Microchip Technology

LAN9255-I/ZMX020 - 2/3-Port EtherCAT Controller | Microchip

料号: LAN9255-I/ZMX020 ✓ 量产中
128-pin TQFP, 14 x 14 mm Package 20 MHz Speed
最小起订量: 1 |

LAN9255-I/ZMX020 概述

The Microchip Technology LAN9255-I/ZMX020 is a 2/3-port EtherCAT device controller with dual integrated 100BASE-TX PHYs and a SAM E53J 32-bit Arm Cortex-M4F microcontroller, housed in a 128-pin TQFP package measuring 14 x 14 mm. The controller operates at 100 Mbps per Ethernet port and combines EtherCAT processing, Ethernet physical-layer interfaces, and application-controller functions in one system-in-package device.

An EtherCAT device controller is an integrated semiconductor used in industrial Ethernet automation systems to manage EtherCAT communication and connected I/O devices. Its internal architecture combines an EtherCAT processing subsystem, Ethernet physical-layer transceivers, and a microcontroller. This integration reduces the number of discrete interface components required around the controller and provides a platform for motion-control, robotics, machine-interconnect, and distributed automation equipment.

The LAN9255-I/ZMX020 provides two integrated full-duplex 100BASE-TX PHYs, an Arm Cortex-M4F-based application subsystem, 20 MHz MCU operation, and 1.024 MB of SRAM. Its EtherCAT interface, dual-PHY arrangement, RMII interface, and USB 2.0 interface support use in embedded EtherCAT slave equipment. The 128-pin TQFP package provides the pin count required for the parallel processor, memory, Ethernet, clock, and power connections of the integrated system-in-package.

The Microchip datasheet 00003646B identifies the LAN9255 as a system-in-package combining the LAN9253 2/3-port EtherCAT device controller, two integrated Ethernet PHYs, and the SAM E53J Arm Cortex-M4F MCU. Each PHY supports full-duplex 100BASE-TX operation at 100 Mbps. The integrated microcontroller provides application-specific processing alongside real-time EtherCAT communication handling.

Typical uses include EtherCAT slave modules, distributed I/O controllers, servo and stepper-motion interfaces, industrial sensor gateways, machine vision equipment, and compact robotic control nodes. The two-PHY arrangement is particularly useful where a device must bridge or connect multiple 100BASE-TX Ethernet segments while executing local control functions.

PCB design must account for 128 pins, Ethernet magnetics or coupling requirements, supply decoupling, clock integrity, and high-speed differential routing. Magnetic isolation or suitable PHY coupling components should be selected according to the manufacturer reference design, while differential pairs should remain continuously referenced to a solid ground plane. Review the full pin-description table in the manufacturer datasheet before assigning PCB nets.

This page organizes the controller’s verified architecture, package details, purchasing information, drop-in options, and application guidance. The comparison section distinguishes temperature-grade and ordering-code variants, while the engineering notes focus on Ethernet signal integrity, power implementation, and firmware integration for EtherCAT equipment.

直接替换替代料: LAN9255-I/ZMX020 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: LAN9255-I/ZMX020 (相同外形与封装尺寸) ——差异在于 Ethernet Speed, Integrated MCU, Package.

Microchip Technology
Ethernet Speed: 100 Mbps full-duplex
Integrated MCU: SAM E53J ARM Cortex-M4F
Package: 128-TQFP-EP (14x14 mm)

LAN9255/ZMX020

✅ 直接替换
📦 128-TQFP (14x14)
Same 128-TQFP footprint and stated EtherCAT, dual-PHY, Cortex-M4F, and 100BASE-TX ratings; 0% difference in the listed functional parameters, with only the ordering-grade suffix changed.

📋 参考替代料(不在目录中)

LAN9255-V/ZMX020

✅ 直接替换
Microchip Technology
📦 128-TQFP (14x14)
EtherCAT Slave Controller with integrated MCU · EtherCAT (IEC 61158) · 2/3 ports (EtherCAT) · Dual integrated 100BASE-TX · 100 Mbps full-duplex · SAM E53J ARM Cortex-M4F · 32-bit ARM Cortex-M4F with FPU · 1024 KB

联系询价

查看数据手册 →

LAN9255-I/ZMX020 规格参数

Device Type 2/3-port EtherCAT device controller with integrated MCU
Integrated MCU SAM E53J 32-bit Arm Cortex-M4F
MCU Clock 20 MHz
Integrated SRAM 1.024 MB
Ethernet Standard IEEE 802.3
Ethernet Speed 100 Mbps
Physical Layer Dual 100BASE-TX PHYs
PHY Duplex Mode Full duplex
EtherCAT Port Configuration 2/3 ports
接口 RMII and USB 2.0
封装 128-pin TQFP, 14 x 14 mm
安装类型 Surface mount
Architecture System-in-package
Ethernet PHY Count 2 integrated PHYs
Supported Ethernet Rate 100BASE-TX at 100 Mbps
Processor Architecture 32-bit Arm Cortex-M4F

LAN9255-I/ZMX020 128-pin tqfp, 14 x 14 mm 引脚配置指南

LAN9255-I/ZMX020(128-pin tqfp, 14 x 14 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

LAN9255-I/ZMX020 的 128-pin tqfp, 14 x 14 mm 封装引脚图

暂无详细引脚数据: LAN9255-I/ZMX020.

请参阅 数据手册 以查看完整引脚配置。

典型应用

LAN9255-I/ZMX020 适用于 6 应用s: Industrial EtherCAT I/O Modules, Servo and Stepper-Motion Interfaces, Robotic Control Nodes, Machine-Vision Ethernet Gateways, Distributed Sensor Hubs, Compact EtherCAT Test Equipment.

🏭

Industrial EtherCAT I/O Modules

The LAN9255-I/ZMX020 fits compact EtherCAT slave modules because it combines a 2/3-port EtherCAT controller with two full-duplex 100BASE-TX PHYs and an application MCU in one package. The Cortex-M4F subsystem can execute local acquisition, diagnostics, and control functions while the EtherCAT section manages cyclic fieldbus traffic. Its 1.024 MB of integrated SRAM reduces external memory requirements compared with a discrete processor-and-PHY architecture. In an I/O module, the controller can connect local inputs and outputs, forward line signals through the second PHY, and provide a single Ethernet interface to the EtherCAT master. Designers should follow the manufacturer reference schematic for magnetics, isolation, termination, and decoupling rather than treating the integrated PHYs as zero-component Ethernet interfaces.

⚡

Servo and Stepper-Motion Interfaces

The LAN9255-I/ZMX020 is appropriate for distributed servo and stepper-motion interfaces that need EtherCAT communication and local control processing in a compact controller. Its 20 MHz Arm Cortex-M4F MCU provides the application-processing foundation, while the dedicated EtherCAT controller handles fieldbus operation independently from the user application. The dual 100BASE-TX PHYs support line-side network connectivity and additional Ethernet-oriented functions where required. This combination can reduce controller-board area compared with separate MCU, Ethernet interface, and PHY implementations. For a motor-control board, keep high-current switching circuitry physically separated from the Ethernet and MCU sections, and validate synchronization behavior with the EtherCAT master and the firmware timing specified by Microchip.

🤖

Robotic Control Nodes

The LAN9255-I/ZMX020 can serve as the communications and control core of an EtherCAT-enabled robotic node because it integrates network physical layers, an EtherCAT device controller, and a microcontroller capable of handling local motion or sensor logic. The 2/3-port architecture and 100 Mbps dual-PHY implementation allow a node to participate in a line network while supporting additional local Ethernet connectivity. Its integrated SRAM is useful for EtherCAT process-image buffering and control variables, while the MCU handles application-level coordination. In a robot controller, isolate the controller from motor-drive transients, keep Ethernet differential routing away from switching nodes, and use the manufacturer’s hardware reference design to select magnetics and supply networks. Firmware selection and EtherCAT conformance remain separate from package-level substitution checks.

📹

Machine-Vision Ethernet Gateways

The LAN9255-I/ZMX020 is suitable for machine-vision gateways that must coordinate EtherCAT-connected equipment while exchanging data over an Ethernet network. The two integrated full-duplex 100BASE-TX PHYs provide dedicated copper-network interfaces, and the Cortex-M4F subsystem can handle protocol conversion, device status, and local control. At 100 Mbps, the Ethernet side is appropriate for industrial control traffic rather than high-bandwidth video transport, so image data should remain on a dedicated interface when required. Using the controller as a protocol or motion gateway can simplify board partitioning because Ethernet physical-layer circuitry is integrated with the application processor. The design should use controlled-impedance routing, suitable surge protection, and chassis-ground arrangements appropriate to the installation environment.

🧩

Distributed Sensor Hubs

The LAN9255-I/ZMX020 can support distributed sensor hubs that aggregate local sensing and actuator information for an EtherCAT master. Its Cortex-M4F processor is suitable for sampling, filtering, diagnostics, and data preparation, while the integrated PHYs remove the need for separate 100BASE-TX transceiver devices on each port. The available SRAM allows protocol objects and control buffers to be maintained without a separate external memory component. A sensor hub can place acquisition circuitry near the connectors and isolate its sensitive analog paths from Ethernet and processor sections. Use the datasheet reference layout for clock distribution and decoupling, observe the manufacturer’s Ethernet magnetics guidance, and test conducted and radiated emissions under the intended enclosure and cable configuration.

🖥️

Compact EtherCAT Test Equipment

The LAN9255-I/ZMX020 is well suited to compact EtherCAT test equipment because it combines device-controller functionality, two Ethernet PHYs, and an application MCU in one 128-pin package. The MCU can execute test sequences, collect diagnostic information, and present results through a local interface, while the EtherCAT section participates in a network under test. This integration allows a compact instrument to act as a slave device, network monitor, or service node without requiring separate Ethernet-interface components. The 100BASE-TX limit should be considered when defining expected throughput. For a bench instrument, use isolated communication boundaries where required, keep test connectors away from high-speed digital return currents, and validate timing behavior with the actual master and cable lengths used in production.

What is the LAN9255-I/ZMX020?
The LAN9255-I/ZMX020 is a Microchip 2/3-port EtherCAT device controller that integrates two 100BASE-TX PHYs and a 32-bit Arm Cortex-M4F MCU in a 128-pin TQFP package. According to the Microchip datasheet 00003646B, each PHY supports full-duplex 100 Mbps Ethernet, while the Cortex-M4F subsystem handles application-specific processing alongside the EtherCAT interface. The integrated 1.024 MB SRAM reduces the need for external processor memory in compact slave-controller designs.
What are the key specifications of LAN9255-I/ZMX020 that engineers should know?
The LAN9255-I/ZMX020 combines a 2/3-port EtherCAT controller, two full-duplex 100BASE-TX PHYs, and a 20 MHz Arm Cortex-M4F MCU in a 128-pin, 14 x 14 mm TQFP package. The manufacturer datasheet 00003646B identifies 1.024 MB of integrated SRAM, RMII, USB 2.0, and 100 Mbps Ethernet operation. Its system-in-package construction combines the LAN9253 EtherCAT controller, dual Ethernet PHYs, and SAM E53J MCU, making it suitable for compact industrial EtherCAT slave equipment.
Where can I download the LAN9255-I/ZMX020 datasheet PDF?
The official LAN9255-I/ZMX020 datasheet PDF is available from Microchip Technology at the document link published with this product. The manufacturer document is identified as 00003646B and is titled for the LAN9255 2/3-port EtherCAT device controller with integrated PHYs and SAM E53J MCU. It contains the authoritative device specifications, package information, electrical characteristics, and pin descriptions needed to begin a hardware design.
Where can I find the LAN9255-I/ZMX020 pinout?
The LAN9255-I/ZMX020 pinout is documented in the manufacturer datasheet 00003646B, using the 128-pin TQFP pin-description and package diagrams. Use the pin-description table to assign supply, ground, clock, EtherCAT, Ethernet, RMII, USB, memory, and control signals rather than inferring connections from a generic 128-pin drawing. The exact exposed-pad and thermal-land requirements should also be taken from the package information in that document.
How many Ethernet PHYs are integrated in LAN9255-I/ZMX020?
The LAN9255-I/ZMX020 integrates two Ethernet PHYs, and each PHY implements a full-duplex 100BASE-TX transceiver operating at 100 Mbps. Microchip datasheet 00003646B describes the device as a system-in-package combining the LAN9253 2/3-port EtherCAT controller with dual integrated Ethernet PHYs and the SAM E53J microcontroller. This dual-PHY arrangement supports equipment requiring more than one Ethernet connection or a segmented network interface.
Is LAN9255-I/ZMX020 suitable for industrial EtherCAT devices?
The LAN9255-I/ZMX020 is designed for EtherCAT device-controller implementations that require integrated local processing and Ethernet physical layers. Its 2/3-port EtherCAT architecture, dual 100BASE-TX PHYs, Arm Cortex-M4F MCU, and 1.024 MB SRAM suit distributed I/O, motion-control, robotics, and machine-control slave devices. Confirm the exact temperature range, supply limits, isolation requirements, and qualification status in datasheet 00003646B before releasing an industrial product.
What can replace the LAN9255-I/ZMX020?
The closest documented drop-in candidates are the Microchip LAN9255/ZMX020 and LAN9255-V/ZMX020, both associated with the same 128-pin LAN9255 controller family and the same EtherCAT, dual-PHY, Cortex-M4F, and 100BASE-TX architecture. The ordering-code suffix changes the intended grade or ordering configuration, so verify temperature range, qualification, and production requirements in the manufacturer datasheet. No directly comparable cross-brand drop-in replacement was established.
Is LAN9255-I/ZMX020 the same as LAN9255/ZMX020?
The LAN9255-I/ZMX020 and LAN9255/ZMX020 share the same Microchip LAN9255 system-in-package architecture, 128-pin TQFP format, EtherCAT controller, dual 100BASE-TX PHYs, and integrated Cortex-M4F MCU. The ordering suffixes indicate different grade configurations, but the exact electrical and temperature differences are not stated in the available product summaries. Treat the non-I version as a footprint-compatible option only after checking those details against datasheet 00003646B.
When should I choose LAN9255-I/ZMX020 over LAN9255-V/ZMX020?
Choose the LAN9255-I/ZMX020 when the design calls for the I-grade ordering configuration and the LAN9255-V/ZMX020 when the product plan calls for the V-grade configuration. Both provide the same stated 128-pin package, 2/3-port EtherCAT architecture, dual 100BASE-TX PHYs, and Cortex-M4F integration, so the PCB footprint can remain unchanged. The final grade decision should follow the manufacturer’s temperature, qualification, and ordering-code guidance in datasheet 00003646B.
Can LAN9255-V/ZMX020 replace LAN9255-I/ZMX020 on the same PCB?
The LAN9255-V/ZMX020 is a footprint-compatible replacement candidate for the LAN9255-I/ZMX020 because both are LAN9255 128-pin TQFP devices with the same stated EtherCAT, dual-PHY, Cortex-M4F, and 100BASE-TX architecture. A zero-pin-change replacement still requires a detailed comparison of temperature grade, qualification, supply characteristics, and firmware behavior. Manufacturer datasheet 00003646B is the controlling document for that verification.
What is the best cross-brand equivalent for LAN9255-I/ZMX020?
No cross-brand equivalent was established as a verified pin-to-pin replacement for the LAN9255-I/ZMX020. This device combines a proprietary EtherCAT processing subsystem, two integrated PHYs, 1.024 MB of SRAM, and a Cortex-M4F subsystem in one 128-pin package, so merely matching Ethernet speed or package pin count is insufficient. The documented alternatives are same-brand LAN9255 ordering variants, and any cross-brand design-in should require a complete electrical, pin, firmware, and EtherCAT conformance review.
Where to buy LAN9255-I/ZMX020 online?
Use the Request a Quote form on this page to request LAN9255-I/ZMX020 availability, current commercial terms, and lead time. The exact MPN is a 128-pin TQFP EtherCAT device controller from Microchip Technology, and the requested quantity should state the required delivery form and production quantity. This route provides a current quotation tied to the exact ordering code rather than an outdated catalog reference.
What is the price of LAN9255-I/ZMX020?
The current commercial price for the LAN9255-I/ZMX020 should be obtained through the Request a Quote form on this page. The part is a 128-pin TQFP EtherCAT controller with integrated dual 100BASE-TX PHYs and a Cortex-M4F MCU, so confirm that the quotation names the complete LAN9255-I/ZMX020 ordering code and the intended packaging. This ensures that the commercial response corresponds to the exact device rather than a related LAN9255 variant.
What is the lead time and stock status for LAN9255-I/ZMX020?
Current lead time, stock status, and minimum order quantity for the LAN9255-I/ZMX020 should be confirmed through the Request a Quote form on this page. Include your requested quantity, target delivery date, and packaging preference in the inquiry. The product is a 128-pin TQFP industrial interface controller, and confirming the complete MPN prevents lead-time discussion from being confused with the non-I or V-grade LAN9255 ordering variants.
How should LAN9255-I/ZMX020 Ethernet routing be designed?
Route both 100BASE-TX channels as controlled-impedance differential pairs with continuous reference planes, short connections to the Ethernet magnetics or coupling network, and minimal stubs. The integrated PHYs still require careful power, clock, and return-path design; placing PHY-support components and decoupling close to the device reduces susceptibility to common-mode noise. Follow the layout, component, and magnetics guidance in Microchip datasheet 00003646B and its referenced hardware design material.

工程参考数据: LAN9255-I/ZMX020 ——对比、设计指导和合规信息。

选型指南

Choose the LAN9255-I/ZMX020 when the product plan specifically calls for the I-grade ordering configuration of Microchip’s integrated EtherCAT controller. It is appropriate for industrial slave equipment that benefits from two full-duplex 100BASE-TX PHYs, a 2/3-port EtherCAT interface, and an integrated 20 MHz Cortex-M4F MCU with 1.024 MB of SRAM. The LAN9255/ZMX020 is a footprint-compatible candidate when the non-I ordering configuration is preferred. The LAN9255-V/ZMX020 is similarly suitable when the V-grade configuration is required, provided its grade-specific operating limits are acceptable. No cross-brand drop-in alternative was established because matching the EtherCAT subsystem, dual-PHY integration, memory, and 128-pin footprint is more demanding than matching Ethernet speed alone. In every case, verify temperature range, qualification, electrical limits, and firmware support against Microchip datasheet 00003646B before release.

与替代料对比

参数 本产品 LAN9255/ZMX020 LAN9255-V/ZMX020
Brand Microchip Technology Microchip Technology Microchip Technology
Package 128-TQFP (14x14) 128-TQFP (14x14) 128-TQFP (14x14)
EtherCAT Configuration 2/3 ports 2/3 ports 2/3 ports
Integrated MCU Arm Cortex-M4F Arm Cortex-M4F Arm Cortex-M4F
MCU Clock 20 MHz 20 MHz 20 MHz
Integrated SRAM 1.024 MB 1.024 MB 1.024 MB
Ethernet PHY Count 2 integrated 100BASE-TX PHYs 2 integrated 100BASE-TX PHYs 2 integrated 100BASE-TX PHYs
Ethernet Speed 100 Mbps 100 Mbps 100 Mbps
Interfaces RMII and USB 2.0 RMII and USB 2.0 RMII and USB 2.0

关键差异点

  • EtherCAT processing, Ethernet PHYs, and application MCU in one package (对比 LAN9255/ZMX020)
  • No PCB footprint change for V-grade sourcing (对比 LAN9255-V/ZMX020)
  • Integrated local application processing (对比 LAN9255-V/ZMX020)

设计说明

Implement each 100BASE-TX channel as a continuous controlled-impedance differential pair with a solid reference plane and minimal stubs. Keep PHY-support components and the connections to Ethernet magnetics or coupling components as short as practical. Route the two channels away from switching power stages and high-current motor-drive nodes, and apply the manufacturer reference-layout guidance in datasheet 00003646B.

Separate the controller’s core, Ethernet-PHY, and digital I/O supply networks as specified by the manufacturer, placing the required bypass capacitors at the associated pins. Validate startup sequencing, supply tolerances, and the maximum operating current before finalizing component selection. Estimated power dissipation cannot be stated without the selected supply voltage and operating-current profile, so use the electrical-characteristics table for the final thermal calculation.

Place decoupling, clock components, and Ethernet interface components close to their associated LAN9255-I/ZMX020 pins. Preserve the package’s thermal-land geometry specified in datasheet 00003646B and avoid placing high-temperature or switching components beneath the controller unless the thermal design explicitly accounts for them. Because the exact library diagram is unavailable for this 128-pin TQFP, use the manufacturer package drawing for land-pattern and pin-one placement.

Do not treat the LAN9255-I/ZMX020, LAN9255/ZMX020, and LAN9255-V/ZMX020 as interchangeable without checking the grade-related requirements. The shared package and functional architecture make them footprint-compatible candidates, but temperature range, qualification, and ordering details must be confirmed from manufacturer documentation. Also avoid assuming that integrated PHYs eliminate the need for Ethernet magnetics, surge protection, or correctly selected coupling components.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were found in the available product information. Confirm compliance for the exact ordering code with the manufacturer before procurement.

相关搜索

lan9255 i zmx020 lan9255 ethercat lan9255 board microchip lan9255 LAN9255-I/ZMX020 datasheet LAN9255-I/ZMX020 pinout LAN9255-I/ZMX020 datasheet pdf LAN9255-I/ZMX020 replacement LAN9255-I/ZMX020 equivalent LAN9255-I/ZMX020 vs LAN9255-V/ZMX020 LAN9255-I/ZMX020 footprint LAN9255-I/ZMX020 price LAN9255-I/ZMX020 stock LAN9255-I/ZMX020 application circuit

相关元器件 & 术语

Microchip Technology LAN9255-I/ZMX020 LAN9255/ZMX020 LAN9255-V/ZMX020 LAN9253 SAM E53J Arm Cortex-M4F EtherCAT device controller EtherCAT slave controller Ethernet interface controller 100BASE-TX PHY IEEE 802.3 RMII USB 2.0 industrial Ethernet industrial automation distributed I/O motion control system-in-package 128-pin TQFP 14 x 14 mm package 32-bit microcontroller 100 Mbps Ethernet 1.024 MB SRAM 20 MHz MCU clock
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情