSZ8041 family. The KSZ8041TLI is the closest suffix-level candidate. For every proposed replacement, verify the numbered pin list, electrical limits, environmental grade, and ordering-suffix requirements before treating it as a production drop-in replacement.

工程参考数据: KSZ8041TLI-S ——对比、设计指导和合规信息。

选型指南

Choose the KSZ8041TLI-S when the design requires a single 10/100 Ethernet PHY with MII, RMII, or SMII connectivity, automatic MDI/MDI-X operation, and a 48-pin TQFP footprint. Select the KSZ8041TLI when its ordering-suffix requirements are preferable and it is the approved alternate for the same board revision. The KSZ8041FTLI is a strong footprint candidate because comparison records identify identical primary performance profiles, but production approval still requires suffix-specific review. Consider the KSZ8041TL or KSZ8041MLL when their individual environmental, ordering, or sourcing conditions better fit the product. None of these choices adds a second Ethernet port or higher-than-100 Mb/s operation. For any substitution, compare the manufacturer pin table, electrical limits, temperature grade, host-interface mode, and lifecycle status rather than relying only on the shared TQFP-48 footprint.

与替代料对比

参数 本产品 KSZ8041TLI KSZ8041FTLI KSZ8041TL KSZ8041MLL
Package TQFP-48 (7 x 7 mm) TQFP-48 (7 x 7 mm) TQFP-48 (7 x 7 mm) TQFP-48 (7 x 7 mm) TQFP-48 (7 x 7 mm)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Device Type 10BASE-T/100BASE-TX Ethernet PHY 10BASE-T/100BASE-TX Ethernet PHY 10BASE-T/100BASE-TX Ethernet PHY 10BASE-T/100BASE-TX Ethernet PHY 10BASE-T/100BASE-TX Ethernet PHY
Supported Data Rates 10 Mb/s and 100 Mb/s 10 Mb/s and 100 Mb/s 10 Mb/s and 100 Mb/s 10 Mb/s and 100 Mb/s 10 Mb/s and 100 Mb/s
Host Interfaces MII, RMII, and SMII MII, RMII, and SMII MII, RMII, and SMII MII, RMII, and SMII MII, RMII, and SMII
Supply Architecture Single supply Single supply Single supply Single supply Single supply
Auto MDI/MDI-X Supported Supported Supported Supported Supported

关键差异点

  • Three host-interface choices in one Ethernet PHY (对比 KSZ8041TLI)
  • Same-package reuse across KSZ8041 ordering variants (对比 KSZ8041FTLI)
  • Compact surface-mount implementation (对比 KSZ8041MLL)
  • Automatic copper-pair handling (对比 KSZ8041TL)

设计说明

Use the manufacturer reference layout for the PHY, Ethernet magnetic device, and connector as one signal-chain structure. Preserve the specified component placement and keep the high-frequency analog network and digital host-interface sections organized according to the datasheet guidance. Place decoupling components at their designated power pins with short current paths. Confirm the final land pattern against the 48-pin TQFP drawing and the selected magnetic-device footprint before fabrication.

Validate the complete Ethernet channel from the KSZ8041TLI-S through the magnetic device to the RJ45 connector. Check insertion loss, return loss, impedance, isolation, and radiated emissions across the frequencies used by 10BASE-T and 100BASE-TX. Because the package contains both digital host signals and analog line-side circuitry, mismatched reference planes or long loops around the network interface can degrade performance even when the schematic is correct.

Do not select a replacement solely because its package is labeled TQFP-48. Confirm the ordered MPN, numbered pin assignments, operating-voltage limits, temperature range, Ethernet interface configuration, and regulatory requirements against the manufacturer documentation. The KSZ8041TLI, KSZ8041FTLI, KSZ8041TL, and KSZ8041MLL share the family footprint, but suffix-specific conditions can still affect production suitability. Document the engineering approval before changing the released BOM.

Follow the manufacturer's supply, decoupling, and power-sequencing recommendations exactly. The KSZ8041TLI-S uses a single-supply architecture, but the host controller, Ethernet magnetics, and PHY can still require coordinated rail sequencing during startup and shutdown. Test brownout behavior, rail ramp timing, and current consumption in the complete system rather than evaluating the PHY in isolation.

合规信息

RoHS
Compliant
REACH
Compliant
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

RoHS and REACH compliance are identified for the KSZ8041TLI-S and the compared KSZ8041TLI and KSZ8041FTLI variants. Automotive-grade qualification, lead-free construction, halogen-free status, and conflict-minerals status require confirmation for the exact selected ordering code.

相关搜索

ksz8041tl datasheet KSZ8041TLI-S datasheet KSZ8041TLI-S datasheet pdf KSZ8041TLI-S pinout KSZ8041TLI-S TQFP-48 KSZ8041TLI-S Ethernet PHY KSZ8041TLI-S MII RMII SMII KSZ8041TLI-S replacement KSZ8041TLI-S drop-in equivalent KSZ8041TLI-S vs KSZ8041TLI KSZ8041TLI-S price KSZ8041TLI-S stock Microchip KSZ8041TLI-S KSZ8041TLI-S industrial Ethernet

相关元器件 & 术语

Microchip Technology KSZ8041TLI-S KSZ8041TLI KSZ8041FTLI KSZ8041TL KSZ8041MLL Ethernet PHY physical-layer transceiver Ethernet transceiver network interface controller 10BASE-T 100BASE-TX MII RMII SMII MDI/MDI-X IEEE 802.3u TQFP-48 surface mount mixed-signal design low-power CMOS single-supply architecture RoHS REACH
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情